Where used report

Dear Experts,
We are using CS15 to display the where used list for a single component . We want to see the where used report for some 1000 components at a stretch and hope there is no standard report for this . Please give us the relevant table where both the component and header material are stored together or tables relative to CS15.

Hi
These are the tables used in CS15
AENR Change Master
MARC Plant Data for Material
MC29M Material Master Record Table: BOMs - Group Data
MC29S Material Master Record Table: Bills of Material
MTCOM Material Master Communication
MTCOR Material Master View: Return Codes
RC29L BOM Display input/output table
T001W Plants/Branches
TC04 Applic-Specific Criteria for Alternative Determination
TCC08 Engineering Change Management: Control Data
TCS03 Modification Parameters/Defaults for BOMs
TCS41 Automatic alternative BOM determination
TCSPR User Profile for BOMs
TCSVL User defaults list display (variable lists)
USR02 Logon Data (Kernel-Side Use)
Thanks
S.Murali

Similar Messages

Where used report for output message routines

Hi folks,
we are running a multiclient ERP system and actually we are having many many output message routines created like RV61B961. Is there an easy way to figure out, if this routines are still in use? I need to reduce the amount.
Thanks for any help, Stefan

Hi,
You can get the routines which are in use, from table T683S.
T683S - KOBED will give you the routines in use against the procedure and application. You can download the list from each client and get the consolidated list.
Regards,
AKPT

Matl. where used list

Hi Frndz,
what is the t. code to see material where used report?
I want to see usage of matls in BOM,Routings, Pro.orders and also it's qty. in stock at a glance.
Thanks in advance,
Rohit.

Dear Rohit,
You can get the material where used for a single material using T Code CS15, and prepare a report to check the same for a
multiple list of materials using this FM,
CS_WHERE_USED_MAT or else CSEP_MAT_BOM_SELECT_WHERE_USED.
Regards
Mangalraj.S

Report name for services where used in task lists

plz let me know report name for services where used in task lists.

Hello Sairam,
I am abit confused. Are you looking for report to find where the task list is used ? You can find all the available reports in The menu path Logistics -> Production -> Master Data -> Routings -> Reporting.
If you want a specific one then please provide more details
Thanks
Amber

FSG using Report Manger - Where are the reports stored?

I am able to configure the FSG in GL, and use Report Manager to produce PDF/Excel output.
Where are these reports physically stored? Are they in a database or in a file system? If so, what is the location?
Thanks.

hi,
Starting 11i, the reports are stored in table FND_LOBS and some relevant Entries are made in the FND_DOCUMENTS_TL table.
The packages used for storing and retrieving the reports are FND_DOCUMENTS_PKG and ADI_DISPLAY_REPORT.
RG_REPORT_REQUEST_LOBS stores the XML output associated with each Financial Statement Generator request that is run in XML mode.
The XML output is used for drilldown purposes.
For further Information on Report Manager see also:
(Doc ID 726774.1) - Report Manager - Master Note
(Doc ID 858505.1) - Report Manager Troubleshooting
(Doc ID 726958.1) - Report Manager (FRM) List of Patches
best regards, Martin

ABAP Function Module where-used in BI-Transformations

Hi,
we have developed some ABAP-Z-Function-Modules. These are used in several BI-Data-Transformations and work fine and performant.
The problem we have now is to find out in which transformation a Function-Module is used.
The where-used-list in SE37 doesn't report any BI-Transformations althought I check all categories.
Got anyone a solution for our problem?
Christian

