While creation of gl a/c error appear like this

Description in language EN already created
Message no. FH174

Hi,
I think maybe you have deleted this account, but unfotunately due to some reason, the Account description is not deleted from
SKA1 table sucessfully.
If yes, then I think you can try to apply the zztest00 report as below in your system:
report zztest00.
tables: ska1, skat.
select-options ch_o_acc for skat-ktopl.
parameters testrun as checkbox default 'X'.
select * from skat where ktopl = ch_o_acc.
select single * from ska1 where ktopl = skat-ktopl
and saknr = skat-saknr.
check sy-subrc <> 0.
write: / skat-ktopl, skat-saknr, skat-spras.
check testrun = space.
delete skat.
endselect.
This report should correct it. Please run it with "testrun = 'X'" first.
If this list shows wrong account numbers only, please run it without
testrun.
Hope this information can help you solve this issue.
Best Regards,
Gladys

Similar Messages

HT203175 When I install itunes I received an error message like this:The exception unknown software exception (0Xc06007e) ocurred in the application at location 0x7c812afb

When I install itunes I received an error message like this:The exception unknown software exception (0Xc06007e) ocurred in the application at location 0x7c812afb. After the installation the computer is showing the message every time.

If you update your QuickTime Player, does that clear up the iTunes message?

I can't install itunes on my windows 8.. error appears says this : error microsoft. vc80.crt type="win32".version="8.0.50727.6195"

Why I cant Install itunes in my windows 8? error appears and it says:
error microsoft. vc80.crt type="win32".version="8.0.50727.6195"
please healp me

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Why is there a error appearing in this??

I have written a program to search if the particular item is present in the file or not.. so why is there any error hope it is right!
BufferedReader check;
     try{
         check=new BufferedReader(new FileReader(FileName));
    }catch(FileNotFoundException ex){
        System.out.println("Sorry file not found");
        return;
                            System.out.println("Enter the item to be found");
                            String input_item=in.readLine();
                            String item= input_item.toUpperCase();
                            System.out.println("Searching for "+item);
                            int messenger=0, x=0;
                             while(x<sType.length) {
                                sType[x]=check.readLine();
                                sNum[x]=Integer.parseInt(check.readLine());
                                sPrice[x]=Float.parseFloat(check.readLine());
                                if(item.equals(sType[x])) {
                                    System.out.println("Found "+sType[x]);
                                    System.out.println("-------------------------------------------------------");
                                    System.out.print("Stock Name :");
                                    System.out.println("\t"+sType[x]);
                                    System.out.print("Stock Level:");
                                    System.out.println("\t"+sNum[x]);
                                    System.out.print("Stock Price:");
                                    System.out.println("\t$"+sPrice[x]);
                                    System.out.println("-------------------------------------------------------");
                                    messenger=1;
                                x++;
                            if(messenger==0) {
                                System.out.println("Sorry "+item+" not available");
and the file contains the following in the particular format
LOGITECH CORDLESS DESKTOP LX300
200
50.2
MONITER
62
54.9
PANASONIC
54
32.3
MOUSE
95
21.4pl help why this error is appearing???
Exception in thread "main" java.lang.NumberFormatException: null
at java.lang.Integer.parseInt(Integer.java:415)
at java.lang.Integer.parseInt(Integer.java:497)
at programname.<init>(NewMain.java:17)
??????????????????????????????????????????????????????

Please do not post the same question more than once!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.java.sun.com/thread.jspa?messageID=9919410

Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

STOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download

I get the error message like this "open script command failed"

Dear Support,
from subject detail
my scripts in VBA path are failed
I need to edit that scripts again but Etester sent the error message that
"open script command failed"
"(Invalid procedure call or argument)"
and then I press enter "ok" button
Right now I cann't to see my script anymore because it has been invisibled my script already ,,,,, I can't to edit anything , can't to copy and paste sub script from another code
Please suggest me about this ,,,How to open it for edit that script ? I don't want to make it new.
Thanks,
Por
Edited by: user10668951 on Dec 2, 2008 6:37 PM

Hi,
I am getting the same pboblem right now,did you get the solution for this pboblem?

Error sounds like this " iTunes could not connect to the iTunes Store. The network connection timed out. Make sure your network settings are correct and your network connection is active, then try again.

Please help me out.. thank you

I have Windows 7 and after going through several suggestions, the one that worked for me was this:
A Dell service representative removed an expired version of McAfee and a half *** version of Norton Antivirus (problem #1: I should only have one functioning virusware up, not two or more)...I then purchased a reliable Antivirus + Cleaner from the Dell rep and he installed it.
The Dell rep then noticed that when he checked my computer properties, I had the following:
Windows 7 Home Premium
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
Service Pack 1 <I WAS MISSING THIS PARTICULAR ITEM; THE DELL REP ADDED THIS>
Once the Dell rep did this, I was able to access my iTunes Store and get things updated from 10.5 to 10.6....It took 2 hours, but glad it got done.

