Where the HELL is the shift key on the Nokia C5 00
Please, please can someone help me.
I'm trying to get Best Screen Snapt to work but I can't set up a shortcut key because I can't find the shift on the C5. Please can someone get me some advice?
Thanks
Nikki
Are you referring to this C5? http://www.gsmarena.com/nokia_c5-3122.php If you are, there is no shift key on it. What you do is go to the options menu of best screen snap and change the key needed to use it. For example on my 5800, I set best screen snap to use the camera key. I just turn the app off whenever I dont need to make screenshots.
If you find my post helpful please click the green star on the left under the avatar. Thanks.
Similar Messages
-
Any way to verify where the Nokia set is Made?
I have bought this set. This is a new set. Made in Finland. The thing I want to know is there any way I can know that this set is originally made in finland or not. I mean is there any type of way to verify. It is written in the back that "Made in Finland but is there any other way to verify by using the IMEI number or anything else?
My question:
Is there any way to know by using the IMEI number oir anything else without the label in the set and the box to verify where the Nokia set is made?
I preferred to buy the "Made in Finland" without "Made by Nokia". I bought "Made in Finland"
My set is:
Nokia N70 Music Edition
*****Moderator Note*****
Edited out IMEI
Message Edited by linwood on 01-Jul-2008 12:35 PM
Solved!
Go to Solution.Nokia has production facilities in a number of countries manufacturing phones to the same high standards, provided that you take care to buy a genuine Nokia device from a reputable source, the country in which the device was made should make no difference whatsoever.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button. -
Can't find where the Nokia Connectivity Cable Driv...
Hi. Just as the topic says, I can't find where the NCCD is installed on my pc. I tried searching for it but all I find is the setup. Can anyone help me find it? I'll be very grateful. Thanks in advance.
When people have two item and they feel it is a troublesome thing that when they have to put the function of the two items together, what should they do? Of course they can look for item that at the same time owns two kinds of the function that people requires. Maybe this is not easy to understand, and you can take one thing as an example. For example, in the past the size of the umbrella is a little huge and sometimes it is not easy to carry and can’t be used to protect people from the hot sunshine in the summer. Then the folding sun umbrella and folding umbrella come into the market and now is widely used by people. And this rule also goes when you want to buy the WiFi & Bluetooth Signal Jammer that own the ability of both jamming the cell phone and the GPS signals.
-
i cannot type a capital i using the left shift key. also keyboard now putting the cursor in a different place than where i type while i am typing. Checked speech keys, all fine. Batteries fine. Also used the keyboard check program on the imac, shows key ok.
wireless mouse will suddenly scroll down horizontally and won't stop. when i am on a webpage it will bounce back to the previous page without my doing so. i have tried adjusting the mouse several times, turning it on and off, and now am using my wacom mouse which also seems to have issues with this computer. i have only had this a few months and getting very frustrated.Can you try a different keyboard to see if the problem persists? Also, you have 90 days of phone support when you buy a mew mac.
-
I'm having some difficulty with transferring images from a UDP Client to a UDP Server. The issue is receiving the bytes necessary to update an original image sent from the Client to the Server and updating the Servers List(Of Byte) with the
new bytes replacing bytes in that list. This is a simplex connection where the Sever receives and the Client sends to utilize the least amount of bandwidth for a "Remote Desktop" style application where the Server side needs image updates of whatever
occurs on the Client desktop.
So far I can tranfer images with no issue. The images can be be any image type (.Bmp, .Gif, .JPeg, .Png, etc). I was working with sending .JPeg's as they appear to be the smallest size image when a Bitmap is saved to a memory stream as type
.JPeg. And then I am using GZip to compress that byte array again so it is much smaller. However on a loopback on my NIC the speed for sending a full size screen capture is not very fast as the Server updates fairly slowly unless the Clients screen capture
Bitmap is reduced in size to about 1/3'd of the original size. Then about 12000 bytes or less are sent for each update.
Due to .JPeg compression I suppose there is no way to get the difference in bytes between two .JPegs and only send those when something occurs on the desktop that alters the desktop screen capture image. Therefore I went to using .Bmp's as each
.Bmp contains the same number of bytes in its array regardless of the image alterations on the desktop. So I suppose the difference in bytes from a second screen capture and an inital screen capture are what is different in the second image from the initial
image.
