Where is the place/field to enter the website that I wish to see upon opening

I had Mozilla set up to open with the start.earthlink.net website. Now it's not happening. What bumped me out of that setting, and where do I find the dialog box to reset to that location?

See - [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page How to set the homepage]

Similar Messages

How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?

How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.

Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
     DATA ls_context TYPE wd_this->element_context.
     DATA lv_visible TYPE wd_this->element_context-visible.
*   get element via lead selection
     lo_el_context = wd_context->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_context IS INITIAL.
     ENDIF.
*   @TODO fill attribute
*   lv_visible = 1.
*   set single attribute
     lo_el_context->set_attribute(
       name = `READONLY`
       value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
     DATA lo_el_input TYPE REF TO if_wd_context_element.
     DATA ls_input TYPE wd_this->element_input.
     DATA lv_vbeln TYPE wd_this->element_input-vbeln.
*   navigate from <CONTEXT> to <INPUT> via lead selection
     lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
*   @TODO handle non existant child
*   IF lo_nd_input IS INITIAL.
*   ENDIF.
*   get element via lead selection
     lo_el_input = lo_nd_input->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_input IS INITIAL.
     ENDIF.
*   get single attribute
     lo_el_input->get_attribute(
       EXPORTING
         name = `VBELN`
       IMPORTING
         value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->element_context.
    DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
    lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
    IF lo_el_context IS INITIAL.
    ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
    lo_el_context->set_attribute(
      name = `READONLY`
      value = ' ' ).

Hi I have a Creative Suite CS5 Master Collection. I want to upgrade to CSS but when I write all the required fields to obtain the special price, I have an Error Message. Is there a phone where I can have a response?

Hi I have a Creative Suite CS5 Master Collection. I want to upgrade to CSS but when I write all the required fields to obtain the special price, I have an Error Message. Is there a phone where I can have a response?
I´m from Mexico
Thanks a lot

Under this address, CC has been purchased in July 21st, 2014, that is the reason it is not allowing further purchase as under one Adobe ID, only one subscription of CC( Individual, single app, Team) can be activated & used.
Regards
Rajshree

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

Get the custom fields data at the time of save

Hi,
We have added few fields in the ICWC for the complaint screen.
At the time of save i am trigering a BADI.
I would like to check the data that is entered in those fields of complaint screen.
Is there any FM which can be used to get the data from the buffer ?
I have the header GUID available to me .
Thanks.
R

Hi,
Let me elaborate a bit.
Users would create the complaints in the ICWC.We have addeded few custom fields in the complaint screen.
CRMT_CUSTOMER_H_WRKT is extended with the custom fields.
At the save i am trigerring the Partner Determination BAdi.
Here i have the complaint guid at run time.
I would like to check the data entered in the custom field in the complaint screen. Based on this i would like to determine one more partner.
My question is how can i get the custom field data in the complaint screen in this BAdi.
The FM: CRM_ORDER_READ is not returning this data.Is there any FM to get this ?
Thanks.
R.

Powerpivot pivottable - I can't add or drag a "value field" from the pivottable field list into the "values" section.

I built a pivottable using Powerpivot.
Initially, I can add or drag any data field I want to columns, Rows or the Values area inside the field list (those 4 squares). However, as times goes by...suddenly... I just no longer can add or drag a "value field" from the pivottable field list into the
"values" section.
Does anybody know how to fix this problem ?

Hi Bin Long,
I tried what you suggested.
I believe that there is a glitch in the Powerpivot field list (where you find the 4 squares for columns, rows, values, filter)
When I initially create a pivottable with powerpivot, everything works fine when I am adding field list items to the the columns, rows, values sections, filters.
However.....IF I close the powerpivot field list or if I save and close the excel file...then I cannot add more items to the "values" section.
I can comment about one thing that seems different in my powerpivot field list. When I can no longer add items to the "values" section, I realized that in the TOP section of the field list I see in bold letters a summary of the items that are SUM ∑ in the "values"
section.
Does anybody know how to fix this ?
Thanks.

If the connecting fields are missing the data from knvh should be u00BBnullu00AB

Could you help me I would like to have all fields from kna1 (if the connecting fields are missing the data from knvh should be »null«)in following code
select * from kna1 .
select * from knvh where kunnr = kna1-kunnr and vkorg = '0200'.
itab-mandt = kna1-mandt.
itab-stceg = kna1-stceg.
      itab-hkunnr = knvh-hkunnr.
      itab-datab = knvh-datab.
      itab-datbi = knvh-datbi.
    append itab. clear itab.
endselect.
endselect.

HI,
use the following code
select * from kna1 into table it_kna1.
if sy-subrc = 0.
select * from knvh into table it_knvh
for all entries in IT_kna1
where kunnr = it_kna1-kunnr
   and vkorg = '0200'.
if sy-subrc = 0.
loop at it_kna1 into wa_kna1.
itab-mandt = wa_kna1-mandt.
itab-stceg = wa_kna1-stceg.
loop at it_knvh into wa_knvh where kunnr = wa_kna1-kunnr.
itab-hkunnr = wa_knvh-hkunnr.
itab-datab = wa_knvh-datab.
itab-datbi = wa_knvh-datbi.
append itab.
clear itab.
endloop.
endloop.endif.
endif.
I hope this solves your problem
Regards,
Vara

#'s are coming in the place of space in the PO Print preview

Hi All ,
#'s are coming in the place of space in the PO print preview .I am creating the PO from SRM system . When I type item text manullay in SRM system # 's are coming in the place of space and When I copy & paste #'s are not coming in the po line item text . I am printing in the smartform from the field ekp0-txz01 . Could any one know how to solve the issue . Please let me know .
I have searched the post in SDN and I have asked our basis team .Finally I am posting the issue in SDN .
Original : TEST DEFECT 6667777 KK
Current : TEST#DEFECT#6667777#KK
Regards
Srihari

Hi,
is a placeholder for non printable signs such as horizontal tabs and many others.
Please check the hex content of the text in debug mode. There should be no spaces there.
Regards,
Klaus

How to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?

