Which tables to use for Project Status Report in CR2008 accessing R/3 data?

I am working on a Project Status Report on a WBS in Crystal Report 2008 that is accessing data from a R/3 system level that will provide me the following fields:
1) Purchased Hours
2) Billed Hours
3) Non-Billed Hours
4) Credit Memo
5) Remaining Hours
The report will be displayed at the WBS level (grouped at WBS level) but will also list the different activities under each WBS.
Can anyone help me identify which tables and fields I need to be working with? This is how the report will look like:
CustID ProjectID PlantID WBS# Activity# PurchasedHours BilledHours Non-BilledHours CreditMemos RemainingHours
Please help.
Regards.
-Rohit
Edited by: RohitBora on Feb 2, 2012 5:59 AM

If you are using Business One then please post to that forum. CR 2008 is an OEM build for B1 so they support it in that forum.
Don

Similar Messages

Which tables are used for Quality Efficiency calculation of OEE report ?

Hello,
We're confirming OEE report behavior.
I'd like to know OEE report and ME table specification.
Which tables are used for Quality Efficiency calculation of OEE report ?
According to I know, the definition of Quality Efficiency is (complete qty) / (start qty).
For this calculation, does OEE report just use qty_started and qty_completed of PRODUCTION_LOG table?
If any other tables/columns/logic are implemented, your information is appreciated.
Best Regards,
Takahiro Uesugi

hi
Go to BSIS & BSAS
BKPF
SKA1
SKAT
SKB1
Regards
Roobal

What is table field name for order status report of rate per unit and bal

hi i want to make FS for order status report i almost get all table and field but i don't get only two field rate per unit and balance value table field didn't get please help me searching in field and table
i want to develop my status report

Hi,
Check tables VBAK and VBAP wherein you will get all header and item details.
VBUK and VBUP for header and line item statuses.
KONV would give you rates/pricing details for each condition type determines in the sales order.
VBAK-KNUMV = KONV-KNUMV is how you relate both of them.
Hope that helps.
Regards,
Amit

Choosing which table is used for results

To make this simple I am going to use two dimension tables and one fact table.
If you were to have two dimension tables. One for Country and one for Region.
Then you have one fact table which shows transactions at the Region Level, but Country is also in the PK for the table. So there is a join from Country to F1 and another from Region to F1.
When I select Country and Region in my query and no fact, it is using the fact table to get the results. The problem with this is that if there are no transactions for a given Region then the data does not exist. I would like the result to pull from the Country Dimension for Country and the Region Dimension for Region.
Any help is greatly appreciated.

Hi user10800227,
So if I understand your situation correctly, you have the following going on:
TABLES)
COUNTRY_DIM
REGION_DIM
FACT
JOINS)
REGION_DIM.F1 1-to-many FACT.F1 many-to-one COUNTRY_DIM.F1 (INNER JOINS)
In your report, you pull one field from COUNTRY_DIM and one field from REGION_DIM.
Assuming that the above is correct, then what you are seeing is the right behavior. Each Answer Request is sent out as a single query. So when you pull a field from REGION_DIM and COUNTRY_DIM, OBIEE has to find a way to join those two tables together in a single query. Based on the metadata you setup in the RPD, OBIEE sees that the proper way to relate a REGION_DIM record to a COUNTRY_DIM record is through the FACT table. So when it generates SQL it joins REGION_DIM to the FACT, and the FACT to COUNTRY_DIM. Hence, if all your joins are inner joins, then if there are no transactions for a given COUNTRY&REGION combination, you won't see it in your list.
If you want to see all the data points, you might want to make that join an outer join in the repository.
Your other option is to use Nico's data densification technique. Visit this link for details: http://gerardnico.com/wiki/dat/obiee/logical_sql/obiee_sql_densification
Good luck and if you found this post useful, please award points!
Best regards,
-Joe

Which Tables are used for   RequestForQuatation(RFQ),MM

Hi Gurus,
When i have created RFQ number, where it holds and
TABLES used for RFQ
could anyone tel me..............
Thanks in Advance.
Edited by: siva kumar kasa on Oct 22, 2008 8:41 AM

HI
Check with the following Tables :
EKKN      - Account Assignment in Purchasing Document
EKKO      - Purchasing Document Header
EKPO      - Purchasing Document Item
Thanks & Regards,
Senthil

Which table MIGO use for schedule planning?

Hello,
I have one schedule planning which contains 50 items. When I go to MIGO, I choose the schedule planning, but I just see 32 items. I guess some materials are processed before.
I need to get this 32 items into an internal table but I can not find the right table name.
I tried MSEG, EKKO, EKET but didnt have the right result. Any ideas?

Any inputs on this please?
I am trying myself too
Thanks

Project Status Report - cProjects 4.0 - Run time error

Under Basic Settings, I go to 'Forms for Printing and for Project Status Reports'. Here, under 'Create PDF-Based Forms', I select the form 'DPR_STATUS_REPORT_AIF' and Activate it. I then get to 'Activate Forms per project type'.I get to 'New Entries' and add 'DPR_STATUS_REPORT_AIF' and also set the 'Active' and 'Status Rpt' checked.
When I get to cProjects front end, I see the 'Project Status Report' template under the 'Status Report' tab. However, when I click on the 'Preview' button, I get to see a dump.
"The following error text was processed in the system SRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101)"
Can someone please suggest how to get something useful at the click of the preview button?
Thanks.

