While installatting oracle apps 11i on linux redhat 4 geting following errr
it showing System Utilities check failed with following error
error code:
RW-50011
Hi;
This is generic error, please check log file for more details.For log file please check my blog:
http://heliosguneserol.wordpress.com/2010/04/13/log-file-location-for-oracle-e-business-suite-r11/
Also check my blog for installation steps,requirement etc.
http://heliosguneserol.wordpress.com/category/step-by-step-oracle-e-business-suite-installation/oracle-e-business-suite-release-11/
Regard
Helios
Similar Messages
-
Error while clonning Oracle app 11i
Hi all Once again, a new day a new error :)
i am having Error while clonning Oracle app 11i on windows 2003 sp1 32 bit db 9.2.0.6.0
when running adcfgclone.pl dbTier it successfully runs uptill 70% at this stage it throws the below error
================================================================================================
Beginning database tier Apply - Wed Mar 7 01:49:19 2012
Log file located at d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\ApplyDBTier_03070149.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
=================================================================================================
when i check the ApplyDBTier_03070149.log
i found this below
==============================================================================================================================================================================================================================
Skipping Profile Phase
Skipping Apply Phase
Executing StartDbLsnr...
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process NPRO ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCNPRO))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=hassan.com)(Port=1534))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:57
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
NL-00280: error creating log stream d:\oracle\neproddb\9.2.0\network\log\npro.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 13: Permission denied
Listener failed to start. See the error message(s) above...
addlnctl.cmd exiting with status 3
.end std out.
.end err out.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\adcrdb_NPRO.txt"
ECHO is off.
ECHO is off.
Creating the control file for NPRO database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:01 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) The system cannot find the file specified.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:42 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ECHO is off.
Checking for errors ...
ECHO is off.
The database has not been successfully created. Shutting down the instance...
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:52 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
adcrdb.cmd exiting with status 1
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:474)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:319)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:295)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Unknown Source)
==============================================================================================================================================================================================================================
please help me out with your advices
Thanks
HassanDear Hussein / helios ,
it worked finally i gave a high number 76 and it worked with out any problem also this time i gave loop back adapter an ip address i just remember now that i was not giving an ip to my loop back adapter i gave as below
ip : 10.10.10.10
subnet : 255.255.255.0
and made my host file look like as
127.0.0.1 localhost
10.10.10.10 hassan.com hassan
then i tested the ping by pinging hassan.com and the reply came from 10.10.10.10
and also i disabled my wireless network card before running adcfgclone
and it worked ALLHAMDOLLILAH :)
Thanks to the great masters Hussein & Helios :)
Now its time for appsTier cloning hope that it goes smooth :)
Regards,Re: Error while clonning Oracle app 11i
Hassan -
Error while install Oracle Apps 11i
I'm installing Oracle Apps 11i (VIS) on SUN Solaris.
Please advise me.
thanks a lot.
================================
Rapid Install Wizard is validating your file system......
Rapid Install Wizard will now launch the Java Interface.....
root@dbserver # Database logfile - /data1/VIS/visdb/9.2.0/appsutil/log/VIS_dbser
ver/10030640.log
Appltop logfile - /apdata1/VIS/visappl/admin/VIS_dbserver/log/10030640.log
AC-50201: Following error encountered while setting backup location of Contextfi
le : Out directory could not be created at :/apdata1/VIS/visappl/admin/VIS_dbser
ver/out/10032332
Error occured before Context Value Management could be completedthis's a log.
================================================
Succesfully changed Permissions for /apdata1/VIS/visappl/admin/VIS_dbserver/log
Processing DriverFile = /NAS/Stage11i/StartCD/Disk1/rapidwiz/template/adriapps.drv
Running Instantiation Drivers for /NAS/Stage11i/StartCD/Disk1/rapidwiz/template/adriapps.drv
instantiate file:
source : /NAS/Stage11i/StartCD/Disk1/rapidwiz/template/adrunias.sh
dest : /apdata1/VIS/viscomn/temp/adrunias.sh
AC-00437: Unable to backup : /apdata1/VIS/viscomn/temp/adrunias.sh to /apdata1/VIS/visappl/admin/VIS_dbserver/out/templbac/adrunias.sh: java.io.FileNotFoundException: /apdata1/VIS/visappl/admin/VIS_dbserver/out/templbac/manifest.txt (Permission denied)
Raised by oracle.apps.ad.autoconfig.InstantiateFile
setting permissions: 755
setting ownership: applvis:dba
instantiate file:
source : /NAS/Stage11i/StartCD/Disk1/rapidwiz/template/adrunat.sh
dest : /apdata1/VIS/viscomn/temp/adrunat.sh
AC-00437: Unable to backup : /apdata1/VIS/viscomn/temp/adrunat.sh to /apdata1/VIS/visappl/admin/VIS_dbserver/out/templbac/adrunat.sh: java.io.FileNotFoundException: /apdata1/VIS/visappl/admin/VIS_dbserver/out/templbac/manifest.txt (Permission denied)
Raised by oracle.apps.ad.autoconfig.InstantiateFile
setting permissions: 755
setting ownership: applvis:dba
Step 0 of 5
Command: /apdata1/VIS/viscomn/temp/adrunias.sh
Step 3 of 5: Doing UNIX preprocessing
Executing: chmod -R 777 /var/opt/oracle/oraInventory
chmod -R 777 /var/opt/oracle/oraInventory has succeeded
Processing Step 3 of 5
Executing: su applvis -c "/apdata1/VIS/viscomn/temp/adrunias.sh APPS APPS"
STARTED INSTALL PHASE : APPS TECH STACK : Tue Oct 3 19:33:54 ICT 2006
runProcess_1
Copying jre1.1.8 to the common_top
runProcess_2
Statusstring Installing Oracle iAS
Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
Checking Disk contents in - /NAS/Stage11i/StartCD/Disk1/rapidwiz
Checking Disk contents in - /NAS/Stage11i/oraiAS/Disk1
Checking Disk contents in - /NAS/Stage11i/oraiAS/Disk1
UnzipCount:208
Processing Disk1....
