Which method is easiest for uploading data using LSMW?
which method is easiest for uploading data using LSMW (Direct method or batch input method) bcs I am facing lot of problem using batch input method while recording.Even I cannot use direct method using standard program.can anyone tell me some other easiest way for uploading MM01.?
I personally used the direct input way 6 years ago and it was a little bit of a struggle cause I was very new to SAP at the time. But it worked out to be ok in the end. You just have to keep messing with it till the errors are clear and then you can upload for real. The test mode is a nice touch, you can get rid of all of the errors before actually uploading the data.
Regards,
Rich Heilman
Similar Messages
-
How will decide which method is suitable for uploading data
Hi,
How will you decide which method is suitable for uploading dataHi,
<li>If you haver very few records, even entering manually is also an option.
<li>In most cases where we need more than 20,000 records , BAPI or Direct input would be the fastest. Here error handling is tough here.
<li>You can use BDC(Session and Call transaction methods), where we can write code to identify error records, if you get error records, those can be reprocessed.
Thanks
Venkat.O -
Which one is better for uploading data LSMW or ECATT ?
I am going to implement my product in customer place.which tool I can use for uploading data.ECATT or LSMW whch one is better to upload master data and transaction data ,which one is user friendly?kindly guide me on this.
Hello TJK,
LSMW and eCATT has different functionalitites and different advantages, but common thing is they are used for data upload.
eCATT is mainly used as a testing tool for follow-on transactions i.e. Purchase Requisition, Purchase order, Goods Receipt etc.
Where as LSMW is used for Master data (Materials, Customer, Vendor, BOM, Inforecord etc) and some of the transactions data (Purchase order, purchase requisition)
There are many standard objects are available in LSMW so most of the consultants use LSMW, but again depends on the requirement.
This will help to understand the basics of eCATT.
/people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
and here it is for LSMW
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step
Hope this will help.
Regards
Arif Mansuri -
For transaction code MD61, I want to upload data using BAPI
Hi,
for transaction code MD61, I want to upload data using BAPI.
Which BAPi I ll call ?
Can anyone suggest me how to do it with any simple example program ?Refer the thread for details about coding-
BAPI_REQUIREMENTS_CREATE
Reards,
Amit -
UPload data useing BDC for cost element allocation
Hi ALL,
i have to upload data useing BDC , have to upload data for cost centre accloction table ,What is the T.code and how to do it, i have knows LSMW,
very useful for me
Advance Thanks
NarraUsing BDC means...use theTCODE: SHDB + ABAPer help, it requires program need to create for this....you can have options in BDC is...u can test the data validity before you upload the data
VVR -
How to upload different views of customer master data using LSMW-IDOC
I need to upload customer master data using LSMW Idoc method for my client. Now customer will have different views like main view, Sales data, Company code data, Partner function data etc. And except main data all other data can be multiple for each customer. We are going to upload data from tab delimited .TXT file. Should I propose different LSMW for upload different views for the customer from different .TXT files? or we can upload all the customer related data (like main view data and partner function data )from a single .TXT file. Kindly suggest which one in convenient and how we can prepare the data file in both cases.
convinient is the method that you can handle.
but as the guy who loads the data you have to load the data like they are available, like it is convinient for others to prepare the data.
In general there is no problem to use an IDOC method to load a customer master with multiple comany codes and several sales orgs in one shot.
the data can be in one source file, but need then to be maintained in a certain way
Example1: all data in 1 structure
GD1 - CC1 - SO1
GD1 - CC2 - SO2
GD1 - CC2 - SO3
in this case the GD (general data) is redundand in each line which has different Company code data or different Sales Org data
Example2: all data in 3 sturcures but one file
GD1
.CC1
.CC2
..SO1
..SO2
..SO3
Example3: data delivered in 3 files - you join the files in LSMW, they must have a common identifier like the old customer number in the beginning of each file
FILE General data:
GD1
GD2
GD3
file Compamy code data:
CC1
CC2
CC3
file Sales org data:
SO1
SO2
SO3
LSMW is flexible and can handle each of this scenarios, are you flexible too? -
How to upload data using utl_file when you dont know the exact file name
Hi
i want to upload data from a flat file to a table.
i dont know the exact file name. i want to make a search for filename. like i want to make a search on file (say test*) which will give me all the files with test.
i want to upload data using these files.
how can i do this by using UTL_FILE.
Regards
ManishThank you very much.
Thing is previously we are using sqlloader and shell script for loading the data.
now i am creating a procedure (if possible without parameters).
Is there any other way i can do that.
can i make a wild card search using utl_file.
Thanks n Regards
Manish -
BDC for Uploading data from XL sheet with unknown order of fields
Hi SAP Gurus,
My requirement is as follows,
A BDC is to be developed for uploading data from an XL sheet, but the problem here is , the order of fileds in the sheet can be changed .
ie, for example the fields in the XL sheet are :-
matnr maktx menge amount
but the user can give as
matnr amount menge maktx
or
maktx matnr amount menge
how i can solve this problem.
Thanks and Regards,
pavan.Hi Pavan,
You need to handle it by your self, you can create a dynamic table based on the file value.
The field name pass from file with the record as a header, and based on the header name create your dynamic table.
afterward you can pass your value to BDC.
for creating dynamic table you can use this method
call method cl_alv_table_create=>create_dynamic_table
exporting
i_style_table =
it_fieldcatalog = it_field[]
i_length_in_byte =
importing
ep_table = dyn_tab
e_style_fname =
exceptions
generate_subpool_dir_full = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
-Dhirendra -
Problem in Uploading sales order text data using LSMW
Hi All,
I am facing Problem in uploading open sales order data from legacy to SAP using LSMW.
