Where is the remote button located in iTunes 11 to input the 4 digit code given by the Remote App?
Under the help section for connecting the Apple Remote App for the iPhone to an iTunes library, it says to open iTunes and click on the "remote button." I have looked everywhere and cannot seem to find it. Does anyone know where it is?
I got the same issue and found that the home sharing could work in windows...
After some research........after configure the network settings of below.....It's work for me !!!
Check the Network
A general rule to fix the network problem is to restart your home network router. If the problem remains, you can try switch IP4 to IP6. To do so: Open Control Panel > Choose Network and Internet > Select the View network status and tasks under the Network and Sharing Center section > Choose your active network connection > Click the Properties button > If Internet Protocol Version 6 (TCP/IPv6) is checked, uncheck it, then click OK > Restart iTunes and check if iTunes Home Sharing will work.
Similar Messages
-
HT5654 Where is the Help button located within Itunes on a windows computer?
Where is the Help button located within Itunes on a windows computer?
It's in the top right corner of the app, like where you would see it in other apps.
You should able able to find the info your looking for here too. -
Where is the remote button located in iTunes?
Hello Community,
I updated both the Remote app and iTunes to the most recent iTunes 11. When I got to enter my Passcode to add my iTunes library it prompts me to "open iTunes on your computer and selct "yourdevice" from the Devices list. I go into iTunes but can't seem to know where to go. Where would the remote button be located?
In iTunes Help center directions are as stated:
"Pair Remote with an iTunes library
1.Tap Remote on your device’s Home screen.
2.Tap Add an iTunes Library.A 4-digit code appears.
3.Open iTunes on your computer and click the Remote button .
4.Type the 4-digit code in the iTunes window.iTunes pairs the library on your computer with the Remote app on your device."
If you can help please direct me in the easiest way possible. Thanks!Still no answer to this important question, nearly a year after it was posted? WHERE IS THE REMOTE BUTTON that we are supposed to pair Remote app on the iPhone with? Here's what the help file says in French :
Jumeler Remote avec une bibliothèque iTunes
1. Touchez Remote sur l’écran d’accueil de votre appareil.
2. Touchez Ajouter une bibliothèque iTunes.Un code à 4 chiffres apparaît.
3. Ouvrez iTunes sur votre ordinateur, puis cliquez sur le bouton Remote .
4. Tapez le code à 4 chiffres dans la fenêtre iTunes.iTunes jumelle la bibliothèque de votre ordinateur avec l’app Remote de votre appareil.
NO REMOTE BUTTON ANYWHERE IN ITUNES THAT I CAN SEE... HELP! -
Where is the file share located in itunes because i cant find it??
Where is file share located??
Still no answer to this important question, nearly a year after it was posted? WHERE IS THE REMOTE BUTTON that we are supposed to pair Remote app on the iPhone with? Here's what the help file says in French :
Jumeler Remote avec une bibliothèque iTunes
1. Touchez Remote sur l’écran d’accueil de votre appareil.
2. Touchez Ajouter une bibliothèque iTunes.Un code à 4 chiffres apparaît.
3. Ouvrez iTunes sur votre ordinateur, puis cliquez sur le bouton Remote .
4. Tapez le code à 4 chiffres dans la fenêtre iTunes.iTunes jumelle la bibliothèque de votre ordinateur avec l’app Remote de votre appareil.
NO REMOTE BUTTON ANYWHERE IN ITUNES THAT I CAN SEE... HELP! -
HT1420 Where is the "Store Menu" located in iTunes? I cannot find "Authorize This Computer"...
Where is the "Store Menu" located in iTunes? I cannot find "Authorize This Computer"...
-
Where is the home button located so i can use siri?
WHere is the home button located so i can use siri?
The Home button is the round button on the front of your iPad.
Which iPad do you have? Siri is only available on the new iPad with iOS 6. The original iPad and the iPad 2 do not support Siri. -
HT201304 Where the heck is the 'agree' button on new iTunes conditions e-mail
Where the heck is the 'agree' button on new iTunes conditions e-mail ?
I was certain that that couldn't be the problem because I could play music from my daughter's computer and she could play stuff from mine, so I was positive that home sharing was all set. When I went through that article, however, I found that I had missed a step. It's weird that you can access a family member's computer even though home sharing isn't set up entirely!
In any case, thank you very much for your time. I'm embarrassed that the answer was out there, googleable, and even a page that I had looked at already, but you were incredibly gracious anyway. Good karma to you, sberman! -
If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE -
I can't find the "Repeat" button in my Itunes.
