Which String method would be used to...

Which string method (maybe it's not even a string method) would be used to change user input for example from:
User input: Brandon Bell
Changed to Bell, Brandon
Thanks.
Brandon Bell

Which string method (maybe it's not even a string
method) would be used to change user input for
example from:
User input: Brandon Bell
Changed to Bell, Brandon
Your question is very vague. What are the exact requirements? Are you assuming that the inputted string is a first name and a last name, separated by a space, and you want to change it to last name comma first name?
If so, the methods indexOf and substring will be enough for a first, naive implementation. With that in place you might want to ask yourself:
Will you allow the first name to have one or more spaces? Will you allow the last name to have one or more spaces? Etc, etc.

Similar Messages

ISE 1.3 and wireless - which certification method would be best....

Scenario:
From the firewall perspective we have two ISE nodes on the internal network running as admin/monitoring primary and a secondary and both as PSNs. WLC is also on the inside however it has an interface for guest/untrusted device access which is going straight through to the internet, the DG being an interface on the firewall that is considered less secure.
There are two SSIDs, one using MAB for CWA and another using dot1x for user auth against an internal AD:
The CWA SSID is using that guest interface on the WLC which goes to the firewall and DHCP is being handed out by a server on that side of the network too, the DNS server being used is public one. The Authz profile has been configured to use a static IP instead of the hostname as the public DNS will not resolve it. A rule was configured on the firewall to allow access to the ISE server on port 8443 for the guest portal.
On the dot1xx SSID of things it's been configured to use PEAP and mschapv2 and requires an AD username and password to authenticate.
Query
Considering the CWA SSID uses an IP address for the server and the dotx use the hostnames of the server what would be the best way to rsolve certificate trust issues and what would be best to put in the CN and SANs. one wildacard certs seems like the way to go but not sure if this is going to be the best method with the Guest CWA using an IP.
interested in what your thoughts are on this...

Thanks Mark, this is essentially what I ended up doing. I setup a new SSID to onboard the devices which I force them to a sponsored guest type of portal. I ask them for AD credentials and then use the native supplicant to configure an EAP-TLS connection to the proper SSID.
I did find out, from Cisco TAC, there is a new way to identify what VLAN the user should be put on. This is done in the Auth Profile. You can use the directive "Airespace-Wlan-ID"
In the provisioning process, I profile the device and check if it's a corporate asset or BYOD then I check to see if it belongs to the proper AD group, it gets a specific provisioning profile which includes the proper SSID for the vlan they want to connect to. I then created a wlan for each of the vlans and attached it to the right interface on the WLC. I created appropriate ACLs on the WLC then I named those ACL's in the Authorization proile.
When the user goes through the provisioning process, they will be put on the proper WLAN based on AD membership and the type of device. Only EAP-TLS connections are allowed on the Corp/Demo and BYOD networks.
If user1 belongs to the Demo and BYOD AD Groups, their laptop will provision on the Demo Network and their IPhone will provision on the BYOD.
The only gotcha is that if the user wants to change from one network to another, they need to re-provision their device.

...? Poll ?... Which Import method do you use?

LR has 4 different ways of Importing images.
Which way do you bring in new images...and why that way?
My personal preference is to refer to existing folder/file trees but this would screw up things as I move images from hard drive to CD/DVDs.

1. Connect camera (Canon) with USB to PC.
2. EOS Utility opens and download automatically the photos to a folder on PC which is also the "Watched Photos Folder" of Lightroom.
3. I open Lightroom at same time and import starts automatically and put the files into the "Auto Imported Folder" which I "see" in Lightroom. One preset I use during import and that is renaming the files to YYYYMMDD_HHMMSS format.
4. I edit and sort the photos in one go.
...in the meantime I have still my originals on the CF card as backup...
5. Adding Keywords, Title, Locations and Copyright.
6. "Copy" the photos into Collections.
7. Move inside Lightroom the photos out of the work folder (Auto Imported Folder) to existing folders (based on the event name).
8. Convert to DNG.
9. Backup using SyncToy 2.0 to an external 2Tb-drive.
10. Formating the CF card(s).

*Noob* Which of these would I use for a scratch disk? How much Ram?