Hi,
see this code for function module where used list only for transformation . i used the same code as bhaskar specified..but little modification..here u used "date_get_week" function module..
TYPE-POOLS slis.
DATA fcat1 TYPE slis_t_fieldcat_alv.
DATA: BEGIN OF t_display OCCURS 0,
         targetname LIKE rstran-targetname,
         sourcename LIKE rstran-sourcename,
         tranid LIKE rstran-tranid,
         routine LIKE rstran-startroutine,
         line_no LIKE rsaabap-line_no,
         line LIKE rsaabap-line,
END OF t_display.
data : input(75) type c.
DATA : input_pattern1(75) TYPE c.
DATA : input_pattern2(75) TYPE c.
DATA : same_source(30) TYPE c.
**Internal table declerations**************************************
TYPES: BEGIN OF t_trans_lookup_finder,
         targetname TYPE rstran-targetname,
         sourcename TYPE rstran-sourcename,
         tranid TYPE rstran-tranid,
         routine TYPE rstran-startroutine,
         line_no TYPE rsaabap-line_no,
         line TYPE rsaabap-line,
END OF t_trans_lookup_finder.
DATA: i_lookup_finder TYPE STANDARD TABLE OF t_trans_lookup_finder,
wa_lookup_finder TYPE t_trans_lookup_finder,
i_trans_lookup_finder TYPE STANDARD TABLE OF t_trans_lookup_finder,
wa_trans_lookup_finder TYPE t_trans_lookup_finder,
i_trans_final TYPE STANDARD TABLE OF t_trans_lookup_finder,
wa_trans_final TYPE t_trans_lookup_finder.
DATA : i(7) TYPE n.
DATA old_cube(20) TYPE c VALUE ' '.
DATA old_source(20) TYPE c VALUE ' '.
**Selections for update rules**************************************
SELECT DISTINCT targetname    sourcename tranid        endroutine       line_no       line
       INTO TABLE i_trans_lookup_finder FROM
       rstran AS a INNER JOIN rsaabap AS b ON aendroutine = bcodeid
                       WHERE
                       aobjvers = 'A' AND bobjvers = 'A'.
APPEND LINES OF i_trans_lookup_finder TO i_lookup_finder.
**Selections for Transformations(Expert routine)*******************
SELECT DISTINCT        targetname       sourcename       tranid       expert       line_no       line
       INTO TABLE i_trans_lookup_finder FROM
       rstran AS a INNER JOIN rsaabap AS b ON aexpert = bcodeid
                       WHERE
                       aobjvers = 'A' AND bobjvers = 'A'.
APPEND LINES OF i_trans_lookup_finder TO i_lookup_finder.
Edited by: Sakthi Jaganathan on May 20, 2009 6:25 PM

How to Display 'purchase order text' in MM03 using report program

Hi Friends,
Can anybody suggest me how to display 'purchase order text' in MM03 using report program.
'Purchase order text' tab displays purchase long text of particular material .
I coded as:
      SET PARAMETER ID 'MXX' FIELD 'E'.
      SET PARAMETER ID 'MAT' FIELD k_final-matnr.
      SET PARAMETER ID 'WRK' FIELD k_final-werks.
      CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
It displays Purchasing tab other than Purchase Order Text tab of MM03.
Please suggest me how can i solve this.
Is there any parameter id to set values for Purchase Order text tab

>
Madhu Mano Chitra wrote:
> I want how to navigate to MM03 'Purchase Order text' tab/ view using ABAP code.
> could any suggest me
You can call a transaction and pass it a BDC table that tells it where you want it to go. You have to work out for yourself what to put into the BDC table. The code below works for tcode CATSSHOW.
DATA: bdcdata_wa TYPE bdcdata,
      bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
   CLEAR bdcdata_wa.
    bdcdata_wa-program = 'CATSSHOW'.
    bdcdata_wa-dynpro   = '1000'.
    bdcdata_wa-dynbegin = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'SO_STATU-LOW'.
    bdcdata_wa-fval = '20'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'ANDZEIT'.
    bdcdata_wa-fval = SPACE.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'PAST'.
    bdcdata_wa-fval = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    IF p_selscr = SPACE.
       CLEAR bdcdata_wa.
       bdcdata_wa-fnam = 'BDC_OKCODE'.
       bdcdata_wa-fval = '=ONLI'.
       APPEND bdcdata_wa TO bdcdata_tab.
    ENDIF.
    opt-dismode = 'E'.
    opt-defsize = 'X'.
CALL TRANSACTION 'CAPP' USING bdcdata_tab OPTIONS FROM opt.

