Where to see for the trace?

Hi,
I have set autotrace on.Now i want to see the trace.Where do i see it?Which file specifies teh path if the dump file which has the exection plan.

As in you have issued the SQL*PLUS command 'SET AUTOTRACE ON'?
I think you are getting a SQL*PLUS autotrace which runs at the client mixed up with setting SQL_TRACE=True (or setting a 10046 event) which acts upon your session on the server.
AUTOTRACE will just generate the metrics and execution plan for any SQL executed in that session, and print them to the screen.
What is it exactly you want to do?
Carl

Similar Messages

HT4400 I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

This should be able to help ya out -> Support for wireless braille displays in iOS 6

Question about the Filter type for the trace provide "Microsoft-Windows-Kernel-File"

Hello all,
I have moved this question from the Windows
Server General Forum accorfing to the suggestion from Mr. Justin Gu
I have a question about the Filter function for the trace provider "Microsoft-Windows-Kernel-File".
I can find the Filter function with the following operation.
Mr. Justin Gu wrote:
> You create a Data Collector Set for the trace provider "Microsoft-Windows-Kernel-File" and finish completely, then you > can right click it and select Properties.
In the Properties dialog box, click Filter and
then select ‘Edit…’. You will be> able
to see the Filter type and Filter data in the Filter dialog box.
What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.

What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.
I'm looking for the same information.

Where to look for the computed stats collected using gather_table_stats

I have used analyze command before but new to gather_table_stats.
I have executed gather_table_stats procedure as given below. Now where to look for the statistics estimated and also what are the important parameters I need to look in the stats ? Any major difference between analyze & gather_table_stats ?
SQL> exec dbms_stats.gather_table_stats(ownname => 'TPDBS01A', tabname => 'x_TPD_STG_TL_SF_LEGAL_OWN
ER' , estimate_percent => 50, method_opt => 'for all indexed columns size auto');
PL/SQL procedure successfully completed.

The command "analyze table" is deprecated for gathering optimizer statistics. But it is still the only command to get for instance the chained rows. This command is no longer maintained for new features, so if you use this command to collect statistics, it might not collect all needed numbers for the optimizer so the plan could be wrong.
The package dbms_stats is collecting all the figures that the optimizer needs to genererate an optimal access plan. All new database features are incorporated only here.
The statistics numbers can be found in the normal tables like USER|ALL|DBA_TABLES, ...TAB_COLUMNS, ...INDEXES, ...IND_COLUMNS etc. There you can find for instance number of rows in table, clustering factor for indexes and more numbers like this. They are not really needed for us human beings, they are used by the optimizer to generate the access plan.

Reg: where used list for the any logical (or) physical files

Hi
Is there any possible way to check the where used list for the any logical (or) physical files (Tcode: FILE)
Please let me know.

if the path is hard coded in the program...
you can use : RPR_ABAP_SOURCE_SCAN to scan the system and find out where its hard coded....

Where to look for the attributes functionality of CL_GUI_ALV_GRID?

I am trying to use mc_style-f4 of CL_GUI_ALV_GRID.
But it is noe getting triggered.
Where can I look for the functionality of the Attributes section of CL_GUI_ALV_GRID?
(help.sap.com discusses about the events and mthods only and not the attributes section..)
Thanks,
Ven

SE24 shows you the methods and attributes.
and help.sap.com shows the functionality / usage of the methods. it does not tell about the attributes part.
I need to know this usage information about the attributes.
Say for example mc_style_disabled - this disables a cell.
MC_STYLE_F4 what does it do etc..