Processing Disk2....
Processing Disk3....
Processing Disk4....
runProcess_3
Statusstring Configuring iAS ORACLE_HOME
runProcess_4
Statusstring Configuring 806 ORACLE_HOME
runProcess_5
adlnk806.sh started at Tue Oct 3 20:31:57 ICT 2006
Log file located at /apdata1/VIS/visora/8.0.6/install/make_10032031.log
adlnk806.sh completed sucessfully
runProcess_6
Statusstring Link iAS HOME
adlnkiAS.sh started at Tue Oct 3 20:36:04 ICT 2006
Log file located at /apdata1/VIS/visora/iAS/install/make.log
Found ORACLE_HOME is IAS1022. Starting relinking...
adlnkiAS.sh completed sucessfully
runProcess_7
Statusstring Creating symblic link to /apdata1/VIS/viscomn/util/java/1.4/j2sdk1.4.2_04 from /apdata1/VIS/visora/iAS/Apache/jdk
runProcess_8
Creating link for iAS ORACLE_HOME/6iserver pointing to 8.0.6 Home
runProcess_9
Statusstring Registering iAS ORACLE_HOME with OUI inventory
Log file located at /var/opt/oracle/oraInventory/logs/OracleHomeCloner_10030842.log
ORACLE_HOME /apdata1/VIS/visora/iAS was registered successfully.
FINISHED INSTALL PHASE : APPS TECH STACK : Tue Oct 3 20:42:47 ICT 2006
There was an error while running the command - su applvis -c /apdata1/VIS/viscomn/temp/adrunias.sh APPS APPS
/apdata1/VIS/visora/iAS/6iserver: No such file or directory
su applvis -c "/apdata1/VIS/viscomn/temp/adrunias.sh APPS APPS" has succeeded
Step 1 of 5
Command: /apdata1/VIS/viscomn/temp/adrunat.sh
Step 4 of 5: Doing UNIX preprocessing
Executing: chmod -R 777 /var/opt/oracle/oraInventory
chmod -R 777 /var/opt/oracle/oraInventory has succeeded
Processing Step 4 of 5
Executing: su applvis -c "/apdata1/VIS/viscomn/temp/adrunat.sh APPS APPS"
STARTED INSTALL PHASE : APPLTOP : Tue Oct 3 20:42:49 ICT 2006
runProcess_1
Statusstring Installing APPLTOP - gappl.drv
Enter the location of the CD labeled Oracle Applications Rapid Install - Appl_top Disk 1 :
Checking Disk contents in - /NAS/Stage11i/StartCD/Disk1/rapidwiz
Checking Disk contents in - /NAS/Stage11i/oraApps/Disk1
Checking Disk contents in - /NAS/Stage11i/oraApps/Disk1
UnzipCount:1248
Processing Disk1....
Processing Disk2....
Processing Disk3....
Processing Disk4....
Processing Disk5....
Processing Disk6....
Processing Disk7....
runProcess_2
Statusstring Copying the APPL_TOP Context template file.
