Which app will read the square information codes?

which app will read the square information codes?

Search the playstore for QR code reader - here are a few:
QR Code Reader - Android Apps on Google Play
QR Code Scan & Barcode Scanner - Android Apps on Google Play
QR Code Scan & Barcode Scanner - Android Apps on Google Play

Similar Messages

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

Itunes provides the option for setting the Start and Stop times of each music track. However, the start and stop times do not synchronize to the iPhone. I don't understand why this option is even available as it doesn't work when listening to music on the phone. I have not found another application that will support the start and stop time markets. I have searched quite a bit for this but can't find anything. I hope we can find something.

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

Hotmail is having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

Which server will get the load?

Hi all
I have 2 servers, on 'server1', I have an flv file, on
'server2', I have an swf file.
The swf file on server2 loads the flv file on server1. My
question is, which server will get the burden of the load of the
flv file? Additionally, how can I test this to confirm this (bare
in mind, I'm not a server guy).
Any help is always appreciated.
Thanks
Chris

You can basically publish it to one Origin Server and that server will republish the incoming stream to other 3 origin servers. This feature is called Multi-point publish. Basically you use application.onPublish and onUnpublish handlers in conjunction with Server-side NetStream Class to achieve this.
Simple example:
var nc;
var ns;
application.onAppStart = function(){
      nc = new NetConnection();
     nc.onStatus = function(info){
          // you can trace connection status here
     nc.connect("rtmp://Origin_Server_2/myApp");
application.onPublish = function(myClient,myStream){
    ns = new NetStream(nc);
    ns.attach(myStream);
    ns.publish(myStream.name,"live");
application.onUnpublish = function(myClient,myStream){
      ns.publish(false);

Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. HELP!!

Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. I know that the folders that have the problem were not transferred to the hard drive via a photo transfer application (I have a Canon camera) but I simply copied them out of the photo card and onto my old PC.
Is there some way I can open these pictures on my Mac? They work fine on a PC.

Thanks for your reply.
The files don't open in preview either. In preview I get the error message 'The file "xxxx_xxx.jpg" could not be opened. It may be damaged or use a file format that Preview doesn't recognize'. The folders with these un-openable pictures do not even get imported into iPhoto. When I try to import them I get an error message about the files being unreadable.
The color profile information on the un-openable files is not visible but I see that all the other files from my old drive are RGB.

In Which table Will maintain the All Workflows Triggering Event Details?

Hi,
Can Any one tell me
In Which table Will maintain the All Workflows Triggering Event Details?

Hi Mohit,
The Tr Codes KE29N/KE28L will give me the Logs of Past TDD runs. However, i would like to see the all the variants in a go. Due to a Organizational change, there is a new characteristics introduced. Now we need to change the sequence of the TDD runs. Since there are lot of TDD Variants that are in use. we need to get all of them into an excel and then decide the necessary changes.
Thanks & Regards
Surya

Read the good information from a record

Hello all,
I save in a record (RMS) following infomation:
id - int
webid - int
del - int
name - string
if I want read the name directly do I need to read all previous information (id, webid, del)? Do you know a way to read directly the name without reading the other information?
Now my code is like :
try {
               RecordStore rs = RecordStore.openRecordStore(Produit.DB_PROD,true);
               RecordEnumeration re = rs.enumerateRecords(new ObjShopperFilter(), new ObjShopperComparator(), true);
             while (re.hasNextElement()){
                  ByteArrayInputStream stream = new ByteArrayInputStream(re.nextRecord());
                  DataInputStream reader = new DataInputStream(stream);
                  try {
                       reader.readInt();
                      reader.readInt();
                      reader.readInt();
                      String name = reader.readUTF();
                     reader.readLong();
                      if (reader.readInt()==id){
                           reader.reset();
                           stream.reset();
                           rs.closeRecordStore();
                           return name;
                  catch (IOException e) {
                       //debug
                      System.out.println("IOException in Category.isUsed:002:" + e + ":" + e.getMessage());
                  finally{
          catch (RecordStoreException rse){
              System.out.println("RecordStoreException in Category.isUsed:001:" + rse + ":" + rse.getMessage());
          Could you help me ?
Regards

