Which user-exit or BAPI triggered when a schedule line is changed

Dear All,
Does anyone know which user-exit, enhancement or BAPI is triggered when we do change on schedule line item?
Let's say, I have two line schedule line item, then I do change for delivery date. After triggered "Item Availability" button, system will accumulate confirmed Qty on first line and second line into first line. And then the second line will remain zero.
I need to know, which enhancement or user exit or any standard FM do this process.
I searched, but not found any user exit or enhancement that will go through.
Best regards,
Dinivian.

Hi,
For MFBF there are sollowing user-exits....
XMRM0001 - Backflushing in Repetitive Manufacturing.
PTRM0001 - For lead column in REM planning Table.
SAPLRMPU - Customer Exit for Article Staging.
Reward points if useful....
Regards
AK

Similar Messages

User Exit RV60AFZZ not Triggered When Processing IDOC

Hi,
I'm writing to seek some advice on why is the user exit RV60AFZZ not getting triggered when I do a vf01 bdc inside my inbouund IDOC function module. But when I try SHDB the user exit is getting triggered normally.
Thanks,
Mawi

Hi,
Yes I'm creating invoice using delivery orders, inside the idoc function module I'm using bdc call transaction vf01 but somehow it does not trigger the user exit.
But when I do manual vf01 in sap, the user exit is getting triggered.
I cant figure out why this is the behavior of sap.
Regards,
Mawi

User Exit not getting triggered

Dear all,
we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
for this, i had done the following things:
1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
(User exit, project eveything).
Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
Can anyone please guide me where i might have gone wrong?
Thank you,
Regards,
Lakshmi

Hi,
HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
Reward is useful.
Regards,
Harsha

Which user exit is triggered on Save of CV01N/CV02N

I have some requirement to be triggered on the Save of a document using CV01N/CV02N.
I found three exits in the transaction EXIT_SAPLCV110_001, EXIT_SAPLCV110_002, EXIT_SAPLCV110_003 but none of them get triggered on Save even though I have activated the enhancement.
If someone knows which user exit gets triggered on Save of CV01N/CV02N please let me know.

You can use BADIs.
You can use DOCUMENT_MAIN01.
Go to SE18. Display 'DOCUMENT_MAIN01.
On the menu bar, Click on Implementation > Create.
Give your own implementation name starting with Y or Z.
There's a method called BEFORE_SAVE in this.
It has all the data DRAW, DRAD, DRAZ etc as Changing Parameters.
So you will be able to manipulate that data in that method.
Activate the implementation And you are good to go.
Reward if helpful.

User-exit not getting triggered in VA32

Hello Experts,
Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
Thanks.

Hello Experts,
Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
Thanks

Populating cost center automatically by Ts code WVFB - Which user exit ?

Hi experts,
I want to populate cost center and to do 'k' assignment automatically using WVFB for Sotre Order creation.
Which user-exit should be activate? thanks a lot in advance.
( the purpose is when user create a store order by transaction code WVFB , the fields of 'k' assingment and cost center don't need to be filled out, an user exit should make 'k' assignment & fill out cost center KOSTL. I just need to know this user exit).
EXIT_SAPLWVFB_002 will be good for my problem? please advice. thanks.

Yes. I solved my problem.
EXIT_SAPLWVFB_002 was used to do it.

User Exit or BAPI for Auto Backflush

Hi,
We have a requirement like-
In backflush transaction (MFBF) for finish good we have many dependant materials that also need to be backflushed individually. To avoid this manual backflushing one by one we want to automate the process with the help of user exits available in SAP.
Is there any User-Exits or BAPI by which we can acheive the above process automatically. Need some examples
Thanks & Regards
AK

Hi,
For MFBF there are sollowing user-exits....
XMRM0001 - Backflushing in Repetitive Manufacturing.
PTRM0001 - For lead column in REM planning Table.
SAPLRMPU - Customer Exit for Article Staging.
Reward points if useful....
Regards
AK

MIGO - User Exit / BADI / BAPI

Hi All,
I have an reuirement that when user save document in MIGO then I want to send an e-mail alert to concerned user for inspection of goods in store. Is there any user exit / BADI / BAPI where I can write my code to send mail in MIGO tcode.
Thanx and Regards,
Rajesh Vasudeva

Hi,
Try using BADI MB_MIGO_BADI or MB_MIGO_ITEM_BADI or WB2_ADDITIONAL_DATA or WB2_EXPENSE_ENHANCE or BADI_MATN1 or WVKU_DETERMINE_SP or ME_CIN_LEINRF2V or ME_CIN_LEINRF2R.
KR Jaideep,

Which User Exit / BADI I can use?

