How will decide which method is suitable for uploading data

Hi,
How will you decide which method is suitable for uploading data

Hi,
<li>If you haver very few records, even entering manually is also an option.
<li>In most cases where we need more than 20,000 records , BAPI or Direct input would be the fastest. Here error handling is tough here.
<li>You can use BDC(Session and Call transaction methods), where we can write code to identify error records, if you get error records, those can be reprocessed.
Thanks
Venkat.O

Similar Messages

Which method is easiest for uploading data using LSMW?

which method is easiest for uploading data using LSMW (Direct method or batch input method) bcs I am facing lot of problem using batch input method while recording.Even I cannot use direct method using standard program.can anyone tell me some other easiest way for uploading MM01.?

I personally used the direct input way 6 years ago and it was a little bit of a struggle cause I was very new to SAP at the time. But it worked out to be ok in the end. You just have to keep messing with it till the errors are clear and then you can upload for real. The test mode is a nice touch, you can get rid of all of the errors before actually uploading the data.
Regards,
Rich Heilman

How to decide which access sequence goes for which partner function ?

how to decide which access sequence goes for which partner function ?

Hi Padmaja,
If i understand your question correctly, below is my answer.
Lets take a example : In your requirement ..while creating Sales / service order (for ex if you are creating from preceding document)
you have to pick up the Contact person from preceding document & Employee responsible from responsible organization
For this in partner function assign Access sequence as below.
same way if the partner(here ex: Ship to party) has to be picked up from "Current partner" change the access sequence to "Current partner Sold to party"
Hope this gives better understanding, still for better understanding check the below links
http://www.guru99.com/partner-processing-in-sap-crm.html

Which one is better for uploading data LSMW or ECATT ?

I am going to implement my product in customer place.which tool I can use for uploading data.ECATT or LSMW whch one is better to upload master data and transaction data ,which one is user friendly?kindly guide me on this.

Hello TJK,
LSMW and eCATT has different functionalitites and different advantages, but common thing is they are used for data upload.
eCATT is mainly used as a testing tool for follow-on transactions i.e. Purchase Requisition, Purchase order, Goods Receipt etc.
Where as LSMW is used for Master data (Materials, Customer, Vendor, BOM, Inforecord etc) and some of the transactions data (Purchase order, purchase requisition)
There are many standard objects are available in LSMW so most of the consultants use LSMW, but again depends on the requirement.
This will help to understand the basics of eCATT.
/people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
and here it is for LSMW
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step
Hope this will help.
Regards
Arif Mansuri

Which method is used for event creation

Dear All,
My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.
I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
Can some one guide me, how can I found that which method is used for event creation in different pur org?
How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation.
For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module' for all the workflow - WS92000030, WS92000021 etc.
Thanks in

Hi Sahu,
I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
Istead what i think is, they might have given the Event Condition for each workflow.
In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
Please check this.
Regards,
Gautham

How to decide which adapter to use from IDOC and RFC?

Hi All,
When interating XI with an SAP system,
How to decide which adapter to use from IDOC and RFC?
Thanks.

Hi,
you can also consider to use ABAP Proxy if you are working with Systems based on SAP Web AS 6.40.
Here some useful links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm">ABAP Proxy Runtime</a>
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
XI: Reliable Messaging EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
More links for proxy:
proxies and performance...
Hope this help
Francesco

How can I execute method of Component for name

Hello,
My program has JInternalFrame with some components. Write me please - how can I execute method of Component for name of Component ?
Like this:
... findObject("jTextArea1").cut();
Thank you in advance.

just cycle through the container's components until
you find one where getName equals "jTextArea1"Thank you for your answer.
I'm creating components in runtime (I add panel+JTextArea in JTabbedPane) and I don't know how many components will be in JTabbedPane.
I know only it's names.
I wan't to execute metod JTextaRea_n_.cut() via using JTextaRea_n_.Name.
How ?

Which IDE is suitable for GUI in Java?

Which IDE is suitable for GUI in Java?
I have kind of complex form with many text fields and buttons in a Java application. I have been trying with Netbeans, everything is fine with Netbeans but it is a huge problem when all the graphics components move around when you have too many graphic....
I am looking for IDE with GUI tools??? Any suggestions???
Many thanx for all advices

I tested Eclipse 3.2 and NetBeans 5.5. NetBeans definitely has the more stable, reliable and more user friendly GUI editor.
From the rest of the development - the features of the IDE - I see that Eclipse offers more but with the drawback for the beginner (as I am) that some things are harder to figure out how they work in Eclipse. NetBeans seems more "intuitive" and easier for me. - Emphasizing again that I am a beginner.

Which Airport is suitable for Full-hd streaming?

Which Airport is suitable for Full-hd streaming?

Any of them will be suitable, but for streaming within your LAN I'd recommend either the Extreme or Time Capsule since they use Gigabit Ethernet.

As a part of my Daily Reporting Activity; i have to send 35 SMS everyday. Can someone suggest me which software is suitable for my usage as it's tedious job to forward the same sms report 35 times. I am using IPhone 3GS -32 GB. Sincerly req your reply

As a part of my Daily Reporting Activity; i have to send 35 SMS everyday. Can someone suggest me which software is suitable for my usage as it's tedious job to forward the same sms report 35 times. I am using IPhone 3GS -32 GB. I am using service of Vodafone, Mumbai. & when i first time sent 35 SMS (having habit of Nokia to send group SMS at the click of one button) my IPhone sent 35 MMS.

