Where is SAML Relying Party configuration stored?

We are successfully configuring SSO using SAML 1.1 using either the console or WLST scripts. We have 3 different Relying Parties and everything works great. However, after restarts, our Relying Parties are gone! I assume that WLST and console both are updating the Mbean behind the scenes, but where does the SAML Relying Party configuration get persisted since we are not using the RDBMS store. Internal LDAP? An XML file? I can't find it documented anywhere.

The StationGlobals.ini file is in your TestStand Config directory, which is found at <TestStand Application Data>\Cfg.
On Windows 7, this is C:\ProgramData\National Instruments\TestStand 4.2\Cfg. I don't remember off-hand what the exact path is on versions of Windows earlier than Vista... Somewhere under C:\Documents and Settings\<Username>\. You can just search for StationGlobals.ini if you need to.

Similar Messages

ADFS Taleo Relying Party Configuration

Hi,
I'm trying to configure Oracle Taleo as a relying party for AD FS and the AD FS as identity provider for Taleo.
AD FS Configuration
I have uploaded XML Taleo federation metadata in relying party configuration wizard and everything seems correct. I have created claim-rules to return email address in Name ID attribute with unspecified format.
Taleo Configuration
When I try to sign in, browser is correclty redirected to AD FS, AD FS returns a SAML response containing email address in name ID attribute (logged with Fiddler), but Taleo returns Internal Server Error 500.
Do you see anything wrong in this configuration? IdP identifier? Authentication URL? and more important the certificate: it is possible to select only one certificate, so which certificate should be uploaded SSL, token encryption or token deryption? in which
format? binary base 64?
I'm trying to troubleshoot this error since one week also with Taleo support, but we didn't find anything. If you have already configured Taleo or you have any idea, let me know.

Ok, I have an update from the vendor, it is an error log:
I have some error reported by our Cloud Operations team I hope they will help you get a general idea:
<< Report from Cloud Ops>>
Feb 17, 2015 5:28:17 PM EST
Error FED-18074 Signature verification failed for provider ID http://*****.com/adfs/services/trust
Feb 17, 2015 5:28:17 PM EST
Error FED-12064 Exception: {0}
Feb 17, 2015 5:28:27 PM EST
Error FED-10146 Could not locate the X.509 certificate forhttp://****.com/adfs/services/trust, for use signing
Feb 17, 2015 5:28:27 PM EST
Error FED-12064 Exception: {0}
Feb 17, 2015 5:28:27 PM EST
Error FED-15131 Certificate was missing when trying to verify digital signature.
The problem is related with certificates, because we have uploaded several certificates and now I think Taleo is not able to find the right one. Since all errors are related to signing certificates maybe I have to select this one.

Where is the station options configuration stored

Where is the station options configuration gets stored in TestStand 4.2.1?
Solved!
Go to Solution.

The StationGlobals.ini file is in your TestStand Config directory, which is found at <TestStand Application Data>\Cfg.
On Windows 7, this is C:\ProgramData\National Instruments\TestStand 4.2\Cfg. I don't remember off-hand what the exact path is on versions of Windows earlier than Vista... Somewhere under C:\Documents and Settings\<Username>\. You can just search for StationGlobals.ini if you need to.

In general, Where is AddOn local configuration stored?

Hi Experts,
In general, Where is AddOn local configuration stored?
I am using an AddOn, I have a local network and Windows 2008 Terminal Server (TS). I installed this AddOn in three companies from a LAN PC, and its working fine there from local computer but not in the TS. In Terminal Server just works in two companies but not in the third one. In the third one appears under AddOn Administration, it is assigned to the company and to the user but when I go to the AddOn Manager It does not appear in pending AddOns neither in installed AddOns, so I am not able to start it.
Any ideas, Is there a file that holds the local AddOn configuration that I can I just can modify in order to establish the same parameters that SAP is using for the other companies?
Which files, registry keys and tables are involved in AddOn configuration?
Thanks

It would store in C:\Program Files\SAP\SAP Business One\ AddOnsLocalRegistration for a particular client machine.
Delete the file following <AddOn Exe and ends with AddOn></ADDONS> which you have installed previously.
Reinstall your add-on definitely it will work.

