Where to make changes to calendar height, width, and misc changes

Apex 4.2
I have a page with a calendar on it. I have several issues with formatting the data within each cell. Currently, I use a substitution string to place the id in the calendar cell. Clicking the id will link to another page. What I notice is that for each id on a calendar cell (or date), it lists them one under the other. Is there any way to list them side by side? Also, I need to make changes to the calendar cells. I would like to expand the width and the height, but am not sure where to do this. Can anyone point me in the right direction of where to put this, and what to put to expand the height and width. Thanks in advance.

In regard to the cell size, if using Chrome or FF you can use the Inspect Element tool to locate the relevant class for the table the makes the calendar - it will be the TD that already has a height defined. Then you could add the required CSS in the inline page properties.
Details will depend on your theme.

Similar Messages

  • How to display the height, width and resolution of an EPS file

    Hi friends,
    I have to do a small module.. in that I have to display height, width and resolution of a given EPS file..
    please help..
    Thank you very much..
    Regards,
    krishna.

    Hi friends,
    I have to do display the resolution of an eps file..
    I have to use only Java.
    Can any body know the eps file format...
    I searched through net but I didn't find any best tutorial for that format..
    I am able to find the height and width from the eps file..
    By just opening that eps file.. I found %%Bounding box height width....as in some post posted by our jive member...
    In this way, is there any way to find the resolution..
    if any body knows this details.. please post.. Even if you have the file format tutorial post that one..
    Thank you.
    Regards,
    Krishna.

  • Background color changed from white to yellow and =25% changed to %% on email

    I type =25% on my email and sent out, background color changed from white to yellow and =25% changed to %%.

    Try leaving a space after the =
    Thus: = 25%
    Where and when did it change? Did it change inside Thunderbird? Did it change in the Sent folder? Or in a reply to you?
    = and % are used in certain types of email encoding; =20% often appears, meaning character 0x20 which is 32 denary or the space character. It is often used where an explicit space would be illegal, and this is common in URLs and other links. I'm thinking that =25% similarly has a special meaning. It ''shouldn't'' get decoded, but software is buggy.
    I can't reproduce it here, which is why I'm asking about how and when it changes. Where does the Microsoft software come into it?

  • HT5621 I have changed my apple id recently and the changes have been reflected on my iPad for both the apps store and the iCloud, however, my iphone still insist on using my old apple id for the iCloud while the app store is fine. how can i correct the pr

    I have changed my apple id recently and the changes have been reflected on my iPad for both the apps store and the iCloud, however, my iphone still insist on using my old apple id for the iCloud while the app store is fine. how can i correct the problem?
    Thanks

    Hi Baem_leeds
    Welcome to the Support Communities!
    If you change your Apple ID you will need to sign in with the new information or password the next time you use an Apple service or feature that uses Apple ID. If you have multiple devices that use features and services that require an Apple ID, you will need to sign in again on each device.
    The links below will provide additional information:
    Where can I use my Apple ID?
    http://support.apple.com/kb/HT5616
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Cheers,
    Judy

  • Setting a fixed width and a changing height for a component within a panel

    Alright guys here's my next question. I'm now having trouble trying to figure out how to only resize the height of a JTabbedPane yet keep the width fixed. In other words, as the JPanel its in changes in size, I'd like to have the width of my tabbed pane stay a certain value yet let the height of it adjust to the panel's height as it changes. Is there a way to somehow extract the panel's height into a int or something and then when using the setPreferredSize() function simply implement this retrieved value into the function's height parameter? I've tried messing around with Dimensions and getHeight() functions and the sort but to no success. For instance, within the constructor of one of my JFrames using System.out.println(this.getHeight()); prints 0, when of course this is not the case in reality for the frame's height. The panel's changing size is due to the user resizing the window its in. In one of my previous threads in this forum I learned how to use a GridLayout (it was 2 rows and 1 column in size) to keep the height of the top area in a BorderLayout fixed, yet as the user resized the window, the layout would stretch the area width-wise accordingly. However, that was because I had 2 cells in the layout to control, and I know this wouldn't work with only 1. Any ideas?