I need to add a field so it appears like this for example: I _________ agree to the above on _________.

How do I allow for a person to fill out a field like that, mid sentence?

What do you mean by editing PDF? If you have a PDF form and want to make some form fields, in your case pages other than the first page, non-editable, you can lock the form fields on all pages other than first. You can write a JavaScript that does that, include it in the original PDF form and activate it at some point in time (like when a certain button is clicked, or certain form field gets focus). If you mean other ways of editing, like changing text on a page, you cannot protect only part of the document from that.

Why are my menu dropdowns appearing like this?

I have Windows 7 and recently unistalled PSE 10 and it did not have this issue; Now Photoshop CS6 is displaying the menu dropdowns as shown in Image 1. Bridge CS6 does not have the issue;it is showing the menu bars correctly (see Image 2). I downloaded and installed all updates. Any guidance is much appreciated.
-Mike
Image 1: PS CS6 dropdowns
Image 2: Bridge CS6 dropdowns

That is weird! For starters, can you try clearing your prefs? http://forums.adobe.com/thread/375776
Or, I'd suspect a faulty video driver.

While starting sun one web server error message

i have installed sun one web server 6.1,then i tried to start it from start up menu icon "start server administration server".the command prompt just displays and goes off.then i tried to start it from command prompt by giving path
"C:\Sun\WebServer6.1\https-pcname.com>startsvr".
error comes like this
C:\Sun\WebServer6.1\https-pcname.com>net start https-pcname.com Access is denied
can any one help me to solve this .

You most probably don't have admin priviledges required to start a service on this Windows machine.

FW CS6 Error message: An error occurred. This command requires an active document.

Hi,
I've been seeing the following message while saving active documents recently: An error occurred. This command requires an active document. My document does indeed save.
I'm wondering if a recently-installed (and much-loved) extension could be the cause?
Has anyone else seen this?
Thanks!
--Lucija

As far as similar problems, I recently opened Fireworks 8 to test the File Management button (the Put command in particular) and found that it triggered an alert message normally produced by Aaron Beall's "Deform to Path" command:
I tried closing the Path panel, and the alert message was still triggered. (I do have that command also available within the Commands menu, but I'm not sure what was going on there; however, since I don't use Fireworks 8 much anymore and never use the Put command, I decided to leave it alone.)
Currently, I use Fireworks CS6. Several months ago, I noticed a "migrating panel" bug, where panels within the default configuration had been mysteriously swapped for one another: The Color Palette panel had been replaced by Lorem Ipsum, while the Path panel had gone missing, replaced by the Color Palette panel—bizarre behavior, to say the least. I tried reselecting a default Workspace (as well as a saved one), but it had no effect on the problem. I still haven't taken the time to diagnose and fix the issue, but I suppose it might have somehow been triggered by the Lorem Ipsum panel, which was a custom installation.

Error Message While creation of SC No commitment item entered in item

Hi,
I am creating SC while creation following error message is appearing :-
No commitment item entered in item 1 10 6534
Where 10   :Comp code
           6534 : CC
Is there any thing commitment related missing in SRM ?
Thanks,
Sachin

Hi,
run TA FS01
-> G/L Account        <enter your G/L account>
     Company Code    <enter the company code - i think its 6534 in your example>
     -> Tab "Create/bank/interest"
         -> "COMMITMENT ITEM" <======
I hope that helps!
Best regards,
Georg

While trying to change a BOM with transaction CS02, a runtime error appears

While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
     Short dump "090618 110101 donalda 11557 " generated
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     18.06.2009 at   11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol

Error while creation of web service model in web dynpro

Hi,
I am getting following error "no services available or local server not accessible" while creation of web service model.
I have already created my web service nad deployed it. It was deployed successfully.
In the web service model creation wizard I am not able to see neither my web service nor any other standard service.
Regards,
Anubha Pandey

Are you using the deprecated Web Services model or the new adaptive web services model?
Take a look in this document: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7

Error while running adcfgclone on APPS tier (ERROR: context creation not completed successfully)

I am getting below error while running adcfgclone on APPS tier
ERROR : Unable to set CLASSPATH
/corp_ex1/DRPM/drpmcomn/clone/bin/../jlib/classes111.zip: is missing
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_29475.err file for errors
i copied classes111.zip from IAS_HOME to COMMON_TOP . Now I am getting below error
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_30763.err file for errors

Please post the details of the application release, database version and OS.
ERROR: context creation not completed successfully
This is a generic error, please check the log files for details about the error.
Thanks,
Hussein

While creation of gl a/c error appear like this

Similar Messages

Maybe you are looking for