Where/How Report Problems?

Where/How do we report problems?
I exported a small set of photos from LR3 to my desktop and then imported them into LR4.
All the photos are there. When I take a photo to the develop module, LR4 crashes.
I must be a slow learner, since I did this 4 times before deciding to try this forum.
Any ideas re: 'how to resolve' will be appreciated. I'd like to try LR4 with some of my older photos.
Thanks, Chris

Thanks! Your response got me on the right track.
The answer is that when I was in the Library, I needed to update all those photos to the current process before opening the Develop module.
The clue that I overlooked was the ! in the lower corner that indicates that the settings need to be updated.
Hope this helps.
Chris

Similar Messages

Where to report Problems with Acrobat 9 Pro

When highlighting text, the yellow color completely covers the text of the document.
Dawn Crosier-Bleuel

This is a 3D question - I don't see how to post to a better thread position.
I have Pro Extended 9.2 installed.
Attempting to make a PDF from a DXF file created by DesignBuilder crashes Acrobat.
Found and attempted to install 3D Update Ac9ExDupd.exe - fails with "No qualifying products found..."
Where is the complete reference on creating PDF from DXF?
Thanks

How/where to report service outage?

I have searched this site and can not find a place to report service outage. My service has been out for over a day, where can i report it?

I appreciate your response. To address your points about ways to report outages, we are in Reston and had no cell phone or FiOS phone service that day, and I don't know where any other phones are near us that I could use. I don't know how to use twitter or Facebook to report problems, but now that you mention those as possibilities I could figure that out.
My main point wasn't really that specific incident, however. That incident showed me that Verizon could provide a better system for handling general outages. What people want in cases like this is information; most of us understand that sometimes there will be large outages. It helps us to know that you know about the outage, and it also would help to have an idea what is being done about it.
Having that information online, with each subscriber able to add their outage information, would go a long way towards addressing this. You would then have a logical place to report on your efforts to repair outages. All of this could require less time for your support staff since this reporting system could be mostly automated. It would also help, then, when one person has a problem to see if others also have a problem (OK, just add my ino to the website and wait) or if they're the only one (OK, contact support.)

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

How to report problems??

Hi
This may be a dumb question, but how do I report problems with patches?
I can't find any place on this site.
Just to be on topic:
I have a problem with gethostbyname function. I have installed the latest 8_recommended patch cluster, and the problem which is claimed to be corrected is still there.
Thanks

Hi,
We are facing a rather strange problem with the latest kernel patch on Solaris 9. (Generic_112233-08). We had not faced this problem with any of the other kernel patches of Solaris 9.
Our application has a main thread and a single child thread (pthread). The main thread schedules aio_writes() on the raw disk interface and lets the child thread block on sigwaitinfo() to listen to the signal completion notification. This is communicated to it via the SI_ASYNCIO code of SIGPOLL. The child thread then informs the main thread by writing to a bi-directional pipe. Since the main thread has registered for read interest on the bi-directional pipe (via /dev/poll) it is informed of the completion of the aio_write() without having to block itself. Under normal circumstances, the child thread receives SIGPOLL with SI_ASYNCIO code.
This application has been running fine on all the previous builds of Solaris (Generic, Generic_112233-04, Generic_112233-06) on sparc platform expect with the latest kernel patch. The child thread now keeps receiving SIGPOLL with SI_NOINFO code. There has been no change in our application and we are perplexed to the reason of this behaviour. Since it is SI_NOINFO there is not much debugging information we can get.
We have been able to replicate this behaviour using a small stand-alone program. We are attaching it at the end of the email. We tried this program on a couple of different Sparc systems and were able to reproduce this behaviour on one of them but not on the other.
Has anybody faced problems with regard to SIGPOLL in the latest kernel patch of Solaris 9 for sparc systems ?
Thanks

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

HT2731 How to report problem in apps store double billing?

I noticed two different receipt that emailed to me. I did received one purchased only.
When click report problem in my emailed receipt but I can't connected to iTunes store?????

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

TS1702 how can I report problems, none of links will work they say from invoice! so FRUSTRATING

links won't work on itune store invoice, to report problem!

