Where to set parameter file to use in expdp

hai i am new to use expdp i want to use parameter file but i dont know where to setup paramter file and how to use query
my object to export user (pibs) and pibs user have create_date column
in all tables of pibs and i want to export pibs using create_date=01-jan-07

run the following command as plib user for every table:
Remember to create the DIRECTORY as sys first
dumpfile=expdp.dmp
directory=export_dir
logfile=expdp.log
job_name=raw_exporta
tables=<talename>
query="where create_date >= TO_DATE('2007-01-01 00-00-00','YYYY-MM-DD HH24-MI-SS','NLS_CALENDAR=GREGORIAN')
Hope this helps

Similar Messages

Where's my parameter files

I have the oracle installed on Windows. If I use 'startup;' command to start the database without specifying a parameter file, is there a default pfile or spfile used to start it?
I noticed that on OEM, there are some parameters I can change, or I can use Alter system set... command to alter some parameters, but are those changes written to a parameter file?
If there is a default parameter files, where is it put? Under 'Oracle HOme\admin\myInstanceSID\pfile', I did find a parameter file, 'init.ora.982004131510', but it was not used for sure when I used 'startup;'.

Hello There,
If you have installed 9i database with default options then the database server is using spfile. So if you make any changes then they are going to spfile and not in pfile until you set your scope for pfile.
In my opinion you should change that funny number pfile to initdb.ora and then try to startup the db using startup pfile=<pfile path> command.
You can create new pfile from spile and vice versa using this command.
create pfile from spfile (check the syntax).
and then start the database using new pfile and remove the spfile, so that database will start using pfile next time you reboot the system or start the db.
Cheers
Amit

Knowing service_name of my database; where to find parameter file.

To All,
I have Oracle 9i. How can I find the service_name (inorder to specify it in the tnsnames.ora) of my database..?
Also Is it possible that the name of my parameter file in the location 'H:\orawin95\admin\thomas\pfile\' be init.ora ....? ie, without the instance name as a suffix to the filename after init. Or is the parameter file in some other location...?
my oracle_home is 'H:\orawin95'
db_name is : 'thomas'
instance name is : 'toms'
thanks in advance
[email protected]

service name is nothing but your tnsname or the string you connect to the database from a client machine. Look into your tnsnames.ora file or to create one, use network configuration assistant.
You can have init file with suffixing its instance name, but, it would be good for administration purpose in the multi-instance, spefically, oracle. You can also keep the init.ora file in any directory that you need, the only thing is that you need to specify the file location when starting your database with pfile parameter with startup command.
Jaffar

Where to put firmware files when using hwdetect

I am using release 0.7.1. AFAIK in 0.7.1 hwdetect is used instead of hotplug. Where hwdetect expect to find firmware files? In the case it can be changed, please tell me where.

it's udev that is handling firmware files, and I placed mine for atmel wireless in /lib/firmware works fine

Where to set parameter EO_INBOUND_TO_OUTBOUND in PI?

I cannot find EO_INBOUND_TO_OUTBOUND in the instance profile or exchange profile.
Could you tell me where to display/change this paramter? Thanks a lot!

Hi Ashley,
Please see krishnas reply in this thread for exact steps:
Change the parameter in XI
Regards,
---Satish

To change parameter file used for tnsping

Hi
I can ping the server.
I can connect to the server.
Just for fun I want to tnsping for connectivity to it. When I try, I see this:
C:\>tnsping prod
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 21-NOV-2008 16:22:1
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\10g_Test\network\admin\sqlnet.ora
TNS-03505: Failed to resolve name
The parameter file worries me. The tnsnames that I have is located here
C:\oracle\ora92\network\admin

Dan A wrote:
Thanks. This is peculiar:
C:\>set tns_admin=C:\oracle\ora92\network\admin
C:\>tnsping DEV
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 21-NOV-2008 17:12:1
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\10g_Test\network\admin\sqlnet.ora
TNS-03505: Failed to resolve name
That is a bit strange. I'd go to the sqlnet.ora referenced (c:\10t_test\network ....) and set client trace level to 16, set client trace file to a specific value (no default) and set client trace directory to a specific value (no default). Repeat your tnsping, then dig into that trace file for clues. There will be a lot there that you don't understand, but I believe you will find clues as to why it's not looking at where you set tns_admin.
Still using the 10g path. Yes, I could place the tnsnames there, but I would really rather not!
Thanks.
DA

Use of Parameter file in DAC

Hello Experts,
I am new to DAC10.x version. Can any please tell me why the parameter file so much important in DAC. Any example link will also helpful.
Thanks
A

The parameter file is used as a way to dynamically populate certain values in the ETL mappings and mapplets. Its useful because it allows you to change values in the DAC instead of manually editing the Informatica mappings. It provides a layer of flexibility that you would not have by Informatica itself.

