While attempting to run a game in bootcamp on a rMBP, the CPU gets hotter until it throttles and the game stops working. Is this normal? A machine like this shouldn't have this problem. I haven't touched it and fans are maxed with CPU still at 90 degrees.
All right, here's what's going on. I have been trying ot run a very graphics intense game on my Macbook Pro with Retina Display through bootcamp on windows 7. When I start the game up, it runs beautifully.... for about ten minutes. Five minutes in, the fans start to whirl loudly. By ten minutes in, performance begins to degrade noticibly and the game starts to stutter. I live with the stuttering until it becomes completely unreasonable and I shut down the game. When I come back to my computer several hours later, the process repeats.
Here is what I believe is happening. When I start the game, the CPU immediately begins to heat up, as CPUs do. Ten minutes in, the CPU has heated up past the safety limit and begins throttling itself back so as to protect itself. Over the course of the next little while, it continues to throttle itself until it finally doesn't have enough power to properly run the game at any reasonable speed, at which point, I get frustrated and quit. My concern is this. I understand that mobile rigs aren't necessarilly the most game friendly, however, this computer should be more than capable enough to handle some light gaming. (Mind you, I'm only playing ten minutes in when the game starts to lag.) Is this something I need to bring into Apple? Is this normal?
Thanks for your help!
Malaxtom
Did you download and install the Apple drivers onto the Win7 system when setting up BootCamp? Without them, Windows will have no way of getting the fans to do their stuff when things get hot.
Similar Messages
-
Big Fish Games stop working in Mavericks. What do I do? I have re-installed them and the manager app, and nothing. I have not gotten an answer from Big Fish tech staff. Thought the problem might be with Maverick. all the games worked with Snow Leopard
Any body have this kind of problem. What was done to correct it. . .I can't wait to get a new phone as well. LG Revolution owners should be comped for this phone if Verizon intends to keep them as customers.
-
I an one of many who were frustrated at the loss of visible keywords in iPhoto in Lion. Will the new Mountain Lion solve this problem?
I'm not sure whether we are quite talking about the same thing?
With iPhoto in OSX 10.4.11 all the keywords were visible in the iPhoto library. When I moved my photos to a computer with Lion I lost this feature, there was a lot of discussion at the time about this being a backward step by Apple. So I wondered whether the Mountain Lion version of iPhoto has restored this feature? -
Got wet walking home in the rain it looks like everything is working fine except the touch screen wont work. Can anybody point me in the right direction to solve this problem, or who to talk to about getting it fixed???
Do not use, charge or turn on your iPod until it is dry:
How to fix a wet iPod or iPhone | eHow.com -
My iPhone 4S mobile have some problem I didn't touch any button but some time continuously my iphone distrubing Siri not available please give further soliton even I try to stop Siri service as well it is coming again again please give solution
Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original. -
hello friends i have a problem in my ipod touch 3g it has 4.2.1 version of software but it doesnot supports any apps so how to update the ios 5 or more than this please anybody help me..i am in trouble.
I suspect you really have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
Otherwise connect to yor computer and update via iTunes. Yo need iTunes 10 or later on the computer.
To more easily find compatilbe apps for 4.2.1
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.
Discussion post by msgarmar - technique to sort apps by date. -
Error detected while attempting to run job
Hi everyone,
One of my users tried to run a rule in Hyperion Planning 11.1.1.3 and an error occurred: Error detected while attempting to run job
When I went to Essbase, I found that when I launched the rule an error appeared:
ERROR - 1006059 - Invalid block header: Illegal block type -- Please use the IBH Locate/Fix utilities to find/fix the IBH problem.
I read that it could be an issue related to corrupted blocks. I'm not familiar with MXL and I read that there are commands that I could run. Someody could provide me help?
