Which control file does RMAN use?

On March 1, full backup along with control file was taken
On March 3, full backup along with control file was taken
On March 5, there is a media failure (some datafile is corrupt, but control file is intact).
So, RMAN restores March 3 full back up, and applies archived logs. But my question is: which controlfile does it use? The one on march 3? The one on march 5? Or Both?

The first choice is always the actual,current controlfile. Backed up controlfiles are only used, when all current controlfiles are lost.
Werner

Similar Messages

The master site control file does not contain a component item for SMS_STATUS_MANAGER.

New to the System Center world. We are using a fresh install of Server 2012 R2 and System Center R2 with everything working until Server 2012 R2 Update 1 was installed. Now we are getting the following:
Site type: Primary Site or CAS SMS_STATUS_MANAGER
6/4/2014 1:35:21 PM 10996 (0x2AF4)
Resolved the "Status Manager" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Resolved the "Site Control Manager (Master Site Control File)" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Parsed the master site control file, serial number 1551209029.
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
This site is the central site. SMS_STATUS_MANAGER
6/4/2014 1:35:21 PM 10996 (0x2AF4)
ERROR: The master site control file does not contain a component item for SMS_STATUS_MANAGER.
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Sleeping for 60 seconds... SMS_STATUS_MANAGER
6/4/2014 1:35:21 PM 10996 (0x2AF4)
Any thoughts on how to fix this? Seen a few references to a "site reset" for SCCM 2007 but wanted to make sure there wasn't anything else to try before heading down that road with 2012R2.

A site reset can also be done in CM12 so it's worth a try.
Torsten Meringer | http://www.mssccmfaq.de

Which jar file should i use ??

Hi,
Which jar file should i use to import the following:
import org.apache.commons.lang.exception.NestableRuntimeExceptionI am getting package does not exist error.
Please help.
Thanks !

one of the apache commons Jar files... make sure they're in your classpath.

"dtutil", how to tell which configuration file for packages using after deployment?

Hello All,
Trying to achieve this feature,
Using DOS command to automatic my deployment process--glad I found dtutil. However, it doesnt give you any chance to identify which configuration file to be used by SSIS packages after deployment.
Deployment Method: file deployment
Configuration sued: XML file and SQL Table. IN XML file, it tells which DB connection for packages to look up the configuration table.
Who can share some thoughts on this?
Derek

It is NOT about sequence.
It is about how to point which configuration file to be used by deployed packages as during the "dtutil.exe"
deployment, you dont have chance to identify which physical location confg files to be used.
Derek
That you do only at the time of execution of packages. By default it uses configuration settings created at design time within the package. If you want to override it, you can use \Configfile switch of dtexec for that. You can also set explicit values for
properties using /SET switch
http://technet.microsoft.com/en-us/library/ms162810(v=sql.105).aspx
See this to understand how configs are applied in runtime
http://technet.microsoft.com/en-us/library/ms141682(v=sql.105).aspx
and this to understand behaviour difference in ssis 2008
http://technet.microsoft.com/en-us/library/bb500430(v=sql.105).aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Bursting control :DocumentProcessor does not use translation while bursting