Parameter files in Oracle 9i

Hi.
I have an easy question for you...
Where is the parameter file for each SID with 9.2 on Windows? My guess it is:
ORACLE_HOME\admin\ORACLE_SID\pfile\init.ora.12345
(bunch of numbers at the end)
This is different from 817, where the file was init_SID_.ora.
Could someone explain if this is the only parameter file?
Also, what is spfile?
Or, please point me to some documentation that explains this...
Thank you.
Robin

Hi Robin,
Here is a link to the documentation on spfile - http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96521/create.htm#1012672
Hope this helps.
Sujatha.

Parameter file in DAC

Hi All,
I am new to BI Apps and DAC, I have created a custom mapping in informatica and I am getting the following error I tried to unit test it in DAC. I have defined the source system folders, created a new task, subject area and execution plans. I am not able to understand to why its not able to read the parameter file, Please let me know how to approach for this error.
Appreciate your help !
Thanks,
Rahul.
All Task Batches
Informatica Session Batch
INFORMATICA TASK:Custom_SDE:SDE_PSFT_PurchaseScheduleLinesFact_Full:(Source : FULL Target : FULL)
2012-01-11 23:16:56.182 INFORMATICA TASK:Custom_SDE:SDE_PSFT_PurchaseScheduleLinesFact_Full:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:Custom_SDE:SDE_PSFT_PurchaseScheduleLinesFact_Full:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Request to start workflow : 'SDE_PSFT_PurchaseScheduleLinesFact_Full' has completed with error code 17
Error Message : Parameter file does not exist.
Command Used: pmcmd startworkflow -sv is_obieetlqa1 -d Domain_obieetlqa1 -u Administrator -p **** -f Custom_SDE -paramfile /app/infa/server/infa_shared/SrcFiles\PSFT_9_1_FINSCM.DataWarehouse.Custom_SDE.SDE_PSFT_PurchaseScheduleLinesFact_Full.txt SDE_PSFT_PurchaseScheduleLinesFact_Full
Workflow Message:
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Wed Jan 11 23:16:57 2012
Connected to Integration Service: [is_obieetlqa1].
Starting workflow [SDE_PSFT_PurchaseScheduleLinesFact_Full]
ERROR: Workflow [Custom_SDE:SDE_PSFT_PurchaseScheduleLinesFact_Full[version CheckedOut]]: Parameter file [app/infa/server/infa_shared/SrcFiles\PSFT_9_1_FINSCM.DataWarehouse.Custom_SDE.SDE_PSFT_PurchaseScheduleLinesFact_Full.txt] not found. Please check the Integration Service log for more information.
Disconnecting from Integration Service
Completed at Wed Jan 11 23:16:58 2012
=====================================
ERROR OUTPUT
=====================================
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1)
pmcmd startworkflow -sv is_obieetlqa1 -d Domain_obieetlqa1 -u Administrator -p **** -f Custom_SDE -paramfile /app/infa/server/infa_shared/SrcFiles\PSFT_9_1_FINSCM.DataWarehouse.Custom_SDE.SDE_PSFT_PurchaseScheduleLinesFact_Full.txt SDE_PSFT_PurchaseScheduleLinesFact_Full
2012-01-11 23:16:58.792 INFORMATICA TASK:Custom_SDE:SDE_PSFT_PurchaseScheduleLinesFact_Full:(Source : FULL Target : FULL) has finished execution with Failed status.

The parameter file is used as a way to dynamically populate certain values in the ETL mappings and mapplets. Its useful because it allows you to change values in the DAC instead of manually editing the Informatica mappings. It provides a layer of flexibility that you would not have by Informatica itself.

Where to set config "Tax jurisdiction" in configuration ?

Hello everyone.
I am in Thailand .
my SAP system donot need tax jurisdiction . where to set configure for not using Tax jurisdiction in the system ?
please help.

