Where is Check number stored in Fusion Payroll

Hello All,
I am working on an Positive Pay file that is sent to the Bank after the payroll process and I need the check number details, but not sue where it is stored.
Can some one let me know where is the Check Number stored in the HCM tables.
In EBS
Check Numbers are in the field SERIAL_NUMBER on the PAY_ASSIGNMENT_ACTIONS table.
Serial Number in Pay_Assignment_Actions is where the check numbers are held. When Check Writer is run, the process requests STARTING and ENDING Check Numbers (Ending Check Number can be left blank).
But I am able to find the serial number in PAY_PAYROLL_REL_ACTIONS which is the payment reference and doesn't match the Check numbers that are generated.
Can any one please let me know where to find this information.
Appreciate all your inputs

>
Edward wrote:
> Dear All exprt,
>
> In Payroll , for basic pay there is a Indicator for indirect valuation. If this indicator is marked as 'I', the amount of basic pay will not be stored in table pa0008. But when we use PA20 , We can see the amount.Is there any table which store this kind of data?
>
> BR
I'm not sure if this gets stored in some database tables, I believe that this information is evaluated in the runtime(i.e., when accessed from 'PA20') using the wage type characteristics(v_t511).
The function module 'RP_FILL_WAGE_TYPE_TABLE' returns the values of indirectly evaluated wage types also.
The (indirect)evaluations of the wage types take place in the subroutine 'EVALUATE_INDEV_TAB' of the function group 'RPIB'. (Include program : LRPIBFXX)
Refer this thread
Re: Indirect Valuation Error Message in IT 0008
Regards
Rajesh.
Edited by: Rajesh on May 31, 2009 2:03 PM
reference thread added

Similar Messages

MIR7 Park Invoice - where is PO number stored?

Hi all,
When registering an invoice in transaction MIR7, I can enter one or more PO numbers in the field "Purchase Order/Scheduling Agreement" on the "PO Reference" tab. If I temporary save the invoice, then in which table is the link between the Invoice No. and the PO numbmer stored?
All invoices appear in table RBKP, but not always in table RSEG (which contains the PO number).
Same goes for EKBE, it contains quite a few of the invoices, but not all of them.
Your help is much appreciated!
Kind regards,
Bas

Bas,
You should find the PO numbers for the parked invoices in table RBSELBEST or RSEG. If the invoice is for a service entry sheet, you can can the SES number from table RBSELERFB and then subsequently get the PO number from table ESSR.
You will not have entries in RSEG only if you park the invoice without any item reference. In this case, you will not have a PO number associated with the invoice.
Hope this helps.
H Narayan

Where is version number stored?

I am using Adobe Director 11 to build an application which contains PDFs published by our company. I am using an XTRA to determine which version of Adobe Reader is installed on the end-users computer- our PDFs require version 7 or higher. My question is- where does Adobe store the version of Adobe Reader? In the registry? If so where? Is this consistent with all versions of Adobe Acrobat Reader?

mgalla3327 wrote:Jon,Thank you for the help, you were right on!Is it the IOS version causing me to have to go into vlan database to get to the commands?Just curious...Thanks again...
Matt
vlan database mode used to be the way to configure vlan/vtp information in IOS based switches. Then Cisco added the ability to use config mode to configure vlans. Some old switches like the 3524xl only support vlan database mode. Most newer switches support both but give you a warning message if you try to use vlan database about it being depreciated and to use config mode instead.
Jon

Where can I find the WEP password/number stored on my mac

Where can I find the WEP password/number stored on my mac.?

Assuming you saved it it will be in your Keychain (Applications > Utilities > Keychain Access)
Regards,
Shawn

Where is material revision number stored?

In what table is the material revision number stored (in Engineering Change Management)? I need to pull a list of all materials and their most recent revision number.
Thanks!

CHECK
MARA & AENR tables..

