While copying WAD templete , one varient is missing.

Hi Experts,
I copied one Wad templete, when i trying to run the copied templete its showing message " varient z_norm does not exist".
I didn't done any changes in copied templete.
Please provide me the solution.
Thanks ,
Mohan

Hi,
This may help you:----
https://wiki.sdn.sap.com/wiki/display/BI/Migrationof3.xBExQueriestoBI7.0-Useful+Tips
Regards,
Suman

Similar Messages

Copying value from one cursor to another

Hi,
I have a problem while copying values from one cursor to another cursor.
The code looks like below.
PROCEDURE XYZ
            TransactionResultSet OUT NOCOPY types.ref_cursor,
IS
            temp_cursor types.ref_cursor;
            wip_rec types.ref_cursor;
BEGIN
DECLARE
                CURSOR temp_cursor IS
            SELECT ...........
END;
BEGIN
    FOR wip_rec IN temp_cursor
    LOOP
    update tinsagr set something
    where {the condition}
        IF SQL%ROWCOUNT = 0 THEN
dbms_output.put_line('this is test ');
        Fetch wip_rec into TransactionResultSet;
     END IF;
   END LOOP;so basically i want to iterate the "temp_cursor" and depending on the values i get it from here i shall update a table. Actually i want to exclude few records from "temp_cursor" and add it/copy rest of the records to "TransactionResultSet"
That means say initially " temp_cursor" has 100 records and i updated 5 records in a table and same number of records should be excluded and rest should be added to the output cursor TransactionResultSet.
How do i achieve it?
while saving i am getting
(1): PLS-00456: item 'WIP_REC' is not a cursor.
Do any one has any idea what to do in such scenario?

There are options like....
SQL> CREATE OR REPLACE TYPE emp_obj AS OBJECT (ename VARCHAR2(50), dept NUMBER);
2 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_tbl IS TABLE OF emp_obj;
2 /
Type created.
SQL> set serverou on
SP2-0158: unknown SET option "serverou"
SQL> set serverout on
SQL> DECLARE
2    rc      sys_refcursor;
3    v_ename emp.ename%TYPE;
4    v_dept emp.deptno%TYPE;
5    ---End Of Local Varriable Declaration
6    --Procedire declaration !
7    PROCEDURE TEST_CUR(pi_out_ref_cur IN OUT sys_refcursor) IS
8      emp_rec emp_tbl;
9    BEGIN
10      /* This BULK COLLECT can be done with explicit cursor,Ref Cursor
11      with some simple modification, Here I have used implicit cursor! */
12      SELECT emp_obj(ename, deptno) --Casting as the object
13      BULK COLLECT
14        INTO emp_rec
15        FROM emp
16       WHERE deptno = 10;
17
18      dbms_output.put_line('Records selected are:');
19      FOR i in 1 .. emp_rec.COUNT LOOP
20        dbms_output.put_line(emp_rec(i).ename || '--' || emp_rec(i).dept);
21      END LOOP;
22      --Now we are filtering the record and may be doing some operation with each record.
23      FOR i in 1 .. emp_rec.COUNT LOOP
24        IF emp_rec(i).ename = 'KING' THEN
25          --You can change this IF according to your need.
26          emp_rec.DELETE(i);
27        END IF;
28      END LOOP;
29      OPEN pi_out_ref_cur FOR
30        SELECT * FROM TABLE(emp_rec); --Using the TYPE AS table.
31    END TEST_CUR;
32    /* Main execution or procedure calling section*/
33 BEGIN
34    --Actual calling
35    TEST_CUR(rc);
36    dbms_output.new_line;
37    dbms_output.put_line('Now in Ref Cursor');
38    dbms_output.put_line('****************');
39    LOOP
40      FETCH rc
41        INTO v_ename, v_dept;
42      dbms_output.put_line(v_ename || '--' || v_dept);
43      EXIT WHEN rc%NOTFOUND;
44    END LOOP;
45
46 END;
47 /
Records selected are:
CLARK--10
KING--10
MILLER--10
Now in Ref Cursor
CLARK--10
MILLER--10
MILLER--10
PL/SQL procedure successfully completed.
SQL>

HT3275 the backup wad not performed because an error occurred while copying files to the backup disk.

the backup wad not performed because an error occurred while copying files to the backup disk.
The problem may be temporary.try again later to backup.if the problem persists,use disk utility to repair your backup disk.any body help me...!

realtek wrote:
the backup wad not performed because an error occurred while copying files to the backup disk.
The problem may be temporary.try again later to backup.if the problem persists,use disk utility to repair your backup disk.any body help me...!
Not one of Apple's better messages.
If you haven't found it yet, see #C3 in Time Machine - Troubleshooting. TM is likely having a problem with a file, and that will show you how to find and fix it.