Where are my settings for Firefox stored so I can configure my new PC?

Everytime I change my laptops or start from scratch, do I have to configure firefox all over again (i.e. fast dial, add ons, appearance)?
I only know how to backup and restore bookmarks. Where are all my configurations stored? Please someone tell me?
Thank you
MVitoi

The user data is stored in the profile folder. You can copy the data manually by copying the contents of the profile folder, for details see http://kb.mozillazine.org/Profile_backup or https://support.mozilla.com/kb/Backing+up+your+information
The free MozBackup utility that can make this process easier - http://mozbackup.jasnapaka.com/

SAML Credential Mapper Relying Party "Post Form"

Hi,
Has anybody used Custom Post Form for SAML credential Mapper Relying Party.
If so can you pls tell the specs. It is saml V2
I am trying like this in a html
<input type="hidden" name="TARGET " value="ddddd" />
<input type="hidden" name="SAML_AssertionConsumerURL" value="ddddddd" />
<input type="hidden" name="SAML_AssertionConsumerParams" value="homogenousMap" />
<input type="hidden" name="SAML_ITSRequestParams" value="" />
But everytime it gives a Internal server error in the logs
####<Oct 13, 2008 2:16:19 PM PDT> <Debug> <SecuritySAMLService> <pd7000163> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1223932579244> <BEA-000000> <SAMLServlet (samlits): doGet(): Unexpected throwable while handling request, returning INTERNAL_SERVER_ERROR: java.lang.NullPointerException>
I am also not finding any details about samlits servlet.
WEblogic front line support also does not know. No weblogic documentation on the actual implementation.
Thanks
Vishnu

Vishnu, you should also try cross-posting in the WLS-Security forum.
WebLogic Server - Security

ADFS 3.0 WAP and Non-Claims-Aware Relying Party Trusts

I am attempting to migrating a Windows Claims SharePoint page to ADFS 3.0 (Windows Server 2012 R2) and the WAP (Web Application Proxy) from UAG, but are running into problems when our external users attempt to authenticate. Users from our external
domain (call it Domain2.com) have been accessing our SharePoint pages via SAML tokens but when I attempted to move them to the new WAP and off of UAG, they get a http/500 error. The WAP error log gives the following:
Warning Event ID 13016 - Web Application Proxy cannot retrieve a Kerberos ticket on behalf of the user because there is no UPN in the edge token or in the access cookie
Error Event ID 12027 - Web Application Proxy encountered an unexpected error while processing the request. Error: The specified username is invalid. (0x8007089a).
I presume the Error Event ID 12027 is because there is no UPN in the token and we are using KCD/Kerberos so I need to pass a UPN.
The ADFS server and WAP are joined to Domain1.com. Domain1.com is Active Directory and there is an account for every user in Domain2.com that is allowed access to our SharePoint Sites. These account contain the standard
info... UPN, Email Address, sAMAccountName, etc. The UPN, Email, and sAMAccountName do not always match the accounts with the Domain2.com accounts; however, we have been using an Active Directory Field labled employeeNumber that is synchronized
on both domains and we have been using a custom lookup based on the employeeNumber in AD.
When login's occur via Domain1.com, no problem, the UPN is pulled from the Active Directory Claim Provider Trust. When a user attempts to access from Domain2.com, we have configured ADFS to forwards them to an STS that collects the employeeNumber
from Domain2.com via a Web Auth SAML token. We are able to use the SAML token if we use the standard Claims-Aware Relying Party Trust (CARPT) and convert our SharePoint sites to use the trusted URN via powershell scripts, but we are trying to retain
functionality similar to how we are using UAG so we don't want to change every single SharePoint site to the SAML configuration, hence we are trying to use the Non-Claims-Aware Relying Party Trust (NCARPT)
Problem1: When we are using CARPT we can configure the custom translation for our employeeNumber lookup in AD. But CARPT uses SAML Tokens not Kerberos Tolkens so we cannot login when SharePoint is configured for Kerberos.
Problem2: When we are using NCARPT it works great when authenticating via local (Domain1.com) credentials and look's up the user in AD, but when we attempt to authenticate with remote (Domain2.com) credentials we are unable to configure the employeeNumber
lookup and ADFS doesn't just go out and make that correlation on its own.
Question1: Can I configure CARPT to use Kerberos?
Question2: If not, can I configure NCARPT to lookup the AD employeeNumber, match the UPN, and add the UPN to the token?
Question3: If neither option is available, am I just stuck with UAG or is there something out (not scheduled for EOL) there that can handle the translation between SAML and Kerberos Tokens?
Let me know if I left something out, I tend to ramble, but not sure of all the info that is needed...

