Where do I put in my code.

I want to start eprint but where do I enter my code?

Hi,
Instructtions should be on that piece of paper.
Here it is: http://www.hpeprintcenter.com/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Where do I put the "autoplay" code in my photo gallery?

I have a photo gallery on http://victorylcms.org/photos.html. I'm trying to add "autoplay" to it.
I got the gallery from http://galleria.aino.se/ and here is what it says to add http://galleria.aino.se/docs/1.2/options/autoplay/, but I can't seem to figure out where exactly to put it in my code to make it work properly. Thanks for any help!
autoplay
type: Boolean or Number
default: false
If true, this will start playing the slideshow with 5 seconds interval (default). If you set this to any number, f.ex 4000, it will start playing with that interval (in milliseconds)
Example:
$("#gallery").galleria({
autoplay: 7000 // will move forward every 7 seconds

I got the gallery from http://galleria.aino.se/
There's a support forum for that gallery
http://getsatisfaction.com/galleria/
here is what it says to add http://galleria.aino.se/docs/1.2/options/autoplay/, but I can't seem to figure out where exactly to put it in my code to make it work properly. Thanks for any help!
autoplay
type: Boolean or Number
default: false
If true, this will start playing the slideshow with 5 seconds interval (default). If you set this to any number, f.ex 4000, it will start playing with that interval (in milliseconds)
Example:
$("#gallery").galleria({
autoplay: 7000 // will move forward every 7 seconds
Look for similar code in your page
e.g. line 182

<script>
$('#gallery').galleria({
autoplay: 7000 // will move forward every 7 seconds
width:640,
height:480
swfobject.registerObject("FlashID");
</script>

I put in the code to get the digital copy for star trek into darkness, and i clicked download later, but it didn't show up in my movie library like the other movies i did the same thing to, where is my digital copy of star trek?

i put in the code to get the digital copy for star trek into darkness, and i clicked download later, but it didn't show up in my movie library like the other movies i did the same thing to, where is my digital copy of star trek?

Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants.

Where should I put my code?

Where should I put my code, on the buttons and other items in question, or in a separate Layer, referencing the items I need...?
Background :
I'm REALLY new to Flash with Adobe. I've used SwishMax a little in the past, but nothing of recent.
At work there's a project where I'm getting to use FlashPro CS6 and I've run into an odd issue with code to move forwards, backwards, and back to the beggining on 3 different buttons.
It's in a layer called Actions, and on frame 1 - And remember... uber newbie here folks, so forgive any glaring issues in my code that most people would see quickly...
//NEXT BUTTON
NEXT_BUT.addEventListener(MouseEvent.MOUSE_DOWN, nb_mouseDownHandler);
function nb_mouseDownHandler(event:MouseEvent):void
          this.nextFrame();
//MAIN MENU BUTTON
MAINMEN.addEventListener(MouseEvent.MOUSE_DOWN, mm_mouseDownHandler);
function mm_mouseDownHandler(event:MouseEvent):void
          gotoAndStop(1, "Scene 1");
//BACK BUTTON
BACK_BUT.addEventListener(MouseEvent.MOUSE_DOWN, bb_mouseDownHandler);
function bb_mouseDownHandler(event:MouseEvent):void
     this.prevFrame();
The code for the first two work's exactly as I need, the code for the back button, initially it only appeared on from the second frame onwards, but during debugging I've popped it on all pages. On the first frame, it takes you back to a black page with nothing on it, on all others it does absolutely nothing...
Another question as I've written above, should my code be in a separate layer regerencing the items it needs to affect, or... as a colleague told me in a ridiculously over the top brimming with distaste, create layers for each item, or groups of items and place the code in there... which to me, see's odd...
Thanks once again in advance, and I'm sorry to post such a newbie question, but the internet gives mixed anwers, not specific to my situation.
Tim.

In AS3 you cannot put code on buttons and other items like you could with AS1 and AS2. Beyond that, your choices are to place code in the timeline frame(s) or in separate actionscript files. While there are a number of recommended best practices, what usually works best is whatever you are able to understand and work with at the time. While there are benefits to having all code located in one place (a frame or a file) since it makes finding it much easier, when you are creating a timeline-based design, that is not always a possible/practical approach.
Over time you will gain experience with the different approaches and can make the choice based on that experience.

Hello, I'm having trouble getting to the page where I can put in my activation code for my One to One. I keep getting ID or Password error. Have already reset twice- HELP Plz.

