Which trigger i should use to display the values
Hi all,
Assume there are four fields in my forms coming from the same table i.e empno,empname,depno,salary.In which empno is LOV which displays all the employee names whenever i select the empname from the list the form should automatically fill empno,depno,salary fields which form trigger i can use here....
The Column Mapping Properties in the LOV's property palette allows you to select a return item for each column displayed in the LOV. This will do what you want, there is no trigger involved. If you want a value to be returned but not visible in the LOV then set the column width in the LOV to zero.
Similar Messages
-
I have an iPhone in my name and my wife has an iPad in her name. We have just ordered an iMac and wondered which account we should use to get the best out of all the devices? Can we use both accounts in iCloud?
Yes you can. However, it is better to use one person's account most of the time for purchases in the Mac App Store and iTunes since you can share purchases, such as songs, among various devices using the SAME account. You Cannot share purchases among different accounts, though. So make one of your accounts the main "purchasing" account so you can share purchases.
Hope this helps -
What should the default program be for downloading this type of file? How can I get Firefox to download these without asking me which program to use?
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
What Component should be used to display the list on UI
Hi All,
I have a table in which when the user selects a row and tries to remove the row. I am supposed to show the pop up which shows all the rows matching to the header of the row.
In my backing bean i have the context of the row so i could extract the matching rows form db into a List<String> . Now what i need to know is which component on the Ui will show this as a list in Pop Up.
I mean which component af:??? should be used to display the List ?
I am kind of new to ADF.
Regards,
SharmainputComboboxListOfValues
selectOneChoice
inputListOfValues -
which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use this for hometheater and HD movies.
Intel HD 3000 graphics card can easily handle HD movies up to 1080p. But if you are looking at higher resolutions possibly 4k or 8k that are being released this summer in new TV's, I would go with the AMD card. The AMD card would be good for video and picture applications and also games. But if this is strictly to power your 1080p home theater setup then the choice is obviously the Intel HD 3000.
-
In which trigger can i use go_item() in oracle forms 6i?
Hi,
I have a problem with go_item.
I tried executing go_item() in triggers like key_next_item, pre_text_item, post_text_item & when_validate_item.
But none of them seemed to be working.
I searched for other possibilities in the site, where i found a solution of using trigger ' when_timer_expired ' with ' when_validate_item ' ,
but when i tried to create trigger, i did not find that trigger (when_timer_expired) in the list at all.
I'm using oracle form builder 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production.
A trigger with go_item() must be created when tab is pressed.
In which trigger can i use go_item() ??
Thank You.from help:
Restricted Built-in Subprograms
Restricted Built-ins affect navigation in your form, either external screen navigation, or internal navigation. You can call these Built-ins only from triggers while no internal navigation is occurring.
Restricted Built-ins cannot be called from the Pre and Post triggers, which fire when Oracle Forms is navigating from object to another.
Restricted Built-ins can be called from the When triggers that are specific to interface items, such as When-Button-Pressed or When-Checkbox-Changed. Restricted Built-ins can also be called from any of the When-New-"object"-Instance triggers and from key triggers.
Unrestricted Built-ins do not affect logical or physical navigation and can be called from any trigger.
The Built-in descriptions include a heading, Built-In Type, that indicates if the Built-in is restricted or unrestricted. -
Which iPad Retina should I buy in the US so it will work in the UK?
I am going to the States next month and want to buy the new iPad there. Which iPad Retina should I buy in the US so it will work in the UK, the AT&T or Verizon model? I'm probably staying with O2, but can't tell if different models are sold in the UK, or if its just the one. If just the one, I can't find which model number it is for the UK. The apple store website isn't exactly clear on which model(s) is/are sold in the UK.
Hi,
We don't have cellular, but I have often read many ques. and answers here just for my own info when we were first buying. I do know that in the past, Verizon had a different system than ATT and others. That could all have changed with LTE. I checked a couple of articles and found the following links which might help you. PLEASE NOTE these were published in March and May of 2012, so things might have changed with the new ipad 4. Also note that you can buy a cellular here without a contract that you could then set up with your own UK phone company.
http://www.tomshardware.com/news/Apple-iPad-UK-4G-LTE-Australia,15634.html May 15, 2012
http://apple.stackexchange.com/questions/43972/are-the-new-ipads-ipad-3-for-sale -in-the-us-unlocked-for-the-uk Mar. 2012
You also said you wanted retina display and then said you were probably staying with 02. If by that you mean the ipad 2, I want to let you know that the ipad 2 does NOT have the retina display. That would mean you'd have to get the old discontinued 'new' ipad or the ipad 4. And if I were you, I would not even think of buying an old 'new ipad, even if there's a great sale on them. I'd go straight to the ipad 4.
Make sure you do as much research as possible.
Hope this helps. -
Which tool i should use to develope a portal
Hi all,
we are planning to develop a portal which we will expose to internet.
Now my question is which tool i should use to develope this
1.BSP
2. jspdynpage
3.Webdynpro java
4.Webdynpro abap
Which application will perform better on internet.
Lots of rfc calls and webservice calls are there.
plz give me suggestions .
Thanks
developerHi,
BSP - Abap workbench
JSP Dynpages - NWDS (Netweaver Dev Studio)
Webdynpro Java - NWDS
Webdynpro ABAP - ABAP Workbench
above all applications will perform at same level depend on the content.
best regards
Hari -
Which protocol we should use for file transfer in ios ?
which protocol we should use for file transfer in ios ?
My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.
-
I am using a combo box as a select list for text serial commands. I have items like "engineering", "GUI", and "Scan" for the commands "MDE", "MDN", and MDS respectively which i have input as the corresponding value in the combo box. so for example the label "engineering" has the value "MDE" in the combo box items list. when the Vi starts it needs to read the current value MDE, MDN, or MDS and then i want it to display on the front panel the item text corresponding to that command value.