FINISHED INSTALL PHASE : APPLTOP : Tue Oct 3 23:31:52 ICT 2006
su applvis -c "/apdata1/VIS/viscomn/temp/adrunat.sh APPS APPS" has succeeded
Creating logfile - /apdata1/VIS/viscomn/admin/log/VIS_dbserver/txkSetSOHM.log
Running txkSOHM.pl script - su applvis -c "/apdata1/VIS/visora/iAS/Apache/perl/bin/perl -I /apdata1/VIS/visora/iAS/Apache/perl/lib/5.00503 -I /apdata1/VIS/visora/iAS/Apache/perl/lib/site_perl/5.005 -I /apdata1/VIS/visappl/au/11.5.0/perl /apdata1/VIS/visappl/fnd/11.5.0/patch/115/bin/txkSOHM.pl contextfile=/apdata1/VIS/visappl/admin/VIS_dbserver.xml type=primary 806soh=/apdata1/VIS/visora/8.0.6 iASsoh=/apdata1/VIS/visora/iAS configtop=/apdata1/VIS/viscomn/conf/VIS_dbserver appspass=apps autoconfig=n"
*** USER FEEDBACK ***
Absolute path of Application's Context XML file : /apdata1/VIS/visappl/admin/VIS_dbserver.xml
Type of Instance [primary/secondary] : primary
Absolute path of Shared Oracle Home top :
Absolute path of 8.0.6 Shared Oracle Home : /apdata1/VIS/visora/8.0.6
Absolute path of iAS Shared Oracle Home : /apdata1/VIS/visora/iAS
Absolute path of config top : /apdata1/VIS/viscomn/conf/VIS_dbserver
Run AutoConfig [y/n] : n
Oracle Application apps schema password : apps
Absolute path of the log file : /apdata1/VIS/viscomn/admin/log/VIS_dbserver/txkSetSOHM.log
Prompt for confirmation [y/n] : n
Absolute path of 8.0.6 config Home : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6
Absolute path of iAS config Home : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS
Application's Context file Saved as : /apdata1/VIS/visappl/admin/VIS_dbserver.xml.SOH
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6 ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/logs ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Jserv/logs/jvm ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/htdocs/discwb4/applet ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/modplsql/cache/plsql ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/vbroker/adm/impl_dir ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/discwb4/bin/.reg ...
Searching Applications Context file for substitutions of:
/apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6
/apdata1/VIS/viscomn/conf/VIS_dbserver/iAS
Context Variable: s_weboh_tnsadmin
Present value : /apdata1/VIS/visora/iAS/network/admin/VIS_dbserver
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/network/admin/VIS_dbserver
Context Variable: s_tools_tnsadmin
Present value : /apdata1/VIS/visora/8.0.6/network/admin/VIS_dbserver
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/network/admin/VIS_dbserver
Context Variable: s_web_pid_file
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/logs/httpd.pid
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/logs/httpd.pid
Context Variable: s_web_ssl_directory
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/conf
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/conf
Context Variable: s_web_ssl_keyfile
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/conf/ssl.key/server.key
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/conf/ssl.key/server.key
Context Variable: s_web_ssl_certfile
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/conf/ssl.crt/server.crt
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/conf/ssl.crt/server.crt
Context Variable: s_web_ssl_certchainfile
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/conf/ssl.crt/ca-bundle.crt
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/conf/ssl.crt/ca-bundle.crt
Context Variable: s_jserv_secret_key
Present value : /apdata1/VIS/visora/iAS/Apache/Jserv/conf/jserv.secret.key
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Jserv/conf/jserv.secret.key
Context Variable: s_web_home_file
Present value : /apdata1/VIS/visora/iAS/VIS_dbserver.env
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/VIS_dbserver.env
Context Variable: s_frmWalletDir
Present value : /apdata1/VIS/visora/8.0.6/forms60/wallet
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/forms60/wallet
Context Variable: s_forms60_wallet
Present value : /apdata1/VIS/visora/8.0.6/forms60/wallet
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/forms60/wallet
Context Variable: s_ifile
Present value : /apdata1/VIS/visora/8.0.6/network/admin/VIS_dbserver/VIS_dbserver_ifile.ora
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/network/admin/VIS_dbserver/VIS_dbserver_ifile.ora
Context Variable: s_ias_ifile
Present value : /apdata1/VIS/visora/iAS/network/admin/VIS_dbserver/VIS_dbserver_ifile.ora
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/network/admin/VIS_dbserver/VIS_dbserver_ifile.ora
Context Variable: s_listener_ifile
Present value : /apdata1/VIS/visora/8.0.6/network/admin/VIS_dbserver/VIS_dbserver_listener_ifile.ora
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/network/admin/VIS_dbserver/VIS_dbserver_listener_ifile.ora
Context Variable: s_tools_home_file
Present value : /apdata1/VIS/visora/8.0.6/VIS_dbserver.env
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/VIS_dbserver.env
Context Variable: s_iASconfig_home
Present value : /apdata1/VIS/visora/iAS
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS
Context Variable: s_806config_home
Present value : /apdata1/VIS/visora/8.0.6
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6
Context Variable: s_lock_pid_dir
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/logs
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/logs
txkSOHM.pl successfully completed
.end std out.
.end err out.
