Where to apply input verifier using netbeans IDE editor

hello frenz,
could anyone guide me on how to applying input verifier using netbeans IDE editor?

You should ask your problem in the netbeans forum or just set the input verifier manually.

Similar Messages

How do I add a TableModelListener using NetBeans IDE 6.0

I added a JTable using the IDE but I need to be able to detect when someone has changed the value in a cell.
From reading I found that I need a TableListener and can use TableChanged and GetValueAt but I can not determine how or where I am suppossed to add that code.
It seems like it should be in the Guarded block because that is the only part of my code where my JTable is in scope.
I tried adding a TableModelListener in the section of code that I can edit...right above main and the section where the IDE adds lines like these....
private void jButton5ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
private void jButton6ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
So long story short I still can not determine how to add a Listener to my table.
Is it something I have to edit myself or can the IDE add it? I can only see Mouse and Key Listeners that I can add in the IDE.

Hi,
Sorry I don't have a ready answer to your question, which by now you have probably resolved already. One reason you did not receive a timely reply is that this is a Java Studio Enterprise (JSE) forum, and not a NetBeans forum. Although these are two different products, many of the Enterprise features of JSE can be found in the current NetBeans 6.0 product.
The general place to ask NetBeans questions is at [email protected]
Regards,
-Brad Mayer

How to build jms files using netbeans ide

hi,
i am using the latest netbeans ide to build a simple jms java file,
but i am getting this:
init:
deps-jar:
Compiling 10 source files to
C:\wrox\pro_jms\Chapter04\Test\build\classes
C:\wrox\pro_jms\Chapter04\AccountsDepartment.java:4: package
javax.jms does not exist
import javax.jms.*;
C:\wrox\pro_jms\Chapter04\AccountsDepartment.java:11: cannot find
symbol
the netbeans ide i am using is jdk_1.6, which when i use directly to
compile in command line mode, works. can anyone tell me why this is
happening?
thanks.

I take it that you are trying to build a Java applicaiton that uses JMS API. To do it in netbeans using SUN OpenMQ I usually follow those steps:
1) I create a new project
2) I add JMS library. This is a library that I had created in netbeans using Library Manager. It consist of jms.jar ( this jar file contains the definition of JMS API). Next jar file is the implemention of the JMS API, in case of SUN OpenMQ it's imq.jar, but if you're using a different JMS provider it may be a different file. The last jar file in my JMS library is usually fscontext.jar, this jar file provides JNDI access to a file based store. Again if you're using something like ldap then it would be a different jar file.
That's basicly it - Tom

How to develop complib using NetBeans IDE?

Anyone has done this? I don't know which project type I should use.
Thanks.

Hi,
Please post the query at the netbeans site.
Thanks
Cheers
Giri

Preverification Error while using kXML with Netbeans IDE

Hello All,
I am using Netbeans IDE for wrting a program that parses a xml using
kXML and display some results on screen.
The Netbeans IDE gives the various obfuscation levels.
The code is properly compiled at any level less than the
highest obfuscation level. If I compile it at HIGH obfuscation level then it gives the following error-----
Error preverifying class e
VERIFIER ERROR e.a(Ll;)Lorg/kxml/kdom/Element;:
Cannot find class org/kxml/kdom/Element
D:\Netbeans_Workspace\TestObfuscation\nbproject\build-impl.xml:269: Preverification failed with error code 1.
BUILD FAILED (total time: 4 seconds)
How can we obfuscate the program using highest level of obfuscation.
Thanks
Vikas

Thanks Peace,
But I am facing the same problem even when I use the source java files of kXML and include those in my project and use them as additional classes to my class.
It again builds properly when I don't use the highest obfuscation level.
But if I try to obfuscate using Level HIGH it throws the same error.
However when I try to run this project from J2ME Wireless Toolkit, it is running fine on the emulator.
I guess the error is something specific to Netbeans IDE. Have anyone of you encountered such a bizzare error.
Thanks,
Vikas