We are trying to upload sales order data using LSMW Standard Batch/Direct input using program name RVINVB10 and program type D. We are not able to upload item text but have no problem in uploading remaining data.
the details we are passing to BTEXHKOM structure are......
BTEXHKOM-OLDNR = IHEADER-OLDORD_NO.
BTEXHKOM-LAISO = 'EN'.
BTEXHKOM-TDID = 'Z009'.
and the for structure BTEXLKOM
BTEXLKOM-OLDNR = IHEADER-OLDORD_NO.
BTEXLKOM-TXPARGRAPH = '/'.
CONCATENATE LITEM-DEPTID LITEM-DEPTNAME
INTO BTEXLKOM-TXLINE SEPARATED BY ' '.
we have three input source structures.
IHEADER Header structure
LITEM Line item structure ( Material data )
IPARTN Partners structure
The structure relationships are
BTEXHKOM <<< IHEADER.
BTEXLKOM <<< IHEADER.
Please let me know if I am doing some thing wrong or some thing else need to be done.
Thanks,
Chindam.you can pass below values also
OLDNR : order number and item nuber
TXPARGRAPH : VBBK
TXLINE : your text..... -
In RFC how to uploading data using bdc
Hi, Experts
In RFC how to use bdc program for uploading data
any example plz.
my requrement for tcode ME21.
thank you in advance.
with best regards
saiThank u reply
my requirement is in function moudle
( Program will be called from non-sap system with the data in the form of table as per the structure given above. Then the program will do the some validation for the data. If data validated correct, BDC will be run for creating DO
condition is )
ex:
if T_itab KNTTP = K,
Run BDC for transaction ME21.
( in that you should not use upload and ws_upload )
in put paramer is taking value for structure (non- sap ) run the bdc update in sap system.
plz any sample program
regards
sai -
Program RFEBKA00(T-Code- ff.5 ) for upload data problems
Hi Gurus,
Program RFEBKA00(T-Code- ff.5 ) for upload the bank statement data and passing the with parameters.
When execute then :
Getting warning message u201CWRONG PARAMETER: FILE_NAMEu201D
Getting error message u201CFile in disk drive can not be openu201D.
My text file data for upload:--
0000 01INGBNL2AXXXX00001
0000 01INGBNL2AXXXX00001
940 00
:20:INGEB
:25:0656905271
:28C:132
:60F:C100708EUR25470,35
:61:100709C2885,40N078
:86:AT673200000003743077 RLNWATWW F . W Kopieranstaltbetriebs- GmbH
:86: RG: 1001853
:61:100709C1296,41N078
:86:0666065284 Drukkerij Wilco BV Postbus 1477 3800 BL AMERSFOORT F
:86:ACT.NRS 1001851
:62F:C100709EUR29652,16
:64:C100709EUR29652,16
:65:C100710EUR29652,16
:65:C100711EUR29652,16
:65:C100712EUR29652,16
:65:C100713EUR34204,84
:65:C100714EUR34204,84
:65:C100715EUR34204,84
:86:D000000C000002D0,00C4181,81
:86:CF (Netherlands) Holding Limited BV
-XXX
If you have any Idea for upload data in ff.5 TCode please help.
Subasha SahooHi Sunita,
If your data is in a text file , simply save the file as tab delimited.
Then use FM 'GUI_UPOAD' to upload the file data into internal table.
Hope this helps.
Regards,
Abhijeet Kapgate -
Can anyone list problems/errors when uploading data using BDC's and BAPI's?
Can anyone list the problems/errors when uploading data using BDC's and BAPI's?
Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya. -
Hi Expert,
How to upload data using BDC. I have uploaded using LSMW....now want to know how to upload data using BDCHI
Ask your Abapper.
First you have to record in SHDB. then you have to generate the program and write the code in SE38
For more details please make a search
regards
Prashanth -
Which carrier is available for GUAM to use for the iPad 2?
I wanted to know which carrier is best for me to use on Guam for the iPad 2?
louven23 wrote:
please don't suggest buying a laptop, as I have already considered that.
Ok - then since the answer to your question is NO - then you have all of ....
Knowledgeable feedback
that there is on the subject. There is no way to connect any device to the iPad except for a camera using the camera connection kit. -
2g data allowance in single line plan is only for 4g LTE or for all data using?
I got a single line plan and an iPhone 5s a couple days ago. I am confused the data allowance is for 4g LTE only or for all data using? Thank you!
Hello edsun1997
I would love to answer this for you. You have 2 GB's to use on our network this will start over at the beginning of your cycle. If you use Wifi and turn off our network, Wifi would not go against that 2 GB bucket.
JoeL_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Spool an output file to dynamic filename
Hi. Let say I have an Oracle Script as following: spool c:\hms_report\HMS.xls SELECT field1||chr(9)||field2 from table1; spool off exit Question: Currently the output file will be HMS.xls If I run the script thrice a day, the HMS.xls will be overwrit
-
Hi, I want to register my iPhone to my support Profile but I get the message: According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see y
-
Do you know if i can use offests in a select? It doens't want to pull back the infromations. Here is my select. SELECT BELNR KOKRS BUZEI GJAHR EBELN EBELP INTO TABLE T_COEP FROM COEP FOR ALL ENTRIES IN T_ICORDCSTA1
-
How to quit the program in Java SE??
Hi, The program below runs perfectly fine, however once I get to the stage of quitting it doesn't work. I would like 'Press any key to continue' to appear once I have pressed q. import java.util.Scanner; public class Week7777 public static void
-
Help requested with the background of lighting effects
I need help creating a light background when rendering with light effects. I am selecting filter, then render, then lighting effects. From there I am choosing an omni light to create a blue light shining from above on my project. The problem I hav