Starting CVM on Middle Tier.....
java.lang.Exception: Out directory could not be created at :/apdata1/VIS/visappl/admin/VIS_dbserver/out/10032332 -
Installation of Oracle Apps 11i
I have purchased Oracle Apps 11i(One month license) around two months back. Will it be a problem if I install after 30 days of purchase?(I have back dated the host by two months.
The Host Name is Ciber.
I tried to load Vision demo on WIN NT6.0 SP6 by giving DNS Domain name by
right click Network Neighbourhood/Protocols/Double Click on TCP/IP Protocal and giving DNS Domain Name as 'applic'.
and it was pinging when I give 'ping ciber.applic'
While installing Vision Demo the system allotted web port as 8002. No errors reported while installing Oracle Apps.
If I give the following command at the browser
http://ciber.applic:8002 it says error 430 unable to resolve host name ciber.applic
however the application home page was coming if I give the host IP address at the browser as http://192.168.245.200:8002.
But if I click on any of the links it is going to ciber.applic and error 430 is coming.
Then I have loaded Windows 2000 Professional and tried the following.
Right click on Mynetwork places/Properities then Right Click on Local Area Connection Double Click on Internet Protocol(TCP/IP)and I gave the the same value '192.168.245.200'for IP Address and preferred DNS server.
Click on 'Advanced' click on DNS I have added 192.168.245.200 as DNS server addresses in order of use. I gave DNS suffix for this connection as 'applic' and Installed Vision demo. No errors reported while installing Oracle Apps.
If I give the following command at the browser
http://ciber.applic:8002 it says error 430 unable to resolve host name ciber.applic
however the application home page was coming if I give the host IP address at the browser as http://192.168.245.200:8002.
But if I click on any of the links it is going to ciber.applic and error 430 is coming.
I am not able to understand where I am doing mistake.
Can any one help me out to sort out the problem?
Thanks in advance
P.Ratna PrasadRatna,
You can write the IP and the hostname in the hosts file in the "C:\WINNT\System32\Drivers\etc\" directory. For e.g. if your IP address is 192.168.1.1 and your hostname is "RatnaPC" then you should write like this on a new line in the "hosts" file:
192.168.1.1 RatnaPC
Don't forget to hit the return key at the end of the line to bring it to the next line!!!
This for sure will help in resolving the hostname.
Best Regards,
Srinivas Aekbote -
Oracle 10g AS pacth for Oracle Apps 11i
Hi everyone,
I have installed Oracle 10g AS (10.1.2.0.2) for Oracle Business Intelligence on Sun Solaris 10 (64 bit) and integrated it with Oracle Apps 11i (11.5.10.2).
Everything seems fine but i am facing problems like
1) Toolbars not appearing correctly sometimes like it is disabled and enables by itself.
2)sometimes clients come accross "Connection with Server lost..." error while taking export (very few).
3) Its giving the error (mentioned at the end) only on one client machine while taking export to Excel.
I have tried installing Oracle 10g AS patch set 2 10.1.2.2 for Solaris but the problem persisits. Is patch set 2 compatible or certified with Oracle Apps 11i? if not then is there any other work around or do i have to wait for some new patch.
Thanx for your inputs.
Najeeb
Java(TM) Plug-in: Version 1.4.2_06
Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\ASHIBEL
Proxy Configuration: Manual Configuration
Proxy: http=EMRPXY1:80,https=EMRPXY1:80,ftp=EMRPXY1:80,gopher=EMRPXY1:80
Proxy Overrides: emrpxy1:80,<local>
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Installed custom security manager
Could not assertPermission PermissionID.SYSTEM for IE
This can cause "Warning : Applet Window" to be displayed when running with IE
attempt 1: adding Protocol.protocol -> rmi
attempt 1: adding default Protocol.timeoutsecs -> 40
attempt 1: adding RMIProtocol.transport -> http
attempt 1: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 1: adding RMIProtocol.hijacksessionid -> 1
attempt 1: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 1: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
attempt 2: adding Protocol.protocol -> rmi
attempt 2: adding default Protocol.timeoutsecs -> 40
attempt 2: adding RMIProtocol.transport -> https
attempt 2: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 2: adding RMIProtocol.hijacksessionid -> 1
attempt 2: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 2: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
Discoverer Model - 10.1.2.48.18
New LOOKUP
Lookup Requested
Performing lookup RMI lookup: http://discoverer.emaar.ae:7777//discoverer/plus
Reading bytes from input stream
Unmarshalling response
Session ID:2007061817102717616
BI Beans Graph version [3.2.2.0.24]
BI Beans Graph version [3.2.2.0.24]
The export/print operation failed
Worker oracle.disco.publish.PublishData@6ffeb, command=ExportData failed with DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0 wrapping exception oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
Error: DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
at oracle.disco.remote.corba.RMIToCorba.convertRemoteException(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface._handleGenericExceptions(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface.getBinaryData(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface.GetBinaryData(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrBinaryExport.xmlUpdateServer(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrCorbaXML.corbaUpdateServer(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.export.ExportInputStream._readBuffer(Unknown Source)
at oracle.disco.model.corbaserver.export.ExportInputStream.read(Unknown Source)
at java.io.InputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at oracle.disco.publish.PublishData._writeBinaryData(Unknown Source)
at oracle.disco.publish.PublishData._exportSheets(Unknown Source)
at oracle.disco.publish.PublishData.runDiscoWorker(Unknown Source)
at oracle.disco.worker.DiscoWorker.runWorker(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorker.run(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue._runWorker(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue.access$100(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._run(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._runMaybeBlocked(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext.run(Unknown Source)
at oracle.bali.ewt.worker.ThreadWorkerQueue$TaskAdapter.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.processTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler$TaskQueue.run(Unknown Source)
at oracle.bali.share.thread.Timer.doRun(Unknown Source)
at oracle.bali.share.thread.Timer.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hi
The last I heard is that 10.1.2.2 is not yet certified for use against E-Business Suite unless your operating system is Linux. Please take a look at this posting on Steven Chan's blog: http://blogs.oracle.com/schan/2007/04/23
The issues you are encountering, particularly the one with the toolbars disappearing, were fixed in patch 5345528 as described on my blog here: http://learndiscoverer.blogspot.com/2006/08/more-to-toolbar-icons-graying-out.html
I would advise you to go for this patch first until Oracle certify 10.1.2.2. for Sun.