What I have done so far is save an initial Bitmap of a screen capture using a memory stream and saving as type .Bmp which takes less than 93 milliseconds for 4196406 bytes. Compressing that takes less than 118 milliseconds to 197325 bytes for
the current windows on the desktop. When that is done PictureBox1 is updated from nothing to the captured image as the PictureBox's background image with image layout zoom and the PictureBox sized at 1/2 my screens width and 1/2 my screens height.
Then I save a new Bitmap the same way which now contains different image information as the PictureBox is now displaying an image so its back color is no longer displayed (solid color Aqua) and the cursor has moved to a different location. The
second Bitmap is also 4196406 in bytes and compressed it was 315473 bytes in size.
I also just found code from this link Converting a Bitmap to a Byte Array (and Byte Array to Bitmap) which gets a byte array
directly from a Bitmap and the size of that is 3148800 for whatever is full screen captured on my laptop. So I should be able to work with smaller byte arrays at some point.
The issue I'm having is that once the Client sends an image of the desktop to the Server I only want to update the server with any differences occuring on the Clients desktop. So what I have done is compare the first screen captures bytes (stored
in a List(Of Byte)) to the second screen captures bytes (stored in a List(Of Byte)) by using a For/Next for 0 to 4196405 where if a byte in the first screen captures List is not equal to a byte in the second screen captures List I add the index and byte of
the second screen captures list to a Dictionary(Of Integer, Byte). The Dictionary then only contains the indexes and bytes that are different between the first screen capture and second screen capture. This takes about 125 milliseconds which I think is pretty
fast for 4196406 byte comparison using a For/Next and adding all the different bytes and indexes for each byte to a Dictionary.
The difference in Bytes between the inital screen capture and the second screen capture is 242587 as an example which changes of course. For that amount of bytes the Dictionary contains 242587 integers as indexes and 242587 bytes as different
bytes totaling 485174 bytes for both arrays (keys, values). Compressed the indexes go from 242587 to 43489 bytes and the values go from 242587 to 34982 bytes. Which means I will have to send 78, 481 bytes from the Client to the Server to update the display
on the server. Quite smaller than the original 4196406 bytes of the second Bitmap saved to type .Bmp or the compressed size of that array which was 315473 bytes. Plus a few bytes I add as overhead so the server knows when an image array ends and how many packets
were sent for the array so it can discard complete arrays if necessary since UDP is lossfull although probably not so much in current networks like it may originally have been when the internet started.
In reality the data from the Client to the Server will mostly be the cursor as it moves and updating the Server image with only a few hundred bytes I would imagine at a time. Or when the cursor selects a Button for example and the Buttons
color changes causing those differences in the original screen capture.
But the problem is if I send the Dictionaries Indexes and Bytes to the Server then I need to update the original Bitmap List(Of Byte) on the server by removing the Bytes in the received informations Index locations array from the Servers Bitmap
List(Of Byte) and replacing those Bytes with the Bytes in the received informations Byte array. This takes so long using a For/Next for however many indexes are in the received informations Index array to update the Bitmap List(Of Byte) on the server using
"Bmp1Bytes.RemoveAt(Index As Integer)" followed by "Bmp1Bytes.Insert(Index As Integer, Item As Byte)" in the For/Next.
I've tried various For/Next statements including using a new List(Of Byte) with If statements so If the the integer for the For/Next ='s the Key in a Dictionary(Of Integer, Byte) using a Counter to provide the Dictionaries Key value then
the Dictionaries byte value will be added to the List(Of Byte) and the counter will increas by one Else the List(Of Byte) adds the original "Bmp1Bytes" byte at that index to the new List(Of Byte). This takes forever also.
I also tried the same For/Next adding to a new Dictionary(Of Integer, Byte) but that takes forever too.
I think I could use RemoveRange and AddRange to speed things up. But I don't know how to retrieve a contiguous range of indexes in the received indexes that need to be updated in the servers "Bmp1Bytes" List(Of Byte) from the received
array of indexes and bytes which are in a Dictionary(Of Integer, Byte). But I believe this would even be slower than some realistic method for replacing all Bytes in a List(Of Byte) when I have the indexes that need to be replaced and the bytes to replace
them with.
