Which one will give more power C2D 2.93 vs i5 2.4

Any one can inform me which one will give more performance MBP C2D 2.93 with NVIDIA GeForce 9400M + 9600M GT with 512MB or MBP i5 2.4 with 330M 256MB
I want it for photos and movies editing ?

Why don't you just go read some benchmarks?
http://www.barefeats.com/mbpp18.html

Similar Messages

  • File Adapter or File  Transport which one will give more performance

    Hi all,
    File Adapter or File Transport which one will give more performance ? in OSB?
    Which one to select any one did performance analysis?
    Thanks
    Phani

    Why don't you just go read some benchmarks?
    http://www.barefeats.com/mbpp18.html

  • X3100&NVS1​40M graphic card,which one can take more quickly in ultiboard Show 3D?

    anyone can tell me,X3100&NVS140M graphic card,which one render speed more quickly,in ultiboard show 3D?
    Actual,I used nvs140m graphic card more slowly than x3100 graphic card obviously.It's right or not?

    I don't think anyone will be able to definitely tell you that one particular graphics card will be better than the other. There are just too many factors. The only way to tell would be to test over and over, and even then, you may not get consistent results.
    Garret
    Senior Software Developer
    National Instruments
    Circuit Design Community and Blog
    If someone helped you, let them know. Mark as solved or give a kudo.

  • Have a G400, OS10.4.11. Need 10.5 or later to install a new printer. Which one will run best? How do I upgrade?

    Have a G400, OS10.4.11. Need 10.5 or later to install a new printer.
    1) Which one will run best?
    2) How do I upgrade?

    It's probably cheaper to buy a new printer & sell the existing on on ebay.
    I have the Cannon pixma mg3120  works fine for me with mac os x 10.4.11.  I am able to refill the color ink jet cartridge.  Press reset + color copy button for 10 seconds.
    http://www.amazon.com/Canon-MG3120-Wireless-All-In-One-5289B019/dp/B005TI2Q8M
    Mac OS® X v10.4.11 to v10.6.x
    http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg3120
    What is a G400?
    You may want to post machine info.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the word hardware.
    Leave out the serial number.
    Example:
    Machine Name: iMac
    Machine Model: PowerMac4,1
    CPU Type: PowerPC 750 (33.11)
    Number Of CPUs: 1
    CPU Speed: 600 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 768 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.1.9f1

  • Same algorithm in function and procedure then which one will better?

    Why pl sql function is better to computes a value instead of procedure?
    If I apply same algorithm in function and procedure then which one will perform better?

    It's not a matter of performance, it is more a matter of how it is going to be used.
    A function can be used as an expression in an assignment or in a query.
    my_var := my_func(my_param);
    select my_var(my_col) from my_table;But it can just return a single value (which can be a complex value like a nested table or object or ref cursor, but still a single value.)
    The procedure often is more used to perform an action that does not return anything.
    execute_invoicing(my_invoice_id);Or procedures can be used if you need multiple return values.
    my_proc(my_input, my_output_1, my_output_2, my_output_3);But the procedure cannot be used in an assignment expression or a select query.
    Performance wise procedures and functions are completely identical. It is only a matter of what action they perform and how you are going to use them.

  • Which table will give me the serial numbers per each delivery?

    Which table will give me the serial numbers per each delivery?

    Hi,
    Table:
    SER01 -> provide links between delivery and serial number object.
    You can select by LIEF_NR = 'delivery number'.
    OBJK -> content of serial numbers
    You can select by OBKNR = 'SER01-OBKNR'.
    Further more:
    You can check in SE11 with name "SER0*". Then you can see a list of tables which contains link between serial number to other document.
    SER01 -> Delivery
    SER02 -> Maint.Contract (SD Order)
    SER03 -> Goods Movements
    SER04 -> Inspection Lot
    SER05 -> PP Order
    SER06 -> Handling Unit-Content
    SER07 -> Physical Inventory
    SER08 -> Purchase Order Item Serial Numbers
    Regards,
    Harry

  • Which one will get better performance when traversing an ArrayList,  iterat

    hi, everyone,
    Which one will get better performance when traversing an ArrayList, iterators, or index(get(i))?
    Any reply would be valuable.
    Thank you in advance.

    Use the iterator, or a foreach loop, which is just syntactic sugar over an iterator. The cases where there is a noticeable difference will be extremely rare. You would only use get() if you actually measured a bottleneck, changed it, re-tested, and found significant improvement. An iterator will give O(n) time for iterating over any collection. Using get() only works on Lists, and for a LinkedList, gives O(n^2).

  • I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    There is no need for anyone to use 32-bit version anymore.
    Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
    Better support for today's hardware with larger video graphic memory and systems.
    Better memory management.

  • Which table will give vendor master details per company code per purchase o

    Which table will give vendor master details per company code per purchase organisation that is all details available in XK03?

    hi
    Check T code MKVZ
    Or table LFA1
    Vishal...

  • Which table will give the completion timestamp of the last success run?

