Which item need to tax

hi,
in me23n line item conditions, there are 2 main value. net value(either base on standard or map item value) and effective value (also include of freight, duty)
1) may i know for both standard price and moving average price item, input tax during miro is based on net value(only stock or merchandise item value) or effective value(also include of freight, duty)?
2) most of the case, custom and freight forwarder different vendor from the stock vendor. when do miro for freight and custom, should include input tax?
3) basically i need to know whether standard price or moving average price item, input tax is based on
a) stock or merchandise item value only or
b) stock or merchandise item + duty + freight + etc.
thanks

Hi there,
Taxes on material/ Goods or services depends upon three things wher ther your vendor is taxable, material or service is taxable, and your material/ service availed is taxable or not..
So if the vendor from whom you are procuring the material or services is charging you some taxex you will have to pay that which will directly go to the govt for devlopment purpose.
The net amount of an Po line item less discounts offred by your vendor if any add freight if it also taxable.. Basically transportaion is one kind of service so service tax is applicable on it.
Hope it clears your doubts
Regards
Sujoy

Similar Messages

  • Vendor Open items upload- Withholding tax liable tick

    Hi all
    I have uploaded the Vendor open items. At the time of upload, Withholding tax was activated at the co code level. However, the liable to TDS tick was not checked. Now when I activate the liable tick and go to F-53 to pay the open items, I get an error of Items not activated due to Inconsistent Withholding tax. How do i resolve this error. I think there is a program which we need to execute to correct this. Can any1 help me with the program name?
    Thxs in advance
    Hrishi

    RFWT0010 is a programme to run for Open items adjustment.
    Let me know the result.
    thanks
    prabhakar

  • User Exit during Sales Order Creation - New Line Item needed

    I have a situation during the process of sales order creation. If a Material in a line item has say 27 EA and the Base Unit is EA. But the Sales Unit is CSE. Then whenever the user enters 27 EA and presses enter he should get two line items.
    The first line item needs to convert to maximum number of CSE posible and the rest will be the second line item with the remaining EA. The order isn't important but that is what is needed. Question is how do I approach this problem and code my user exit accordingly and where do I code it.
    I was looking at SAPMV45A and saw the program MV45AIZZ which is meant as a user exit for any PAI event handling. If anybody has encountered this kind of requirement can you please share your view on this.
    I will definitely reward points for useful answers.
    Clark

    Hello Mahendra
    The requirement is as follows :
    PART 1:
    Sales Order Enter: 
    1.     When a line item is entered on a sales order (VA01 or VA02), at enter, check the sales unit of measure (VBAP-VRKME).
    •     Do not check line items where item category (VBAP-PSTYV) = TANN, TAPS or ZTAP.  TANN are free goods that should not be considered for consolidation.  TAPS & ZTAP are lower level materials as a result of product selection.  They will be attached to a higher-level material with an item category of TAX, which is relevant for consolidation.
    •     Do not check items where VRKME <> EA
    2.     If VRKME = EA, go to MARM for MATNR.
    3.     Go to record where alternate unit of measure (MEINH) = CSE, get the value from the numerator field (UMREZ).
    4.     Divide the order quantity (VBEP-WMENG) by UMREZ.
    5.     If the result is greater than 1.0, the customer has ordered more than one case and a new line item needs to be added to the sales order for the case quantity.
    6.     Add a new line to VBAP for the same material with the case quantity.  If not a whole value, the remainder of eaches (bottles) should update the qty on the first item on VBAP.
    •     Part 1 is relevant for order types ZCA, ZOR, ZSO, RE, ZSM
    PART 2:
    Batch Job to run prior to the Delivery Due List:
    1.     Read VBUK for Delivery Status (LFSTK) = A (delivery not processed).  Get all of the document numbers (VBELN).
    2.     Go to VBEP for those document numbers to get the goods issue date for the order.  There will be many records in VBEP for the same sales order.  Look at all orders with a goods issue date (WADAT) of next day.
    3.     Go to VBAK for those document numbers to see if there are multiple sales orders for the same Sold To party (KUNNR).
    4.     For customers who have more than one order in VBAK, search all line items (for all orders).  If there are no duplicate materials across sales orders, do nothing.
    •     Do not check line items where item category (VBAP-PSTYV) = TANN, TAPS or ZTAP.  TANN are free goods that should not be considered for consolidation.  TAPS & ZTAP are lower level materials as a result of product selection.  They will be attached to a higher-level material with an item category of TAX, which is relevant for consolidation.
    •     Do not check line items where reason for rejection (VBAP-ABGRU) is not blank
    5.     If there are duplicate materials, go through the same logic as in part 1.  If the quantity across the sales orders adds up to greater than one case, add the appropriate quantity to a new line item on the first sales order.   If there is a remainder qty, update the line item on the first sales order with this qty. In this case, the quantities on the second sales order needs to be closed out with a reason for rejection code of 50, ‘Line Item Consolidation’. If there is no remainder,  update the qty on this item directly.
    •     Part 2 is relevant for order types ZOR, ZCA, ZSM
    •     This batch job will have to be run manually for Day Pick orders.  The end of this program should automatically kick off the delivery due list for Day Pick orders, shipping condition 02.
    Business Justification:
    The business requires that like order line items be consolidated to one line item prior to the order going to the warehouse for picking.  This will aid in picking at the warehouse as well as result in the customer invoice not reflecting more than one line item for the same material.  In the case where the customer has truly ordered more than a case, i.e;, 1 case, 2 bottles, the documents in SAP will still reflect 2 lines.

