APPS 11i on Linux
Has anyone worked on Apps 11i on Linux ?
What version of Linux is required to install R11i ?
Thanks in advance.
You need Kernel version 2.2 or higher. I installed 11i on Redhat 6.1 which has 2.2.12-20 with out much problem. The only thing you might want to down load is the Motif Open Libraries from www.metrolink.com.
These libraies will be needed for bringing up the forms server after installation. Redhat does not ship these lib's with it.
Similar Messages
-
Running Apps 11i on Linux with 200 concurrent users
Hi,
Is there anybody out there running a large apps 11i installation (with the
database and middle tier) on Linux ?
We are currently running 11.5.9 Apps with a 9.2 database on Sun kit but I'd
like to investigate Linux/Intel as we are planning to replace our hardware.
We have about 200 concurrent users, with a total of 1800 registered users, using
Financials, i-Procurement and HR.
Thanks
Tony VallisHaving worked extensively on Linux, its true that is is limitied in 32 bit mode to addressing a few GB of memory for each application (It is at least better than windows with its 2/3GB limit), although you can play around with it and memory windows to get more out of it for the database tier.
We have used 1 * 6650 with 8GB RAM running AS 2.1 DB Tier
and 2 * 2650 with 8 GB RAM ruuning AS 2.1 Apps Tier with conc mgrs too.
This was with 11.5.10 and it comfortabley supported 200 users. The servers were 2.8GHz Dual core Xeons. Redhat 3 or 4 would have been better becuase of a file cache issue on the database tier.
Also rememeber to consider Oracle licensing, A faster CPU might cost alot more but when oracle licenses are based on core/cpus then you may save alot more by having the highest power cpus u can (MHz rating not ness cores). Sun T2000 servers are quite nifty too if you want to stay with traditional unix kit but not want the price tag.
When workign at internally in Oracle We quoted one client a 3 * 4 CPU 6650 with 8GB in RAC config with 12 * 2 CPU 2650 with 4GB to support 5000 concurrent users. I wasnt convinced this would work at the time but the client had massively over estimated the number of users they would actually have so all was fine.
If I was doing this now I would go for a single 64bit DB tier with 4 CPUs and lots of memory, I would have lots of small8gb mid tiers 2850's, with a hard ware load balancer in front and a dedicated GB backend network. I would ony go for RAC if I needed the resiliance or had a large number of users e.g. 1000+
All in my opinion and I am in no way suggesting this as a solution for any other customers. Always perform a hardware siazing exercise in conjunction with your hardware vendor (remembering they always want you to buy more hadrware than u need). -
While installatting oracle apps 11i on linux redhat 4 geting following errr
it showing System Utilities check failed with following error
error code:
RW-50011Hi;
This is generic error, please check log file for more details.For log file please check my blog:
http://heliosguneserol.wordpress.com/2010/04/13/log-file-location-for-oracle-e-business-suite-r11/
Also check my blog for installation steps,requirement etc.
http://heliosguneserol.wordpress.com/category/step-by-step-oracle-e-business-suite-installation/oracle-e-business-suite-release-11/
Regard
Helios -
RW-50004 during Apps 11i installation on Linux
Hi,
I am trying to install Oracle Apps 11i on Linux. Main error is can't find libjava.so.
Settings are as follows:
Linux version 2.6.9-89.0.25.0.1.ELsmp ([email protected]) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-11.0.1))
Kernel=2.6.9-89.0.25.0.1.ELsmp
model name : AMD Opteron(tm) Processor 875
Apps version: 11.5.10.2
Error: RW-50004: Error code received...Running APPL_TOP Install Driver for PROD instance
Error encountered during: Step 3 of 5 i.e. Registering iAS ORACLE_HOME with OUI Inventory
Log File: /u01/app/oracle/prodappl/admin/PROD_sid/log/05220624.log
Log file extract:
Executing: /u01/app/oracle/prodcomn/temp/adrunias.sh APPS APPS
STARTED INSTALL PHASE : APPS TECH STACK : Sat May 22 19:50:22 EDT 2010
runProcess_9
Statusstring Registering iAS ORACLE_HOME with OUI inventory
Error: can't find libjava.so.