While copying photos from pc to ipad only one folder gets copied, while copying photos from pc to ipad only one folder gets copied

while copying photos from pc to ipad only one folder gets copied and while trying for other folders, the previous one which copied earlier does not appear.

Are you selecting all of the folders to sync?
Note that if you deselect a folder it will be removed.

While copying condition records in pricing from one customer to another

While copying condition records from one customer to another for one material, need to give select rule, when I click that it supposed to come with values like "rule 1" but it does not have values. So I cannot copy data.
Any experts solution?
Fully rewarded.
Thanks,
Manohar

Hi,
for the condition copy, you must maintain the copy control for condition. the path:Sales and Distribution>Basic Functions>Pricing-->Copy Control For Conditions.
this is the reqirement.
I hope this useful for you.

How can I copy text from one card to another while creating cards using Iphoto?

I created two cards with different pictures using Iphoto on Macnotebook.
I want to use the same text message.
How can I copy text from one card to another?

select the text and copy (edit menu ==> copy) tehn gpo to the next card and paste
LN

An error occurred while copying files.

I am backing up a MacBook Pro Retina display to a 3TB TC and six days ago the backups just stopped and I get the following message:
Time Machine couldn't complete the backup to Time Capsule.
An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk.
I looked at the log in Time Machine Buddy and it shows the following:
Starting automatic backup
Attempting to mount network destination URL: afp://Max%20Evjen;AUTH=SRP@Endor._afpovertcp._tcp.local./Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://Max%20Evjen;AUTH=SRP@Endor._afpovertcp._tcp.local./Data
Disk image /Volumes/Data/Max’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to /dev/disk5s2: /Volumes/Time Machine Backups/Backups.backupdb
Deep event scan at path:/Users/HippieMBAMA/Pictures/iPhoto Library/Database/apdb reason:contains changes|must scan subdirs|fsevent|missed reservation|file event|
Running event scan
Finished scan
Not using file event preflight for Macintosh HD
Found 3060 files (1.13 GB) needing backup
zero date not marked for delete: /Volumes/Time Machine Backups/Backups.backupdb/Max’s MacBook Pro/2015-02-20-171344
3.37 GB required (including padding), 1.52 TB available
Stopping backup.
Error: (-43) SrcErr:NO Copying /Users/HippieMBAMA/Library/Mail/V2/[email protected]/[Gmail].mbox/All Mail.mbox/86E53377-3EAB-46ED-ADF7-46E0C68CD404/Data/2/6/2/Attachments/262783 to /Volumes/Time Machine Backups/Backups.backupdb/Max’s MacBook Pro/2015-02-26-140223.inProgress/A4533EFE-AAE4-4EDD-A542-1BDD6672E951/Macintosh HD/Users/HippieMBAMA/Library/Mail/V2/[email protected]/[Gmail].mbox/All Mail.mbox/86E53377-3EAB-46ED-ADF7-46E0C68CD404/Data/2/6/2/Attachments
Copied 1358 items (15.1 MB) from volume Macintosh HD. Linked 25141.
Copy stage failed with error:11
Backup failed with error 11: 11
Ejected Time Machine disk image: /Volumes/Data/Max’s MacBook Pro.sparsebundle
Ejected Time Machine network volume.
I tried going back to the gmail settings to ensure the trash settings were set to SHOW and SHOW IN IMAP, and I unchecked "Store deleted messages on the server" for the gmail account in the mail.app, as I was also getting messages about not being able to move messages to trash(null), and I thought that might be the issue, but while that fixed the mail issue, it did not fix the Time Machine issue.
Any help with this would be greatly appreciated.