Best wishes
Michael -
While installing oracle apps 11.5.10 the post installion check JSP fails
Hi Guys,
While installing oracle apps 11.5.10 on oracle linux OEL4.7 i am facing one post installation check failure i.e JSP CHECK. even i tried aoljtest its getting fail.
I am output of error log file and access log files.
Environment:
Oracle apps version:11.5.10
Os :oracle linux 4.7
bit :32 bit
database : vision type
Error_log file contains
[Thu Aug 23 03:38:27 2012] [error] OPM:Can not find one alive process
[Thu Aug 23 03:38:27 2012] [error] [client 49.248.45.6] File does not exist: /oa_servlets/AppsLogin
[Thu Aug 23 03:38:37 2012] [error] OPM:Can not find one alive process
[Thu Aug 23 03:38:37 2012] [error] [client 49.248.45.6] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
Access_log file contains
173.49.29.80 - - [23/Aug/2012:01:08:08 -0400] "GET /OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/11i/applmgr/visappl/fnd/11.5.0/secure/VIS_ora11i/vis.dbc HTTP/1.1" 404 239
173.49.29.80 - - [23/Aug/2012:01:08:08 -0400] "GET /OA_HTML/US/ICXINDEX.htm HTTP/1.1" 200 3483
49.248.45.6 - - [23/Aug/2012:01:12:38 -0400] "GET /aplogon.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:01:12:40 -0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 404 227
49.248.45.6 - - [23/Aug/2012:01:12:49 -0400] "GET /servlets/weboam/oam/oamLogin HTTP/1.1" 404 234
49.248.45.6 - - [23/Aug/2012:01:16:36 -0400] "GET /FND_WEB.PING HTTP/1.1" 404 218
smtp.ttml.co.in - - [23/Aug/2012:01:19:06 -0400] "GET /servlets/IsItWorking HTTP/1.1" 403 230
smtp.ttml.co.in - - [23/Aug/2012:01:19:11 -0400] "GET /servlets/IsItWorking HTTP/1.1" 403 230
smtp.ttml.co.in - - [23/Aug/2012:01:20:43 -0400] "GET /servlets/IsItWorking HTTP/1.1" 403 230
49.248.45.6 - - [23/Aug/2012:03:38:23 -0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 404 227
49.248.45.6 - - [23/Aug/2012:03:38:27 -0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 404 227
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET / HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET /apptitle.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET /applist.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET /aplogon.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET /appsmed3.gif HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:37 -0400] "GET /servlets/weboam/oam/oamLogin HTTP/1.1" 404 234
49.248.45.6 - - [23/Aug/2012:03:38:44 -0400] "GET /appdet.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:47 -0400] "GET /appdet.html HTTP/1.1" 304 -
Please provide some solution.Please see these docs.
Servlet and JSP Pages return a "Page Not Found" Error After Install of Applications [ID 372096.1]
"Unrecognized Option: -Client,Could Not Create The Java Virtual Machine." With Applications 11i [ID 358061.1]
Receiving ''Internal Server Error'' When Checking Out From Supplier Punchout After Upgrade to Java Development Kit (JDK) 6 [ID 781750.1]
Thanks,
Hussein -
Error while installing Oracle Applications 11i on Windows XP Home
Hi friends,
I am a functional consultant and trying to install oracle apps 11i on my home pc for learning purpose (I made a fresh install of windows for this purpose). I strictly followed the instructions given in following article:
http://mhabib.wordpress.com/2007/03/14/installing-oracle-applications-e-bussiness-11i-on-windows-xp/
Step1 and Step2 complete successfully to 100%, however just before moving to Step3 it gives error: "RW-50004: Error code received when running external process.". I am attaching last part of the log file. Could someone please help me out, because I have checked everything I could. Thanks for reading this:
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 26-MAR-2008 20:40:13
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCkrish))
The command completed successfully
ECHO is off.