Hi,
how to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?
Rg,
Karthik

Hi Kamal,
This note steps will no validation that the user actually enters a value and the message will be created even if this 'required field' is left blank.
Any other way to validate the enter a value also?
Rg,
Karthik

HT1414 My i phone 4 is factory unlocked but when the sim card is entered the service provider is not shown

My i phone 4 is factory unlocked but when the sim card is entered the service provider is not shown

Hello hskod,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting encrypted backups
http://support.apple.com/kb/TS5162
You can keep trying to restore the device from backup until you remember the password. If you're having trouble, try:
Leaving the password field blank
Your Apple ID password
Your computer account password, if you have one
Email passwords you may have used
Your Wi-Fi network password
Website passwords you may have used
A password for hard-disk encryption software, if you use it
Have a nice day,
Mario

I have just requested my ipod nano 1st generation to be replaced using the scheme, i have entered the wrong postcode on the shipping of the replacement box, will it still come to my address? or how can i change it?

I have just requested my ipod nano 1st generation to be replaced using the scheme, i have entered the wrong postcode on the shipping of the replacement box, will it still come to my address? or how can i change it?

Call up apple care, (08000480408 if you are in the UK) and ask them to change the postcode and request another replacement packet

TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

Hotmail is having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

Using ms project 2007 and vba macro to list all the custom fields used in the project?

Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
of the field I select is Duration1.
I am trying to write a macro that will list all the used custom fields such as the result would look like:
Duration1 ---> "expected duration"
Text1 ---> "anything"
Flag1 ---> "....."
Number1 ---> "..............."
Can anyone provide me with the solution?
Regards,
Chuck

John,
I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
' MSP Checks all Custom Task Fields
Sub checkfields2()
'This macro will check and report out which custom task fields are used
'It requires Project 2002 and above as it relies on the GetField
'and FieldNameToFieldConstant methods which were not introduced until
'2002.
'It does not include resource fields, however it is a simple matter to
'do it by replacing the pjTask constant with pjResource.
'Copyright Jack Dahlgren, Oct. 2004
Dim mycheck As Boolean
Dim myType, usedfields As String
Dim t As Task
Dim ts As Tasks
Dim i, it As Integer
Set ts = ActiveProject.Tasks
usedfields = "Custom Fields used in this file" & vbCrLf
myType = "Text"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 30
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Number"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 20
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Duration"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Cost"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Start"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Finish"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
MsgBox usedfields
End Sub
This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
Would you mind helping me achieve this?
Thanks in advance.
Chuck

I have problems with google maps at IPhoto. It recognizes the place, but gives not the map.

I have problems with google maps at IPhoto. It recognizes the place, but gives not the map. It gets grey. You do not even see the world in black and white. What is the problem and what can I do?

in the iPhoto preferences is look up places set to automatically?
LN

The Software Protection service entered the running state.

I noticed this event fire once in minute.
I can't see tree from leaves in System Log
Log Name:      System
Source:        Service Control Manager
Date:          18.10.2012 08:44:17
Event ID:      7036
Level:         Information
Keywords:      Classic
Description:
The Software Protection service entered the running state.
Only big before that is that, I enabled BitLocker ??
Some idea ?

Hello,
Has anything been found out about this? We're running into the same issue except that it's logging every 30 seconds.
Here's some info from the machines and when it's occurring:
It only occurs when someone is connected to the machine through Remote Desktop.
The machines are Amazon EC2 instances.
Seems to only happen on machines that are connecting to RODC's.
Machines have limited connection to RODC's through security groups (machine based firewalls).
They are Windows Server 2012 instances, small and medium instance types. (See instance type details here: http://aws.amazon.com/ec2/instance-types/instance-details/)
Little or no extra software installed. These were spun up from a basic WS2012 image and it started occurring shortly after. There are other machines launched from the same image that do not have this issue.
There are also some other machines connecting to the same RODC's with the same security group (firewall) settings that are not experiencing this issue.
We are just using the standard Remote Desktop, not the 2012 Remote Desktop Services. We have tried to install this but the install always fails. See: http://social.technet.microsoft.com/Forums/windowsserver/en-US/3ab983ce-9290-49ec-81e6-a3adf34cb8b2/remote-desktop-services-failed-on-windows-2012-server-amazon-vpc-ec2
The machines (the ones having this issue as well as the ones that do not have it) all have the exact same Windows updates installed.
Here is the detail of the event:
NOTE: Every 30 seconds it logs this exact message - entered the RUNNING state. I do not see other messages stating it entered the Stopped state.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="16384">7036</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2013-08-01T12:23:10.519607800Z" />
<EventRecordID>35726</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="588" />
<Channel>System</Channel>
<Computer>REMOVED</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">Software Protection</Data>
<Data Name="param2">running</Data>
<Binary>7300700070007300760063002F0034000000</Binary>
</EventData>
</Event>
Any help or insight would be greatly appreciated...
Thanks!
Jeff

Where is the place/field to enter the website that I wish to see upon opening

Similar Messages

Maybe you are looking for