Hi,
Based on the description, is there trust between domain 1 and domain 2? If not, we can try to create trust between these two domains to see if it helps.
Regarding Event ID 13016 and Event ID 12027, the following article can be referred to for more information.
Web Application Proxy Troubleshooting
https://technet.microsoft.com/en-us/library/dn770156.aspx
Besides, for ADFS questions, in order to get more and better help, it's recommended that we ask for suggestions in the following forum.
Claim based access platform (CBA), code-named Geneva
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Where should i store application configurations?

Hello all,
i have a little problem. I read a lot of posts in this forum with the same problem, but no anser was satisfiable for me. Where should i store application configurations? For example, where can i store error descriptions (text) for errors with a special id. There is no way to do it in the webconatiner, because the ejb's should log their errors. File I/O operations are forbidden by the specification, so the use of ResourceBundles with propertie files should be forbidden, too, isn't it? Is there another way than storing the error description in a database?
I hope you can unstand my question and someone have a solution for my problem.
thanks & regards
Ren� G.

You can use an entity bean with your configuration.

Party Configuration

Hi
My scenario: SAP ECC -> SAP PI -> Web Service -> B2B Gateway
In SAP ECC we 20 the partner is created as V02 (same as B2B trading partner name) of type "SP". When the IDOC reaches PI it fails showing the error in moni as "Party and Service not defined".
I have read this blog /people/shabarish.vijayakumar/blog/2006/09/13/wanna-party and configured party and business service for the receiver and business service for ECC sender. But reprocessing the IDOC from we19 in ECC the message again fails in moni with the same error.
In the party configuration, I gave the following values:
Agency: SAP
Scheme: ALE#SP
Name: V02
I am doubting that my agency value is not right. Can it be any arbitrary value or should be related to ECC system/client name. Please help.

Hi
To give further information
Scenario: SAP ECC-> SAP PI -> Web Service -> B2B Gateway -> Trading Partner V02
The IDOC control record looks like this
<EDI_DC40 SEGMENT="1">
<SNDPOR>SAPVDO</SNDPOR>
<SNDPRT>SP</SNDPRT>
<SNDPRN>MTD</SNDPRN>
<RCVPOR>A000000003</RCVPOR>
<RCVPRT>SP</RCVPRT>
<RCVPRN>V02</RCVPRN>
</EDI_DC40>
Now I have configured a party named TP_V02. Created a business component called TP_V02_B2B in it. Then in the party configuration added the Agency=TP_V02_B2B, Scheme=ALE#SP and Name=V02. This is for receiver system.
For sender I created a business component without party and called it SAPVDO and added adapter specific identifiers where logical system I have given as SAPVDO.
I am still getting the error in moni as Party and Service not defined.

Where are sound and sharing settings stored in plist on mac mini?

Hi,
Does anyone know where are sound and sharing preferences stored in plist on mac mini on OS 10.8?
I want to auto-configure these settings for a bunch of computers instead of manual configuration through the system preferences menu.
Anyone has any advice?
Thanks.