Listener krish has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
"runProcess_4"
ChangeServiceConfig succeeded
"runProcess_5"
"Statusstring Creating the database controlfile..."
ECHO is off.
ECHO is off.
Wed 03/26/2008 08:40 PM
ECHO is off.
ECHO is off.
Wed 03/26/2008 08:40 PM
krish_agarwalkk.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : f:\oracle\krishdb\9.2.0
LOCAL : krish
ORACLE_SID :
PATH : f:\oracle\krishdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;f:\oracle\krishdb\9.2.0\bin;f:\oracle\krishdb\9.2.0\jre\1.4.2\bin;f:\oracle\krishdb\9.2.0\jre\1.4.2\bin;f:\oracle\krishdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;f:\oracle\krishdb\9.2.0\bin;f:\oracle\krishdb\9.2.0\jre\1.4.2\bin;f:\oracle\krishdb\9.2.0\jre\1.4.2\bin;F:\WinEBS\startCD\Disk1\rapidwiz\unzip\NT;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\PROGRA~1\CA\SHARED~1\SCANEN~1;C:\PROGRA~1\CA\ETRUST~1;c:\cygwin\bin;C:\Program Files\Microsoft Visual Studio\Common\Tools\WinNT;C:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;C:\Program Files\Microsoft Visual Studio\Common\Tools;C:\VC98\bin;C:\cygwin\bin;;C:\PROGRA~1\COMMON~1\MUVEET~1\030625
LD_LIBRARY_PATH : f:\oracle\krishdb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"f:\oracle\krishdb\9.2.0\appsutil\log\krish_agarwalkk\adcrdb_krish.txt"
ECHO is off.
ECHO is off.
Creating the control file for krish database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 26 20:40:26 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Disconnected
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 26 20:41:11 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
LRM-00109: could not open parameter file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
LRM-00113: error when processing file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "krish"
ERROR at line 1:
ORA-01034: ORACLE not available
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
alter tablespace TEMP add tempfile 'f:\oracle\krishdata/tmp1.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
ALTER DATABASE RENAME GLOBAL_NAME TO "krish.kka.com"
ERROR at line 1:
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Connected to an idle instance.
LRM-00109: could not open parameter file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
LRM-00113: error when processing file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
ORA-01078: failure in processing system parameters
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
ORACLE instance shut down.
Connected to an idle instance.
LRM-00109: could not open parameter file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
LRM-00113: error when processing file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "krish"
ERROR at line 1:
ORA-01034: ORACLE not available
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
alter tablespace TEMP add tempfile 'f:\oracle\krishdata/tmp1.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
ALTER DATABASE RENAME GLOBAL_NAME TO "krish.kka.com"
ERROR at line 1:
ORA-01034: ORACLE not available
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
SP2-0359: memory exhausted
Disconnected
adcrdb.cmd exiting with status 3
"Error returned while creating control files"
There was an error while running the command - f:\oracle\krishdb\9.2.0\temp\krish_agarwalkk\adrundb.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 3
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for krish instanceIt will not install on XP Home, try professional instead.
5.10.2 on windows xp HOME? -
Error in starting services in oracle apps 11i
oracle apps 11i ,OEL 5.
[oracle@apps VIS_apps]$ /u01/apps/viscomn/admin/scripts/VIS_apps/addisctl.sh start
addisctl.sh version 115.14
/u01/apps/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Cannot bind to OAD. Re-starting...
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
/u01/apps/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Registering Discoverer Session
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Registering the Collector
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Applying preferences from file : /u01/apps/visora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Closing down registry..
Memory fault
Registering Discoverer Preference Repository
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
addisctl.sh: exiting with status 1
even i tried applying
set LD_ASSUME_KERNEL
even same result.please see this
EBS R11i - GLIBC_2.0 not defined in file 'libc.so.6' with link time reference (libzip.so) [ID 806345.1]
addisctl.sh fails with Errors : GLIBC_2.0 not defined in file libc.so.6 [ID 383046.1]
Error When Trying To Start Discoverer (Addisctl.Sh) [ID 854976.1]
What should the value of LD_ASSUME_KERNEL be set to for Linux? [ID 377217.1]
:) AppsmAsti :)
Sharing is Caring -
Error while installing oracle apps 11.5.10
Hi all,
I have got errors while installing oracle apps 11.5.10. I have configured all the system parameters.