Errors while registering Oracle Home in the inventory
Code where the error occurs i.e. from adrunias.sh
$JAVA_LOC -mx600M -classpath $CLASSPATH oracle.apps.ad.clone.util.OracleHomeCloner -registerOUI -ohPath /u01/app/oracle/prodora/iAS -ohName APPSIAS_PROD
I tried copying libjava.so to all directories mentioned in LD_LIBRARY_PATH i.e. /usr/lib:/usr/X11R6/lib:/usr/java/jdk1.5.0_22/jre/lib/amd64
Appreciate any help on this.
ThanksHi,
As per the doc 357006.1, I downloaded a patch but even patch installation gives the same error.
As per the 2nd doc 1076893.1, following is the output:
# uname -a
Linux orcl 2.6.9-89.0.25.0.1.ELsmp #1 SMP...EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/redhat-release
Enterprise Linux Server release 5.2 (Carthage)
Not sure if 64-bit OS is causing this or not.
Thanks -
Install instructions for Search Modeler and integrating with Apps 11i
Below are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
[root@aussearchdev ~]# su - oracle
[oracle@aussearchdev ~]$ id
uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startallBelow are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
[root@aussearchdev ~]# su - oracle
[oracle@aussearchdev ~]$ id
uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startall -
Error in starting services in oracle apps 11i
oracle apps 11i ,OEL 5.
[oracle@apps VIS_apps]$ /u01/apps/viscomn/admin/scripts/VIS_apps/addisctl.sh start
addisctl.sh version 115.14
/u01/apps/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Cannot bind to OAD. Re-starting...
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
/u01/apps/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Registering Discoverer Session
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Registering the Collector
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Applying preferences from file : /u01/apps/visora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Closing down registry..
Memory fault
Registering Discoverer Preference Repository
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
addisctl.sh: exiting with status 1
even i tried applying
set LD_ASSUME_KERNEL
even same result.please see this
EBS R11i - GLIBC_2.0 not defined in file 'libc.so.6' with link time reference (libzip.so) [ID 806345.1]
addisctl.sh fails with Errors : GLIBC_2.0 not defined in file libc.so.6 [ID 383046.1]
Error When Trying To Start Discoverer (Addisctl.Sh) [ID 854976.1]
What should the value of LD_ASSUME_KERNEL be set to for Linux? [ID 377217.1]
:) AppsmAsti :)
Sharing is Caring -
Oracle 10g AS pacth for Oracle Apps 11i
Hi everyone,
I have installed Oracle 10g AS (10.1.2.0.2) for Oracle Business Intelligence on Sun Solaris 10 (64 bit) and integrated it with Oracle Apps 11i (11.5.10.2).
Everything seems fine but i am facing problems like
1) Toolbars not appearing correctly sometimes like it is disabled and enables by itself.
2)sometimes clients come accross "Connection with Server lost..." error while taking export (very few).
3) Its giving the error (mentioned at the end) only on one client machine while taking export to Excel.
I have tried installing Oracle 10g AS patch set 2 10.1.2.2 for Solaris but the problem persisits. Is patch set 2 compatible or certified with Oracle Apps 11i? if not then is there any other work around or do i have to wait for some new patch.
Thanx for your inputs.