Regards,I have XCP files:
----- Exception Error Log Begin -----
Current Date & Time: Thu Nov 07 13:31:38 2013
Process Type: Application
Application Name: HYPCOLAN
Database Name: COSTS
Exception Log File: c:\Hyperion\logs\essbase\app\HYPCOLAN\COSTS\log00001.xcp
Current Thread Id: 5940
Exception Code: 0xC0000005=Access Violation
Exception Flags: 0x00000000=Continuable
Exception Address: 0x603B569F
Exception Parameters: 2
Exception Parameter 0: 0x00000001=Write Violation
Exception Parameter 1: 0x57970000 (Virtual Address)
----- Machine Registers -----
General Registers:
EAX=0x795D0E18 EBX=0x5796FFF8 ECX=0x57970038
EDX=0x0DC0F6CC ESI=0x00000048 EDI=0xFD320000
Control Registers:
CS =0x0000001B EIP=0x603B569F Flg=0x00010283
SS =0x00000023 ESP=0x024ACBB0 EBP=0x024ACBCC
Segment Registers:
DS =0x00000023 ES =0x00000023 FS =0x0000003B
GS =0x00000000
Floating Point Registers:
CWD=0xFFFF027F SWD=0xFFFF3920 TWD=0xFFFF3FFF
EOF=0x603B5699 ESL=0x0505001B DOF=0x603E9B50
DSL=0xFFFF0023 CRS=0x00000000
Register Area (Hex):
00 B0 B0 3A F7 7C 1D 90 CE BF
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 FC 09 A0 95 26 40
00 00 C0 C6 B2 2C 7B 91 28 40
Debug Registers:
DR0=0x00000000 DR1=0x00000000 DR2=0x00000000
DR3=0x00000000 DR6=0x00000000 DR7=0x00000000
----- Stack -----
Stack Trace:
0: 0x603b569f ESSSVRD@adReqCurrencyTransBegin + 0x9c22f 0x00000000010cf0a4 0x000000000dc0f6cc 0x000000000dc0f378 0x000000004a25db00
1: 0x603b6ba8 ESSSVRD@adReqCurrencyTransBegin + 0x9d738 0x00000000010cf0a4 0x000000000032af01 0x0000000000000004 0x000000000000198a
2: 0x603bb76b ESSSVRD@adReqCurrencyTransBegin + 0xa22fb 0x00000000010cf0a4 0x000000004a25db00 0x000000000dc0f330 0x000000000da45d00
3: 0x603bc2d1 ESSSVRD@adReqCurrencyTransBegin + 0xa2e61 0x00000000000003a8 0x00000000010cf0a4 0x000000004a25db00 0x00000000214e006c
4: 0x603bc441 ESSSVRD@adReqCurrencyTransBegin + 0xa2fd1 0x000000004a25db00 0x00000000024ad2a8 0x00000000010cf0a4 0x0000000000000000
5: 0x603bf614 ESSSVRD@adReqCurrencyTransBegin + 0xa61a4 0x00000000010cf0a4 0x000000000025db00 0x0000000000000000 0x00000000010cf0a4
6: 0x6037dc5f ESSSVRD@adReqCurrencyTransBegin + 0x647ef 0x0000000000000002 0x0000000000000000 0x00000000010cf0a4 0x00000000024ad2a8
7: 0x6037e28d ESSSVRD@adReqCurrencyTransBegin + 0x64e1d 0x00000000010cf0a4 0x00000000024ad2a8 0x0000000000000002 0x0000000000000000
8: 0x60376993 ESSSVRD@adReqCurrencyTransBegin + 0x5d523 0x000000000013003a 0x0000000000000000 0x00000000010cf0a4 0x00000000004ad200
9: 0x601c902e ESSSVRD@adCSCRConvFixMbrFromBitMap + 0x1115e 0x000000000000012c 0x00000000596ea148 0x0000000000000000 0x00000000024ad40c
10: 0x601af5d2 ESSSVRD@adOdomInc + 0x3172 0x00000000010cf0a4 0x00000000010cc462 0x000000000dc99940 0x000000000dc48fd8
11: 0x601af718 ESSSVRD@adOdomInc + 0x32b8 0x00000000010cf0a4 0x00000000010cc462 0x00000000588edfd8 0x0000000000000000
12: 0x601b02c5 ESSSVRD@adOdomInc + 0x3e65 0x00000000010cf0a4 0x000000000dc2d540 0x00000000010cf0a4 0x00000000604d283d
13: 0x6032eb72 ESSSVRD@adReqCurrencyTransBegin + 0x15702 0x00000000010cf0a4 0x000000000dc6a0a4 0x000000000dc6a008 0x00000000024af660
14: 0x6032db25 ESSSVRD@adReqCurrencyTransBegin + 0x146b5 0x000000000dc6a0a4 0x000000000dc6a008 0x00000000024af660 0x00000000604cfbba
15: 0x603320d8 ESSSVRD@adReqCurrencyTransBegin + 0x18c68 0x00000000010cf0a4 0x000000000000000d 0x00000000024af660 0x0000000000004650
16: 0x602ed5ac ESSSVRD@adThreadRegister + 0x467c 0x00000000010cf0a4 0x0000000000004650 0x0000000000000000 0x0000000000000000
17: 0x602eec17 ESSSVRD@adThreadRegister + 0x5ce7 0x00000000000cf0a4 0x0000000000000000 0x0000000000000000 0x00000000010cf0a4
18: 0x77e6481f kernel32@GetModuleHandleA + 0xdf 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
----- Application-Wide Configuration -----
Server Name:
Application Name: HYPCOLAN
Elapsed App Time: 00:21:23:39
Module Count: 16
Module 0: 0x00401000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVR.EXE
Module 1: 0x60001000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVRD.DLL
Module 2: 0x60B31000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSASOSM.DLL
Module 3: 0x60CA1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSRPM.DLL
Module 4: 0x60DC1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSAPINU.DLL
Module 5: 0x60E91000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLSU.DLL
Module 6: 0x60F41000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLNU.DLL
Module 7: 0x60F81000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSMTDNU.DLL
Module 8: 0x61031000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOPGN.DLL
Module 9: 0x61061000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSHRU.DLL
Module 10: 0x61135430 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSUTLU.DLL
Module 11: 0x61151000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSDU.DLL
Module 12: 0x61171000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSGLOBU.DLL
Module 13: 0x61181000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSECU.DLL
Module 14: 0x61191000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOBJIO.DLL
Module 15: 0x611A1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSDVRQ.DLL
----- Operating System Resources -----
System Date & Time: Thu Nov 07 13:31:39 2013
Elapsed OS Time: 13:21:34:36
OS Name & Version: Windows NT 5.02
CPU Count: 16
CPU Type: Pentium
Correct System Memory information currently not available
Swap Flags:
Enabled: Y
Disabled: N
File Found: Y
Denied: N
Swap file(s): c:\pagefile.sys
Correct Swap Space information currently not available
Total Drives: 6
Current Drive: 3
Drive 3:
Drive Name: C
Volume Label: Local Disk
Drive Type: Fixed
File System: NTFS
Total Drive Space: 142689329 KB
Free Drive Space: 71187620 KB
Used Drive Space: 71501709 KB
Drive 4:
Drive Name: D
Volume Label: Drive_D
Drive Type: Fixed
File System: NTFS
Total Drive Space: 292415096 KB
Free Drive Space: 18586252 KB
Used Drive Space: 273828844 KB
Drive 5:
Drive Name: E
Volume Label:
Drive Type: Unknown
File System: Unknown
Total Drive Space: 0 KB