  • Standard LSMW for open vendor items with Withholding tax

    Hi All,
    I am searching the direct input LSMW which is having the Withholdig tax. There is a direct input program in LSMW ( RFBIBL00) but it is not uploaded the withholding tax for open vendor and open customer items.
    If anybody know which LSMW is recammanded or anthing related to BAPI or IDOC for this requirements.
    Dhiraj.

    Hi
    If you need to upload the WT tax you have to fill the structure BWITH of std BI RFBIBL00, so your LSMW project should create a file like this:
    ---> Session data
    BGR00
    ---> Document data
    BBKPF (Header data
    BBSEG (Vendor or customer item)
    BWITH (Withholding tax data)
    BBSEG (G/L item)
    Max

  • Item's withholding tax amount is not zero

    Dear All,
    When ever we clear the vendor account through f.13 system was showing the below mentioned message.
    S No customer documents selected
    S No G/L account documents selected
    I Only accounts with debit and credit postings are included
    X Item's withholding tax amount is not zero 0101 K 319936 13000031 105352237 1
    X Item's withholding tax amount is not zero 0101 K 319936 13000031 105352237 2
    I Stop date " 02.01.2010 Stop time " 17:00:00
    Client is asking no need to show Items withholding tax amount is not zero message.
    Where as the clearing criteria is business place .
    Regards,
    Teja

    Hi,
    please refer to the note 499902 and 442588 for the explanation why the transaction F.13 has given out
    this error and which transactions (FBZ2 or F-53) should be used to clear the items with the withholding tax info maintained.
    Reg
    Madhu M

  • Error : Tax statement item missing for tax code

    Hello Gurus,
    I have issue while releasing a billing document to accounting from VF02. The error says 'Tax statement item missing for tax code AA'
    Any idea??
    Prase

    Dear Prasanth,
    Please review note 112609 and 400766 carefully, which explain the
    tax rules.
    The FF805 error is most likely triggered due to configuration in
    the pricing procedure.
    If an active tax condition record is found (for example on UTXJ), even
    though it is statistical, the tax code (linked to the record) is then
    distributed to the active price conditions for that item pricing.
    When it passes to FI, the active tax condition is passed but not
    the price because an active price condition cannot be found.
    In the SD-FI interface, for every price condition sent over,
    there MUST be a tax condition sent over, hence the FF805.
    I think may be what is happening in your case.
    If after setting reference steps in your procedure according to the
    guidelines in 112609, you still encounter the FF805, please let me know.
    Hope this is helpful. Thank you.