Point Database tutorial but using Derby Database in NetBeans IDE

Hi
I am getting an error when I am trying to run the EJB Entity beans BMP example "savingsaccount" in the examples folder of j2eetutorials .
I have using NEtBeans IDE + Sun APP server and the following the tutorial Netbeans + J2ee tutorials...
THe problem is the tutorial talks about a "pointdatabase" 8.1 verson and the Sun App Server I have is 8.2 which has "Derby Database".
However I made the necessary changes in the code. Siill the error is someting like this :
"ar 27, 2006 3:40:57 AM com.sun.corba.ee.spi.logging.LogWrapperBase doLog
INFO: "IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/1366"
Exception is caught: RemoteException occurred in server thread; nested exception is:
java.rmi.RemoteException: ejbCreate: Invalid argument: parameter index 1 is out of range.
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.RemoteException: ejbCreate: Invalid argument: parameter index 1 is out of range.
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:161)
at javax.rmi.CORBA.Util.mapSystemException(Util.java:67)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:142)
at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(Unknown Source)
at bank._SavingsAccountRemoteHome_DynamicStub.create(_SavingsAccountRemoteHome_DynamicStub.java)
at savingsaccountclient.Main.main(Main.java:64)
Caused by: java.rmi.RemoteException: ejbCreate: Invalid argument: parameter index 1 is out of range.
....and more...
So I am not sure whether this is some fault of the application or the database access errior...?
Someone who tried this let me know plz...
thanks
deepesh

Microsoft SQL Driver 2005 JDBC Driver is not the Derby driver.
You need the correct JDBC driver for the database you are using, you can't simply grab the first one you find.

Runtime Error using JDBC Driver in NetBeans IDE 6.9.1

Hello,
I receive a compiler error which reads as follows;
java.lang.ClassNotFoundException: org.apache.derby.jdbc.EmbeddedDriver
java.sql.SQLSyntaxErrorException: Schema 'DEMO' does not exist
Heres the main body of code i am trying to execute.
public class Main {
@param args the command line arguments
public static void main(String[] args) {
// TODO code application logic here
try{
Class.forName("org.apache.derby.jdbc.EmbeddedDriver");
}catch(ClassNotFoundException e){
System.out.println(e);
try{
Connection con = DriverManager.getConnection("jdbc:derby://localhost:1527/SimpleDBDemo", "demo", "demo");
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT * FROM DEMO.Table1");
while (rs.next()) {
String s = rs.getString("Name");
float n = rs.getFloat("Age");
System.out.println(s " " n);
}catch(SQLException e){
System.err.println(e);
I am using NetBeans IDE and have created a database under: Services->Databases-> Java DB->SimpleDBDemo.
I have a database connection in which theres a simple table (called "TABLE1") created which contains the names and ages of two people. I am trying to access the data of these two people.
From what i can figure out i am getting a runtime error. I have downloaded a folder called "Microsoft SQL Driver 2005 JDBC Driver" which contains the "sqljdbc.jar" executable file. I copied the jar file to the library in "Program files->Sun->javadb" and then added the file to the project libraries section i.e. "Project->properties->add JAR/Folder->sqljdbc.jar" in netbeans.
I am still getting the same runtime error. Have i the sqljdbc.jar file added in the wrong place?
Any help would be greatly appreciated.

Microsoft SQL Driver 2005 JDBC Driver is not the Derby driver.
You need the correct JDBC driver for the database you are using, you can't simply grab the first one you find.

NetBeans IDE 4.1 & a class file

Hello, I use NetBeans IDE 4.1 to write my java programs. I've been assigned to write a program that will prompt the user for an input. To make this easier, my University has written a file called "In.java" so we can easily get any type of input from the user. For example if we want the user to enter his/her name, we would write:
System.out.println ("Please enter your name: ");
String name = In.getString(); //allows user to enter a string
The "In.java" file is supposed to be kept and compiled in the directory I'm working in. I kept it in C:\j2sdk1.4.2_09 and it works fine when I write a program in notepad but not NetBeans IDE. It does not recognize the "In.class" file. Any way to get around this? Thanks in advance.