Even if I just used AddRange on a new List(Of Byte) to add ranges of bytes from the original "Bmp1Bytes" and the changes from the Dictionary(Of Integer, Byte) I think this would be rather slow. Although I don't know how to do that
by getting contiguous ranges of indexes from the Dictionaries keys.
So I was wondering if there is some method perhaps using Linq or IEnumerable which I've been unable to figure anything out which could do this.
I do have some copy and pasted code which I don't understand how it works that I am using which I would guess could be altered for doing something like this but I can't find information that provides how the code works. Or even if I did
maybe I can't understand it. Like the code below which is extremely fast.
Dim strArray() As String = Array.ConvertAll(Of Integer, String)(BmpComparisonDict.Keys.ToArray, Function(x) x.ToString())
La vida locaMonkeyboy,
That was quite a bit to read, but still a bit unclear. Could you put a specific list of goals/questions, asked in the smallest possible form?
It seems like either you're making a program that monitors activity on your computer, or you're writing some kind of remote pc app.
When you do get your bytes from using lockbits, keep in mind all the files header info would be lost. I think retaining the header info is worth the extra bytes.
The other, thing: I'm not sure if you're taking 32bpp screen shots, but also keep in mind that the "whole desktop" is the final destination for blended graphics, if that makes sense. What I mean is that there is no need to capture an "alpha"
channel for a desktop screenshot, as alpha would always be 255, this could save you 1 byte per pixel captured... Theres nothing "behind" the desktop, therefore no alpha, and every window shown above the desktop is already blended. I suggest using
24Bpp for a full screen capture.
Your X,Y information for the mouse could be stored as UINT16, this would save you a measly 2 bytes per location update/save.
When you update your byte arrays, maybe you can turn the array into a stream and write to whatever index, however many bytes, that should prevent a "Shift" of bytes, and instead overwrite any bytes that "get in the way".
ex
Dim example As String = "This is an example."
Dim insertString As String = "was"
Dim insertBytes As Byte() = System.Text.Encoding.ASCII.GetBytes(insertString)
Dim bytes As Byte() = System.Text.Encoding.ASCII.GetBytes(example)
Dim modifiedBytes As Byte() = {}
Using ms As New System.IO.MemoryStream(bytes)
ms.Position = 5
ms.Write(insertBytes, 0, 3)
modifiedBytes = ms.ToArray
End Using
Dim newString As String = System.Text.Encoding.ASCII.GetString(modifiedBytes)
'Notice how below there isn't the word "is" anymore, and that there isn't a
'space.
'This demonstrates that you overwrite existing data, versus shifting everything to
'the right.
'Returns: This wasan example.
MsgBox(newString)
“If you want something you've never had, you need to do something you've never done.”
Don't forget to mark
helpful posts and answers
! Answer an interesting question? Write a
new article
about it! My Articles
*This post does not reflect the opinion of Microsoft, or its employees.
Well it's too much to read. I was really tired when I wrote it. Even the below is too much to read but perhaps gets the point across of what I would like to do which I think
Joel Engineer may have answered but I'm not sure. As I'm still too tired to understand that yet and research what he said in order to figure it out yet.
But maybe the code below can provide the concept of the operation with the comments in it. But seeing as how I'm still tired it may be confused.
Option Strict On
Imports System.Windows.Forms
Imports System.IO
Imports System.IO.Compression
Imports System.Drawing.Imaging
Imports System.Runtime.InteropServices
Public Class Form1
Dim Bmp1Bytes As New List(Of Byte)
Dim Bmp1BytesCompressed As New List(Of Byte)
Dim Bmp2Bytes As New List(Of Byte)
Dim BmpComparisonDict As New Dictionary(Of Integer, Byte)
Dim BmpDifferenceIndexesCompressed As New List(Of Byte)
Dim BmpDifferenceBytesCompressed As New List(Of Byte)
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
SomeSub()
End Sub
Private Sub SomeSub()
' Pretend this code is in UDP Client app. A screen capture is performed of the desktop. Takes about 90 milliseconds.