Found something for you that might be useful:
http://itunes.apple.com/us/app/igroup-sms/id377378452?mt=8

How will mountain lion affect my office for mac 201111

How will mountain Lion affect my office for Mac 2011

I have been using Office for Mac 2011 for almost a year now and the issue started immediately after doing the upgrade.
When I start Outlook I can see that it takes 1 minute plus to set up the identity.
When it finally runs it is very slow and no fun to use. It seems that Outlook is using very few resources when I look at the activity monitor.
Overall it seems that my IMac has become slower than before upgrading to 10.8.
I do not have support with MSFT anymore and I do hope that somebody does report this issue to MSFT.
To me it seems to be very clear a result of the upgrade.
Hope that helps.

On my iPhone 4s, I sent a picture via email and asked to size it down. However, it seems now that the pic stored on my iphone is now forever the smaller size which is not suitable for printing. Is there any way to get the larger size back?

On my iPhone 4s, I sent a picture via email and asked to size it down. However, it seems now that the pic stored on my iphone is now forever the smaller size which is not suitable for printing. Is there any way to get the larger size back?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Which CKM is used for moving data from Oracle to delimited file ?

Hi All
Please let me know Which CKM is used for moving data from Oracle to delimited file ?
Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

Addy,
A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
HTH

How to How to get FI field status settings for General data

Hello All,
Can you please tell me How can I achieve field status settings for General data.
I have some code to get field status settings for account assignment block but I need General data block data.
Can you please help me with the same.
I got the below code to get field status settings for account assignment block But I need General data block information.
FUNCTION z_fieldstatus_getdetail.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_BSCHL) TYPE BSCHL
*" VALUE(I_BUKRS) TYPE BUKRS
*" VALUE(I_SAKNR) TYPE SAKNR
*" TABLES
*" T_COBLF STRUCTURE COBLF
*" T_FIELDS STRUCTURE TCOBF OPTIONAL
*" EXCEPTIONS
*" ERROR_MESSAGE
* liefert Feldstatus in Liste t_coblf:
* Feldname (DDIC) nicht in der Liste -> Feld ausgeblendet
* Feldname (DDIC) in der Liste -> Feld eingabebereit
* required = 1:
* Mussfeld;
* required = 0: kein Mussfeld
* active = 0: Feld ausgblendet
* Als Hilfstabelle wird die gesamte Feldliste der Felder (t_fields)
* ausgegeben,
* deren Eingabebereitschaft im Customizing steht
DATA: ls_faus1 LIKE tbsl-faus1.
DATA: ls_faus2 LIKE tbsl-faus2.
* Feldstatus holen
CALL FUNCTION 'FI_FIELD_SELECTION_DETERMINE'
    EXPORTING
      i_bschl     = i_bschl
      i_bukrs     = i_bukrs
      i_saknr     = i_saknr
    IMPORTING
      e_faus1     = ls_faus1
      e_faus2     = ls_faus2
    EXCEPTIONS
      customizing = 1
      OTHERS      = 2.
IF sy-subrc <> 0.
    MESSAGE a613(/ssc/comon).
ENDIF.
DATA lv_char.
DATA int_coblf LIKE coblf OCCURS 0 WITH HEADER LINE.
DATA p_cobl LIKE cobl.
DATA: dummy_ktosl LIKE bseg-ktosl.
PERFORM kontierungsblock_ermitteln(sapff001)
TABLES int_coblf
USING lv_char(1)
ls_faus1 ls_faus2 dummy_ktosl.
t_coblf[] = int_coblf[].
SELECT * FROM tcobf INTO TABLE t_fields.
ENDFUNCTION.
Thanks in Adv.
Kaustubh

Hi ,
Looking at the question the first thing that comes to my mind is what is the organization structure that you are following .
As you have mentioned that you have used segment insted of profit center for splitting , what is the scope of profit center in your implementation .
in implementations where locations are devided as profit centes it becomes very necessary to mandatorily split the documents based on profit center .
in your case as you have set it as segment i dont find it an issue of you keeping it as optional as it will not give you and error during your operations , as you have made profit center optional in splitting charcteristics .
hope this suffices .
Regards ,
Dewang

BDC for Uploading data from XL sheet with unknown order of fields

Hi SAP Gurus,
My requirement is as follows,
A BDC is to be developed for uploading data from an XL sheet, but the problem here is , the order of fileds in the sheet can be changed .
ie, for example the fields in the XL sheet are :-
matnr    maktx   menge amount
but the user can give as
matnr amount menge maktx
or
maktx   matnr amount menge
how i can solve this problem.
Thanks and Regards,
pavan.

Hi Pavan,
You need to handle it by your self, you can create a dynamic table based on the file value.
The field name pass from file with the record as a header, and based on the header name create your dynamic table.
afterward you can pass your value to BDC.
for creating dynamic table you can use this method
call method cl_alv_table_create=>create_dynamic_table
exporting
   i_style_table             =
    it_fieldcatalog           = it_field[]
   i_length_in_byte          =
importing
    ep_table                  = dyn_tab
   e_style_fname             =
exceptions
    generate_subpool_dir_full = 1
    others                    = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
             with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
-Dhirendra

How will decide which method is suitable for uploading data

Similar Messages

Maybe you are looking for