  • Tax statement item missing for tax code O3

    Hi experts,
    I'm sorry about my question which can find out a lot in SDN forum, but i still post this here because my case is different, I see some similar Error, but I cant solve my issue.
    In sales standard process, I do SO, DO, Bill without that error. but Just Free goods process.
    I have a error in Free goods process
    I create SO for Free goods and enter manual quantity and Item category
    (I'm using R100 condition for free good)
    Then create Delivery.
    Then create Billing, save and get error:
    Document 90000319 saved (no accounting document generated)
    Message no. VF050
    After that, I go to VF02, and click to Release flag, I get:
    Tax statement item missing for tax code O3
    Message no. FF805
    Diagnosis
    No tax item exists for tax code O3 in a G/L account item. A possible
    cause is an incorrect transfer of parameters by the application to the
    Accounting interface.
    Procedure
    Enter an OSS message.
    I search in OSS note, but I cant solve it.
    Please help me to solve this Error,
    Many thanks

    Hi,
    In FS03, I see allowed output tax in tax account.
    I get the reason of this error, but I dont know how to solve.
    In my procedure, I have some condition type:
    PR00 - price
    R100 - 100% discount
    MWST - Output tax
    and, Z001: FEE (This amount must sent to Goverment, no tax, so I enter higher Step no. in procedure)
    In case Free goods, in VF01 must: (example: Sent 1 material A (price 10) to customer for free, no tax, but Fee (1))
    Dr: Customer account: 1
    Dr: Sales deduce: 10
        Cr: Sales revenue: 10
        Cr: Fee: 1
    But I cant post this transaction.
    Can you give me a solution for this case?

  • Tax statement item missing for tax code O0

    Hi all,
    i am getting an error message while releasing SD billing documents to Accounting. the complete error message is
    NA FF805
    Text:
    Tax statement item missing for tax code O0
    Diagnosis:
    No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
    Procedure:
    Enter an OSS message.
    It would be great help if some one reply back with what should i do..
    We are on R/3 4.7 enterprise
    Thanks in Advance
    Sivaram

    HI Sivaram,
    Please review note 112609 and 400766 carefully, which explain the tax rules.
    The FF805 error is most likely triggered due to configuration in the pricing  procedure.
    If an active tax condition record is found (for example on UTXJ), even though it is statistical, the tax code (linked to the record) is then distributed to the active price conditions for that item pricing.
    When it passes to FI, the active tax condition is passed but not the price because an active price condition cannot be found. In the SD-FI interface, for every price condition sent over, there MUST be a tax condition sent over, hence the FF805.
    I think this may be what is happening in your case.
    Normally it would not be advised to bypass the check in FI_TAX_SV_BSEG_BSET_GROSS - please note that when passing from SD to FI:
    -> There must be at least a revenue line for each tax line.
    -> For each revenue line containing a certain tax indicator there must be a tax line with this indicator.
    -> If a tax condition has base value = 0  OR is inactivated OR is statistical => then it is not passed to FI.
    I hope this information will help you to solve your issue. If it resolves your issue, kindly confirm this message at your earliest convenience. Otherwise, please give me feedback for further analysis.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Tax statement item missing for tax code O0 .     ||Message no. FF805

    Hi Gurus,
    I am trying to post SD billing document to accounting. The system issues error message FF 805 - Tax statement item missing for tax code O0. Our Development and Production systems are working fine and we have this issue with the quality system.
    The following TCODES are verified for the configuration in FI  and SD.
    FTXP, FS00, V/0K, V/08, VK13, MEK3, FB13, VK0A
    We have gone through the checklist specified in the following threads.
    Error : Tax statement item missing for tax code
    FF805 Tax statement item missing for tax code
    FF805 Tax statement item missing for tax code O0
    Tax code error
    Eror message FF805 when mwst based condition value is zero
    As well as refered the following OSS notes and checked the configuration with the development/production systems, which seems to be exactly same.
    Note 971253 - Causes for error message FF805 in SD
    Note 112609 - How are tax codes transferred to conditions ?
    Note 400766 - Changes in accounting interface for Release 4.6
    Please let us know if we are missing anythig else.
    Thanks,
    Veeru.