I think that my explanation wasn't good :(
I don't want to find a special record...I want read a special part of a record.
When I save a record I write in bytes values in int, string, double...(ex.: 1,"john",2.3).
So my RMS contains some same records, for example
1,"john",2.3
2,"rose",3.4
3,"Louis",3.0
When I read all my records, I would like retrieve directly the String "john","rose"...
My solution is to read each component of a record without save the read value (see my previous code...) until read the element that I want keep the value.
Is it possible to read directly a part of a record?
I hope that these explanation could help you to understand my needs.
Regards

Any way to find out which apps I use the most?

Sometimes there are apps that I don't realize I use a lot. Is there any way to find out which apps I use the most, so I can put those on my first home screen?

I'd keep and eye on your multitask bar. This tells me what apps I use and often forget I've been in that day.

I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. be

I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. because of a slow connection

If you are getting emails from these forums then you probably accidentally clicked on one of the links on the forums page where all the questions are listed e.g. at the top right of each forum's page there is text box with Actions and Notifications in :
So far you've posted in the iTunes Store forum :
https://discussions.apple.com/community/itunes/itunes_store#/
And the Using iPad forum :
https://discussions.apple.com/community/ipad/using_ipad#/
If on either of those forums that box says 'stop email notifications' instead of 'receive' then click on it and it should stop that forum sending emails to you.
There are full instructions on this page for stopping emails, as there are other places where they might have been set 'on' : https://discussions.apple.com/docs/DOC-3661
This is your original post for iTunes Match : https://discussions.apple.com/message/22647293#22647293
And this page lists your posts (you can click on each post on it to be taken to it's thread) : https://discussions.apple.com/people/suzettemg?view=overview

TS1424 I purchased and downloaded a book in iBooks. I read about 16 chapters. The next time I opened the app to read the book, no words loaded on the pages. It would go to the table of contents, but not to pages in chapters. Any ideas?

I purchased and downloaded a book in iBooks. I read about 16 chapters. The next time I opened the app to read the book, no words loaded on the pages. It would go to the table of contents, but not to pages in chapters. Any ideas?

Try to reset your phone, hold the home/sleep buttons until it reboots and the apple logo appears, don't release the buttons till apple logo appears. If no luck there, Resync the book. Or delete it and redownload it. Downloading past purchases from the App Store, iBookstore, and iTunes Store

Which table will give the completion timestamp of the last success run?

Which table will give the completion date timestamp of the last successful execution of an OWB Mapping or Process_flow.?
I was thinking of using
select max(RTA_LOAD_DATE|| RTA_LOAD_TIME) from OWBSYS.OWB$WB_RT_AUDIT
where
trim(RTA_LOB_NAME) like '%EMP_LOAD1%'
and
rta_status = '1'
But the RTA_LOAD_DATE AND RTA_LOAD_TIME is null
and RTA_STATUS column is having the value 1 irrespective of whether the JOB has completed or abended
Please advise??

Check with these tables :
<b>coss
cosl
cosp</b>
aufk
qmat

How can I check to see if there is money left on an iTunes card if I can't read the scratch off code?

How can I check to see if there is money left on an iTunes gift card if I can't read the scratch off code?

Sorry, but other than trying to redeem the card there's no way to check whether it is still valid or was previously redeemed.
Regards.

How to read the html source code of a webpage.

How can I read the html source code of a webpage with a java application?
Is there a good idea?

>
How can I read the html source code of a webpage
with a java application?
Is there a good idea?
I don't know if this is a good idea, but it works.
1) Use a URL to obtain the document's location
2) Use a URLConnection to open a connection between your computer and the
document server
3) Connect to the server
4) Get the InputStream of said connection
5) Associate the Input Stream with a Buffered Input Stream
At this point you can use a loop to read lines from the BufferedInput Stream and append them to a TextArea or other suitable text component.

In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

Did you set any restriction?
Settings>General>Restriction

Which app will read the square information codes?

Similar Messages

Maybe you are looking for