Hi,
Yes your basis team should tell you more about this. ADS Credential needs to be installed on the java stack of your cProjects Server. For this you will have to send a message to SAP requesting for the ADS Credential. You will then receive a credential file with its password.
However not all servers support ADS. There is a list of server names that support ADS. You can get the server name on which cProjects is installed from your basis team and I shall let you know if it is supported or not. You can also have a look at in the PAM (Product availability Matrix) for SAP NetWeaver 2004s - Additional Components at http://service.sap.com/pam
Regards,
Reema.
Pl award all useful answers.

Project Status Report using CATSPS. Billable/Non-billable Hours?

I am working on a Project Status Report and am using CATSPS table instead of CATSDB table since thatu2019s the cross-application table for PS module. But I am facing a small problem in using CATSPS table. There is no field in CATSPS table that tells me if the hours are billable or non-billable. Table CATSDB had a field u201CBill Typeu201D (Billable/Non-Billable) but I donu2019t see anything like that in CATSPS. If I use CATSDB table and filter out status "30" for only approved hours, I am getting duplicate entries for actual hours in Crystal Report 2008. What is the correct table to be used in this case and also what is the mapping field(s).
Also, looking to display the billing type for the document in VBRP table. I am able to display the document type code but not the description itself. Which table will have this mapping?
Also, in Crystal I have the total Purchased hours at the 3rd level WBS but the total actual hours are coming from the 4th level WBS (Activity level). Each 3rd level WBS can have multiple 4th level WBS (difference networks). How do I know (logic) which 4th level WBS total to pick up and add to which 3rd level WBS total? Also, how do I display the total actual work hours form the 4th level WBS to display at the 3rd level?
Here is an example:
WBS , Level , SKU# , Network# , Activity# ,   Purch. Hours , Act. Bill. Hours , Remaining Hours
EP-2927-AMB-0001 , 3 , 600-310-100000 , N/A , N/A , 100.00 , N/A , 55.00 (=100.00 - (30.00+15.00))
(Purchase Hours from this line) - Total Act. Bill. Hours from level(s) 4 below: A+B)
EP-2927-AMB-00011 , 4 , N/A , 000004008303 , 10 , N/A , 5.00 , N/A
EP-2927-AMB-00011 , 4 , N/A , 000004008303 , 20 , N/A , 6.00 , N/A
EP-2927-AMB-00011 , 4 , N/A , 000004008303 , 30 , N/A , 15.00 , N/A
EP-2927-AMB-00011 , 4 , N/A , 000004008303 , 40 , N/A , 4.00 , N/A
(A)    Total Billable Hours = 30.00 (5.006.0015.00+4.00)
EP-2927-AMB-00012 , 4 , N/A , 000004008304 , 10 , N/A , 6.00 , N/A
EP-2927-AMB-00012 , 4 , N/A , 000004008304 , 20 , N/A , 4.00 , N/A
EP-2927-AMB-00012 , 4 , N/A , 000004008304 , 30 , N/A , 5.00 , N/A
(B)    Total Billable Hours = 15.00 (6.004.005.00)
If you notice there are two level 4 WBS (EP-2927-AMB-00011 & EP-2927-AMB-00012) in this example that are under level 3 WBS (EP-2927-AMB-0001). The Purchased Hours are coming from level 3 which means the hours are assigned per project at the WBS 3 level. Within each project there are different activity levels where actual hours worked by each employee are coming from. I need to sum the actual hours from all the available level 4 WBS and bring them over to the corresponding level 3 WBS in order to calculate the remaining hours. My challenge is how do I know which level 4 WBS belong to which level 3 WBS since there are more than one level 3 WBS in a Project and each level 3 WBS can have multiple level 4 WBS?
Please advise.
Regards.
-Rohit
Edited by: RohitBora on Feb 27, 2012 8:40 AM
Edited by: RohitBora on Feb 27, 2012 7:27 PM

Hi,
My personal suggestion to you is try to describe problem very crisp and easy to understand so that you will get quick responses. Its very difficult to read and pin point what you are aksing and finally you will miss readers attentions.
As standard practice, hours planned at indiviudal activity level and actual costs posted on each indiviudal activity will roll up and display the aggregate values at corresponding higher WBS element level. At the same time system will let you know reamining hours at indiviudal level and not higher level as rolled up.
Your WBS structuure is bit confusing me, in what way you are encoutring problem in identitying level 3 and level 4 WBS elements. Key will clearly denotes which is level 3 and level 4. As cited by you, EP-2927-AMB-0001 this should be level 3 and EP-2927-AMB-00011 is level 4. I am sorry to say that structure key was not maintained proper way and bit confusing.
Regards,
PSR
Edited by: PSR on Feb 27, 2012 11:05 PM