    Which table will give the completion date timestamp of the last successful execution of an OWB Mapping or Process_flow.?
    I was thinking of using
    select max(RTA_LOAD_DATE|| RTA_LOAD_TIME) from OWBSYS.OWB$WB_RT_AUDIT
    where
    trim(RTA_LOB_NAME) like '%EMP_LOAD1%'
    and
    rta_status = '1'
    But the RTA_LOAD_DATE AND RTA_LOAD_TIME is null
    and RTA_STATUS column is having the value 1 irrespective of whether the JOB has completed or abended
    Please advise??

    Check with these tables :
    <b>coss
    cosl
    cosp</b>
    aufk
    qmat

  • Which one will over right the other - DACL

    If I have configured downloadable ACL on ACS group, then one of the users who is belong to same group has assign particular ACL on his profile.
    Which one will be pushed to the router is it the group ACL or user ACL
    Many Thanks

    Update.....
    I do see in ACS logs that Authentication failed for ACL where username is the ACL name sent by PIX. (#ACSACL#-IP-myACL-45e6c605).
    The failure code is "DACL request from device is not acceptable"
    I guess ACS is denying but WHY?

  • Xsd and dtd: which one will overrule

    Hi,
    if I have both DTD and XSD, and the rules in them are conflicting (say: the DTD indicates that an element is mandatory and the XSD is indicating that the element is optional): which one will overrule?
    Kind regards

    An XML document may have only either a DTD or a schema specified.

  • Have many duplicates, how do I tell which one will become exclamation mark?

    I have a bunch of doubles, but i dont know which ones will turn into the exclaimation mark and which ones are the good ones.
    Is there an easier way to tell with out having to double click on every doubled up song?

    You can collect all your dead tracks together in a playlist, where they can be deleted.
    Using a playlist to collect dead tracks.
    Create new regular playlist – Playlist1
    Select whole library and drag to Playlist1
    Create new Smart Playlist with the rule: Playlist is not Playlist1
    Live updating checked – after you run it, uncheck live updating or you may not be able to delete tracks.
    This playlist should contain all the dead tracks
    http://discussions.apple.com/message.jspa?messageID=5696793#5696793
    Or you can use a Robert Jacobson script - iTunesremovenotfound at:
    http://mysite.verizon.net/teridon/itunesscripts/
    This will delete dead tracks.

  • 2 subscriptions at the same time. Which one will b...

    Hi there,
    Here is my question.
    I have an old 300-minute plan subcription that allows me to call brazilian lines (land lines + celphones).
    I want to keep it, but I would also like to subscribe to a new 100-minute plan so I can call worldwide (over 50 countries/regions)
    My question is , when I call a landline in Brazil, which plan will the minutes be deducted from ?
    I'm asking that because when I call brazilian landlines, I don't want the minutes to be deducted from the 100-minute worldwide plan (which I'd use to call other countries), but from the old "Brazil" 300-minute plan.
    Can someone help me out ?
    Thanks.

    Hi and welcome to the Skype Community,
    Skype will start using the minutes from your older subscription first. So you are all set since you started with the landline only subscription.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Which query will gives the exact one day difference:

    SELECT COUNT(*) AS tot FROM Test WHERE DATETIME BETWEEN TO_DATE('01/01/2012 12:00:00 AM', 'DD/MM/YYYY hh:mi:ss am') AND TO_DATE('01/02/2012 11:59:59 PM', 'DD/MM/YYYY hh:mi:ss am')
    SELECT COUNT(*) AS tot FROM Test WHERE DATETIME BETWEEN TO_DATE('01/01/2012 00:00:00 AM', 'DD/MM/YYYY hh:mi:ss am') AND TO_DATE('01/01/2012 11:59:59 PM', 'DD/MM/YYYY hh:mi:ss am')

    hI,
    First lets assume that you did not mean to have the 1-feb-2012 in the last date of the first select.
    SELECT COUNT(*) AS tot FROM Test WHERE DATETIME BETWEEN TO_DATE('01/01/2012 12:00:00 AM', 'DD/MM/YYYY hh:mi:ss am') AND
    TO_DATE('01/02/2012 11:59:59 PM', 'DD/MM/YYYY hh:mi:ss am')
    --           XXBut you want 1-jan-2012.
    Then I would not use between for this but trunc for beter readability like:
    TAB AS
    select to_date('2012/01/01 00:00:00', 'YYYY/MM/DD HH24:MI:SS') DATETIME FROM DUAL union all
    select to_date('2012/01/01 12:17:22', 'YYYY/MM/DD HH24:MI:SS') DATETIME FROM DUAL union all
    select to_date('2012/01/01 23:59:59', 'YYYY/MM/DD HH24:MI:SS') DATETIME FROM DUAL union all
    select to_date('2012/01/02 00:00:00', 'YYYY/MM/DD HH24:MI:SS') DATETIME FROM DUAL union all
    select to_date('2012/01/02 12:17:21', 'YYYY/MM/DD HH24:MI:SS') DATETIME FROM DUAL
    SELECT
      TO_CHAR(DATETIME,'YYYY/MM/DD HH24:MI:SS') DATETIME
    FROM
      TAB
    WHERE
      TRUNC(DATETIME) = to_date('2012/01/01', 'YYYY/MM/DD')
    ;You may look into an function based index on trunc(datetime) for preformance
    Regards,
    Peter

Maybe you are looking for