Free Drive Space: 0 KB
Used Drive Space: 0 KB
Drive 6:
Drive Name: F
Volume Label:
Drive Type: Unknown
File System: Unknown
Total Drive Space: 0 KB
Free Drive Space: 0 KB
Used Drive Space: 0 KB
Drive 7:
Drive Name: G
Volume Label:
Drive Type: Unknown
File System: Unknown
Total Drive Space: 0 KB
Free Drive Space: 0 KB
Used Drive Space: 0 KB
Drive 21:
Drive Name: U
Volume Label:
Drive Type: Unknown
File System: Unknown
Total Drive Space: 0 KB
Free Drive Space: 0 KB
Used Drive Space: 0 KB
----- System-Wide Configuration -----
Elapsed Essbase Time: 00:21:23:39
Essbase Version: 11.1.1
Essbase Description: ESB11.1.1.3.0B126
Network Type: Windows Sockets
Environment Variable: ARBORPATH = c:\Hyperion\products\Essbase\EssbaseServer
Environment Variable: ARBORMSGPATH = c:\Hyperion\products\Essbase\EssbaseServer\bin
Module Count: 16
Module 0:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSDU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 1:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSGLOBU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 2:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSUTLU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 3:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSECU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 4:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOBJIO.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 5:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOPGN.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 6:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLSU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 7:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSHRU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 8:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSAPINU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 9:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLNU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 10:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSRPM.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 11:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSMTDNU.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 12:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSASOSM.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 13:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSDVRQ.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 14:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVRD.DLL
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
Module 15:
Module Name: C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVR.EXE
Module Version: 11.1.1.1
Module Description: ESB11.1.1.3.0B126.1
Module Use Count: 2
----- ESSBASE.CFG Configuration Values -----
Configuration Value: JvmModuleLocation = c:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
Configuration Value: AuthenticationModule = CSS
Configuration Value: PORTINC = 3
Configuration Value: DataErrorLimit = 65000
Configuration Value: CalcCacheHigh = 1100000000
Configuration Value: CalcCacheDefault = 500000000
Configuration Value: CalcCacheLow = 30000000
Configuration Value: CalcLockBlockHigh = 4000000
Configuration Value: CalcLockBlockDefault = 900000
Configuration Value: CalcLockBlockLow = 400000
Configuration Value: UpdateCalc = False
Configuration Value: NetDelay = 3000
Configuration Value: NetRetryCount = 1000
Configuration Value: MultipleBitmapMemCheck = True
Configuration Value: ParCalcMultipleBitmapMemOpt = True
Configuration Value: DYNCALCCACHEWAITFORBLK = TRUE
Configuration Value: DYNCALCCACHEBLKRELEASE = TRUE
Configuration Value: DYNCALCCACHEMAXSIZE = 600M
Configuration Value: DYNCALCCACHECOMPRBLKBUFSIZE = 400M
Configuration Value: CalcLimitFormulaRecursion = TRUE;
Configuration Value: AGENTPORT = 1423
Configuration Value: SERVERPORTBEGIN = 32768
Configuration Value: SERVERPORTEND = 33768
Configuration Value: AGENTDESC = hypservice_1
----- Client Request Activity -----
Server Name:
Application Name: HYPCOLAN
Total Request Threads: 20
Avail Request Threads: 19
Total Requests: 220
Average Requests: 111.000000
Weighted Average: 0.007431
Statistics Per Minute:
Current Requests: 0
Minimum Requests: 0.000000
Maximum Requests: 111.000000
Thread Count: 20
Thread Id 3324:
Request Name: GetAttributeNameSpecs
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 4060:
Request Name: GetMbrInfo
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1692:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 736:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5288:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 784:
Request Name: OtlQueryMbrs
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 220:
Request Name: GetSelectedMbrInfo
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 4356:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 6100:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5944:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 4880:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1128:
Request Name: OtlQueryMbrs
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5728:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5960:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1208:
Request Name: GetOtlUMC
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5240:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1768:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 3648:
Request Name: OtlQueryAttrib
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 1736:
Request Name: GetOtlInfo
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:33 2013
End Time: Thu Nov 07 13:31:33 2013
Thread Id 5940:
Request Name: MaxL: Execute
Database Name: COSTS
User Name: admin
Start Time: Thu Nov 07 13:31:38 2013
End Time: Pending
----- Exception Error Log End ----- -
I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve. -
I can't be the only person who has this problem with iCal- when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that.