    You still apparently haven't read the tutorial on using Layout Managers to understand the capabilites of each Layout Manager.
    For instance, within the constructor of one of my JFrames using
    System.out.println(this.getHeight()); prints 0, when of course this is not the case in reality for the frame's heightComponents don't have a size until the GUI is visible on the screen. That is until you've done a pack(), or a setVisible( true ). You should never be using setSize().
    Layout Managers use setPreferredSize() ,setMinimumSize() and setMaximumSize() as suggestions for determining the layout. Although most layout managers don't use all the suggestions, which is why you need to read the tutorial to find out how the layout managers work.
    I'm now having trouble trying to figure out how to only resize the height
    of a JTabbedPane yet keep the width fixedWell, I don't understand the requirement. The preferred size of a tabbed pane is equal to the preferred size of the largest tab added to the tabbed pane. So I don't understand the concept of artificially changing the vertical height.
    Anyway reread the tutorial on "How to Use the Border Layout". Two of the 5 areas respect the width of the component but alter the height to fill all the available space.
    If you need further help then you need to create a [url http://homepage1.nifty.com/algafield/sscce.html]Short, Self Contained, Compilable and Executable, Example Program that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
    And don't forget to use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags so the code retains its original formatting.

  • Make an image of height h and width w

    Hi all,
    I want to create an black or any colored image of height" h "and width "w" ,how can I do that ?
    Thank you.

    Hi,
    these articles may help you:
    http://www-128.ibm.com/developerworks/library/j-begjava/index.html
    http://javaalmanac.com/egs/java.awt.image/CreateBuf.html
    On the second page read also related examples
    L.P.

  • SAP PP: In BOM how to where to maintain the details like Length, Width and Quantity

    Dear All,
    In SAP PP where to maintain the details like Length, Width, Quantity of the material for production information.
    Eg:
    Client will procure a material of 10milli meter Thickness Mild Steel material of fixed dimensions lets say 4meters x 4Meters
    {so the material dimensions are 4000Milli Meter (Length) x 4000Milli Meter (Height) x 10milli meter (Breadth) Mild steel Sheet}
    For production the above plate is to cut into desired sizes as per the drawings given by Design Department of "N" no qtys.
    (let say in drg for the component the desired sizes are 1000Milli Meter (Length) x 1000Milli Meter (Height) x 10milli meter (Breadth) of 4Nos}
    In BOM where all we can maintain the above details. The same details wants to send it to production for their quick reference.
    Also how the system will calculate the weight automatically for procuring of raw material with the above details.
    Note: Purchase department will procure the full length as i mentioned above but not the desired lengths to be produce for production.
    Pls let me know if any further information required for the solution to suggest.
    rgds,
    VKUMAR A

    Hi,
    You can use two options...
    1. Classification...create characteristics like length, height and breadth with CT04, assign these chars to class (CL01) and assign this class to your raw material in classification view in material master (MM02). When you receive the material from vendor during GR enter the values for characteristics. (activate Batch management).
    Now when you create the Production Order, in the components for this raw material, assign the batch..
    When this is issued against the Production order , production people can see the details of values in the batch...
    2. Try to explore the option of variable size item concept during creation of BOM..
    Thanks
    Kumar

  • Charting using ActionScript and chart height,width and axis labels

    hello, i am creating charts using action script but can't
    seem to do 2 things right now. 1. put labels on the axisis. 2. i
    can't set the height/width to 100%. does anyone know how?...below
    is the function i use to create the charts
    public var myChart:BarChart;
    public var series1:BarSeries;
    public var legend1:Legend;
    private function addGraph():void {
    // Create the chart object and set some
    // basic properties.
    myChart = new BarChart();
    myChart.showDataTips = true;
    myChart.dataProvider = feedRequest.lastResult.root.data;
    // Define the category axis.
    var vAxis:CategoryAxis = new CategoryAxis();
    vAxis.categoryField = yAxis;
    vAxis.dataProvider = feedRequest.lastResult.root.data;
    myChart.verticalAxis = vAxis;
    myChart.width=100;
    myChart.height=100;
    var la = new LinearAxis;
    // Add the series.
    var mySeries:Array=new Array();
    series1 = new BarSeries();
    series1.xField=xAxis;
    series1.yField=yAxis;
    series1.displayName = xAxis;
    mySeries.push(series1);
    myChart.series = mySeries;
    // Create a legend.
    legend1 = new Legend();
    legend1.dataProvider = myChart;
    // Attach chart and legend to the display list.
    chartWindow.addChild(myChart);
    chartWindow.visible=true;
    }

    use the percentWidth and percentHeight properties.