Hello, I'm having trouble getting to the page where I can put in my activation code for my One to One. I keep getting ID or Password error. Have already reset twice… HELP Plz.

sashaburg wrote:
Unfortunately Netgear's support isn't very supportive.
Without Airport set-up, and without wireless connection, I can't talk between macs either.
Ok, this is a mac question: With the order changed so that the ethernet comes first, why is it still showing my connection to the neighbor's wireless? Am I reading that wrong? OR am I connected to both at the same time? If so, why would it connect twice to the internet?
Probably because you neighbor has no security on his network. Does his network show a lock like
If it does he's got security turned on, if there is no lock showing he hasn't turned it on.

What is the code to disable right click and where do I put it in reference to an image?

What is the code to disable right click and where do I put it in reference to an image?

There is no sure way to prevent people from right clicking on your webpage or taking images. This will tell you how:
http://www.dynamicdrive.com/dynamicindex9/noright.htm
Now if I have javascript disabled visiting your site, I can easily get around this because the code will not execute. Also I can simply view the source of your website and get the images. My suggestion to you is to rethink this because all you will end up doing is annoying visitors and make them want to get your images even more. The more you block people from something the more they want it. It's like telling a kid they can't have candy or something then they want it more.

Where should a put FCP?

I have been reading FCP for dummies, watching tutorials and reading the directions before installing the program. Now that I am about to install I remembered reading or hearing to install it in a certain place.
Should I install the application on my main dirve where the OS and Applications folder is or on a seperate brand new internal drive where I intend to put my video files as I load them from DV tape?
I was thinking it best to do the later but I want some input. If I should put FCP Studio on the newer seperate drive where do I put it? Do I make a new "applications folder" on this drive or just dump it on there anywhere?
Thanks for the help.

Captain,
Yes, I was taught the same thing about project files. Then I worked for/with some of the folks associated with this group...
http://www.creativeanimal.nl/files/eng/about.pdf
http://www.creativeanimal.nl/files/eng/technical.pdf
They all know what they are doing in a big way, and they were organizing the disks they were traveling from system to system, location to location, in the way I described above. I've working this way for several months without issue. That doesn't mean I won't in the future, though!
OK, captured material.
My client showed up with a UVW-1400 deck, when I was told it would be a DVW-A500. I own a AJA IO with 422 control. No such thing on a 1400. There are conversion options that might have worked, but I was on the side of a mountain in the Adirondacks.
No deck control equals no time code equals you lose your media, you start over.
Happily, I do travel extra firewire drives with me. I backed up my capture scratch every evening, in addition to the project, etc. I incremented the project name each day so I could avoid duplication - in my capture scratch folder I had incrimented folders repressenting my captures from day 1, day 2, etc.
I'm going to look into alternative ways of controling 25-pin RS-223C, from my 9-pin controller on IO. I'm not knowledgeable about this.
Love your story about the Mother's Day Project!
The project I refered to was a documentary about my son's kindergarten, that some how went from, vhs, imovie, and an imac to eight days of shooting with an xl-1, buying a media drive and learning FCP 1.2.
It was a difficult day when I learned about the not so nice relationship between Canon DV and FCP.
It was a difficult day when the project would not open.
It was a difficult day when the system drive on the imac started to make the funny little sounds just before it ground to a halt.
No wonder I stepped away until version 4.5!
Tom

Where do I put all my service classes?

I am new weblogic server environment. I want to know where do I put all my service classes? I am deploying all my servlet in WEB-INF/classes directory (under the context root) but donot know where to put the service classes. (The service classes have the jdbc and sql code in them. They are like simple java beans. I don't have any sql in the servlet classes).

<p>Hello,</p>
<p>If the only other classes that use your service classes are in your webapp then putting them under WEB-INF/classes is perfectly acceptable, you might want to wrap them up in their own jar file and stick them under WEB-INF/lib, it is up to you.</p>
<p>
Hussein Badakhchani</br>
</p>

Where do I put my Action Script?

So, I created a small Flash site with no loading of external
swfs. I am strictly using the timeline using labels. I have a layer
for my main buttons (home, portfolio and timeline). I have selected
AS3 for the file and I have those buttons working fine.
I have a button for my portfolio where thumbnails will pop up
after being pressed. I want to link those thumbnails to the URL's
of the actual websites. Where do I put the action script?
I also want to have my email at the bottom of the screen so
you can click on it to email me. I am used to using AS2 whwere you
simply put the code on the button.
Thanks,
Gabe

Hey, so thank you for the fast reponse. I totally agree with
you on learning AS3, I don't want to go back to AS2.
I already have the code you supplied so I understand what it
is doing but my question is where do I put it in this case? I
always create an action layer as you mention. In my action layer, I
have frame 1 with my preloader code and then frame 2 with my code
for my main buttons. They call to the labels. So, when I press
portfolio for example, it goes to that label.......a shape tween
starts and my portfolio thumbs appear. I then want those thumbs to
link to the URL of those sites.
So, where do I stick your code?
Thanks again for all your help. I am NEW to AS3 and this is
great learning.
Thanks,
Gabe

Where do I put passcode in 3g to activate bluetooh in car

where do I put passcode in iphone to activate handsfree

There is no sure way to prevent people from right clicking on your webpage or taking images. This will tell you how:
http://www.dynamicdrive.com/dynamicindex9/noright.htm
Now if I have javascript disabled visiting your site, I can easily get around this because the code will not execute. Also I can simply view the source of your website and get the images. My suggestion to you is to rethink this because all you will end up doing is annoying visitors and make them want to get your images even more. The more you block people from something the more they want it. It's like telling a kid they can't have candy or something then they want it more.