Hi
We are trying to use the bursting feature in BI Publisher using the DocumentProcessor class/APIs.
The java code is :
import oracle.apps.xdo.batch.DocumentProcessor;
public class BurstingTest
public BurstingTest()
     try {
          DocumentProcessor dp = new DocumentProcessor ("bursting_cntl.xml", "test.xml","temp");
          dp.process();
catch (Exception e) {
System.out.println(e);
public static void main(String[] args)
BurstingTest burst1 = new BurstingTest();
The bursting control file is :
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/XXG_ACCOUNTING_CNDN_REPORT/G_Cust">
<xapi:delivery>
<xapi:filesystem id="file1" output="C:\Projects\XDO\RTF_TO_PDF\output\${cust_name}.pdf"/>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="file1">
<xapi:template type="rtf" locale="fr-FR" location="C:\Projects\XDO\RTF_TO_PDF\test.rtf"
translation="C:\Projects\XDO\RTF_TO_PDF\test_fr_FR.xlf" >
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
The XLF file has the necessary translations. Source en-US and target fr-FR.
However, I see that the translations are NOT being picked by the DocumentProcessor. The bursting does happen successfully, however I don't see the translations in the PDF.*
Am I missing something here? Probably some flag that I need to set or something of the kind?
A section of the XLF file is as shown below :
<?xml version = '1.0' encoding = 'utf-8'?>
<xliff version="1.0">
<file source-language="en-US" target-language="fr-FR" datatype="XDO" original="orphan.xlf" product-version="orphan.xlf" product-name="">
<header>
<prop-group name="ora_reconstruction">
<prop prop-type="extractorVersion">5.6.3_120.1</prop>
</prop-group>
</header>
<body>
<trans-unit id="5dacac6a" maxbytes="4000" maxwidth="56" size-unit="char" translate="yes">
<source>Please confirm the above information.</source>
<target>Merci pour confirmer l'information mentionee</target>
<note>Text located: body</note>
</trans-unit>
<trans-unit id="366403c2" maxbytes="4000" maxwidth="23" size-unit="char" translate="yes">
<source>Dear [&0],</source>
<target>Cher [&0],</target>
<note>Text located: body</note>
</trans-unit>
<trans-unit id="ce145901" maxbytes="4000" maxwidth="23" size-unit="char" translate="yes">
<source>Invoice Date</source>
<target>Date de la facture</target>
<note>Text located: body/table/table header</note>
</trans-unit>
Request you to revert as soon as you could.
Thanks and Regs
Krish
Edited by: user11131627 on Nov 8, 2009 10:16 PM

Ike
Yes, I believe the translation element is defined.
Referred to this post about that :
http://blogs.oracle.com/BIDeveloper/2009/06/bursting_translation.html
Also, we did try using the translation element thru' Apps and submitted as a standard concurrent program.
The translation fie was used correctly.
My question is :
How do I force the usage thru' my custom Java program and in which I use DocumentProcessor?

Control file and Rman

Hello,
I have 2 disctinct servers.
oracle 10gr2 in each one with the same linux red hat 4 version.
the second server is just to TEST if the backup create with the first one, works fine.
So the install in each server is exactlly the same...
same files, same path etc.
Scenario:
1 from srv one I execute a full backup with RMAN
2 I copy the file in server 2
3 I move a datafile in order to create an error
4 I test : restore database in server 2...
I get the followin error:
RMAN-03002: failure of restore command at 02/24/2008 21:15:37
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 8 found to restore
and this command return no result:
RMAN> list backupset;
RMAN>
the file created with server 1 have been copied in the declared path into server 2...
I have execute a crosscheck backup too
RMAN> crosscheck backup;
using channel ORA_DISK_1
RMAN>
Must I copy the controle file too? in this case will I have an inconsistent error?
Thanks to help
Cheers

You must have
controlfile autobackup on
(If you don't change the format it will be in $ORACLE_HOME/dbs, and the format will be c-<database id>-<yyyymmdd>_<piece>.ctl).
You must copy that file, as it has information about your most recent backup, the backup you just made.
Hth
Sybrand Bakker
Senior Oracle DBA

No autobackup of control file for rman

This is what I used for a backup of database. I do not have controlfile autobackup set, I back it up using rman commands. Backup is made to a third party media manager.
I tried to restore and it cannot startup mount the database, it can only nomount the database. I am assumming this is because it cannot find the control file.
Is it possible to recover the controlfile if autobackup not on ? I did make a backup current controlfile with the rman script below .. Is it possible to get back the database at all ..
SQL> Connected to an idle instance.
SQL> ORACLE instance started.
Total System Global Area 1286066176 bytes
Fixed Size 2221160 bytes
Variable Size 805309336 bytes
Database Buffers 469762048 bytes
Redo Buffers 8773632 bytes
ORA-00205: error in identifying control file, check alert log for more info
This is the backup script.
rman target xxx/xxx nocatalog << eof
run {
allocate channel t1 type 'sbt_tape' parms
'ENV=(tdpo_optfile=xxxxxxxxxxxx)';
backup as compressed backupset database plus archivelog delete input;
release channel t1;
quit
eof
rman target xxxx/xxxx nocatalog << eof
run {
allocate channel t1 type 'sbt_tape' parms
'ENV=(tdpo_optfile=xxxxxxxxxxxxx)';
backup current controlfile;
release channel t1;
quit
eof
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default