How to find report values using report writer

hi,
Please help me.
How to find report values using report writer
Regards,
RRK.
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 12:01 PM

Thanks all for the reply.
I am trying to solve a problem where report parameter value that is set at Management Console is wiped out after calling replaceConnection.
databaseController.replaceConnection(oldConnectionInfo, newConnectionInfo,
null,DBOptions._doNotVerifyDB);
We have to support changing database connection from a java utility
class. But once replaceConnection is called all existing static parameter values are lost. To fix this issue we thought of getting parameters and values before calling replaceConnection and setting it after replaceConnection.
Version is CS2008 SP3 - version 12.3.0.601
If there is any other option of fixing the original wipe out issue?
ParameterValues.getValues() didn't return value. I will try ParameterValues.getCurrentCalues() but the document says ParameterValues.getValues() is equivalent to the IParameterField.getCurrentValues() method unless it is empty, in which case it is equivalent to the IParameterField.getDefaultValues() method.
So getCurrentValues() may not work.

Table name for BW Query Where used list

Hi,
I am looking for Table name where the information of " where used list " of a BW query stores.
Any help ?
Thanks
Satya

Vani,
I dont think it is available...
whats your exact requirement???
you can make use of these below tables
RSZELTDIR              Directory of the reporting component elements
RSZELTTXT      Texts of reporting component elements
RSZELTXREF      Directory of query element references
RSRREPDIR             Directory of all reports (Query GENUNIID)
RSZCOMPDIR      Directory of reporting components
RSZRANGE      Selection specification for an element
RSZSELECT             Selection properties of an element
RSZELTDIR              Directory of the reporting component elements
RSZCOMPIC            Assignment reuseable component <-> InfoCube
RSZELTPRIO      Priorities with element collisions
RSZELTPROP      Element properties (settings)
RSZELTATTR      Attribute selection per dimension element
RSZCALC                    Definition of a formula element
RSZCEL                 Query Designer: Directory of Cells
RSZGLOBV            Global Variables in Reporting

Using Report Builder to make Letters

I am trying to use report builder to create templates for
letters and other multi-page documents, the query automatically
inserts data from a database (the price of something for example).
Whenever I try to fit the document in report builder it says
something like "Report compilation error. Report design not valid :
1. The title section, the page and column headers and footers and
the margins do not fit the page height. " Is there any way to get
this text to automaticaly go to the next page instead of just
giving me an error? A better way to do this would also be great (I
have templates in .rtf format with bookmarks where query objects
go)

Hi Rajan,
Reporting Services provides two report authoring tools: Report Builder and Report Designer in BIDS/SSDT. Whether you can design an Ad-hoc report based on Web Service data source depends on the version of the Report Builder. In Report Builder 1.0, we can
only use report model to design a report. In Report Builder 2.0 or higher, we can use the built-in XML data source type that can retrieve data from Web service to design a report.
The Report Builder 1.0 is available in SSRS 2005. For SSRS 2008, we can upgrade the Report Builder to Report Builder 2.0 by installing the SQL Server 2008 PCU1. For SSRS 2008 R2 or SSRS 2012, the Report Builder 3.0 is included natively.
References:
Creating Report Datasets from XML Data (Report Builder 2.0)
Reporting Services: Using XML and Web Service Data Sources
Note: The second link is for Report Designer in SSRS 2005 and also applies to Report Builder 2.0 or higher.
Regards,
Mike Yin
TechNet Community Support

Where used in web templates for parameter groups

Does SAP deliver any where used functionality for parameter groups? I need a report or function that can take as input a parameter group (fully qualified) and deliver back all the web layouts and planning folders that the parameter group (or for that matter global planning sequence) is used.
I can find the XML of the web templates but that is a bear to parse and have not found the tables that show the details of planning folders (if any).

Hello Corwin,
we don't have a where-used functionality but in SAP NetWeaver 2004s you can use programs UPC_CUSTOMIZING (for BPS0), UPB_CUSTOMIZING (for folders) and UPWB_CUSTOMIZING (for web interfaces) to display and search through the configuration. It's one folder or web interface at a time but it's certainly quicker than doing it manually.
Regards,
Marc
SAP NetWeaver RIG

Help With Where Used Query

Hi Folks,
i am trying to write a where Used Query for the child items.
SELECT ITT1.Father 'Item Code',BOM= Case OITT.Treetype When 'S' then 'Sales BOM' Else 'Production BOM' End FROM OITT INNER JOIN ITT1 ON OITT.Code = ITT1.Father INNER JOIN OITM ON ITT1.Code = OITM.ItemCode where OITM.ItemCode=$[$5.0.0]
Everything works fine but when i am trying to bring back the item description in the report it brings the description of the Child item instead of the Parent. So i am looking for a query which will show the parent item, description and bom type for the child item.