Where to Look for the Service Interface in the Start Step?

hi @,
I have defined a Service interface in the start step, now I want to use the same in my Web Dynpro Application to pass data and start the BPM . Where can I look at the interface generated and BPM deployed I ddn't use any WSDL but created the same using the SI tool help in BPM.
DO I have to do any other setting and or publishing the same in Registry etc.
REgards,
Amit

Hi There,
>Where can I look at the interface generated and BPM deployed I ddn't use any WSDL but created the same using the SI tool help in BPM.
>
>DO I have to do any other setting and or publishing the same in Registry etc.
everytime i looked up the location of an deployed WSDL i used the "Single Service Administration" in the NWA. In that tool you can search for the name of the WSDL-Interface which you connected to the startevent of your bpm-process. In a option downside the Single Service Administration you can open the WSDL which opo ups in a new browser. Copy that URL from the opened window and cut somthing like &=ws_policy at the end of the URL.
You can start a Process with this URL if you send a propper SOAP-Message to it. You don't need to publish the Service in the Service Registry to use it.
Hope this Helps
With kind regards
Markus

Where is support for the new Nikon D7200 DSLR Camera

I've had the New Nikon D7200 about three weeks Now And apple has laid down on the job and update the Raw support list for the D7200. iPhotos would even recognize the pictures taken period. Now Photos the so called replacement will download I guess what you call Thumbnail version But when click on edit a window with a Triangle and Exclamation Point. Apple should have come out with an update at least two weeks ago.

If you are trying to use Camera Raw with Lightroom, that won't work. Lightroom does not use the Camera Raw plug-in. The D810 is supported in Camera Raw 8.6 release candidate and the DNG converter 8.6 release candidate. That should indicate that it will probably be supported in the next release of Lightroom. In the meantime you could try downloading the DNG converter 8.6 RC and convert your raw images to the DNG format. Adobe has not announced when Lightroom 5.6 will be available.

How do I see the question I asked previously - it is confusing to me where to go for the answer once I sign in?

I asked a question about Firefox blocking my access to images with Joomla websites - I have already submitted this question and confirmed it though my email account - but now I have no idea where I go to see if anyone answered it. Can someone please let me know as I am confused about how you see your original question and hopefully some kind of answer to it??

After you sign in, look just under
'''Firefox Support Forum'''<br />
'''The Official Community-Driven Support Web Site for Firefox'''
you will see the line(s)
'''Sort: Most Recent Most Requested Show: All Unsolved Solved No Replies My Contributions'''
click on My Contributions to see your questions and questions to which you have supplied responses.
<br />
<br />
'''Other issues needing your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.<br />
<br />
*Shockwave Flash 10.2 r152
**Very recent security update version 10.2 r153 released
*Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
**8 updates behind; your version has known security issues
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Where to see all the posts presented by me?

Dear All
where i can see the total number of posts(just number) presented by me in SD forum?
Out of my posts some might be correct answers--some might be helpful--where i can see all these(any one place to give me clarity)
Suppose if i participated in 500 posts by my comments after my joining in forum-----
10 may be right,
10 may be helpful,
480 posts might be of no-use...
where i can see this??(any one place to see all)
Please help...
Phanikumar

If you want to know about threads posted by you, then select 'Authored'>Discussions and there from the drop down option you can find out which all threads have been answered (green tick) and unanswered as well (blue question mark sign)
If you intended to know about your participation to other's thread, then you can filter it with 'Participated' option as mentioned in below screenshot.
I didnt find any option that tells total number of posts other than counting manually.
Jason Lax can answer better.
Regards,
JK

HXXCEDT0 need to find out where are inputs for the form zk- zkq-rest

Hi guys,
im trying to modify by custumer exit, the program H99CEDT0 (the one that prints the payrroll for employees)
my problem is that i need to find where some value is stored before printed in the form.
the field is zkq-rest, i find a zq and i know that is from that table that get the field that i need, i need to find a form, method or something that extract and compute data from the zq table and stored in the zkq (absences quota)
any ideas?

Hi,
where you maintain critical limit for each items?
Try with below
You can customized batch program to perform every day to check all open PO items to check GR Qty and then send e-mail reminder
Take help from your ABAPer on this
Hope this will help to you
Regards,
Sankaran

How can I specify where to look for the server installation of the Oracle client?