joecbc wrote:
I did find this in my ORACLE_HOME .. I was able to do the resrore controlfile command as below .. Not certain how the file named control02.ctl got there, maybe from my backup I did yesterday .. anyway the database is restored, thanks.
RMAN> restore controlfile from '$ORACLE_HOME/fast_recovery_area/RMANT/control02.ctl';
Starting restore at 05-OCT-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=212 device type=DISK
channel ORA_DISK_1: copied control file copy
output file name=/data99/oradata/RMANT/control01.ctl
output file name=/u11/app/oracle/fast_recovery_area/RMANT/control02.ctl
Finished restore at 05-OCT-12You have mutiplexed controlfile in two different location:
/data99/oradata/RMANT
/u11/app/oracle/fast_recovery_area/RMANT
This controlfile "control02.ctl" was your current controlfile, you have controlfile in two different location "/data99/oradata/RMANT" and "/u11/app/oracle/fast_recovery_area/RMANT"
So, be aware you have lost only this file "/data99/oradata/RMANT/control01.ctl" and the "control02.ctl" file is not a backup of controlfile, but is your current controlfile.
You restored control01.ctl from control02.ctl
Check it using command above
sqlplus / as sysdba
Select name, status from v$controlfile.
or
show parameter controlEdited by: Levi Pereira on Oct 5, 2012 1:05 PM

Problems creating control file in RMAN duplicate database

There is so much detail involved in this operation that I don't know what might be useful, so I'll start simple. I'm attempting to clone a database on the same host using RMAN "duplicate database". I finally got all the setup done, the OS authentication hurdles hurdled, etc. and entered the command:
duplicate target database to COPYCH2M until time "to_date('March 15 2012 12:00:00', 'Mon DD YYYY HH24:MI:SS')";
The first time I got:
ORA-19504: failed to create file "/u01/app/oracle/oradata/COPYCH2M/control01.ctl"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
There was nothing in the Oracle instructions about manually creating the directory, but I did so, thinking that might be the problem. And it created the control files! But then I got the following:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/21/2012 15:59:25
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version 11.1.0.1.0
ORA-00202: control file: '/u01/app/oracle/oradata/COPYCH2M/control01.ctl'
Sounds straightforward, if frustrating, right? Apparently you can't duplicate a database that's not in the exact same version. But:
1) The backuppiece we got the control file from was from last November.
2) The version of Oracle has not been updated since that time.
How can a file created by this version be incompatible with this version? Where is it even getting 11.1?
Thanks, I'm hoping this is easy but I can post more info if needed.

>
There was nothing in the Oracle instructions about manually creating the directory, but I did so, thinking that might be the problem. And it created the control files! But then I got the following:
>
The database is limited as to what it can create. Since you defined where you wanted the controlfiles to go (pfile/spfile), it's up to you to make sure the directory is valid and exists. :)
>
How can a file created by this version be incompatible with this version? Where is it even getting 11.1?
>
As for your controlfiles, make sure the compatible parameter is set the same on both the source and the target unless you are using the default (11.1.0.1 for you, and you aren't)
Keep going, you'll get there. RMAN duplicate is a great feature.
Good luck.

In which header file does BOOL type defined

All,
Can anyone tell in which system header file does 'BOOL' type got #define'd or typedef'ed.
Because i get the following error, while doing a make.
parse error before 'BOOL'.
Regards,
venkat

Hi There,
The C language is case sensitive,
so if you are looking for the definition, you need to use lowercase bool or uppercase BOOLEAN
type.
The best way to search is
cd /usr/include or /usr/include/sys
and grep for the word pattern. These are
the standard header files.
eg. grep BOOL /usr/include/*.h
If you use grep -i BOOL /usr/include/*.h,
this will ignore the case and prints everything that
it finds that matches BOOL.
...jagruti
Developers Technical Support
Sun Microsystems, http://www.sun.com/developers/support

From control file to RMAN catalogue

Dear buddies,
Right now my RMAN backup runs using the control file. How could I change it to catalogue?
Please guide me.
Thanks in advance.