The TC in and of itself is running ok.. otherwise you would not have internet.. so the issue is the OS in the computer.. however the combo is worse than the sum of the parts.. ie Somehow TC is less reliable with Yosemite than it would otherwise be..
here is the normal fix list.. but it is far from foolproof.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Getting eroor while copying and deleting user

Hi All,
I am unable to copy and delete users from one client, we are in ecc6.0. i am getting the following error while copying and deleting. the error is
NUMBER_GET_NEXT AENDBELEG INTERVAL_MISSING.
Please help me in this regard,
thanks,
praveen

Hi Praveen,
Implement the program correction to ensure that the system issues the correct error message.
Manually create the missing interval.
You can use error message CD 121 to enable you to identify the error more accurately. Depending on the additional information, the status is as follows:
OBJECT_MISSING : The entire AENDBELEG number range object is missing and must be created.
INTERVAL_MISSING: Number range interval 01 is missing and must be created.
INTERVAL_NOT_INTERNAL: The definition of number range interval 01 is incorrectly set to 'external number assignment'. Delete the 'external' selection in the interval definition.
Check the definition of the AENDBELEG number range object in transaction SNRO:
Object name:   AENDBELEG
Short text:    Change documents
Long text:     Number Ranges for Change Documents
To-year flag:                        Do not select
Number length domain:                 CHAR10
No interval rolling:                  Do not select
Number range transaction:             SCDN
Warning %:                            10.0
Main memory buffering:
No. of numbers in buffer:             10
You must define the following interval:
Interval No. 01
from 0000000001
to 9999999999
internal number assignment
Please look st SAP Note: <b>659573</b>
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

Copying photos from one computer to another, with descriptions

After editing photo descriptions and locations in iPhoto, it is desireable to be able to copy them to iPhoto on another computer, with the associated photo descriptions and locations. In principle, this is possible by selecting all desired photos, then selecting File -> Export... In the Export dialog box, in the "File Export" tab, select "Include: Titles and keywords", and "Include: Location information". Copy the exported files to the other computer, and do a File -> Import to Library ...
In practice, this works fine with images taken by some cameras, and not with images from others. In my limited experience with a Fuji F80EXR and a Canon SX230HS, the above work flow works with the Fuji. But, with the Canon, while the exported files clearly have the description data embedded in them (as seen by GraphicConverter), it is not imported into iPhoto, nor is it visible in Preview's Inspector. The workaround I use is to run an exiftool command on the exported files.
Exiftool is a command line utility that can read and write meta data in image files:
http://owl.phy.queensu.ca/~phil/exiftool/
I run the following command on the exported files to rewrite the IPTC Caption:
exiftool −overwrite_original_in_place -tagsfromfile %f.jpg -ext jpg -"IPTC:Caption-Abstract>IPTC:Caption-Abstract" *.jpg
Note that the above command overwrites the files that were exported from iPhoto. If you wish to leave the original files intact, with an "_original" appended to the file name, run:
exiftool -tagsfromfile %f.jpg -ext jpg -"IPTC:Caption-Abstract>IPTC:Caption-Abstract" *.jpg
I'm not sure why it is necessary to copy and rewrite that data. Perhaps there is something strange in the format of the meta data in the file as it comes from the camera, and the iPhoto export does not correct this strangeness. Copying and rewriting the data by exiftool seems to put things right.
The above works for me, but is somewhat unwieldy. Is there a better way to copy photos from one computer to another, if iPhoto refuses to import the description data that it was written to the exported files?

Thanks for the pointer. I did a test with 10 images, and confirmed the iPLM works, even with the problematic images from my Canon SX230HS.
The workflow is to use iPLM to create a new Library on the computer that has the photos you want to copy. Copy the photos to the new Library. Copy the new Library to the second computer using a method of your choice (file sharing, USB flash drive, etc). Copy the photos from the new Library to the existing iPhoto Library.
iPLM costs $20, whereas my original solution was free (but you need to invest the time to get exiftool installed and working). But, unlike exiftools, iPLM also copies over the Faces information, so it is likely a worthwhile investment if you use that feature.

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

OSB : How can we copy actions from one project folder to other projects?