Sending PI message in case of Payment Cancellation and Check Number Voided

Hi ..
I've a requirement to send a message to PI wth the required invoice header fields whenver any payment document number is cancelled or check number is voided. I know we can cancel the payment or check payment through tcode FCH8 and the module program for this is SAPMFCHK.
I have no idea where would i put my custom code in the check payment cancellation wherein i can put my invoice fields and the proxy code so that I can send a message whenever any check payment or payment is cancelled.
Please help me if you have come with the similar requirement. I think i need to create an enhancement and put my codes inside that but not sure how do to this.
Thanks,
Shamim

Hi
I guess You need to create substitution for this purpose. In your case reversal document get created for your original FI document.
Go through http://wiki.sdn.sap.com/wiki/display/ERPFI/Creatinguserexitsforsubstitutions
First check GCX2 transaction if there is already any Z Program attached for your application area. If yes check if it is active in SPRO
Special Purpose LedgerTools-Maintain Validation/Substitution/Rules---Maintain Substitution
You can create substitution ZTEST under
Financial Accounting----Document header for field "reversal Indicator" and if you do F4 in field "Exit" you will see the exit created by you as per wiki.
I think you can create substitution on field "reversal Indicator" but its your choice. Check if your exit gets trigger.
Try creating a event to trigger proxy or submit program etc...
Hope this helps.
Regards
Vinit
Edited by: Vinit Joshi on Mar 9, 2012 8:20 PM

Invoice and Invoice amount in FI/CO When enter check number

Hi All,
I have a requirement like this. We have custom t-code ZF04 ( FAST CASH ) to post payments to customer accounts. In this t-code, we have one field for Check#. When they enter Check# number and click on 'SEARCH' icon i need to display list of invoices and amounts with in a check.
I have no idea about tables,. Where to look? What tables do i need to look when enter check number, which returns invoice details.
Please let me know ASAP....
I appreciate your help!
Thanks,
Suneetha

Hi,
One question - Are you getting customer payment trrough LOCKBOX? If yes, then following are the tables
Check tables FEBKO and FEBEP. The field is FEBEP-CHECT for check number. For this check number take FEBEP-KUKEY. With this KUKEY read table FEBRE. FEBRE-VWEZW is the invoice number.
So, sequence is
1. Put Check# --> FEBEP-CHECT and get FEBEP-KUKEY
2. Put FEBEP-KUKEY into --> FEBRE-KUKEY
3. FEBRE-VWEZW is invoice no.
If you are not using LOCKBOX, How are you getting customer payment? Let me know so i can give you exact answer.
Regards,
RS

TS3899 After updating to ISO6, my email sending get extremely slow or dispeard. on the botton line of mail page always indicate "sending # of 9", however I do not know where to check or delete these unsent items. Please help! It has consumed lots of data.

After updating to ISO6, my email sending get extremely slow or dispeard. on the botton line of mail page always indicate "sending # of 9", however I do not know where to check or delete these unsent items. Please help! It has consumed lots of data.
I use @me.com and @hotmail.com

Hi,
>>A CHAR datatype and VARCHAR2 datatype are stored identically (eg: the word 'WORD' stored in a CHAR(4) and a varchar2(4) consume exactly the same amount of space on disk, both have leading byte counts).
Ok, but on the other hands:
SGMS@ORACLE10> create table x (name char(10), name2 varchar2(10));
Table created.
SGMS@ORACLE10> insert into x values ('hello','hello');
1 row created.
SGMS@ORACLE10> commit;
Commit complete.
SGMS@ORACLE10> select vsize(name),vsize(name2) from x;
VSIZE(NAME) VSIZE(NAME2)
10 5
SGMS@ORACLE10> select dump(name),dump(name2) from x;
DUMP(NAME) DUMP(NAME2)
Typ=96 Len=10: 104,101,108,108,111,32,32,32,32,32 Typ=1 Len=5: 104,101,108,108,111Cheers