Hello, I am fairly new to Photoshop as I have used Lightroom ever since I've been a photographer. I recently got into Photoshop with the cloud as well as layering multiple exposures together. I never KNEW anything about scratch disk, until yesterday.
First let me stress, please answer my questions in layman's terms. I search the net before I start a topic on a forum and I read a lot of answers that seem to be responding to people who have a general idea of what is already going on. Remember, I DO NOT. Here are my questions:
A:If the scratch disk acts like RAM, do I need to allow it to use any of my ram at all? If so, how much? I have two Macbook Pro's, they are the highest model Apple makes, both have SSD drives, Quad Core i7's, etc. I unchecked my Macbook hard drive and told it to use an external SSD drive that is plugged in via USB 3.0. Would it be better to use an HDD instead of SDD? I have lots of hard drives to choose from due to being a music producer.
B:When I exit the program does it delete all the data it created? This question is two fold, does it delete it regardless if I saved the project or not? If I save the project does it stay there? What if I delete the original photo, was the photo imported into photoshop upon camera raw?
C: Like question A, how much ram do I choose? I have 16GB of Ram in each of my MacBooks.

OK, I have now copied your hillbilly text and pasted it into a text editor to change the typeface so I can read it.
I'll try to address the lose ends here.
A:…I have two Macbook Pro's, they are the highest model Apple makes…
Please forgive me for not being impressed. I just happen to consider any laptop a sub-optimal choice for Photoshop photography work. My personal opinion. (Please don't ask me why.)
, both have SSD drives,… I unchecked my Macbook hard drive and told it to use an external SSD drive that is plugged in via USB 3.0. Would it be better to use an HDD instead of SDD?…
I assume you are talking about using the external drive as your primary scratch disk, not as your boot disk. That is the appropriate thing to do. HD or SSD will both do the job fine, as long as they're physically separate, dedicated Photoshop scratch disks.
Obviously the internal drive will be your boot disk. Adobe applications really like to reside on the boot disk, the drive where the OS resides.
B:When I exit the program does it delete all the data it created?
This question is two fold, does it delete it regardless if I saved the project or not?
If I save the project does it stay there? What if I delete the original photo, was the photo imported into photoshop upon camera raw?
NOTHING is ever imported into Photoshop, ever. You use Photoshop to open your files exactly where you put them in the Apple Finder. And you save them wherever you wish, in the Finder as well. Your images will always reside in the Finder.
You don't import files into Adobe Camera Raw either. You open them in or with ACR.
Of course you need to save your data, not only when you quit the application, but at frequent intervals while you're working on it. Nothing you saved will be deleted by Photoshop. How can you even conceive and ask such a question? ?? !
If you ever try to close a file or the application when you have open, unsaved files, the application will ask you for confirmation in an unmistakable way.
Your images will always reside in the Finder, wherever you put them.
Photoshop does not have the abominable "Libraries" scheme that made me detest Lightroom when I tried it. Nor does Photoshop hide your image files in "packages" like the even more abominable iPhoto does.
Please forget anything you may be accustomed to in Lightroom and/or iPhoto, and approach Photoshop with a fresh mind, respecting it like the granddaddy of image editors it is.
C: Like question A, how much ram do I choose? I have 16GB of Ram in each of my MacBooks.
Again, you don't "choose RAM", instead you select a percentage of dynamically changing Available Memory (not RAM; see above) to allow Photoshop to use. Leave at around 70%.
Please see the following post for an important tip.

Urgent!!! Problem on the String method and File method

I would like to ask two questions:
(1) From the String method, it can use .equals() method to compare two strings whether two string exactly equal or not. But what method can i use to compare two strings see whether any words exists in the string?
(2) From the following code,
Java.io.File outFile = new java.io.File("TestProg.java");If i would like to use a variable (e.g. let the variable be name) instead of the filename "TestProg.java", do you know how to revise the above code??
If i write as following, is it correct???
Java.io.File outFile = new java.io.File(""+name+"");Please help!!!

1- To check whether a word (sunstring) exists in a longer string, you can use the following String method:
indexOf(substring) on the string that you are searching. If the word does not exist, -1 is returned.
2- yes you can provide a variable (of type string) in the constrcutor of File.

Which encryption method is the best way to secure the data tranfer

Hi ,
I want to configure the Encryption between two cisco Wan routers(3845 & 3825).
We use 50MB leased line connection and transfer the data. I also configured the QOS to limit the data transfer rate to 20MB on the same pipe and it's working fine.We also use the same pipe for trading purpose too. That's why I limit 20MB for data(copy) transfer between two hosts.
Which encryption method should I use to secure the data transfer?
Plese kinldy advise .
Thanks,

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I would recommend AES256.
I would also recommend a VTI tunnel vs. GRE/IPSec. However, both, depending on your IOS, should support AES256.
Encryption will demand more from your routers. I think the 3845 should be able to support 20 Mbps encrypted, not as sure about the 3825. (BTW, if you have 50 Mbps LL, why are you limited transfer rate to 20 Mbps?)
Also BTW, there's much involved in setting up encrypted tunnels for optimal performance. Also see: http://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/25885-pmtud-ipfrag.html

What api would I use to get the number of chars in string?