If you already created the catalog then register the database in that catalog as
RMAN> register database ;
If you have not created the catalog then create the catalog and register your database below link help you
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmcatdb.htm
--neeraj.

Which XSLT Processor does CF8 use?

I'm writing some XSLTs and would like to use the fn:base-uri() that is accessible in Saxon-SA 9.1.0.7 or later editions. I cannot find any documentation on which XSLT processor(s) CF8 uses. Nor can I find anything on possibly upgrading it or using CF to access an external processor. Can anyone point me in the right direction on how to do upgrade CF8's XSLT processor, use another one via CF or even another function that the fn:base-uri() can do.
What I'm trying to do with the function is to get the XML's file name so that I can parse it out and insert it into the transformed XML.
EXAMPLE XSLT:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:xs="http://www.w3.org/2001/XMLSchema" exclude-result-prefixes="xs" version="2.0">
    <xsl:output method="xml"/>
    <xsl:variable name="filepath">
        <xsl:value-of select="base-uri()"/>
    </xsl:variable>
     <xsl:template match="/">
          <xsl:value-of select="$filepath"/>
     </xsl:template>
</xsl:stylesheet>

Probably most of the heavy consumption is PGA related.
http://docs.oracle.com/cd/B28359_01/server.111/b28274/memory.htm#i49320
Have a look at the AWR history views concerning memory consumption. ADDM, ASH, AWR etc should give you more insight. See also the awr/addm/ash/-rpt.sql scripts in $ORACLE_HOME/rdbms/admin on the database server. You (officially) would need Diagnostic en Tuning pack licenses though, so be warned (even for "touching" those views). Probably the heavy consumption of memory is or (wrong) storage related or inefficient code...

Which jar files should I use for XSLT?

I'm trying to do one of the examples from the Java/XML tutorial on this site. I can't get it to work. I started with the JAXP jar file and couldn't compile because it couldn't find one of the classes it needed. I then added the XALAN jar file to my CLASSPATH and got a clean compile but it crashes when I try to create the tranformer from the factory. It gives an error that says something like the SAX parser doesn't support the namespace. I tried various iterations of this. Could someone please tell me which jar files to include and in what sequence?
Thanx,
Cliff