Check number not filled into FPAYHX-CHECK

Hi
I am trying to use a DMEE based format for check payments. When executing the payment run, however, the field FPAYHX-CHECK is not populated.
What have Idone:
1) I have defined an payment method where we have set the indicator that a check will be created using this payment method. This payment method uses the a payment medium workbench format. In the DMEE I have mapped the field FPAYHX-CHECK to the field check number.
2) I entered a vendor invoice with t-code FB60 with the payment method defined in step 1
3) I executed the proposal, the payment and the payment medium creation with F110
4) The payment file does say it is a check, the field check number, however, is empty
I have found out that the field FPAYHX-XSCHK is populated with 'X', the field FPAYHX-CHECK is empty.
Am I forgetting a step? What went wrong? I'd be glad for some help.
Regards
Kris

Hi ,
did you defined Check Lot for payment Method C in FCHI for your House bank and acount ID .
Many Thanks

Check number print with two zero starting

I want add to zero before check number, example 4562 to be printed as 004562.
SELECT 'xxxxx' as 'Debit A/c No',
T1.DocDate as 'Date',
T1.DocNum as 'Txn Ref',
T1.CardName as "Benificiary Name",
'CHK' as 'Payment Type',
T1.DocTotal as 'Payable Amount',
' ' as 'Benificiary A/c No',
' ' as 'IFSC Code',
' ' as 'Type of A/c',
'Bangalore' as 'Pay Location',
'Bangalore' as 'Print Location',
'4' as 'Delivery Opt',
' ' as 'DOP',
' ' as 'Bene. Address 1',
T5.CheckNum as 'Cheque Number',
' ' as 'Print Date',
T4.NumAtcard as 'INV Number',
' ' as 'Inv Date',
' ' as 'INV Description',
' ' as 'Gross Amt',
' ' as 'TDS',
T3.SumApplied as 'Net Amt',
' ' as 'email I D 1',
' ' as 'email I D 2',
' ' as 'email I D 3',
' ' as 'email I D 4',
' ' as 'email I D 5'
/* From */
FROM dbo.OCRD T0
INNER JOIN dbo.OVPM T1 ON T0.CardCode = T1.CardCode
INNER JOIN dbo.VPM2 T3 ON T3.DocNum = T1.DocNum
INNER JOIN dbo.OPCH T4 ON T4.DocEntry = T3.DocENtry
INNER JOIN dbo.VPM1 T5 ON T5.DocNum = T1.DocNum
/* Where */
WHERE T1.DocDate >= [%0] AND T1.DocDate <= [%1]
/* Order */
ORDER by T1.DocDate

Hi,
Please try this,
SELECT 'xxxxx' as 'Debit A/c No',
T1.DocDate as 'Date',
T1.DocNum as 'Txn Ref',
T1.CardName as "Benificiary Name",
'CHK' as 'Payment Type',
T1.DocTotal as 'Payable Amount',
' ' as 'Benificiary A/c No',
' ' as 'IFSC Code',
' ' as 'Type of A/c',
'Bangalore' as 'Pay Location',
'Bangalore' as 'Print Location',
'4' as 'Delivery Opt',
' ' as 'DOP',
' ' as 'Bene. Address 1',
'00'+CAST(T5.CheckNum AS NVARCHAR(20)) as 'Cheque Number',
' ' as 'Print Date',
T4.NumAtcard as 'INV Number',
' ' as 'Inv Date',
' ' as 'INV Description',
' ' as 'Gross Amt',
' ' as 'TDS',
T3.SumApplied as 'Net Amt',
' ' as 'email I D 1',
' ' as 'email I D 2',
' ' as 'email I D 3',
' ' as 'email I D 4',
' ' as 'email I D 5'
/* From */
FROM dbo.OCRD T0
INNER JOIN dbo.OVPM T1 ON T0.CardCode = T1.CardCode
INNER JOIN dbo.VPM2 T3 ON T3.DocNum = T1.DocNum
INNER JOIN dbo.OPCH T4 ON T4.DocEntry = T3.DocENtry
INNER JOIN dbo.VPM1 T5 ON T5.DocNum = T1.DocNum
/* Where */
WHERE T1.DocDate >= [%0] AND T1.DocDate <= [%1]
/* Order */
ORDER by T1.DocDate
Thanks