NetBeans 4.1 is bundled with J2sdk1.5.0_04. Check your NetBeans classpath and see if it is pointing to the newer sdk.
If so, it needs to be changed to point to your older SDK...
... or, get your In.class file into the current NetBeans classpath...
... or read up on, and use the new Scanner class in the new sdk.

Tutorial using Netbeans 6.7.1and JMX - Tutorial Outdated or Broken

Good afternoon:
I am working on a tutorial:
Developing a Java Management Extensions (JMX) Manager and Connecting to a Remote JMX Agent Using NetBeans IDE 6.0
Exercise 5: Running the Manager
http://www.netbeans.org/kb/60/java/jmx-manager-tutorial.html#Exercise_1
Where the following code was given:
Too large to post here: JMXConnectorFactory.java
http://www.netbeans.org/kb/60/java/jmx-manager-tutorial.html#Exercise_1I am receiving the following error:
run:
Exception in thread "main" java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
        java.net.ConnectException: Connection refused: connect]
        at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:323)
        at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
        at com.toys.anagrams.manager.AnagramsManager.connect(AnagramsManager.java:58)
        at com.toys.anagrams.manager.AnagramsManager.getDefault(AnagramsManager.java:69)
        at com.toys.anagrams.manager.AnagramsManager.main(AnagramsManager.java:28)
Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
        java.net.ConnectException: Connection refused: connect]
        at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
        at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
        at javax.naming.InitialContext.lookup(InitialContext.java:392)
        at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1871)
        at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1841)
        at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
        ... 4 more
Caused by: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
        java.net.ConnectException: Connection refused: connect
        at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
        at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
        at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
        at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
        at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
        at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
        ... 9 more
Caused by: java.net.ConnectException: Connection refused: connect
        at java.net.PlainSocketImpl.socketConnect(Native Method)
        at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
        at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
        at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
        at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
        at java.net.Socket.connect(Socket.java:519)
        at java.net.Socket.connect(Socket.java:469)
        at java.net.Socket.<init>(Socket.java:366)
        at java.net.Socket.<init>(Socket.java:180)
        at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
        at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
        at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
        ... 14 more
Java Result: 1
BUILD SUCCESSFUL (total time: 1 second)I used the defaults as the tutorial has directed. I have also directed an email to Jean-Francois DENISE of the JMX Team. I know part of the problem is the connection being refused at the host. Any ideas?
I am using Netbeans 6.7.1
Preston@Large

Reading the tutorial might help.
Looking at the tutorial you referenced,
the sticker says "Requires NetBeans 5.0 / 6.1" - it does not say 6.7.1
This note is featured:
Note:
    * If you are using NetBeans IDE 6.7 or 6.5, please see the updated
version of this tutorial at Developing a Java Management Extensions
(JMX) Manager and Connecting to a Remote JMX Agent.And the title ends with ". . .Using NetBeans IDE 6.0"

Problem with NetBeans IDE 5.0

sir i am using NetBeans IDE 5.0 and i am devoloping a swing appliaction.i had a jar file for an extra look and feel but i dont know where to place it .i even added jar file to java>> properties >> library
but didnot work
the devoloper has given look and feel jar and has given code for implemengting it

hi
Try this
go to the project under which your java file is there and right click on the project and choose properties then under categories choose Libraries and after choosing that you will have to choose the Compile tab present on the right side and then click on Add JAR/Folder button and choose the jar file and then click ok.
If you had done the above things and still not working then probably you would not have set the Main Class.To set the Main Class go to project under which your java file is there then right click and choose properties and then choose Run which is under categories and then after doing that on the right hand side you will find a number of things out of that Main Class will be present, in that relevant text box you should give the
packagename.yourjavafilename(note: while giving the packagename.yourjavafilename in Main Class do not give .java extension for your javafilename ie. actually it is the class filename of your java file and it should also be noted that the java file name which you are giving in the Main Class should be your java file which contains the main method) then click on ok and now try to run the project then it should run properly.
hope this helps you

How to connect netbeans ide with ms access?

hi,
i am using netbeans ide (latest one) . I use new project option to create a new project.Then i use java desktop application option to create a java desktop application.Then i get an error unable to get schemas.
Could anybody explain what this error is and how to solve this problem.
Thanking you ,
Mani.

