Where do I find NI-CAN error messages and how do I interpret them?

I have the following error when using ncWait.vi: BFF62125. I am using NI-CAN 2.1.1. Can you tell me what this error means, in detail? Also ? I cannot find the error and status information in the NI-CAN 2.1.1 NI-CAN Hardware and Software manual. Can you tell me where I can find this type of information for NI-CAN 2.1.1?

There are 2 ways to find out.
1. use the utility that installs with NI-CAN. check out this link for details.
2. Use the NI-CAN programmer reference specification. This is a downloadable document for NI-CAN 2.0 and earlier.
or search NI for the following part number: 370289C-01
>>

Similar Messages

Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

I am so upset. Please read my messages from my postings. This has nothing to do with SIM Card, Hard Reset, Apps, Google Gmail Account, nothing. I have gone thru all of this and NOTHING has fixed this. I went to the store today and spoke to the manager on duty. He said he had to try and duplicate the problem before he could help me. I showed him "screen captures" I did, told him it's out here on the board, etc. etc. Needless to say I ended up coming home with the same phone, "he" erased the phone and started over again. Well guess what, it's not a error with "MY" Gmail account being corrupted because if that is the case Mrs. Hayden14 has a bad Gmail account too. If you guessed it, the phone just crashed again! I was able this time to capture a report with ALL the history in it and saved screen captures to PROVE to him this is not a joke. Even the report says "Crash". This time it was something else I don't even or ever have used. I have also wasted over a day , yes a full work day on this without question.
I have had to get the run around for the last day. This is totally ridiculous, including them putting me on hold for 55 min. Oh, that's another funny story. Anyways, tomorrow morning I am going to the Verizon store one last and final time and I hope they decided to do the right thing and give me a phone that does not crash and works. It would be handy at work for me, especially where I work at. I hope hope hope someone listens to and helps me. I would love for them to see me walk in, take my phone and say to me were going to get you another phone, hand it to me, see if it works and prove it's the device. I don't hear anyone having this issue on other phone types so sounds like its the phone type.
I have had 3 phones now in the matter of 2 weeks. I am sure the FedEx charges will add up to a cost of a new phone at some point and start to outbalance your requirement to give me the same phone when it has the same problem.
Can't wait to see what happens tomorrow.

Verbose Java Error Message and How to Turn Off

Hello Everyone,
Does anyone know of a way to turn off the Verbose Java Error messages that are generated via the Portal? Is there a Portal parameter or perhaps a parameter in the Config tool that can be used? I am simply trying to limit what is displayed to the user when error messages are generated.
Thanks,
Scott

Hi,
you mean the cryptic error message like:
Portal runtime error
Exception ID
There's a PAR: com.sap.portal.runtime.system.hooks.par
You should check the code, maybe this is the application responsible for these error message. If so, you'd have to make the modifcations there.
For 404, 401, etc, check:
http://wiki.sdn.sap.com/wiki/display/EP/CustomizingErrorMessagesinPortal
br,
Tobias

Where will I find the PS4 orbis os and how much does it cost?

Where can I FIND IT AND HOW MUCH DOES IT COST|???

Not really sure what you mean here... as the first half of your question points out, Orbis is the front end OS for Playstation 4. You can't exactly legally purchase it on its own...?

Don't understand error messages and how to resolve them

I am having error messages that are confusing. I thought any fonts I used that were not web safe or in Typekit would turn to images, and there would be no problem. What are these errors about? When I view the site in Safari everything looks the way it should.
Thanks for your help.
Here is the site:
http://marystephens.businesscatalyst.com/index.html

Hi
As you guess i 'am a newbie!
I don't understand Inner Classes, particulary
members(methods & fields) that an Inner method is
able to manipulate.
So I know that the methods of an Inner class
(respectively Outer Class) instance can access
members (private or public) of an instance of the
Outer Class (respectively Inner Class).
I tried to answer to a quizz :
http://java.sun.com/developer/onlineTraining/new2java/
supplements/quizzes/January03.html
In the following class definition, which variables
are inaccessible within the method of the inner
class?
class Test1 {
public static int a = 1;
private static int b = 2;
public int c = 3;
private int d = 4;
public static class Inner {
int e = 5;
public void aMethod(int f) {
int g = 6;
// What can't be accessed here?
}A.      b, c, d
B.      c, d
C.      b, c, d, f
D.      None of them
In my opinion members (public or private) of the
Outer Class can be accessed by methods of the Inner
Class; e.g: a, b, c,d thus for me the answer is
D.
Obviously i'm wrong, but why?Inner class method can access all the private members of the class. But the inner class is static. So the non-static members cannot be accessed directly (i.e. c and d).
***Annie***

Acrobat X Standard Updating error messages and how to make them go away?