Have you tried the 'report a problem' link from your purchase history as opposed to the email receipt ?
log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If that doesn't work then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

Crystal report problem

Post Author: ranganadhkodali
CA Forum: Authentication
Dear Group Members,
I have a vary big problem with crystal report XI edition, I am
unable to find the cause of the problem actually.
I am using Crystal Report XI Developer version to build
reports in my development system, which I am, using SQL server 2005 as a
backend database and u201CUn-Typedu201D Pull
model for generate reports, in that my system those are working very good.
For distribute those reports to the other clients, I was
prepared one small windows application in .net and I placed one shared
directory. Application will show all report files placed under the shared
directory by the user selection.
If User selects one report, I am taking the selected report
from the shared directory and open with the .net embedded crystal report
viewer, while opening I was filling the
server login information(By code itself).
Any way application also working very well in my development
system, for deploys this application I added crystal report redist package that
is came with the visual studio 2008.
When I run the same application, in deployed
system, it showing login database dialog with empty database name, and one more
thing is that database text box also showing like disable. So even I unable to
give database credential with in dialog. I donu2019t understood what is the cause
of the problem?
Almost same problem was happen before 4 months back for some
other project, @ that time I rebuild my report with the PUSh model, and it
working well. But this case, I donu2019t have a chance to do like that, because daily
I should generate some kind of reports, needs of management. That management
staff will check reports from with that my distributed application. For these
all things, I canu2019t rebuild and redistribute my application every time if I add
new report. So that I placed one shared folder and, I keep update all changed
reports files in that shared folder, my application will show them.
What is the cause of the problem?
Is it problem with connection? Then it should not work with
in my development system also
Then it probably problem with the deployment? Then I am able
to view the initial report, problem came only when I refresh the data?
If problems with deployment, then how it is works for push type reports, it giving problem
for only pull type reports?
thanks and regards Ranganadh Kodali

Please visit:
www.geocities.com/pmk16
Regards,
pmk16

Error in downloading. Where's the problem?

I just joined Creative cloud, installed trial version of InDesign, tried to install Bridge, Photoshop and then Illustrator. With all of them i get this same info : Error in downloading. Where's the problem??

I was trying to download trial versions, with this creative cloud window popping each time after one trial downloading (Indesign-downloading went just fine, after it all I'm getting is this 'latausvirhe' notification = 'error in downloading').
Sorry - my mac speaks Finnish. No notes or codes, just this window and i don't know how to proceed.

TS1702 I have a charge on my CC that does not track to any purchases nor do I have an email receipt. Can anyone tell me where/how I can get this deleted (charge is from 04/08 so nearly two weeks old)? Thanks!

I have a charge on my CC that does not track to any purchases nor do I have an email receipt. Can anyone tell me where/how I can get this deleted (charge is from 04/08 so nearly two weeks old)? Thanks!

Apple could not tell you who else might be using your credit card, so there's no point in trying to contact them. All they could discuss with you is your own iTunes Store account, and if there's nothing in your purchase history, the charges almost certainly aren't coming from there. Again, you should take this up with your bank/credit card company and report these charges as fraudulent. They probably will cancel your card and issue you a new one.
Regards.

How to problem solve adf issue in the mx340 model

how to problem solve adf issue in the mx340 model

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

2.1 EA1 User Defined Report problem

Hi, I copiied Search Code item to User Defined Report and edited SQL (added union):
select
owner "Owner",
name "PL/SQL Object Name",
type "Type",
line "Line",
text "Text",
owner sdev_link_owner,
name sdev_link_name,
type sdev_link_type,
line sdev_link_line
from (select owner,
name,
type,
line,
text
from sys.all_source
where
(:OBJECT_NAME is null or
instr(upper(name),upper(:OBJECT_NAME)) > 0)
and (:TEXT_STRING is null or
instr(upper(text),upper(:TEXT_STRING)) > 0)
and name not like 'BIN$%'
--order by owner, name, type, line
union
select owner,
name,
type,
line,
text
from dba_source
where
(:OBJECT_NAME is null or
instr(upper(name),upper(:OBJECT_NAME)) > 0)
and (:TEXT_STRING is null or
instr(upper(text),upper(:TEXT_STRING)) > 0)
and name not like 'BIN$%')
order by owner, name, type, line
But I have problem - in result window, popup menu Go To <i.e.> MY_PACKAGE... doesn't work - no errors, simply nothing action. Original item works fine.
Where is the problem?
Petr

Your union code seems fine but there is already a go to bug report logged.
Already logged:
Bug 9196402 - GO TO TYPE NAME NOT WORK IN PLSQL REPORT
-Turloch

Reporting problems with iTunes

Does anyone know how to report problems with updates to iTunes to Apple? I cannot find any way to contact them to alert them to bugs and problems.

And if you're an ADC member (the Online membership is free), you can use Apple's Bug Reporter.

Where/How Report Problems?

Similar Messages

Maybe you are looking for