I assume changing the $ORACLE_HOME variable would get ORE to use 12.1.0.2 instead of 11.2.0.3, but I only want to change which Oracle R uses. How can I override the server's $ORACLE_HOME location when I'm connecting to the database from the client side?
OS: Linux Mint 17 / Solaris 11.1
R version: 3.1.2 (both)
ORE version: 1.4.1 (both)

On the server, the Oracle R Enterprise installation is tied to an Oracle Database installation. Have you installed Oracle R Enterprise for both the 11.2.0.3 and 12.1.0.2 databases?
If so, the client connect will be able to find the ORE server when you connect to the database using ore.connect:
R> ore.connect(user = "username", sid = "database sid", host = "hostname/database server", password = "user password", all=TRUE).
During the ORE installation on the server, we lay down software bits on the OS, install a schema into the database, plus add some libraries to $ORACLE_HOME.
Sherry

I recently upgraded to Windows 8 and find that I cannot sign in to Adobe Export. Any ideas of where to look for the problem?

Previously I downloaded a PDF file and was asked to sign in to convert. I just upgraded to Windows 8 and since have found that the activity box still appears on the right side of the page but when I try to sign in it does not complete the connection. I get an empty box that pops up but goes no further. Not sure what I am doing wrong.

Hi,
It might be possible that you have not upgraded the Adobe Reader.
Please upgraded it to the 11.0.9 version then you will be able to sign-in.
Or you can navigate to the below link to use online service:
The Most Reliable Tool to Convert PDF to Word or Excel | Adobe ExportPDF
Regards,
Florence

Where to look for the newest IISPROXY?

According to note 629946, we cannot find it at all.
Please help, points will be given, thanks!

Greg,
IISProxy is deprecated - http://help.sap.com/saphelp_nw2004s/helpdata/en/43/65c078b39b0398e10000000a1553f6/frameset.htm.
Why do you want to use it instead of Kerberos?
Anyway, if you still need it I can send you...
Cheers,
Marcelo
Message was edited by:
Marcelo Behr

Where is the HTML-Code for the Dashboard-Links defined? How to edit it?

Hello everyone,
I'd like to know where HTML-Code for the Dashboard-Links (My Dashboard, insert random Dashboardname here, ...) is defined.
Inspecting HTML-Code via the browser, i'll got the following HTML-Tag:
an <a'' href="...url"... class="CurrentPortal" name="DashboardBannerLink" title="...">Dashboard-name</a''>
What i know is, that i can modify portalbanner.css and edit the style of those links.
But thats not what i want, though. I want to modify the html-code itself, for example change the layout of the table etc, to meet our company's corporate design requirements.
Thats why i tried to find the terms PortalLink and CurrentPortal within the Message-Database (/msgdb).
Unfortunately, i got no results.
As a consequence, I believe HTML for those Links is generated by saw.dll internally and therefore can not be edited.
Now i need someone to prove me wrong ;)
Thanks in advance,
Chris
Edited by: Chris2010 on 16.08.2010 11:11
-had to edit the html tag, as the code was turned into a clickable link when i posted the thread

I still didn't find a solution until now, although i checked almost every xml file, that i was able to find.
At the moment I am sure, that it would be necessary to edit sawm-Parameter "bannerHtml" to meet my requirements. Now, i dont know whether its possible to edit it or not, since those saw-parameters do not seem to be documented on the web.
That's the part, i found in dashboardtemplates.xml (Line: 362)
<WebMessage name="kuiDashboardBanner" translate="no">
<HTML>
<table class="PortalBanner" width="100%" border="0" cellspacing="0">
<tr>
<td class="PortalLogo">
"<\a href="@{dashboardsURL}">
<img class="PortalLogoImage" border="0" src="fmap:Portal/PortalLogo.gif"/></a>
"</td>
<td class="PortalTop" style="vertical-align:top">
<sawm:param name="bannerHtml"/></td>
</tr></table>
<sawm:messageRef name="kuiDashboardMainBar"><sawm:setParam name="product">dashboard</sawm:setParam></sawm:messageRef>
</HTML></WebMessage>
-----

Where to see for the trace?

Similar Messages

Maybe you are looking for