How can we copy actions from one project folder to other projects in OSB?
For eg:
I have a service call out action in Project1/proxySer1
I want to copy this to Project2/proxySer2.
Espicially, in our case error handling callout is common to all of our projects and we should be able to copy from one to another.
Edited by: user10367892 on Aug 20, 2009 12:28 PM

Thank you for the reply.
It was my fault. I was on two different servers, while i was doing this and so didn't work. But copy /past action works as you suggested.
Can I select multiple actions from one stage and paste to different proxy service? I have too many options to copy/paste and hence I have this question.
Is there any other way of copying all selected actions in one stage to another, but not the complete stage itselft?

I have a new iMac and i created two libraries on iTunes. how do i copy songs from one library to the other?

I have a new imac. I created two libraries, one for me, one for my kids. how do I copy songs from one library to the other library?

Not easy unless you're just content with adding some files to the other as new files but lose playlists for those files, and playcount, and ratings, etc. If you're okay with that, you can drag the media folder from one library to the other. If you use default settings and want to duplicate the media, just drag it. If you want to add the media but leave it where it is currently located, hold down the option key while dragging to the library window.
Otherwise:
PowerTunes - http://www.fatcatsoftware.com/powertunes/ (commercial software)
syncOtunes - http://homepage.mac.com/oligrob/syncOtunes/syncOtunes.html

Everytime I copy pages from one ID CS3 doc to another, it re-applies the master page objects!!

Please Help,
This is a topic I would really like to get to the bottom of.
We have InDesign CS3 templates for creating our reports.
These templates contain around 10 different master pages with grey placeholder image boxes and text boxes with dummy text.
When we copy pages from one ID document to another, all the master page objects that were originally assigned to the pages are re-applied!!
Resulting in lots of grey dummy boxes and text boxes re-appearing on top of the page items!!
It's so annoying because we always customise the pages once we've pulled down master pages to work on, so when we copy pages across to other documents we have to apply the blank master to be able to kick out all the master objects easily. Then we need to add the page numbers and footers back onto the blank master page.
My question is, is there a way to switch this off, so when I move or copy pages from one document to another, nothing happens relating to master page objects, the pages simply just copy across as they are?
Please help! If not I may have to ask an external developer to write a script to fix this, it drives 900 of us crazy!
thanks in advance for any help.
Or am I just being ridiculous and not actually realising you can switch this off, doh!
G

Just a bit of further clarification on this issue (very few people really understand what's going on with master pages and overridden master page items):
When you override a master page item, the object is moved to a local page, but a connection is maintained with the original master page item. This a) allows for the override to be removed (and return the object to its original state). This also, b) allows for changes made to the original master page item (other than the changes made to the local item from the point that it was overridden) to effect the local item as well.
When the connection to the master page item cannot be maintained, the local item gets disconnected totally from the master page, and becomes a regular, run-of-the-mill page item.
In light of this, there's three ways you can end up with duplicate master items:
Reapplying a master page (or applying a new one). When you reapply a master, all overridden master page items get detached from the master, and the original mster page item appears again in its original state. Most of the time this produces unwanted duplication of objects. To fix up your page, you have two options: a) Delete the master page item, and b) copying the contents of the original to the new master page item. The disadvantage of "a" is that you end up with an item which is totally detached from the master, and changing the item on the master will have no effect on the local item. The disadavantage of "b" is that it's a lot of work...
Moving a page to a different document. When you move a page to a different document which has the same master as the one originally applied, the master in the new doc is applied, and the effects are identical to reapplying a master page (i.e. overridden objects are detached). If the applied master (i.e. a master with the same name) does not exist in the new doc, the master is transferred over to the new doc along with the page, and the connections to the master page are preserved (well, re-created actually...). The workarounds in case #1 apply here as well.
When page sides change in a document, the objects on the facing page appears.
What happens here is a bit confusing, but here's an approximate explanation:
When you apply a master to a page or spread in InDesign, what you are actually doing is applying an entire spread to an individual page. You can thing of a master spread as an overlay (or more precisely: underlay) on the page with a window cut out to the exact page dimensions.
When the page side changes that "window cut-out" shifts to show the master spread items which correspond to the position within the spread of your current page (i.e. recto or verso). All objects which exist outside the window shift out of view (but still exist!).
When an object is overridden, the position of the object is defined by its location on the local page, NOT its position on the master spread. When the page then changes sides, the object remains where it was on the page (even though the object it's connected to on the master spread moves out of the window of view). A corresponding object on the facing page of the master (if it exists) will then show in addition to the overridden one.
Now remember: contrary to the first two cases, both objects are based on master ones: one visible one and one invisible one.
Dealing with this third case requires much more care than the first two.
The obvious way to deal with this would be similar to the first two, but if you remove the local object and transfer the content to the new maste object, the invisible master object on the non-visible page was actually removed, so when the page sides change again, the object will now be connected to the now-invisible master page item, and the correct master page item will be gone!
The "correct" way to deal with this would be to transfer the content to the new master page item and remove overrides (not delete!) on the local item (which will make it disappear, because it moves back to the invisible page). Of course, when page sides change again, it becomes necessary to repeat the entire process.
If the local object gets deleted, then your master spread is missing objects with no visible indicator of the fact. This can lead to confusion when the document might be edited at some later point in time.
I believe that this complicated and un-intuitive behavior of master pages is part of the reason people tend to avoid using master page items. Documents tend to get messed up in really odd ways... It's a real shame, because extensive use of master page items has a lot of potential for streamlining workflows and saving an awful lot of time. This behavior really puts a damper on really using master pages as templates.
Getting master page items to work the way they "should" was a big part of what I was trying to accomplish with AutoFlow Pro... When the master page items are defined as such (i.e. given a unique name), AutoFlow Pro solves all three of the above issues by keeping overridden master page items connected to the master page items on the currently applied master (and when a new master is applied as well!).
(When I have a bit of spare time, I think I'll write this up on my blog with some visuals to make this easier to grasp...)
Harbs