  • PO number range- change from internal to external  and then change it back

    we have following situation- we had certain issues with the system where most of the data got curreptrd except data relative to procurement for dates March 7 to March 30.  We have extracted the procurement data - PR / PO etc for the dates March 7 to March 30 and we want to upload this data in the uncorrupted enviornment dated  March 6 using the old numbers originally assigned by the system.
    I need to change the configuration for PR and PO number range from Internal to external so we can upload PR and POsfrom March7 to March 30 and then swich the number ranges back to internal so we can enter new data dating from March 31.
    What is the best way to do this?
    Thanks in advance
    Raj

    Hi
    Create external number range and assign  it to theno. range external in that Document type then you can use both internal and external number ranges for that doc without disturbing the system once completed remove the external number for that doc type. while creating the PO give the number you want before saving so that the PO will be saved with the number you had given.
    Note: Make sure that you are not using duplicate PO no already assigned
    Kiran

  • I changed my Apple ID password and it changed my daughters imessaging.

    I changed my apple ID password and for some reason my daughters who have devices linked to my ID/icloud account are having trouble using i message. How do I help?

    If you both share an Apple ID then she should just go to Settings>Messages>Send and Receive From and make certain only her phone number and email address have a check mark.  Have her Tap on any that are not her's and the check will clear and her Messages will work fine.  Do the same on yours.

  • How to make panel collection with auto width and height in popup dialog ?

    Hi,
    I have ony af:popup in that I have added af:dialog. And in this af:dialog I have added af:table which is surrounded by af:panelCollection.
    Means my popup structure is like as below
    af:popup
    af:dialog
    af:panelCollection
    af:table
    If I set resize="on" in af:dialog then I can able to resize my popup dialog but the panelCollection inside the af:dialog is not become auto adjusted.
    I am able to make panelCollection width auto adjusted by using AFStretchWidh style class but not able to adjust its height.
    Hope you can understand my problem and pls try to provide me its solution if you have already implemented this.
    Regards,
    DevD

    I believe you are using af:panelGroupLayout because there are some other components except af:panelCollection, so try this combination
    <af:popup id="p1">
      <af:dialog id="d2" resize="on" stretchChildren="first">
        <af:panelStretchLayout id="psl2">
          <f:facet name="bottom"/>
          <f:facet name="center">
            <af:panelCollection id="pc1">
              <f:facet name="menus"/>
              <f:facet name="toolbar"/>
              <f:facet name="statusbar"/>
              <af:table var="row" rowBandingInterval="0" id="t1">
                <af:column sortable="false" headerText="col1" id="c1">
                  <af:outputText value="#{row.col1}" id="ot5"/>
                </af:column>
                <af:column sortable="false" headerText="col2" id="c3">
                  <af:outputText value="#{row.col2}" id="ot4"/>
                </af:column>
                <af:column sortable="false" headerText="col3" id="c2">
                  <af:outputText value="#{row.col3}" id="ot3"/>
                </af:column>
                <af:column sortable="false" headerText="col4" id="c4">
                  <af:outputText value="#{row.col4}" id="ot2"/>
                </af:column>
                <af:column sortable="false" headerText="col5" id="c5">
                  <af:outputText value="#{row.col5}" id="ot1"/>
                </af:column>
              </af:table>
            </af:panelCollection>
          </f:facet>
        </af:panelStretchLayout>
      </af:dialog>
    </af:popup>Put only af:panelCollection in CENTER facet of af:panelStretchLayout and use other facets of af:panelStretchLayout for other components.

  • Overage Fees - Upgrade Plan and then change back for only $20 - and no change to contract?