Bmp1Bytes.Clear()
Using BMP1 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP1)
g1.CopyFromScreen(0, 0, 0, 0, BMP1.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP1.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp1Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
Bmp1BytesCompressed.AddRange(Compress(Bmp1Bytes.ToArray))
' UDP Client app sends Bmp1BytesCompressed.ToArray to UDP Server which is the entire image of the desktop that the UDP
' Client is on. This image takes awhile to send since compressed it is about 177000 bytes from over 4000000 bytes.
' I will be using different code just to get the bytes from the actual Bitmap in the future. That is not important for now.
' Pretend the UDP Server has received the bytes, decompressed the array received into a List(Of Byte) and is displaying
' the image of the UDP Clients desktop in a PictureBox.
' Now the image on the UDP Clients desktop changes due to the mouse cursor moving as an example. Therefore a new Bitmap
' is created from a screen capture. This takes about 90 milliseconds.
Bmp2Bytes.Clear()
Using BMP2 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP2)
g1.CopyFromScreen(0, 0, 0, 0, BMP2.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP2.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp2Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
' Now I have the original images bytes in Bmp1Bytes and the new images bytes in Bmp2Bytes on the UDP Client. But I don't
' want to send all of the bytes in Bmp2Bytes to the UDP Server. Just the indexes of and the bytes that are different in
' Bmp2Bytes from Bmp1Bytes.
' This takes less than 100 milliseconds for what I've tested so far where over 500000 bytes in Bmp2Bytes are different
' than the bytes in Bmp1Bytes. Usually that amount would be much less. But during testing I was displaying the image
' from Bmp1 bytes in a PictureBox so a large amount of data would change between the first screen shot, the PictureBox
' then displaying an image on the same PC and then the second screen shot.
BmpComparisonDict.Clear()
For i = 0 To Bmp1Bytes.Count - 1
If Bmp1Bytes(i) <> Bmp2Bytes(i) Then
BmpComparisonDict.Add(i, Bmp2Bytes(i))
End If
Next
' So now I have all the difference bytes and their indexes from Bmp2Bytes in the BmpComparisonDict. So I compress
' the indexes into on List and the Bytes into another List.
BmpDifferenceIndexesCompressed.Clear()
BmpDifferenceBytesCompressed.Clear()
BmpDifferenceIndexesCompressed.AddRange(Compress(BmpComparisonDict.Keys.SelectMany(Function(d) BitConverter.GetBytes(d)).ToArray()))
BmpDifferenceBytesCompressed.AddRange(Compress(BmpComparisonDict.Values.ToArray))
' Now pretend the UDP Client has sent both those arrays to the UDP Server which has added both decompressed arrays
' to a Dictionary(Of Integer, Byte). And the server has the original image decompressed bytes received in a List
' called Bmp1Bytes also.
' This is where I am stuck. The UDP Server has the Dictionary. That part was fast. However there is no
' fast method I have found for creating a new List(Of Byte) where bytes in the originally received List(Of Byte) that
' do not have to be altered are placed into a new List(Of Byte) except for the indexes listed in the
' Dictionary(Of Integer, Byte) that need to be placed into the appropriate index locations of the new List(Of Byte).
' The below example for doing so is exceptionally slow. Pretend UpdateDictionary has all of the decompressed indexes
' and bytes received by the UDP Server for the update contained within it.
Dim UpdateDictionary As New Dictionary(Of Integer, Byte)
Dim UpdatedBytes As New List(Of Byte)
Dim Counter As Integer = 0
For i = 0 To Bmp1Bytes.Count - 1
If i = UpdateDictionary.Keys(Counter) Then ' Provides the index contained in the Keys for the Dictionary
UpdatedBytes.Add(UpdateDictionary.Values(Counter))
Counter += 1
If Counter > UpdateDictionary.Count - 1 Then Counter = 0
Else
UpdatedBytes.Add(Bmp1Bytes(i))
End If
Next
' So what I'm trying to do is find an extremely fast method for performing something similar to what the
' above operation performs.