I'm constantly getting messages about having a new update available for Acrobat X Standard. The following message always shows up after the update process: Error 1328.Error applying patch to file C:\Config.Msi'fl7088.tmp. Ithas probably been updated by other means,and can no longer be modified by this patch. For more information contact your patch vendor.

What version do you have today?

Where do I find the iTunes 10 plugins and how to add one?

I can't seem to find the iTunes plug-ins in the folder. Where are they and are there any new visualizers for iTunes 10 for Mac?

I am pretty sure that the folder for the iTunes plug-ins are here: /Library/iTunes/iTunes Plug-ins and /user/Library/iTunes/iTunes Plug-ins. The first folder allows all users to use the plug-ins, while the second folder only allows you to you use them. I am not entirely sure if these are the right folders since I have an older computer than you.

Where do iPhoto Journals show up in iTunes and how do I share them?

Playing with iPhoto for IOS today.
I created a basic test journal and tried to share it via iTunes.
But I have no idea where in iTunes it shows up .... I can't find it.
Anyone know where it goes or how to access a shared iTunes journal ?

In iTunes go to: Device > Apps > File Sharing > iPhoto

Where do I use These lock object FM's (Enqueue & D? and How do I use them?

I created lock object for user defined table (zconsist). The system automatically created 2 FM's (Enquiue & Dequeue).
I created a new TCode and accessing this with mulitple users to do some updates and inserts in that above table.
I used INSERT ZCONSIST statement in 5 places in my program (4 include programs).
Where do I use These FM's? and How do I use them?
I mean before inserting which FM I need to use? after immediately what fm used?.
every insert statemnt before i need to use the respective fm? so 5 places i need to call the respective FM is it right?
thank in advance.

Hi Sekhar,
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
check this link for example.
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
tables:vbak.
call function 'ENQUEUE_EZLOCK3'
exporting
mode_vbak = 'E'
mandt = sy-mandt
vbeln = vbak-vbeln
X_VBELN = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.
Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:
1. enque_lockobject
1. deque_lockobject
before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
GO TO SE11
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Lock objects:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
Match Code Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://searchsap.techtarget.com/tip/0,289483,sid21_gci553386,00.html
See this link:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Check these links -
lock objects
Lock Objects
Lock Objects
kindly reward if found helpful.
cheers,
Hema.

Where I can find the XML error messages repository?

Hi guys,
I don't know where I can find the XML error messages repository? (SXMB_MONI)
I found a structure SXMSMSGDSP! But this is only a structure... I need a table or something like a program who can handle this structure.
I think, this structure is used to shown an ALV, but first, a method read from memory and handle these data to ALV functions.
There is a simple table or a kind of way to access this data (error messages) and manipulate it?
Thanks in advance,
Ricardo.

Hi,
U can check Table <b>SXMSPERROR</b> in in SE11....
Regards,
Sridhar Reddy

I frequently get the "Firefox can't find the server" error message.

I frequently get the "Firefox can't find the server" error message. Refreshing the page normally causes the page to load, although sometimes it takes more than one try.
I have checked my connection settings. IPv6 and DNS prefetching are disabled, as recommended by this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at&r=1&as=s

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

Hi 99jon,
Many thanks for that. Had been going through this list yesterday and now again today:
Ref Solution 1: Lightroom is at its latest update
Ref Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
Ref Solution 3: Lightroom doesn't allow me to do anything after the error message appears
Ref Solution 4: don't have any Nik Software plug-ins
Ref Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
Ref Solution 6: I don't have a different user account on my mac.
Not sure what else to do.

HT4759 when i sign in to find my iphone, i get a error message and it closes, any ideas?

when i log into find my iphone on my pc, i get a error message and it will just close. can anybody help?

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

IDOCS - Finding the first error message when reprocess has been done 17000 times

I was hoping for some assistance. We have an automated reprocessing of our iDocs in one interface. I would like to find the first error message at status 51 in order to see the failure messge. Since the idocs have been reprocessed so many times, it cannot be found in the iDoc handler. Please advise if you have tips.

This message looks like homemade. And the message will not change, no matter how often you repost the same IDOC without having changed anything.
So you should at least see the message number to this message in the EDIDS table
You can search SCN using this number, you can search for OSS notes with this number, or you get active yourself in SAP and check the where used list from SE91 transaction to know in which program this error is triggered and under what circumstances

Cannot find tnsnames.ora error message

We are using oracle 10.2.0.1 via Toad. I get a cannot find tnsnames.ora file error message and see only a tnsnames.ora file in the sample file under the c:\ORACLE\product\10.2.0.1\NETWORK\ADMIN\ directory.
Do I need to create this file, and if so how do I do this?
Thanks in advance for your help
regards,
user12943453

Do I need to use the TNSNames Editor? No need for tnsnames.ora or SQL*net to access local DB
Can I just use direct connect and the sqlnet editor?YES!

Where do I find NI-CAN error messages and how do I interpret them?

Similar Messages

Maybe you are looking for