Hi,
You need to make setting in customizing OBCO and OBCP.
Regards,
Gaurav

About User command & SET Parameter

Hi All,
What is the User Command? What it means? And how to handle in normal and ALV Report..?
What is happening when I write the statement like below.
SET PARAMETER ID 'TAB' FIELD 'ZPCA' ? What is the purpose of set parameter in the program..?
Akshitha.

Hi,
see this prog..
sy-ucomm is for doing the functions what the user wishes to do at that particular event. You use it in menus and other place . this mainly in using <pfstatus>
USER COMMAND will perform actions on radiobutton click, or wen puhbutton is cliketced
in this if the user clicks a push button, see bold letters..in the prog
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) lb1.
PARAMETERS : a(10).
SELECTION-SCREEN COMMENT 40(15) lb2.
PARAMETERS : b(10).
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN PUSHBUTTON 10(10) lb3 USER-COMMAND pb1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN PUSHBUTTON /10(10) lb5 USER-COMMAND pb3.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN PUSHBUTTON /10(10) lb4 USER-COMMAND pb2.
*SELECTION-SCREEN BEGIN OF SCREEN 200 AS WINDOW TITLE T2.
SELECTION-SCREEN BEGIN OF BLOCK b1.
PARAMETERS : ch1 AS CHECKBOX, ch2 AS CHECKBOX, ch3 AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2.
PARAMETERS : rb1 RADIOBUTTON GROUP a,
 rb2 RADIOBUTTON GROUP a,
 rb3 RADIOBUTTON GROUP a.
SELECTION-SCREEN END OF BLOCK b2.
*SELECTION-SCREEN END OF SCREEN 200.
INITIALIZATION.
lb1 = 'ENTER A VALUE'.
lb2 = 'ENTER B VALUE'.
lb3 = 'DISPLAY'.
lb4 = 'EXIT'.
lb5 = 'CALL NEXT'.
AT SELECTION-SCREEN.
CASE sy-ucomm.
 WHEN 'PB1'.
 LEAVE TO LIST-PROCESSING.
 WRITE : a, b.
 IF ch1 = 'X'.
 LEAVE TO LIST-PROCESSING.
 WRITE 'FIRST CHECKBOX IS SELECTED'.
 ENDIF.
 IF ch2 = 'X'.
 WRITE :/ 'SECOND CHECKBOX IS SELECTED'.
 ENDIF.
 IF ch3 = 'X'.
 WRITE :/ 'THIRD CHECKBOX IS SELECTED'.
 ENDIF.
 IF rb1 = 'X'.
 WRITE :/ 'FIRST RADIOBUTTON'.
 ELSEIF rb2 = 'X'.
 WRITE :/ 'SECOND RADIOBUTTON'.
 ELSEIF rb3 = 'X'.
 WRITE :/ 'THIRD RADIOBUTTON'.
 ENDIF.
 WHEN 'PB2'.
 LEAVE PROGRAM.
 WHEN 'PB3'.
 CALL SELECTION-SCREEN 200.
ENDCASE.
SET parameter :
this is used to pass a value from one report a memory n from there we can use in the same report or the other report..
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens
Hope this helps u,
Regards,
Arunsri
Edited by: Arunsri on Mar 11, 2008 11:52 AM

Set Parameter ~webgui_combobox_with_keys

Hi Experts,
we have a problem on sorting dropdown lists. Before update to SP19 on ECC 6 the dropdown lists in WEBGUI has been sorted by keys. In note 495409 it is discribed to set the parameter ~webgui_combobox_with_keys to 1. But it is written for WebGui 6.10.
I don't know how to set the parameter on intigrated ITS.
http://help.sap.com/saphelp_nw70/helpdata/en/99/a6c4e58f4e2e4a845f9c1d35bff721/content.htm
Could you help me?
Best Regards
Martin Schmitt

Hi Martin,
The parameter you mention is valid from 6.10 to current relase ( i.e 7.10 )
Where to set parameter , check below step :-
login to ECC system
goto to tcode SICF
Click F8
drop down to location :- /default_host/sap/bc/gui/sap/its/
in that double click on WEBGUI service
Then click on SERVICE DATA tab in WEBGUI service
in SERVICE DATA tab click on GUI CONFIGURATION & add parameter name and value over there
Save it , it will save the changes in new request
Thanks
Anil
Edited by: Anil Bhandary on Oct 16, 2009 10:23 AM

How to set the File Path to run a javascript using Plugin Code?