Project Status Reports for cProjects 4.0

Hi Experts,
Does anyone have a document in which functionalities of Project Status Reports are detailed?
I would want to know which kind of data can be extracted from projects and if operations like sum, substraction, aggregation, grouping can be made in these reports...
In addition, if you had some documents about how a Project Status Report looks like it would be also good to have.
Please send the documents to: [email protected]
Of course, reward points will be given for all useful answer...
Thank you all in advance.
Kind Regards,
Isabel

Hi Yasar,
Thank you very much for your document, although that is not really what I was looking for.
I need to design a Project Status Report, so I want to know how does it work, which data does it use (which is the data that can be reported and which data can't), if you can select the data to appear or group it by some attributes, if the manual comments can be inserted attached to each of the data reported (comments related to all phases reported).
So I still need some further details on this (version 4.0 with AIF documents).
Thank you very much!
Kind regards,
Isabel

Cannot see project status report pdf inside cprojects using Firefox

Hi,
I am using firefox software to view project status report in cprojects. It shows me blank.
But if I view Approval document, the pdf shows correct in the browser.
As you might be aware,Please note these pdf reports display inside the webpage area,so please donot reply with solutions of opening pdf in separate browser window etc.
Please help

Hi,
Are you able to open any other pdf forms in cProjects. for eg. approval document?
I guess you need to get the exact location of error.
After the system gives a dump, run transaction ST22 and get the program/function name where the error is actaully occuring.
Regards,
Reema.
PS. pl. award points to all useful answers.

Is there a custom function available which can be used for logging errors captured in a sp in a sql table

Is there a custom function available which can be used for logging errors captured in a sp during and after execution in a sql table?
Basically we would like to utilize such function in every sp and log errors of each sp in a error log table
Mudassar

Thanks .
I was able to write this however I am thinking I am missing something
CREATE FUNCTION testfunction1()
RETURNS @temp_error TABLE (
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
AS
BEGIN
insert @temp_error(procedure_name,line_number,error_number,error_message,error_state,error_severity)
select error_procedure(),error_line(),error_number(),error_message(),error_state(),error_severity()
RETURN;
END;
CREATE TYPE test_type AS TABLE(
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
GO
create proc usp_error_test
@test_type AS test_type READONLY
as
begin
begin try
select 1/0
end try
begin catch
select * from testfunction1(@test_type)
end catch
end
Mudassar

What r all the tables used for the following report

hai
what r all the tables used for the following report
report:

Report that displays all the late shipments in a particular period of time
send important fields for this tables also
thanks in advance.

Hi,
Imp table are vttk,vttp,vtts.
Regards
Amole

Project Status Report in MS Power Point

Hi Experts!
I am very new to Project Systems. Our requirement is to create a Project Status Report. This report should be generated in MS Power Point which should be editable.
Do we have any standard reports or test reports for the same? Can someone give some pointers for the same? Your help is highly appreciable.
Thanks a lot.

Try convincing your client saying that this is absolutely not possible in standard SAP. However also let the client know about other alternative stating that standard SAP reports can be downloaded to Excel which then can be used as a reference to create a power point presentation. This, though, can be done manually only.

Gantt Chart in Project Status Report

Hi Folks,
We are doing a custom development and creating our own Project Status Report PDF form. Is there a way (standard FM or otherwise) to generate a Gantt chart and show it on the PDF form.
The Gantt chart itself is not of the whole project structure. It is only the phases. Most projects will have 4-5 phases maximum. The Gantt chart also does not need to be too sophisticated, we just need a high level graphical representation of the phase timelines.
Let me know if my question is not clear and I can elaborate.
Thanks
Lashan

Hello Lashan,
Building the Gantt chart in a PDF report is quite tricky. The Gantt chart view you see in cProjects is a different SAP component, JGantt (developed in Java), which is connected to the system.
Adobe forms don't have a standard Gantt element, so you'll have to render it somewhere else and send it to the form in a binary format.
For creating and rendering the graphic you can use the SAP IGS (Internet Graphics Service).
You can find some details here: http://help.sap.com/saphelp_nw04s/helpdata/en/17/86c039c7811f11e10000000a114084/content.htm
This is a little bit more complicated, you also need to use iXML libraries to transform all the Gantt data into the IGS required format.
The end result will not really look like the Gantt view, but it will contain all necessary information:
Is this the kind of graphic you need to develop?
Cheers,
Tudor

CProjects 4.0 - Project Status Report

Hi All,
I am using cProjects 4.0
Under SPRO, I get to "cProjects > Basic Settings > Forms for Printing and Project Status Report".
Please list out the sequence of activities to enable me get and use Project Status Report from the front end. A detailed response would be highly appreciated.
I tried a few things which aren't quite working
Thanks very much.

Hi Bittu,
Go to SPRO
-> cProjects->Basic settings->Templates for Printing and for Project Status->Create Temples and then Activate Templates per Project type
After the above settings are done, the Project status report from the front end is enabled and you can view them in cProjects.
Wish you much success.
Bye Dudle

Which tables to use for Project Status Report in CR2008 accessing R/3 data?

Similar Messages

Maybe you are looking for