    I am on the Nationwide 700 minute family plan with two lines and finally on a month to month contract.  Just saw on my account that I am over my allowance by 67 minutes ($30.15) and I still have five days until my billing cycle ends.  
    I called VzWireless and the lady on the phone said that there is a way to minimize the overage expense this one time.  According to her, if I "upgrade" my voice plan to the 1400 minute plan before the 21st of the month I will end up not having to pay any overage fees on the peak hours (at least $30 as of writing this with five days to go) and would only have to pay the difference in plans which works out to be an extra $20.  She also said she could "future date" an order to move my plan back to my normal 700 minutes after the bill is issued on the 21st so that I would not have to maintain the more expensive plan.
    Frankly, this sounds too good to be true -  I mean why wouldn't every Tom, Dick, and Harry that goes over on their minutes do this then?  Maybe I am the only person who has not figured this out?  The whole reason I am over on minutes this month is because I got caught in a Directv/U-Verse teaser scam and had to call each company's customer support lines and ended up on hold for hours!  Needless to say I am skeptical...
    Is there any merit to this?  Is it true that I can change my plan without renewing to another two year contract?  Are there hidden fees? Can I trust Verizon?  

    Yes, this is true.
    You can change your plan to the 1400 minute plan prior to the end of your billing cycle. Just make sure that this change is "backdated" to the beginning of the billing cycle you are currently in, so that you have those 1400 minutes available to you for this entire cycle. You will then not go over your allowance.
    After your current billing cycle ends, you can change your minute plan back to the 700 min plan.
    I don't know if I would want the CS rep to do both changes at the same time, as this leads to more likely of a mixup which may impact you in a negative way. Might be better to do one at a time.
    Edit: This practice has been around for awhile. Unlike you, several people who have this service pointed out just like to complain that Verizon should just do this without being asked so that they would never incur overages. Those same people would then just complain that their bill increased without them giving permission to increase their minute allowance.

  • I upgraded to maverick just days after it's release and have had few problems until recently. the last month or so on my ipad i have to constantly change my password for my exchange mail. First i change it on my laptop and then change it on my iPad. Ver .

    Anybody help me with this?

    Not sure how to do this except to reply to myself.
    The question I asked is not "answered," but for whatever reason Acrobat XI has settled down and is working normally as before.  Don't have a clue why.  I did not make any further changes in anything.  Thanks to those who read my question and pondered. 

  • Not able to change slide duration. It's set to 4.0; I change it to 3.0 and it changes to 6.5 or something. What am I doing wrong?

    I can't seem to change the slide duration in iMovie. It's set to 4.0 automatically. I change it to 3.0. The program resets it to 6.5 or something I never intended. What am I doing wrong?

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Changing scaleX/scaleY on parent scales the children but doesn't update  height/width property ?

    have created a custom component - MyImage - that has two children including a Bitmap as well as a Sprite.
    My display object hierarchy is as follows -
    mx:Canvas
      view:MyImage
         mx:Bitmap
         my:Sprite
    If I change the MyImage.scaleX, scaleY property, the children scale as I would expect them to.
    However when I try to place the children in the center using placeAgain() on getting a resize event:
        public function placeAgain():void
            if (image==null) return;
            var pCanvas:Canvas = this.parent as Canvas;
            if (image.width <= pCanvas.width)
                pCanvas.horizontalScrollPolicy="off";
                image.x = (pCanvas.width -image.width)/2;
            else
                pCanvas.horizontalScrollPolicy="on";
                image.x=0;
            if (image.height <= pCanvas.height)
                pCanvas.verticalScrollPolicy="off";
                image.y = (pCanvas.height -image.height)/2;
            else
                pCanvas.verticalScrollPolicy="on";
                image.y=0;
            alignKids();
    I find the image.height & width have not changed despite the image getting scaled!
    Isn't the child supposed to have its bounds changed after scaling its
    parent ? Especially after the child has actually been scaled correctly ?
    Why are bounds of the child stuck at the same value as before scaling? I
    am not caching the Bitmap, have not turned on caching of bitmaps.

    If I'm not mistaken, the bounds are updated with the scale. You rare not referencing the bounds, your referencing the width and height properties, which is a bit different. What happens if you use the getBounds function to get your dimensions?

Maybe you are looking for