What api would I use to get the number of chars in string?

Assuming that you really mean that you want the number of charaters in a String (not string), that would be documented in java.lang.String
The method is length()

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

HT1296 My I-Phone has music on it that was synced from an I-Tunes library from a previous computer (which is no longer in use) AND purchases from the I-Tunes store. I would now like to transfer ALL of that music (not just the purchases from the I-Tunes s

My I-Phone has music on it that was synced from an I-Tunes library from a previous computer (which is no longer in use) AND purchases from the I-Tunes store. I would now like to transfer ALL of that music (not just the purchases from the I-Tunes store) into the I-Tunes library that I've established on a new computer.
Can that be done, and how (I've attempted without any success)?
Any assistance would be GREATLY appreciated!!

Contact iTunes support and explain your situation to them. They may let you redownload it at no cost.
http://www.apple.com/support/itunes/contact.html
If they don't, I'm afraid you'll have to purchase it again. Sorry.
B-rock

Which extraction methods are used for extracting AR , AP, GL , cost centre

which extraction methods are used for extracting AR , AP, GL, cost centre account   data from R/3 system.
please let me know what type of extraction we use...generic or FISL.... OR COPA
ON WHAT SCENARIOS WE USE THIS EXTRACTIONS..
if any have documents on it please email...please send an email    documents ..
to [email protected]
iam bit confused with sap help...
will reward full points
please reply

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

Forced me to do a little research.
DBCC SQLPERF(logspace)
See also
http://stackoverflow.com/questions/198343/how-can-i-get-the-size-of-the-transaction-log-in-sql-2005-programmatically
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Which interface would you use to list each element of a vector?

Which interface would you use to list each element of a vector?

The laugh's on you, twit! Nobody takes kindly to lazy bums trying to cheat on their homework nor exams. Take a hike loser!

Which EAP Method to Use?

Hi.
We are looking to implement 802.1x on our Wireless Network. I need to support Windows XP and above, Apple Macs (maybe iPhones, etc) and some Linux.
I would have liked to have used PEAP with EAP-MSCHAPv2, however I am stuck with ACS 4.2 backended into LDAP (Oracle IDM) and this won't support MSCHAPv2.
We don't really want to spend anything on supplicants, so I'd like to know what method would be best for the spread of clients we have to support.
Thanks
Matthew

Matthew:
I think you knew the answer, that is why you mentioned that you don't wana spend anything on the client side
Unfortunately, you will need to use EAP-GTC (Generic Token Card) method in order to work with LDAP integrated withradius server.
Cisco PEAP uses EAP-GTC although this only works in wireless environment and Microsoft PEAP uses EAP-MSCHAPv2.
Acs supports both the methods so only option here is to use GTC supplicant on the client side.
In order to enable EAP-GTC, you can use either one of them:
Cisco350card
Cisco ACU utility
HTH
Regards,
JK
Plz rate helpful posts-

Which statement would you use to confirm a transaction?

Which statement would you use to confirm a transaction?
a. COMMIT TRANSACTION
b. ROLLBACK TRANSACTION
c. CHECK TRANSACTION
d. VIEW TRANSACTION

a.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Which java keyword cannot be used inside the body of a static method?

Which java keyword cannot be used inside the body of a static method, but may be used without problems in a non-static method?

But javac doesn't complain. So I was not partially wrong -- I was completely wrong.It's still better not to use the "this", though. When you explictly reference a static member via an instance reference (theFoo.bar or this.bar, as opposed to Foo.bar) the JLS requires a check that the reference is non-null. Clearly "this" is always non-null, but javac still puts in half of the check. Take the simple class public class Test {
    static int field;
    public void setField(int i) {this.field=i;}
    public void staticSetField(int i) {field=i;}
} and observe the bytecodes produced: $ javap -c Test
Compiled from "Test.java"
public class Test extends java.lang.Object{
static int field;
public Test();
Code:
   0:   aload_0
   1:   invokespecial   #1; //Method java/lang/Object."<init>":()V
   4:   return
public void setField(int);
Code:
   0:   aload_0
   1:   pop
   2:   iload_1
   3:   putstatic       #2; //Field field:I
   6:   return
public void staticSetField(int);
Code:
   0:   iload_1
   1:   putstatic       #2; //Field field:I
   4:   return
}The JIT will get rid of it, but you may as well avoid the waste in the first place. (And if you really do want to check that the reference is non-null, do the check explicitly so that maintainers know it's intentional).

Which String method would be used to...

Similar Messages

Maybe you are looking for