Hi All,
Im new to Indesign Plugin Development.Can any one help me out with my problem.
What i want to do is to run a javascript using Plugin Code.When i went through this forum i was able to find out that i should use the IscriptRunner Class to automate this.I could also figure out that the Member Function to use is "CanHandleFile" &"RunFile".
The first parameter in CanHandleFile & RunFile Member Function is to specify the path of the JavaScript File i suppose!I could also find out that IDFile has to used to set the file path Information.
But im clueless how to set the Javascript FilePath using IDFile.Can any one help me how to do this?Any Code Snippets Please?
Waiting for reply.
Thanks
myRiaz

Hi, Andreas Can you explain this in detail? I found it in your post before. The content of elements are returned through the Characters callback function: From ISaxContentHandler.h: /** Receives character data The parser will call this method to report each chunk of character data. SAX parsers may return all contiguous character data in a single chunk, or they may split it into several chunks. But all characters in any single event must come from the same external entity so the Locator provides useful information. Note some parsers will report whitespace using the IgnorableWhitespace() method rather than this one (validating parsers must do so). @param Chars The characters from the XML document. */ virtual void Characters(const PMString& chars) = 0; What i have done is implement my own SAXContentHandlerServiceBoss, and in my file XXXSAXContentHandler.cpp, I override the fonctions StartElement, EndElement, and Characters() like below: I add the PMString xmlData to collect the file content: class XXXSAXContentHandler : public CSAXContentHandler { void XXXSAXContentHandler::Characters(const WideString& chars) { xmlData.Append(chars); } void XXXSAXContentHandler::StartElement(const WideString& uri, const WideString& localname, const WideString& qname, ISAXAttributes* attrs) { xmlData.Append("<"); xmlData.Append(localname); xmlData.Append(">"); } void XXXSAXContentHandler::EndElement(const WideString& uri, const WideString& localname, const WideString& qname) { xmlData.Append("</"); xmlData.Append(localname); xmlData.Append(">"); } } and in my program, I use the code below to call the fonction I overrided, but I dont know how I can get the String xmlData I defined in the XXXSAXContentHandler.cpp InterfacePtr<IK2ServiceRegistry> serviceRegistry(gSession, UseDefaultIID()); InterfacePtr<IK2ServiceProvider> xmlProvider(serviceRegistry->QueryServiceProviderByClassID(kXMLParserService, kXMLParserServiceBoss)); InterfacePtr<ISAXServices> saxServices(xmlProvider, UseDefaultIID()); InterfacePtr<ISAXContentHandler> saxHandler(::CreateObject2<ISAXContentHandler>(kXXXSAXContentHandlerServiceBoss)); saxHandler->Register(saxServices); bool16 parseFailed = saxServices->ParseStream(readStream, saxHandler); Can you give me any help? Thanks and regards!

Where to set UserID and Password for NFS file share in Central File Adapter

Hi All,
Does anyone know if/where it is possible to set the userID and password if you want to connect to an NFS fileshare with the central XI30 file adapter?
Cheers,
Frank

Hi Frank,
The file adapter uses user ID SAPSERVICE... with the addition of the system ID of your SAP XI system. So if your system ID is EXD the user id which needs read/write access should be SAPSERVICEEXD.
Have fun

Set file association using GPP

Hi
I am trying to change the default application used to open a particular file type. I tried it on the person's Windows 7 computer (in an AD domain).
I have tried changing the default file association using Control Panel. However, the text and the tick box "Always use the selected program to open this kind of file" is greyed out. Also, when I browse and navigate to the .exe I want to be the
default program, after selecting it the new .exe is not added to the list.
I thought I'd use Group Policy Preferences instead. However, when I right click Folder Options under Control Panel Settings and choose 'Open With' it won't accept the path I specify because the application is not installed on the server on which I am
editing Group Policy. ????
Is there a way for me to set this, please?
Ideally, I would like to be able to edit the clients directly without the need to use GPP where an application is used just on one machine. But, it would also be useful to be able to set some global options without the need to edit every single person's
file associations.
If anyone knows how to make changing file associations from the client editable that would be great. I don't understand why it is greyed out - is this something I may have set in Group Policy and have forgotten about?
Thanks.

> right click Folder Options under Control Panel Settings and choose 'Open
> With' it won't accept the path I specify because the application is not
> installed on the server on which I am editing Group Policy. ????
Simply type the path, do not use the browse button :)
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Where to set parameter file to use in expdp

Similar Messages

Maybe you are looking for