Where do I put in the iframe link and how?

Where do I put in the iframe link and how?
Thank you.

You paste ALL custom code in a HTML Snippet.
iWeb doesn't care about your code and will happily publish your stuff, whether it works or not. You are 100% responsible.
Read this : Using the iWeb HTML Snippet
And here's an alternative to the <iframe> HTML element :
iWeb : iframe alternative in the HTML Snippet

I wonder there is a way to put a query code when i make VSR.

After applying vsr, program, GBTC2IQ0 is automatically generated.
I want to know what kind of naming rule is applied for this name(GBTC2IQ0).
and where is it saved ?
Also, I wonder there is a way to put a query code(like select...) when I make VSR.
(* no badi.)

Hello, check Finder Preferences>General, & then the Sidebar tab also.

Where do I find extractor "program" code?

Hi Experts
Where/how do I find the code that the system runs when I am extracting data from a data source?
Example: I would like to see the program code for extracting data from the BC data source 0STOCKTYPE_TEXT?
Regards
Erik

Goto rsa3 , give the extractor name , Check the debug mode and execute it. it will take u to the code . If u want to check the code u have written put a break point there and then run.
else goto RSA2 give the name of ur DS .there u can get all the in formation of the DS. Goto extractor double click on it .it will take u to the code.

Where i should put external java library so UDF can import directly ?

Hi All,
I have some scenario using UDF and this code required a lot of external jar file. Please
advise me where i should put this JAR file so i can import directly from UDF without need to import using Import Archive ?
Thank you and best Regards
Fernand

Hi,
is there any other alternative rather than put in into import archive ? like i copy all ther Jar file into certain
directory in XI server and restart ther server so automatically, i can import insite my UDF wihout import archive ?
Thank you and Best Regards
Fernand

A question about variables and where I should put them!

Hi, I'm fairly new to java. I'm a first year computer scientist and I'm struggling with where I should put my variables.
So far on the course I've been able to wing it as we have not been doing object orientated programming, it was more like programming in fortran!
Anyway if you look at the code below, I need the variables 'speed', 'distance', 'time' and 'tottime', to be calculated in my seperate methods, but then called in my main part to be printed out; however I have no idea where I put them to get this to work!
The program is by no means complete, it's still a work-in-progress, but I need to get this sorted before I continue.
Thanks in advance
///// LogName: gxm07u
///// FullName:
///// CreationDate: 2007-11-07 09:30:07
import java.io.*;
public class travel {
    public static void printMenu()
         System.out.println("Travel Program\n\nn: Enter a journey\ns: Get complete journey stats\nd: Get Distance travelled stats\nq: quit");
    public static void RoadMenu()
         System.out.println("Type the road type:\nType m: Motorway\nType a: A road\nType b: B road\nType u: Urban road");
    public static void enterRoadType()
         char choice;
         choice = UserInput.readChar();
         switch(choice)
              case 'm': //motorway
              case 'M':
                   speed = 85;
              break;
              case 'a': // a road
              case 'A':
                   speed = 70;
              break;
              case 'b': //b road
              case 'B':
                   speed = 55;
              break;
              case 'u': // Urban road
              case 'U':
                   speed = 40;
              break;
    public static void enterDistance()
         System.out.println("Type the travel distance: ");
         distance = UserInput.readDouble();
    public static void calcTime()
         time = speed/distance; // time in hours
         tottime = tottime + time; //total time in hours
    public static void main(String[] argv) {
          int speed = 0;
          double distance = 0;
          double time=0, tottime=0;
     } // end of main
} // end class

Your calcTime() can't see variables local to other methods you either need to make them global or pass them in as parameters. To make them global:
public class travel {
     int speed = 0;
     double distance = 0;
     double time=0, tottime=0;
    public static void printMenu()also you're main method should create a instance of the class
    public static void main(String[] argv) {
new travel();
}BTW it's convention to make class names begin with a uppercase letter. Also, look at using the equalsIgnoreCase() for your switch statement as it could save you 4 cases.
Hope this helps

Where do I put in my code.

Similar Messages

Maybe you are looking for