End Sub
Private Function Compress(BytesToCompress() As Byte) As List(Of Byte)
Dim BytesCompressed As New List(Of Byte)
Using compressedStream = New MemoryStream()
Using zipStream = New GZipStream(compressedStream, CompressionMode.Compress)
zipStream.Write(BytesToCompress, 0, BytesToCompress.Count)
zipStream.Close()
BytesCompressed.AddRange(compressedStream.ToArray)
End Using
End Using
Return BytesCompressed
End Function
Private Function Decompress(BytesToDecompress() As Byte) As List(Of Byte)
Dim BytesDecompressed As New List(Of Byte)
Using DecompressedStream = New MemoryStream()
Using zipStream = New GZipStream(DecompressedStream, CompressionMode.Decompress)
zipStream.Write(BytesToDecompress, 0, BytesToDecompress.Count)
zipStream.Close()
BytesDecompressed.AddRange(DecompressedStream.ToArray)
End Using
End Using
Return BytesDecompressed
End Function
End Class
La vida loca -
My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future. -
Can't get my MacBook Pro to start up. Have shut it down several times and tried restarting but all I get is a grey screen with the spinning icon. Apple Support online suggested starting with power button followed immediately with the shift key. Same results. Also tried power button with shift key, command, and V. Black screen appeared instead with lots of data language but still no starting. This final page was suppose to result in an internal system check and restart but nothing happened and the black screen remains.Where do I go from here? Scheduled for the Genius Bar tomorrow but would like to resolve this beforehand.
You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
Clinton -
How can I reduce the size of a photo PROPORTIONALLY? With my old Macmini I was able to place the pointer on the bottom right corner of the picture, hold down the shift key and move the pointer to achieve the desired size.
You'll need to use a 3rd party editor like one of these:
Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
Portraits and Prints - Free
GIMP for Mac - Free
Xee 2.1 - free
My personal preference would be for Photoshop Elements for Mac. Most of these will let you select and copy a head from one photo, paste it into another photo, resize and place where you need it.
PSE has a specific feature just for that function. I belive the Adobe site for PSE has a demo video of that feature.
OT -
I was entering a website a wanted to visit which required an underscore,
but instead of pressing the shift key along with the ' underscore ' key (-_), I pressed the ctrl key and my firefox homepage shrunk to where the print was unreadable. How do I bring the homepage back to where it should be?Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
See:
* http://kb.mozillazine.org/Zoom_text_of_web_pages -
How do I fix my left shift key? Any open windows leave and make the desktop visible.
How do I fix my left shift key? Any open windows leave and make the desktop visible. I have tired to go into system preferences and reset all of the keyboard settings to default but the issue hasn't gone away.
You are not running as administrator, I think, which may be required and the only way to properly work and register. Also check for compatibility mode settings, UAC and DEP, all of which may require to be adjusted for a legacy app like PS CS2 to run properly. Also turn off Aero and switch to a conventional visual theme. The brush issue may be related to that or is a more generic problem with your graphics card and mouse config, but since you didn't provide any info on that, it will be hard for anyone to advise.
Mylenium -
Ive had an iPad for a year or so, it's got tons of music on it. I recently got myself an iPhone. I read on here about how to set up a completely separate library using my same account (as my iphone couldn't possibly hold the same amount as my pad I thought it made sense!). Trouble is....as I set up a new library it asked me to name it, which I did. The trouble is now, every time I log in to iTunes it logs into the new library which is completely blank. It has of course not effected my music on my pad (phew!), I cannot find my original iTunes a/c anywhere on my pc. In desperation I tried to uninstall the iTunes off my pc, then reinstall, and log into my original a/c hoping all would be revealed thanks to the iCloud, but no.....it's blank! Is there anyway of copying (safely) all of my music and films FROM my iPad ONTO my new blank iTunes account?? Any help would be greatly appreciated!!
The trouble is now, every time I log in to iTunes it logs into the new library which is completely blank. It has of course not effected my music on my pad (phew!), I cannot find my original iTunes a/c anywhere on my pc.
Okay, try launching iTunes while holding down the shift key (again) but this time, click "Choose library". Browse to the location of the old library file. The default locations of the library file are inside the iTunes folder described in the following table:
Operating System
Default location of iTunes Folder
Mac OS X
/Users/[your username]/Music
Microsoft Windows XP
\Documents and Settings\[your username]\My Documents\My Music\
Microsoft Windows Vista
\Users\[your username]\Music\
Microsoft Windows 7
\Users\[your username]\My Music\
Find and open the library file. Are you seeing your normal library now? -
I am unable to upload more than one photo. I have tried to hold down the shift key and highlighting the remaining photos.