Yeah that works, but, it involves a click on the event, a click on edit, a click on the date, keystrokes, plus, since you can't see the next month you have to have a calendar in front of you so as to put it to the right date. It's easier just to cut it and advance the month and paste it, once you are in the right month you can move it around helter skelter willy nilly no problems. Although now that you mention it I will try it, maybe it is easier than cut and paste as I don't really care about the date, as long as it gets moved into the right month I can drag it around all I want.
-
Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caller cannot hear me speak. Sometimes the problem is nt there and works properly, but most of the times, I am facing this problem. I have tried plugging in the earphone and speak, but its the same.... can anyone advse what may be the problem?
iphone 4g have this problem
first solution :change the flex micro
second solution : ic audio must reballed
also watch video
http://www.youtube.com/watch?v=C-n1LJEK3PM
http://www.youtube.com/watch?v=prSZ9yJnofY
http://www.youtube.com/watch?v=tkEiR6OPhhc -
Hello
My system version 10.5.8
I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
"Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
I then tried the following experimental steps:
a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
Guys, please solve the problem
Regards
Ruslan Reed
[email protected]MayaMa --
There are many threads on this. I typed "Uninstalling TastyApps" in the Google search, and came up with these:
http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
I do not know which of the many TastyApps haxies you have. Perhaps it would be better to contact them directly, once you know which of their products you have. -
For access to the itunes store, I get an error message -45054 ¿what can i do to fix this problem?
For access to the itunes store, I get an error message -45054 ¿what can i do to fix this problem?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank youDid you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM -
Elements 10 was deactivated on desktop and installed on new laptop. Have on
y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
help!?I am using photoshop Elements 10 under the create tab...slide show.
Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago. Had not used it other than for photo editing until today.
I can also not login in thru the program. It simply spins and I finally had to force close the program
Toni V. Sloan
Sent from my iPad
On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
created by Chris Cox in Photoshop General Discussion - View the full discussion
Photoshop doesn't do slideshows… What software are you using?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone but when I remove the headphone can not hear anything , please advice what is the problem? Thanks
Thanks for your reply, but what shall I do now ? I bought this phone from china's apple store, and I am in Egypt so there is no warranty for this phone in my county, please advice how can I solve this problem? Is there any troubleshooting tips I can follow to solve this problem ?
Thanks
Maybe you are looking for
-
How to run a 10g Report from form in client using OC4J
Hi, Every time we make a report, in order to test it we have to deploy in application server. In our application we make the report is written as a PDF in the server and shown in the client browser using WEB.SHOW_DOCUMENT. Is there a way we can do th
-
Custom IDoc Type missing segment parent/child relationships
Hi. I copied the standard ORDERS05 IDoc type to a custom type and cut out quite a few segments. My new IDoc type is setup with parent/child segment relationships, similar to many of the original relationships in ORDERS05. When I use the standard FM
-
Photoshop CS6 and Photoshop CC
What's the difference and do I need to install both?
-
SD card reader l521x not working
Hi, After recent updates my sd card reader stopped working. I've tried reinstalling drivers but didn't help...diagnostic shows that device is missing... Thanks in advance for help
-
CIS configuration is working on JBoss 4.3 but when i am using jboss 5.1.1 eap i am getting exception "Caused by: com.stellent.cis.client.command.CommandConfigurationException: java.net.MalformedURLException: no !/ in spec" at application = CISApplica