Netbeans related questions belong in netbeans forums.
Alternatively look into JDBC
Mel

Netbeans IDE question

Hello, I'd like to know if it is possible to execute a java application using netbeans IDE and having the command prompt to display the output just like JCreator for instance. Any feedback is appreciated. Thx
DImi

Hello, I'd like to know if it is possible to execute
a java application using netbeans IDE and having the
command prompt to display the output Yes! netbean is created for java.. you can do much of things with it..

Problem with netbeans IDE

hey! i am a learner of j2se 5.0 and am horrible at command line compiling. so i use netbeans IDE and well it has been doing excellently till now.
recently i had a porblem with ImageIcons and i found the exact problem which i was having but with repect to applets , that is, the images were not displaying properly. i have managed to solve the problem as far as applets are concerned, but it is not so with applications.
the thing is when i use the run function of the IDE, it displays all icons perfectly and its as if nothing is wrong.
it creates a .jar file which when i separately click to execute by going to its folder, does so but does not display any images. In fact it executes and behaves in such a way that it's exactly as if i have not used icons in the program- it displays everything else. should i change some setting of the IDE? but if some setting is to be changed, y is it running normally when run from the IDE( F6 key).
also when i used the command line (after some research to learn to use it) to extract all files from the .jar file, all the images were in it!!!as well as all the class files. so i can't even say that the IDE has not bundled up the images into the .jar file.
could some1 please help??i need help with .jar files and not applets.

first i deefined a method as shown in the Java tutorial
ImageIcon icon =createImageIcon("lion.jpg","name");
( within the contructor of the class)
then after completing the constructor for the class- (I am trying to display an ImageIcon on the background of a JFrame)
i provided the following definition after the constructor and b4 the main method:
protected static ImageIcon createImageIcon(String path,
String description) {
java.net.URL imgURL = LabelDemo.class.getResource(path);
if (imgURL != null) {
return new ImageIcon(imgURL, description);
} else {
System.err.println("Couldn't find file: " + path);
return null;
this is what i did-and when run from the IDE-it is perfect, but the jar file ggenerated when executed displays every single thing-all swing components e.t.c EXCEPT the image
the image is in the same folder as the source file- i checked because if not, an error is indicated- so that is not the problem here.
this same exact code works perfectly with applets and they execute perfectly both from the IDE and also when executed separately.
the same problem also iccurs when trying to display on labels and buttons.(only for JFrames not for JApplets)
the thing is in the java tutorial the method is given for applets and so my applets worked -so is there somethin i'm missing for frames- as far as i know they r very similar as far as usage is concerned.

Problem with NetBeans IDE 5

Hi All,
I' m using NetBeans IDE 5 . Present my IDE works fine with J2SE. I would like to work with Servlets. There is an error while using servlet classes.
Is this Installing problem ? or
am i add servlet.jar for NetBeans IDE 5?
Plase any one help me..................

Right click on the library tab under your project in the projects window and click "add library". Servlet should be on the list.
If not, check your installed modules and make sure servlet support is included.

How to install the jms bundle with netbeans IDE

hello friends,
i am feeling a lots of problem since i am having the package of jms but don't know how to install it with NetBeans 3.6 IDE. i am unable to mount it on the j2sdk1.4_02 . please tell me how to install it, so that i can use this using netbeans ide.

hi
send me the bundle or tip me on how to get it.
I have j2sdk1.4.2_03 and NetBean 4.1. I can try it out with you.
though, I am using the jsmsengine from sourceforge.org, java activation framework and java communication API.
when I get the gsm device, I'll be more resourceful or what do yoy use

Where to apply input verifier using netbeans IDE editor

Similar Messages

Maybe you are looking for