I have the Xerces jar followed by the Xalan jar.
I get the following error:
C:\JBUILDER4\JDK1.3\bin\javaw -classic -classpath "C:\JBuilder4\projects\ProjectXML\classes;C:\Java\lib\xerces.jar;C:\Java\lib\xalan.jar;C:\JBUILDER4\JDK1.3\demo\jfc\Java2D\Java2Demo.jar;C:\JBUILDER4\JDK1.3\jre\lib\i18n.jar;C:\JBUILDER4\JDK1.3\jre\lib\jaws.jar;C:\JBUILDER4\JDK1.3\jre\lib\rt.jar;C:\JBUILDER4\JDK1.3\jre\lib\sunrsasign.jar;C:\JBUILDER4\JDK1.3\lib\dt.jar;C:\JBUILDER4\JDK1.3\lib\tools.jar" -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_shmem,address=javadebug,suspend=y com.craig.xml.util.Stylizer C:\JBuilder4\projects\ProjectXML\DataAreaDescTemplate.xsl C:\JBuilder4\projects\ProjectXML\DataAreas.xml
javax.xml.parsers.FactoryConfigurationError: java.lang.ClassNotFoundException: org.apache.crimson.jaxp.DocumentBuilderFactoryImpl
     at javax.xml.parsers.DocumentBuilderFactory.newInstance(DocumentBuilderFactory.java:149)
     at com.craig.xml.util.Stylizer.main(Stylizer.java:47)
Exception in thread "main"
This is my code:
package com.craig.xml.util;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.FactoryConfigurationError;
import javax.xml.parsers.ParserConfigurationException;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import org.w3c.dom.Document;
import org.w3c.dom.DOMException;
// For write operation
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamSource;
import javax.xml.transform.stream.StreamResult;
import java.io.*;
* Title:        ProjectXML
* Description: Test Project for XML work
* Copyright:    Copyright (c) 2002
* Company:
* @author Clifton Craig
* @version 1.0
public class Stylizer {
// Global value so it can be ref'd by the tree-adapter
static Document document;
public Stylizer()
public static void main(String[] argv)
    if (argv.length != 2)
      System.err.println ("Usage: java Stylizer stylesheet xmlfile");
      System.exit (1);
          DocumentBuilderFactory factory =
          DocumentBuilderFactory.newInstance();
          //factory.setNamespaceAware(true);
          //factory.setValidating(true);
          try
               File stylesheet = new File(argv[0]);
               File datafile = new File(argv[1]);
               DocumentBuilder builder = factory.newDocumentBuilder();
               document = builder.parse(stylesheet);
               // Use a Transformer for output
               TransformerFactory tFactory =
               TransformerFactory.newInstance();
//               StreamSource stylesource = new StreamSource(stylesheet);
               StreamSource documentsource = new StreamSource(datafile);
               DOMSource styler = new DOMSource(document);
               Transformer transformer = tFactory.newTransformer(styler);
               StreamResult result = new StreamResult(System.out);
               transformer.transform(documentsource, result);
          catch (TransformerConfigurationException tce)
               // Error generated by the parser
               System.out.println ("\n** Transformer Factory error");
               System.out.println(" " + tce.getMessage() );
               // Use the contained exception, if any
               Throwable x = tce;
               if (tce.getException() != null)
                  x = tce.getException();
               x.printStackTrace();
          catch (TransformerException te)
               // Error generated by the parser
               System.out.println ("\n** Transformation error");
               System.out.println(" " + te.getMessage() );
               // Use the contained exception, if any
               Throwable x = te;
               if (te.getException() != null)
               x = te.getException();
               x.printStackTrace();
          catch (SAXException sxe)
               // Error generated by this application
               // (or a parser-initialization error)
               Exception x = sxe;
               if (sxe.getException() != null)
               x = sxe.getException();
               x.printStackTrace();
          catch (ParserConfigurationException pce)
               // Parser with specified options can't be built
               pce.printStackTrace();
          catch (IOException ioe)
               // I/O error
               ioe.printStackTrace();
}//End Main
}

Which user/credentials does APEX use to execute packages

Which user does APEX use to execute a function or procedure in the parsing scheme of an application. I am trying to debug an custom authentication scheme which calls a package procedure.

Mathias Oracle wrote:
Which user does APEX use to execute a function or procedure in the parsing scheme of an application. I am trying to debug an custom authentication scheme which calls a package procedure.APEX connects to the database using connection pooling as the APEX_PUBLIC_USER or ANONYMOUS schemas, depending on the webserver configuration (except where a DAD has no username/password defined). Code is executed via the <tt>dbms_sys_sql</tt> package using the privileges of the application parsing schema. See:
{message:id=926724}
{message:id=1224601}
Application Express and parsing of SQL

Which control surface do you use, would like to use or have used for audio?

I am shopping control surfaces for mixing audio in Premiere Pro CC. I am buying used so I would sure like to get it right the first time. I am looking for feedback from those who have used a control surface as well as those who have just looked around. I have searched high and low for information from Premiere Pro users but have found very little. Even the Audition folks have not shared much information about experiences with audio control surfaces.
Here are some consoles I've looked at but cannot determine compatibility (due to lack of information):
Mackie Control Universal MCU Pro 8
Digidesign Command 8
Digidesign Digi 002 Pro Tools Console
M-Audio ProjectMix I/O Control Surface
Icon QCon Pro USB Midi Controller Station
Behringer B-Control Fader BCF2000
Radikal Technologies SAC 2.2 DAW controller
Avid Artist Mix Control 8 Fader Euphonix DAW Mixing Control Surface
Tascam FW-1884 Firewire Control Surface
Tascam FW-1082 Firewire Control Surface
CM Labs Motormix
CM Labs Motormix 2
CM Labs MotorMate
Novation ZeRO SL MkII MIDI DAW Control Surface
Nektar Panorama P1 USB Midi DAW Control Surface
Alesis Master Control
If you have experience with any of these consoles, or have any to add to the list, specifically with Premiere Pro, please leave a note here. I believe there will be others who will check this discussion looking for the same answers as I. Documentation of these control surfaces is very thin when it coms to discovering if they are MCU or EUCON protocol (or other) - and even if I was able to discern a flavor I still do not know which features will work in Premiere, such as transport controls, faders, plug-in modifiers, et al.
So I guess my goal here is to come up with a list of work/don't work features for each of these control surfaces and more so we can make informed bang for the buck decisions. My budget for a used control surface is $300-400, but I'd be willing to go to $500-600 or more if the features/integration were significantly better.
Thanks!