Unable ti complete instance configuration
RW-50010 error script has returned an error 1
RW-50004 error code received when running external process
Please let me know the solution
Thanks
ManikandanYou would get better answers if you asked in the correct forum.
LCM: 11i Install/Upgrade
Also, it would help if you looked at the logs to find the errors. -
Certificate Issue in web services Using j2ee in oracle apps 11i
Hi all,
I am working with web services integration in oracle apps 11i. I used j2ee technology. I installed j2eesdk-1_4_03 and test with j2eetutorial. I have to integrate third party payment system with web services in oracle apps 11i. I run following commands in putty
build: asant build
packing: asant create-war
deploy: asant deploy-war
client java:
compile: asant build
run: asant run
While i run the "asant run" command, i got below the error
sun.security.validator.ValidatorException: No trusted certificate found
I added third party certification but i got same error which i mentioned above.
Is any certification or settings need for run the web services in ebs.
Thanks
Edited by: 910361 on Nov 1, 2012 7:09 AMHi,
I do the settings according to your advice, i got below error when i run below command to add certificate to keystore.
command:
keytool -import -keystore /usr/j2ee/jdk/jre/lib/security/cacerts -file /usr/Class3G2.cer
Error:
keytool error: java.lang.Exception: Input not an X.509 certificate
Thanks
Edited by: 910361 on Jan 27, 2012 4:38 AM
Edited by: 910361 on Jan 27, 2012 4:39 AM
Edited by: 910361 on Jan 27, 2012 4:39 AM
Edited by: 910361 on Jan 27, 2012 5:29 AM
Edited by: 910361 on Nov 1, 2012 7:09 AM -
Installation of Oracle Apps 11i Realese 5 with 11.5.6 Family Pack
I am having problem starting the installation of this program.......Oracle Apps 11i Realese 5. I have Windows 2000 and would like to do CD installation rather than Stage installation.
I have downloaded and ran the JDK-1_1_8_009-Win. Here are the steps taken: I inserted the Red CD "Start Here" in my CD-ROM, opened the DOS prompt, and changed the C:> prompt to E:> prompt which is my CD-ROM drive, I then typed E:>cd rapidwiz....Enter, this opens E:\rapidwiz>, I then typed rapidwiz.cmd which was supposed to open my Oracle Universal Installer, butI got: E:\rapidwiz>start.\bin\launch.exe.RapidWiz.cL
E:\rapidwiz>
What do I do from here, do I insert the Disk 1 or what, because I have 14 CD's to be installed.Hi Timi,
Nice to see that you're involved in the setup of Oracle Applications 11.5.5. I see that you've run into a few roadblocks and while I am sure that I have a solution to the problem you're facing, it's a tad too long to get into on this forum.
If you could get in touch with me via E-Mail ([email protected]) or call me at 732 423 8023 (I'm available after 8pm EST), I'd be glad to help you out. Forgive me for saying so but the installation process is rather long and I have no desire to outline the entire process here.
Just curious, are you professionally associated with Oracle Applications or does it stem from a personal interest ?
I look forward to hearing from you.
Best Wishes,
Rajesh Aialavajjala -
Tuning Oracle APPS 11i Start with
Hi Hussain/Helios,
I am new to Oracle APPS, and am working oracle apps 11i 11.5.10.2 with 10.2.5.0, the database and application was upgraded by previous dba. which left almost 3-4 months before.
now my question is i want to have a performance tuning for Oracle apps environment, can you please suggest some key points for starting with and some good links for future usage.
Other thing is i have used find command on my linux box and found many log files which are greater than 1000K on apps tier (forms/reports/web), and similiarly db tier (db/admin/concurrent).
can i just remove all these logfiles using os (rm) command and is it feasible with production environment on running mode or is it not feasible and i should use some other ways/etc.
APPS Tier folder locations.
****podappl/admin/PROD/log
****prodora/iAS/Apache/Apache/logs/sec_audit.log
****prodora/iAS/Apache/Jserv/logs/mod_jserv.log
****prodora/iAS/Apache/Jserv/logs/jserv.log
****prodcomn/admin/scripts/PROD_****/sqlnet.log
****prodcomn/admin/log/PROD_****/
****prodcomn/_pages/
****prodcomn/rgf/PROD_****/
****prodcomn/rgf/PROD_****/oam/
DB Tier files folder locations.
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_*****_PROD/log/em-application.log
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_*****_PROD/log/http-web-access.log
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_****_PROD.upgrade/log/http-web-access.log
****oracle/proddb/10.2.0/appsutil/log/PROD_****/StageDBTier_10161830.log
****oracle/proddb/10.2.0/*****_PROD/sysman/log/emoms.log
****oracle/proddb/10.2.0/*****_PROD.upgrade/sysman/emd/sqlnet.log
****oracle/proddb/10.2.0/******_PROD.upgrade/sysman/log/
****oracle/prodappl/admin/PROD/log/For Performance Tuning, right now i have following points with me.
1). Compile APPS Schema in maintenace which i will take.