Hi,
Try this one:
SELECT T1.Father 'Item Code',BOM= Case T0.Treetype When 'S' then 'Sales BOM' Else 'Production BOM' End, T3.ItemName, T1.Code
FROM OITT T0 INNER JOIN T1 T1 ON T0.Code = T1.Father
INNER JOIN OITM T2 ON T1.Code = T2.ItemCode
INNER JOIN OITM T3 ON T0.Code = T3.ItemCode
where T2.ItemCode=$[$5.0.0\]
Thanks,
Gordon

Function Module where-used list does not find update rule programs

We have function modules called in update rules. The where-used list in the function builder does not find the update rule programs.
For example, function DATE_GET_WEEK is called in an update rule to InfoCube YCUBE001. The activated program name for this update rule is GP3PWI6PKM5Y3K75A370DIS8I77. When I goto SE37, enter the function DATE_GET_WEEK, click the where-used button, check the programs option and search. The system does not find the program GP3PWI6PKM5Y3K75A370DIS8I77.
Without this search capability it is difficult to do an impact analysis of changing function modules. Does anyone know of a solution?

hi,
i think the reason is the code of update rules' generated program are stored line by line in table(rsaabap), update rules program itself stored in table rsupdrout, link with field codeid, another useful table is rsupdinfo which store infocube, infosource related. other info may stored in some other rs* and rsa* tables.
try to create following program in your system, and run, type in the function module name, and will display out the update rules program id, with additional useful info : which infoprovider, infosource, and detail info of the routine and infoobject in the update rule that using that function module. you may modify the program to have better display out list.
hope this helps.
REPORT Z_FM_UPDRUL_WHEREUSED.
data : lv_sfm,
       lv_line type string,
       lv_where type string.
tables : rsaabap,RSUPDROUT,rsupdinfo.
select-options:
s_fm for rsaabap-LINE.
start-of-selection.
loop at s_fm.
    concatenate s_fm-low ' ' into lv_sfm.
    concatenate '%' s_fm-low into lv_line.
    concatenate lv_line '%' into lv_line.
    write : / 'function module', 'update rule id', 'routine id', 'infoobject', 'infocube', 'infosource'.
    select * from rsaabap
    where line like lv_line and objvers = 'A'.
       select * from rsupdrout
       where codeid = rsaabap-codeid and objvers = 'A'.
         select single * from rsupdinfo
         where updid = rsupdrout-updid and objvers = 'A'.
           write: / lv_sfm, rsupdrout-updid, rsaabap-codeid,
                    rsupdrout-iciobjnm, rsupdinfo-infocube,
                    rsupdinfo-isource.
    endselect.
    endselect.
endloop.

Function Module to do "Where-used-list"

Dear sirs,
Please could anyone help me? I'd like to know if there is any FM which I can pass the name of an abap object (program, include, table, function module, etc) and returns the where used list of it in an internal table.
I need to map all transactions that call a report or are using an include.
Thank you in advance,
Fabio Purcino

You can use the Function Module
RS_EU_CROSSREF
Read the Documentation of the same.
there is one example.

Function Module to identify Where-Used list

Hi All,
Is any one aware of any Function Module(s) to identify where-used list of any given Info Object(s).
I would like to use this in an ABAP Report.
I do not want to use RSD1/metadata repository way.
I was thinking of a way to write multiple selects on the various tables (RSZELTTXT, RSZELTDIR, RSZSELECT...) to get ELTUID/TELTUID/SELTUID..., but that seems to get very lengthy.
Have already checked a few posts but they only indicate the queries/Cubes in which a given IO is used, where as I am interested in all BW objects where a given IO is used.
Thanks in advance,
Sanny.

hi Sanny2 ,
try this method... this will surely help
if you want to know how where used list works then follow the steps.
1 ) open tcode se11
2) enter table name (example...MARA)
3) go to command window (where you often use to enter tcode ... Enter Tcode /h - which is debug switch on)
4) select any field (example .. MATNR)
5) press where used list button.
6) you can navigate to source code (debugger mode)
7 ) follow steps and trace the code HOW WHERE USED WORK,
hope this helps
let me know if useful
Avirat

Where used report

Similar Messages

Maybe you are looking for