    Issue resolved, Ultimately there was some user-exit missing.
    Thanks,
    Veeru.

  • FI-SD Error FF805  No tax item exists for tax code R4 in a G/L account ite

    Dear, I have create IN ECC 6.0 a sales orden whit the following conditions
                                                                 CONDITION VALUE
    VKPO   Price Sales                0,00   EUR
    MWS     Sales Tax     4,000 %     0,00   EUR
    ZGGM    recharges                 100,00   EUR
    I have creata a billing document but when I execute the vf02 transaction for Release to Accountg apper the following error message
         Message no. FF805
    Diagnosis
         No tax item exists for tax code R4 in a G/L account item. A possible
         cause is an incorrect transfer of parameters by the application to the
         Accounting interface.
    The pricing procedure is
    1     0     VKP0 2     2   5     0                                                                  6
    10     0     MWST  Sales Tax     S1016
    30     0                              2     4
    40     0     ZGGM30     5     5       
    This process work correctly in 4.5b version but not work in ECC 6.0
    I have cheking the note 112609 and other notes but work
    thanks

    Hi,
    Error message FF805 is usually due to configuration issues.
    Tax conditions, especially the main ones UTXJ or MWST can not have a condition base value that is 0. If you are using UTXJ, the condition needs to be statistical and 100%. This condition controls how all the remaining tax conditions are calculated; and how the tax codes are determined.
    Another cause of the error message is due to the reference steps in the pricing procedure. If the tax condition references a line that is not calculated in your document, the base value is 0 and you get the error. These reference steps also control how the tax codes are distributed. If you have conditions that are active and do not have a tax code, they are not within the reference for the tax condition, and you will get this error message. You must also have an active price for the tax condition to copy to when the billing document is released to accounting.
    Please also checknotes 327373, 400766, 385127..
    Hope this will help.
    Regards,
    Naveen.

  • A/R invoice PLD for BOM items need to hide the unit price

    Dear All,
    Our customer would like to have an A/R invoice like this: if the invoice has any BOM item, the unit price of child items should be hid. That means, I need to determine, if the item is the child of its parent, hide the unit price of it. Is there any way for me to know which item is the child item in A/R invoice PLD? I cannot find a column like status of item in the table that tells me this item is a regular item and that item is the child of an item. Thanks a lot.
    Regards,
    Yuka

    Thanks for your reply. The problem is, an item in the invoice might be the child item or the regular item.
    e.g, we have item A and B, they the child item of C. In the invoice, the customer may order 5 item C then add 10 item A as well.
    Then the invoice will like this
    C    5
    A    5
    B    5
    A    10
    Then they would like to hide A 5 B 5 but display A 10 as regular item.

  • Conversion Routine Needed for Tax Code MWSKZ in FM Calcualte_tax_from_netam

    i  am passing BUKRS,MWSKZ,WRBTR AND WAERS in CALCULATE_TAX_FROM_NET_AMOUNT. From this i get WMWST.
    which i need 2 use for calcualating CST(logic is where KSCHL = JVCS ).
    But while debugging the code, i get value of MWSKZ as V0 which is maintained as 13 in EKPO Table.
    Hence i get WMWST field as 0.
    Do i need 2 use a Converision Exit to convert MWSKZ from V0 to 13 ????
    Pls assist.