App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the Firefox profile folder.
* http://kb.mozillazine.org/Session_Restore
* http://kb.mozillazine.org/sessionstore.js
* http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox

Where are nokia email files are stored

i want to save my phone memory because i have 4GB card I want to save all my email nd messaging data on card. So where are the emails store if my msg settngs are set to phone memory if i set it to memory card all the emails will be saved in card?
Another question plz i m usng nokia e5 once i changed msg memory from phn to card it askd me to copy msgs but again when i tried it its now askng to copy msgs why?
Some one plz ans
thank you

The STR files are only briefly stored in this location until they are
processed by the database.
They are then deleted.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"Tim Rath" <[email protected]> wrote in message
news:QbA3j.2673$[email protected]..
>I have a standalone inventory server running NW 6.5 with around 300 XP
>workstations attached. A couple of questions:
>
> Where are my str files? The Scan Directory Path in the inventory service
> object is set to \sys\zenworks\Inv\ScanDir, but there are no str files
> there. Workstations are being updated and showing correct info. The db
> files are showing current modification dates. Is that where all of the
> info is stored now?
>
> Also, when I generate a report from C1, even a quick report, the CPU jumps
> to 100%. Is this normal even with only 300 workstations to scan? I ran
> sybindex, but that didn't help. Would I be better off configuring the
> Windows ODBC for reports? Thanks.

Cannot log in to OBIEE relying party trust

Hello everyone!
I have deployed an environment in two locations.
The first one contains:
2 x Domain Controllers (let's name it DC1 and DC2)- both are connected through vpn to the 3rd domain controler( DC3) in second location
5 x ADFS Servers connected to the load balancer - there is no connection between ADFS servers and 3rd domain controler(DC3) in second location
The second contains:
1 x Domain Controller (DC3)
2 x Clustered OBIEE servers connected to the DC3's AD LDAP. Also these servers are connected to the LB and are accessible from the internet
If I had test environment containing OBIEE servers in first location everything was ok. I could log into OBIEE weblogic servers through SSO (ADFS).
Now there is a problem. I can't log in to OBIEE becouse I am getting on OBIEE site 403 - forbidden.
In ADFS logs all the time I am getting when I am trying to connect OBIEE following error:
Microsoft.IdentityServer.Web.InvalidRequestException: MSIS7042: The same client browser session has made '6' requests in the last '2' seconds.
I read many articles in oracle support and microsoft sites wchich indicated on:
differences between network time servers - I synchronized the time between all servers.
permissions for users and groups who can access to the obiee - I did it
The main question is: Is it possible the problem persists becouse my DC3 is not connected to the ADFS servers?

If your AD site topology is correctly configured, with the appropriate subnets bound to that site, then it should use the DCs in Location 1... also, when you say there is no connectivity between ADFS in Location 1 and DC#3 in Location 2, is that a firewall
rule prohibiting that? Presumably, DC#1 and DC#2 are able to replicate across the VPN to DC#3? Just curious why AD FS is unable to "reach" DC#3? btw...If you turn on trace logging in AD FS do you see the expected claims being surfaced for the relying
party?
http://blog.auth360.net

I downloaded music from iTunes onto my iPad. I enabled iTunes Match on my PC (where most of my music is stored). When I turned on iTunes Match on iPad it said the iPad music library would be replaced.How do I use iTunes Match without losing iPad music.

I bought music from iTunes and downloaded it to my iPad. I have enabled iTunes Match on my PC (where most of my music is stored). When I turned on iTunes Match on iPad it said "iTunes Match will replace the music library" on my iPad. All of my iPad music is saved on iCloud, and some of my PC music is on iCloud. If I use iTunes Match will the music previously downloaded on my iPad be lost?
Thanks!!

You need to either sync the iPad with iTunes so it will transfer the purchases to the iTunes library or download them from the purchase history. Then let iTM work on the "new" tracks in the library then all the music will be available on the iPad.

[svn] 3519: Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service .

Revision: 3519
Author: [email protected]
Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
Log Message:
Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xml

Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲

Where are my Web Form entries stored in the webBasics plan?

Where are my Web Form entries stored in the webBasics plan? Currently—in my trial site—I can access Web Form responses through a Custom Report. Will this option be available to me in the webBasics plan?
My hope is to use the webBasics plan with a Web Form (and a few custom fields) and have the reponses stored for me in the Businsess Catalyst interface.

You do not get the CRM element of BC with the webbasic plan. With BC storing the forms it creates "cases" Which are stored against the "Customer" in the "CRM". You dont have access ot that with the webbasic plan.

Where is SAML Relying Party configuration stored?

Similar Messages

Maybe you are looking for