Copy more than one clip at a time from iPhoto to iMovie?? Please help!

Is it possible to copy more than one clip at a time from iPhoto to iMovie? I can't find a way to select/copy more than one.

OK you can leave them in iPhoto and access them from the iMovie Event for iPhoto.
If you prefer to move them to a regular iMovie Event, you can do the following.
1) right-click on one of the iPhoto clips and select "Reveal in Finder". This will open a finder window showing the clips in the iPhoto Library.
2) In a different Finder window, create a folder to hold your event in iMovie. If you are using an internal drive, create a folder using your desired Event Name under the Movies/iMovie Events Folder.
Note: If you are using an external drive, create a Folder called iMovie Events at the top level of the external drive. Then create the (Event Name) folder under this. The external drive must be formatted as MacOS Extended (journaled) for this to work.
3) Select all the clips in the iPhoto finder window that are part of this event and Move them to the Movies/iMovie Event/(Event Name) folder.
4) After you have done this for all the Events, open iMovie and let it generate thumbnails. This may take a while.

Error while copying all rows into an ArrayList...plzzz help

Hi all,
Iam doing a small POC on publishing a Application module as webservices...iam stuck while copying the results of whereclause into an arraylist.. some one please help....below is the code
public class matrixVOImpl extends ViewObjectImpl {
    /**This is the default constructor (do not remove)
    ArrayList al=new ArrayList();
    public matrixVOImpl() {
public ArrayList getCompLevels(String role){
    int x=0;
    int pos=0;
    setWhereClause("matrixEO.ROLE='"+role+"'");
    executeQuery();
    if (!hasNext())
            throw new JboException("unable to find role " +role);
    long i=getEstimatedRowCount();
    for(x=0;x<=i-1;x++){
    Row rw=getRowAtRangeIndex(x);************ //here lies the problem for me********************
String comp= rw.getAttribute("Competency").toString();
    String lr=rw.getAttribute("LevelRequired").toString();
   al.add(0,comp);
pos=pos+1;
   al.add(1,lr);
pos=pos+1;
    return al;
problem is at Row rw=getRowAtRangeIndex(x); for loop is not workin here...when i manually put zero,first(),last() in place of x works fine i get the first row ..but if i put 1,2...10 or any number i get a null pointer exception..
how to get all the rows ...wch can b copied to an arraylist...can someone help pllzz.Edited by: Oraclerr on Apr 10, 2009 12:31 PM

I think it's because getRowAtRangeIndex depends of what the getRangeSize() value is on the view object before executeQuery is invoked. You can change this value in the properties of the viewobject or programmatically, using setRangeSize. If your range size is one, getRowAtRangeIndex(1) returns null, because the index i zero-based. You should only use range size if you only need to present ex. 10 rows a a time?

While copying WAD templete , one varient is missing.

Similar Messages

Maybe you are looking for