I can't find the "Repeat" button in my Itunes, when I'm listenning to a music. I have reinstaled my Itunes, it didn't help.
You can access the repeat options if you right-click on the shuffle icon, or if menus are enabled you can use
Controls > Repeat > Off | All | One.
Once the control is visible you can click it to switch between states as before. If the control is turned to off it disappears on the next track change. In contrast the shuffle control remains visible whenever it is appropriate. Hopefully the next release will fix this.
tt2 -
my phone was showing the apple pic when i eraseed all content and settings so i did Pressed both home and sleep/wake buttons until the Apple logo appeared, then released the sleep/wake button and continued pressing the home button alone until iTunes detected the phone in Recovery Mode but an error is coming (1015) plz help me!!!!
plug into itunes and take it from there
http://support.apple.com/kb/HT1808 -
Hi,
I am trying to install 'Playonmac' so I can install Meta Trader 4 - however each time I reach the next button in order to install XQuartz it hits a dead end
- the 'Installing Quartz' window is saying installing Quartz, but all it does from there is the clock the spins around, just keeps spinning and nothing happens - I have waited and waited for it, but it just kind of freezes there. I have reloaded the software over and over, and even switched off the firewall in case it was blocking Playonmac. It is really important I load Meta Trader 4 on my Mac.
Help will be much appreciated - Has anyone had this sort of problem? Does anyone know how to resolve it?
Regards
JoeAccording to wiki "the documentation from Apple states that Windows XP Service Pack 2 or Windows Vista is requisite for a Boot Camp installation, and it also mentions that trying to install an unsupported operating system could prevent the computer from booting even into Mac OS X". Sure that was from wiki, but it does seem to support and somewhat validate the problem I had with installing an earlier edition of XP.
http://en.wikipedia.org/wiki/BootCamp_%28software%29#Other_operatingsystems
Thanks for the info on the Filesystem info. My problem is that installing OS X on a mac is just a little bit more technical than installing Windows on a PC as there are a few more things to consider. Plus I'm not familiar with any of the utility programs as well. It's a **** miracle I managed to somehow create a volume to install OS X on when I thought I was erasing the partition I created for WinXP.
But I'm still not sure about the missing 40GB from my 500GB HDD. Upon coming to the desktop straight after OS X was fully re-installed I noticed that the HDD only had 460GB and that 440GB of it available space. So the full installation of OS X was 20GB, but where has the other 40GB gone? I swear I saw that I had much more available space on my harddrive (BEFORE I tried to partition my HDD under Boot Camp Assistant and stuffing up the computer). Is the missing 40GB from the ORIGINAL FACTORY INSTALL of OS X INCLUDING all my iTunes music and other files I uploaded to the computer earlier? It would make sense but there's no way, as far as I know, of checking this. Any ideas?
Cheers. -
My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo. -
After installing 8.2 on my iPad (2nd gen) all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using. I swipe it away and start over, only to have the same thing happen again. I have reinstalled all the apps, rebooted, synced and re-synced with iTunes. This is VERY irritating!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control key.
Scratch the post above - the musics that plays in the playlist also plays in the library and that is because i forgot that i imported from the cd yesterday. Basically, I see the rest of my music, but it doesnt' play and tells me it can't locate the file though the location in 'perferences' points to the correct location. Getting iTunes to play after a new computer or rebuild is a headache.
-
I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?
I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!
Maybe you are looking for
-
Report in HTML web service... unnecessarity tags added
My requirement is to generate a report in html format in sap and get it through a web service. I need to invoke a sap web service which executes a report function and returns the report in HTML format. I am using an RFC BAPI which uses WWW_HTML_FROM
-
REPORT OUTPUT to Internal table
Hi, I order to achieve my requirement i need to know if this can happen: Q: I want to write a report REP1 (which has ITAB1) in which I want to run an already existing report REP2 and direct the result of the REP2 to ITAB1. So that upon this ITAB1 con
-
I am in the final stage of deciding whether to move from Windows 7 (and MS Office) to an iMac on Mavericks. I currently produce mailing labels in MS Word (using an app to fit particular styles of Avery labels) using Mail Merge with its data from my
-
After loading Lion I cannot open open some pictures in Aperture. I get Unsupported Image Format, all files even the ones I can open are .JPG. Also it tells me picture was made using Canon EOS Rebel with unknown lens.
-
Block Operation Number Change in Production order
hello, How can i block the operation number change in production order if the operation status is CNF...? ie either disable the operation number cell or disable the entire row in the production order. rgrds Krishna.