Here is the list with the responses I have received from the manufacturers, (3) so far.
Mackie Control Universal MCU Pro 8
The MCU Pro uses three different types of MIDI operating protocols (Mackie Control, HUI, and Logic Control). We have not tested the MCU Pro here in Tech Support with Premiere Pro. You will want to contact Adobe directly to see if they support the Mackie Control, HUI or Logic Control protocols with the Premiere Pro software. It is up to the manufacture of the software on how well these MIDI operating protocols are implemented into the software. With contacting Adobe directly you will be able to see what control surfaces are supported with their software.
Digidesign Command 8
Digidesign Digi 002 Pro Tools Console
M-Audio ProjectMix I/O Control Surface
The Project Mix I/O is a discontinued product. However, it should work properly with basically any DAW program. I can't speak to specifically Premiere Pro, but we have a few customers who use that combination and those customers report it works just fine.
Icon QCon Pro USB Midi Controller Station
Behringer B-Control Fader BCF2000
Thank you for your email! Yes, you are able to use the BCF2000 to control Adobe Pro CC. YOu will need to program the controller into Mackie Emulation mode. Mackie Emulation will allow full functionality within your software. Attached you will find a PDF showing each emulation mode. Here are a few informative links explaining setup and application:
http://forums.adobe.com/thread/1286249
http://helpx.adobe.com/premiere-pro/using/control-surface-support.html
The former will provide a better understanding of connectivity.
Radikal Technologies SAC 2.2 DAW controller
Avid Artist Mix Control 8 Fader Euphonix DAW Mixing Control Surface
Tascam FW-1884 Firewire Control Surface
Tascam FW-1082 Firewire Control Surface
CM Labs Motormix
CM Labs Motormix 2
CM Labs MotorMate
Novation ZeRO SL MkII MIDI DAW Control Surface
Nektar Panorama P1 USB Midi DAW Control Surface
Alesis Master Control

What file does ipod use for library and how do i access it?

Hi.
I almost put this in the ipod discussion but the question has to do with itunes as well...
I have learned that itunes uses an xml file for the library, containing all song information and playlists (not sure about id3 tags for .wav, mp3) but when i looked at my data for the ipod i found no .xml files.
Heres what happened and why i need this:
unplugged the ipod after an osx reboot to winxp bootcamp hung. then i noticed the ipod was erased (or so i thought)
Couldn't access any of the data on the ipod and hadnt a spare 80 gigs to back up my ipod.
I didn't give up and after trying so many data recovery programs i got one to work and now i have what looks like all the songs back - with song titles and filenames - on my comp.
I want my library back too. I want my hard wrought playlists and i want to know what songs i may be missing; I need to rebuild my 'library'.
with the data i retrieved there is a folder called root, and if you follow and go to ipod control>Itunes there are a bunch of temp files and a large file called ipodcontrol and a couple files called playlist but those two were umm, empty. I dont know what any of this stuff is but if i knew how the ipod makes its library that would be a start in seeing if i can somehow get the library back. I know there is a way. I also am sure there are tons of people out there whose tracks have been erased after an auto update or unplug. You can get your music back! It would be so sweet to figure out how to reconstruct the library file too.

I forgot to mention that for you people who have inadvertently erased your ipods, the data recovery program that worked the best for me was called R-Studio.
So anyone know what file ipod uses for its internal library?

Which control file does RMAN use?

Similar Messages

Maybe you are looking for