2). I have checked some Gather Stats/Purge jobs are already scheduled for maintenance.
Please tell me what other Jobs i can schedule using OAM for weekend for All tiers in APPS.
I have been also asked to apply latest patches on PROD APPS/DB/* system, I can check using sql, which patches are applied, but how can i know which patches are required, (don't know about the licensed products with never ask policy here).
Thanks,
RAJ
Edited by: 870344 on Jul 5, 2011 6:36 AMcan you please suggest some key points for starting with and some good links for future usage.Please check below MOS doc:-
A Holistic Approach to Performance Tuning Oracle Applications Systems [ID 69565.1]
Configuring various JVM tuning parameters for Oracle E-Business suite 11i and R12 [ID 567551.1]
Tuning is something that require more analysis less action, first you need to answer:-
1) Why do you need tuning? is it proactive or some incident happend?
2) Where are you facing issues? i.e. which module, form, report or whole application.
3) Number of users facing issues? i.e. is it single user, user at one location or all users.
4) Has something changed in past that might have triggered this need?
Theri are various components involved in tuning that start from :-
1) user machine
2) network
3) Application tier.
4) Database tier.
Application tier can be further divided into:-
1) Apache server(JVM, modplsql, jserv etc etc
2) Form Server
3) Concurrent processing server
4) Discovered if using,
5) XML publisher..
and like wise other component using.
If you are looking to tune then i believe start from application tier first, pick one by one componets, like if your users are facing issues with login then use note that i have provided, if users are not satisifed with time taken to complete concurrent request then you might have to tune it and likewise.
can i just remove all these logfiles using os (rm) command and is it feasible with production environment on running mode or is it not feasible and i should use some other ways/etc.Do not rm files because it might be in use by some process and ti might then not be able to release space, its better to trim the file. do cat file >
Log file you have mentioned can be removed depedning upon your company policy if any.
Thanks,
JD -
Has anyone worked on Apps 11i on Linux ?
What version of Linux is required to install R11i ?
Thanks in advance.You need Kernel version 2.2 or higher. I installed 11i on Redhat 6.1 which has 2.2.12-20 with out much problem. The only thing you might want to down load is the Motif Open Libraries from www.metrolink.com.
These libraies will be needed for bringing up the forms server after installation. Redhat does not ship these lib's with it. -
Hi Bangalorites,
I am residing in Bangalore. I would wish to install Oracle Apps 11i on my Home PC. Can anybody lend me Software CDs (Windows or Linux) and assist me to install the same.
Kindly supply me with your contact infos at [email protected] or 9845390787.
Thanks & Regards,
Shivendra BhatiaHi
I would like to get more information on or
about the oracle release 11i. I have tried the oracle web site for the free downloads but wasn't lucky. Can you help?
Mark -
How to access Oracle Apps 11i forms using Vmware Player?
Hi,
I have installed Oracle Apps 11i on native OS OEL5 Server and guest OS Windows XPP using Vmware Player.Now how to access Oracle Apps 11i forms from Windows XPP using Vmware on my OEL5 Server Desktop?
Thank's
Regard's
RerryHi,
If you mean how to access eBusiness Suite from within the Virtual Machine, then you just navigate to the same URL you normally would. You may need to put the machine alias in your hosts file if you are referencing it via machine name rather than IP address.
If you mean that you want to load the form in forms builder (for example) then you need to FTP the form from server to client (as you normally would) and then open it in your client (XP virtual machine).
If you want to use Workflow Builder (as per your original requirement) then you need to ensure that the TNSNAMES.ora file in the Workflow Builder home has an entry for your instance on Linux, and then you should be able to connect to the database directly.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com
Maybe you are looking for
-
Link between delivery and handling unit split items
Hi All, I have an delivery wit 4 different line items. While creating the Packing we created the Handling units for the delivery. In Handling unit one line item is split into 2 boxes. like handling unit gross weight 1
-
Can't find other computer on network
My laptop is connected to my wireless router (Linksys) by Ethernet. The connection is working because I can get the internet on my laptop just fine, I just updated my Office applications; but I can't see my other, desktop computer for file sharing. I
-
Hi, I'm trying to establish a socket connection to the remote server with an mobile application written in flash builder. I'm using flex 4.5 sdk. While running the code in mobile emulators, the socket connection is working. But after deploying the ap
-
Language OPEN_FORM error in Script
Hi All , I have a form for Purchase order which works from ME23N Tcode. Actually this PO form is copied from Standard one and made some changes. So original lang. is DE and we have copied to all lang.'s and i made some changes in Eng. form and activa
-
If im on the net and I want to save a picture, I have no right click button how do I save a picture? Sorry if this sounds stupid im new to Mac. Thanks, Juls