Hello All,
While Saving PO or PR I need to check the value of commitment Item(FIPOS).
Which User Exit / BADI I can use?
Regards,
Lijo John

try this method;
Go to Tranaction: SE24.
open class CL_EXITHANDLER
Open the method " GetInstance"
Put Break point in the statement
call method cl_exithandler=>get_class_name_by_interface
when u run the po transaction it will repeatedly stop at the breakpoint check the value of exit name there press f8 to continue now when u just save the po then check the values of exitname in the debugger

Which user exit can be use before production order creating?

which user exit can be use before production order creating?
i want to check AFPO data,then show error message before production order creating.
1.i try to use PPCO0001( enhancement when saving the order) to check AFPO data, then show some error message,sap system will generate a abap down error.
2.i try to use PPCO0007(Exit when saving production order),
i can show error message,but i can't check AFPO's data.

Hi,
You can access AFPOD structure using field symbols.
Try below mentioned code in routing:
constants: c_afpod TYPE char30 VALUE '(SAPLCOKO1)AFPOD' .
FIELD-SYMBOLS: <fs_afpod> TYPE ANY .
data: wa_afpod TYPE afpod.
ASSIGN (c_afpod) TO <fs_afpod>.
wa_afpod = <fs_afpod>.
Then later you can use wa_afpod in exit PPCO0007. Hope this will work for you.
Sumit

User exit that gets triggered at the press of 'Enter' in IW42

Hi,
Is there any user exits that gets triggered at the press of Enter key in PM order confirmation IW42 transaction. Basically the requirement is to give a customized message at the order confirmation screen when the enter key is pressed.
Regards,
Prabaharan.G

Hi,
You may try the following enhancement points and exit respectively.
CMFU0001 E EXIT_SAPLCMFU_001
CMFU0002 E EXIT_SAPLCMFU_002
Pls reward points if useful.
Regards,
Renjith Michael.
Edited by: Renjith Michael on Jan 12, 2008 12:57 PM

User exit for MFBF Transaction when we save the Transaction

Hi All,
I have a requirement like this I am generating batch numbers for MFBF Transactioin for this I have written code in the user exit 'EXIT_SAPLV01Z-002' this user exit will generate the Batch Number accordingly client requirement and update the batch number to the cust table which I have created,But now the issue is if we will not save the MFBF Transaction or it got some error and terminated the Transaction MFBF still the batch Number is updating to the custom table I want to find which user exit will trigger when we will save the docuement in the Transaction 'MFBF'?
Thanks&Regards
Mahesh

Hi Mahesh,
Check these user exits.
PTRM0001            User Exit for Lead Column in REM Planning Table
SAPLRMPU            Customer Exits for Material Staging
XMRM0001            User exits: Backflushing in Repetitive Manufacturing
No of Exits:          3

User Exit/BADI/BAPI for ME51n

Hi Experts,
My requirement is somewhat like this: I need to capture all the EBAN and EBKN data for a NEW PR created. Could you please tell me which User Exit or BADI or BAPI can be used to capture the details AFTER the SAVE button is pressed in ME51N (Create PR)? Most probably it should one of the last ones called just before insertion into the database??!!
Thanks a lot in advance. Your input would be of great help.
Amrita.

Hi
For PR creation ME51N will call BAPI_PR_CREATE.
For more information, refer to the interface documentation: IF_EX_ME_BAPI_PR_CREATE_02
Standard settings
The BAdI can be used multiple times.
There is no default implementation.
Information about the implementation of BAdIs in the context of the Enhancement Concept is available in the SAP Library for SAP NetWeaver under BAdIs - Implementation.
Example
The class CL_EXM_IM_ME_BAPI_PR_CUST is available for an example implementation

I have to find out which user exit useing

Hi All,
functional consultant useing user exit ,for substitution of profir center.
can any body plz tell ,which user exit he useing to get profit center value.
thanks,
venu.

For substitution Tx:GGB1 is used. go to the tx, select FI accounting, line item, Step, double click on substitution, u'll find user exit like U100, double click on it, thats the code used for substitution.
If its different functionla area, select it instead of FI in GGB1
Tx: GCX2 shows the Z program (like ZGGBS000) used for substitution.
Regards
Sridhar
Message was edited by: Sridhar K

Regarding where can I check logs to see which user ID did it and when

Hi,
In RSA1, if some one deletes the source system, where can I check logs to see which user ID did it and when.
Please help me..
Thanks.

Hi,
Check if there is any job in sm37 with DEL ans user as *. Perhaps you may get some clue.
Bye
Dinesh

Which user-exit or BAPI triggered when a schedule line is changed

Similar Messages

Maybe you are looking for