    yes i got 2 tax codes in T007A.....but then i shud get the value of WMWST from the FM.
    i debugged the code again but m not gettin the flaw in data retrieval logic !!
    This is the logic i used :-
    T_RET TYPE STANDARD TABLE OF RTAX1U15,
    CALL FUNCTION 'CALCULATE_TAX_FROM_NET_AMOUNT'
              EXPORTING
                I_BUKRS                 = 'RALI'
                I_MWSKZ                 =  WA_FINAL-MWSKZ
             I_TXJCD                 = ' '
                I_WAERS                 =  'INR'
                I_WRBTR                 = WA_FINAL-NETWR
             I_ZBD1P                 = 0
             I_PRSDT                 =
             I_PROTOKOLL             =
             I_TAXPS                 =
             I_ACCNT_EXT             =
           IMPORTING
             E_FWNAV                 =
             E_FWNVV                 =
             E_FWSTE                 =
             E_FWAST                 =
              TABLES
                T_MWDAT                 = T_RET
           EXCEPTIONS
             BUKRS_NOT_FOUND         = 1
             COUNTRY_NOT_FOUND       = 2
             MWSKZ_NOT_DEFINED       = 3
             MWSKZ_NOT_VALID         = 4
             KTOSL_NOT_FOUND         = 5
             KALSM_NOT_FOUND         = 6
             PARAMETER_ERROR         = 7
             KNUMH_NOT_FOUND         = 8
             KSCHL_NOT_FOUND         = 9
             UNKNOWN_ERROR           = 10
             ACCOUNT_NOT_FOUND       = 11
             TXJCD_NOT_VALID         = 12
             OTHERS                  = 13
            IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
            ENDIF.
    LOOP AT T_RET INTO WA_T_RET.
              IF WA_T_RET-KSCHL EQ 'JVCS'.
                LV_CST = LV_CST + WA_T_RET-WMWST.
              ENDIF.
            ENDLOOP.
            WA_FINAL-WMWST_CST = LV_CST.
            clear : LV_CST.

  • How to give commitment item while posting tax

    how to give commitment item while changing tax %.

    HI
    Commitment Item will be derived from the G/L account. You need not enter the commitment Item. Whenever u create a G/L account go to FMDERIVE and assign the G/L account to the commitment Item.
    Hope this helps. If it helps plz assign points.
    Regards
    Rajaram

  • Which Item Position for screws

    Hi,
    I want to create a PO. I don't know which Item position for materials "screws" I must give.
    Thanks
    Dede

    Hi
    You need explain your question clearly.
    Please find this link, may be helpful
    http://help.sap.com/saphelp_47x200/helpdata/en/75/ee0d9b55c811d189900000e8322d00/content.htm
    regards
    Srinivas

  • The App Store indicates that 5 items need to be updated. When I go to the Update page, only a blank page appears and no application logo appears for updating. Would appreciate receiving a solution for this.

    The App Store indicates that 5 items need to be updated. When I go to the Update page, only a blank page appears and no application logo appears for updating. Would appreciate receiving a solution for this.
    Sridhar

    Okay - let's cut to the chase...
    If the Menu Bar (File, Edit... Help) shown in my screenshot below is not visible, use CTRL+B to display it. Then click on Help/Check for Updates. If one is available, you will be able to select it at this time.
    Note the item at the bottom of the list; About iTunes. Selecting that will show you which version of iTunes you are using.
    An alternative method to display the Menu Bar is click on the box in the top left of your iTunes window...

Maybe you are looking for

  • Can't Drag & Drop Cross Fade Transition ?

    I'm a new user and can't figure out why when I attempt to drag and drop a cross-fade transition into my timeline it won't stick or apply. Can anybody help with this. Also, is there a setting that would automatically apply the cross-fade transition to

  • Can't see stored procedure in database explorer

    I'm using mysql 5.0. When I expan the database in database explorer, I can see only tables.  Stored procedure folder is shown there but when i try to expand it..nothing inside it.   Anyone knew the solution,  Could u please help??! Thanks in advance.

  • Acrobat 8 - Settings to convert RGB colours to CMYK

    Hi, I create A1 & A0 size maps as adobe pdfs. The mapping software I use will only allow me to select R G B colours which is fine and produces the maps with the exact colours I want. However, when I want to print my pdf maps the large format printers

  • How can I do a simple fade transition between clips??

    I'm trying to learn my new Premiere Elements 9. I am a simple man, with simple needs. I like to just do a simple fade transition between video clips. There is no "fade" option on the transitions for PE9, I have tried "cross disolve" and "non-additive

  • Importing music from vinyls

    How do I import music from vinyls using my turntable connected to the imac? Can I use Itunes or do I need a different software?