To do this i have tried to read the serial command, ie MDS and then wire that to a "value" property of a property node of the combo-box, but instead of displaying the corresponding item label, "Scan", it displays the value "MDS" on the front panel instead. i want the front panel to use the label text when choosing and displaying but the block diagram to use the serial commands. Can this be done with a combo box? I'm trying to use a combo box so i can keep it all text and avoid having to build a case statement to convert enums or rings from a numerical value to the text command.
The correct text value is wired to the value property and it does exist in the combo-box. I have unchecked "values match items" and selected to not allow undefined values.Don't use the value property node. Use the Text.Text property node. When creating the property node, select Text, then in the next pop-up box, select Text.
- tbob
Inventor of the WORM Global -
In which situations we should use Character Mode Reports?
Question: In which situations we should use Character Mode Reports?
Explaination: I am faced with a certain situation. I feel that I should develop reports in Character Mode. But I am not sure about this.
I invite all readers to contribute on the subject matter. Once I receive responses, I will explain my specific situation as writing it now may narrow the list of such situations.
Also I would like to know what problems we face when developing reports in Character Mode. I was developing my first Character Mode report and I faced layering problems. So I would like to know more such precautions.
TIA
TariqHi Muhammad,
There's any number of cases for using character mode Reports. However, they all typically come down to what your doing with the output of the report.
Basically, you need character mode reports whenever the Report output needs to be read by some sort of Ascii file reader. This could be notepad, VI, MSVC, dot matrix or fixed character set printers, ...
A less common case is where you just want to get at the data within the report. You're just using the ascii output as a data dump to pass through to another program/utility. (This is really just a specialised case of the previous one).
There are some cases where character mode output may be one of several choices. Eg: the body of an email message which could be HTML or plain text.
Robin. -
Which Function Module is used for converting the DATE in BDC
HI,
Which Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.data : date like sy-datum.
data : odate(10) type c.
date = sy-datum. " in format YYYYMMDD
CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
EXPORTING
input = date
IMPORTING
OUTPUT = odate .
write:/ odate. "in ur format '.
1.
In ur itab make a field for date as 10 characters and use this Fm to store the date .
2. Pass the date as the charcter field to the screen and now check . -
JDEV 10G: how to display the value of the line chart using jChart in JSP
I have draw the line chart in JSP using the JChart and now I wan to display the value label in the line there..
but the value wasn't show..
anyone can help me..
thx..Hi,
what I do understand, you want to display the value of each point in your Line Graph.
I guess you will be having BIGraph.xml file. In this file check the "Show Data Tips When Mouse is over bars" checkbox.
Lets try with this.
--Abhijit -
Which Listener I should use if I drag and Drop an image/icon into a JPanel?
Dar Friends:
Happy new year.
I try to drag and Drop an image/icon into a JPanel, and hope I can immediately detect it after DND,
Which Listener I should use in this JPanel if I drag and Drop an image/icon into a JPanel??
ThanksThank camickr .
I can dnd an image into a JPanel called JPanelOld already, I hope to use another JPanel or JTree to listen to any Dropped Image in JPanelOld later on so I can take some action in another JPanel or JTree.
so what kind of Listener I should use for my purpose??
where to add this Listeners??
Happy New Year. -
How can i know which index will be used when executing the query ?
1 ) I have query in which i have 3-4 tables but there multiple index on one column .
so how can i know which index will be used when executing the query ?
2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
3) Please Provide me some document of EXplain plan ?Hi Jimmy,
Consider the below example
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
CREATE TABLE FIRST AS
SELECT * FROM all_objects;
UPDATE FIRST
SET object_name = 'TEST'
WHERE owner != 'SCOTT';
CREATE INDEX idx_first ON FIRST(object_name);
SELECT *
FROM FIRST
WHERE object_name = 'TEST';
It has not used index
Execution Plan
Plan hash value: 2265626682
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
|* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
SELECT *
FROM FIRST
WHERE object_name = 'emp';
This has used the index
Execution Plan
Plan hash value: 1184810458
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
From this we can come to the conclusion that, whether to use one index or not by oracle
would also depend on the data which is present in the table. This has to be this way as
we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
scan, it would be a performance hit when it searches for the second query ie where object_name
='emp';
2.
If we have a query like below.
select * from emp
where upper(ename) = upper(:p_ename);
Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
Create index idx_ename on emp(upper(ename));
Regards,
Cool
Maybe you are looking for
-
How to connect Cam to Video to Satellite L655D?
My daughter has a Toshiba Satellite L655D and wants to get Video footage she has shot on a Sony DCR-HC51 camcorder onto her system. The camera supports DV iLink s400 with a 4 pin IEEE1394 firewire connector. The laptop however doesn't appear to have
-
This happened about twenty minutes ago and I'm frantic trying to get it back. I've tried all the stuff I can find online, turning it off and on again and nothing will work! I even tried restoring old libraries to see if that would work but still noth
-
Updated to OS5, restoration failed with error -50.
I updated the phone to OS5. Restoration failed with an error -50. I lost all my contacts, email setup, photos and other configuration. How do I get back my contacts?
-
When debugging, a for loop is not entered even though the number 6 is passed to "N".
I cannot figure out why a for loop is not entered when I debug it. When debugging a value of 6 is clearly passed to "N", the number of iterations the loop is supposed to execute. So when I debug, execution highlighting just parses right over the loop
-
Hi all, Well i am sitting here at work with my brand "new" refurb 24" imac sitting in a box next to me and i cannot get anything done. I have been using a PC for so long and my Touch is obviously synced to that. i have two questions. (from what i und