If you are using the Internet Explorer (IE) browser than you will only be able to upload one file at a time. This is per browser design by Microsoft. If you want to upload multiple files than use another browser such as Firefox or Chrome.
If you are not using IE and are seeing this issue then please share which OS version and browser version you are using. -
Shift key on the macbook pro 15 inch retina is unresponsive
I bought the macbook pro 15 inch retina just over a week ago and i'm definitely regretting it because the shift key is really unresponsive; what does this mean? I also want to know how to extend the track time on garage band. Anyone know how to? It's really bugging me because I need to type effencianly for a £2000 pound laptop it should be perfect to be honest.
I have the 2.5 ghz, 16 gb of ram and 512 gb flash storage.
The battery only runs out just browsing the web and it heats up very fast by only watching youtube...MEMORY
Built-in Memory 8 or 16 GB PC3-12800 (1600 MHz) DDR3L on-board memory
Maximum Memory 16 GB
Memory Slots None
Interleaving Support Yes
DISPLAY
Built-in Display 15.4-inch (diagonal) LED-backlit display with IPS technology at 220 pixels per inch
Resolutions 2880 by 1800 pixels (Retina); scaled resolutions: 1920 by 1200, 1680 by 1050, 1280 by 800, and 1024 by 640 pixels
GRAPHICS
Graphics Card NVIDIA GeForce GT 650M and Intel HD Graphics 4000
Graphics Memory 1 GB GDDR5 (GeForce GT) 512 MB DDR3 (HD Graphics) shared with main memory
Display Connection 1 - HDMI port or Thunderbolt digital video output (Supports an HDMI-compatible device while using one Thunderbolt display or support for two Thunderbolt displays)
Display Modes Dual display extended, video mirroring, and AirPlay Mirroring
External Resolution Up to 2560 by 1600 pixels on up to two external displays
Camera 720p FaceTime HD camera
Use this to access all the resolutions
http://www.madrau.com/indexSRX4.html -
have just shifted to India where the voltage is 220V vs 110V used in US. will the apple tv work directly or do i need a step down convertor to use it?- tks sahil
You only need a plug adaptor as long as the voltage is between 100 and 240 volts.
(123957) -
I just got an Ipod Classic recently and downloaded Itunes. Got my music on my Ipod. My husband just got an Ipod Touch. I followed the directions on how to create a 2nd library and was able to load his music onto his Ipod. My problem is now I can not find my original library. I did what the directions said about holding down the shift key while opening Itunes and it still goes to the 2nd library that I created. How do i get my original library to come up? I tried several times with the same results. Please let me know what I need to do to be able to get into either library. Thank You.
Does the original library file still exist on the computer? Hopefully when creating the new library it was done in a seperate folder as I do not believe iTunes allows for two library files in the same location.
Maybe you are looking for
-
I have managed to sync a ringtone to my ne i phone 5C but the volume is way too soft. The sound is great on my computer but hard to hear at all on the phone. I have tried turning up the volume button on the phone but it doesn' do anything for the ri
-
I need help getting my local testing server to work - PHP/MySQL
Hello, I am using DW CS5 and have installed XAMPP for my Server/PHP/DB package (which is the same as my live site). I have gone thru every tuitorial and all information on this subject, and unfortunately I can't get the server set up correct. Other t
-
I have an Ipod 5th gen, I added a keyboard which was greek, I had changed my password to a greek short sentence. But the decided to take the greek keyboard off as I didn't use it often, so there was no point in having it. But I forgot to change my pa
-
How do I change my email addy to authorize my ereader in Adobe Digital Editions?
I moved and don't have access to my old email account. So when they tell me to read the email they sent me, I can't.
-
How can a table cell span more than one page?
I need to configure a table of text that permits a single cell containing a large quantity of text to automatically span several pages. This works easily in WORD but not (apparently) in PAGES. I have used the Inspector to check that the table is conf