Check number skipped

Hi Everyone,
When we run F110 payment program. The system will print all the checks included in the payment run but skipping a number and marking that number as void.i.e: If system prints check no.300156, it skips the 300157 number and marking this as a void (page overflow) and replacing this check info to next number 300158.So we will have all the checks but not in sequence.Is there any are where I need to llo0k at ? Thanks
Iqtidar

Hi,
Kindly check on the variant you created in F110 Printout/data medium tab, make sure that on the output control, field "Do not void any Checks" should be ticked so that it will continuously run the check number in sequence.
Hope this helps you.
Thanks,
Rod

Check Number

Dear Experts
I have created one FMS for payment means check Number has to come in incoming payment reference colomn. the FMS is SELECT T0.CheckNum FROM RCT1 T0 WHERE T0.CheckNum = ${28.5.0} . But the value is not come. what i have to change.
regards

Hi,
if i understand you correct, you want to pick up a screen value ${28.5.0} from a non active window. Thats not possible. If you pick up from an active window, you need to use other brackets like :
$[$28.5.0]
Regards Steffen

Check number field coming in blank

I am new to this forum, and I am searching but canu2019t find a solution.
I have a database, which contains a field called u201CCheck Nou201D, which contains the check numbers as well as type of payment received from a contributor.
So, if the contributor paid which a check, then the check number is there, but if they paid by money order, pay pal or cash, then those terms are there.
The problems is when I bring the data into CR, it is only bringing over the check numbers, as number.
Now, I wrote a formula to convert the numbers to text, but it still is not reading the literal data, u201Cmoney order, pay pal or cashu201D.
The formula that I wrote is:
If {2009.CHECK_NO} = 0.00 Then
"*CASH*"
Else
ToText ({2009.CHECK_NO},0,"")
and believe, it or it works, u2018cause the check numbers come in great.
I called tech support up and they told me something about marking the field as u201Calphanumericu201D, and to look to the forum for a solution, or else pay $195 per incident for tech support.
I figure this must be a common occurrence, u2018cause all organizations maintain some type of check register, and there are times, now a days when pays with something other than a check, e.g. wire transfer, debit card, etc.., and if that literal text is in the check number field, Iu2019d like to bring it over as such.
Thx in advance for answering my question.

Here is the formula I have in my CR report:
ToText ({Sheet1_.F3},0,"")
and here is the result I get:
Check No
4204
6008
448
2079
13495
1216
369
320
2227
231
139
351
524
1562
402
5098
1109
2240
922
Where the blank lines are records containing text entries in that field, such as "cash, credit card, paypal".
My problem is that no matter what I'm trying, the numbers come across fine, but now the literal text isn't.
I've tried some variation of the formula as follows:
If IsNull({Sheet1_.F3}) then "" ELSE
if not(Isnumeric({Sheet1_.F3})) then ({Sheet1_.F3}) else 1
As a suggestion from the board, but when I check for errors, I get various errors such as "string needed" or something else.
I'm getting lost on this.
And, I'm sure it is something simple, but I just can't grasp it from the manual or help screen.
Please help!!

How to find out where sap error messages stored...

How to find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

Hi,
I also got the same message when that message no is not there
E:SABAPDOCU:000 test
yours is S-type and message id ZY and message no 127
127 is not there either change the no or create the same
Regards
Shiva

How to find out where sap error messages stored in our system

How to find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

Are you interested in WDA messages ?
The set a breakpoint in METHODS IN class CL_WDR_MESSAGE_MANAGER.
Then use call stack (default desktop 2 in debugger) to see where message is added to message manager.
regards
phil

Where is Check number stored in Fusion Payroll

Similar Messages

Maybe you are looking for