Najeeb
Java(TM) Plug-in: Version 1.4.2_06
Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\ASHIBEL
Proxy Configuration: Manual Configuration
Proxy: http=EMRPXY1:80,https=EMRPXY1:80,ftp=EMRPXY1:80,gopher=EMRPXY1:80
Proxy Overrides: emrpxy1:80,<local>
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Installed custom security manager
Could not assertPermission PermissionID.SYSTEM for IE
This can cause "Warning : Applet Window" to be displayed when running with IE
attempt 1: adding Protocol.protocol -> rmi
attempt 1: adding default Protocol.timeoutsecs -> 40
attempt 1: adding RMIProtocol.transport -> http
attempt 1: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 1: adding RMIProtocol.hijacksessionid -> 1
attempt 1: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 1: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
attempt 2: adding Protocol.protocol -> rmi
attempt 2: adding default Protocol.timeoutsecs -> 40
attempt 2: adding RMIProtocol.transport -> https
attempt 2: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 2: adding RMIProtocol.hijacksessionid -> 1
attempt 2: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 2: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
Discoverer Model - 10.1.2.48.18
New LOOKUP
Lookup Requested
Performing lookup RMI lookup: http://discoverer.emaar.ae:7777//discoverer/plus
Reading bytes from input stream
Unmarshalling response
Session ID:2007061817102717616
BI Beans Graph version [3.2.2.0.24]
BI Beans Graph version [3.2.2.0.24]
The export/print operation failed
Worker oracle.disco.publish.PublishData@6ffeb, command=ExportData failed with DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0 wrapping exception oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
Error: DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
at oracle.disco.remote.corba.RMIToCorba.convertRemoteException(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface._handleGenericExceptions(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface.getBinaryData(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface.GetBinaryData(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrBinaryExport.xmlUpdateServer(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrCorbaXML.corbaUpdateServer(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.export.ExportInputStream._readBuffer(Unknown Source)
at oracle.disco.model.corbaserver.export.ExportInputStream.read(Unknown Source)
at java.io.InputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at oracle.disco.publish.PublishData._writeBinaryData(Unknown Source)
at oracle.disco.publish.PublishData._exportSheets(Unknown Source)
at oracle.disco.publish.PublishData.runDiscoWorker(Unknown Source)
at oracle.disco.worker.DiscoWorker.runWorker(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorker.run(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue._runWorker(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue.access$100(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._run(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._runMaybeBlocked(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext.run(Unknown Source)
at oracle.bali.ewt.worker.ThreadWorkerQueue$TaskAdapter.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.processTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler$TaskQueue.run(Unknown Source)
at oracle.bali.share.thread.Timer.doRun(Unknown Source)
at oracle.bali.share.thread.Timer.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hi
The last I heard is that 10.1.2.2 is not yet certified for use against E-Business Suite unless your operating system is Linux. Please take a look at this posting on Steven Chan's blog: http://blogs.oracle.com/schan/2007/04/23
The issues you are encountering, particularly the one with the toolbars disappearing, were fixed in patch 5345528 as described on my blog here: http://learndiscoverer.blogspot.com/2006/08/more-to-toolbar-icons-graying-out.html
I would advise you to go for this patch first until Oracle certify 10.1.2.2. for Sun.
Best wishes
Michael -
RW-50011 Error is coming while starting Apps 11i installation in linux(RHEL-ES)
with 30G for WindowsXP and 130G for Linux. I gave partition as 104G for Oracle,12G for root, 1.5G for Swapspace. I checked all the required RPMs to be installed. But while running the start CD I am getting an error.while completion of RDBMS - Disk 1, I am getting error RW-50004 Error. Kindly resolve this issue whoever has mastered over it.
I extend my gratitude in anticipation.
Awaiting reply
VijayOther people has had this problem before, you may want to check for it Re: Error RW50004/RW50011.
Most common solution for this issue has to do with the way ksh is being called from the path envrionment variable, and where the install script assumes where it is.
1. Make soft link of the file from /usr/local/bin/ksh to /usr/bin/ksh and before you start your installation start a session in a ksh environment.
or
2. Alter the search path used by the install script. Not advisable, as you are not suppossed to tamper with Oracle code.
or
3. Copy ksh From /usr/local/bin/ksh to /usr/bin
It is recommended to read the metalink this document Doc ID: 287453.1 "Oracle Applications 11.5.10 - Installation Update Notes for Linux x86 ...". -
Tuning Oracle APPS 11i Start with
Hi Hussain/Helios,
I am new to Oracle APPS, and am working oracle apps 11i 11.5.10.2 with 10.2.5.0, the database and application was upgraded by previous dba. which left almost 3-4 months before.
now my question is i want to have a performance tuning for Oracle apps environment, can you please suggest some key points for starting with and some good links for future usage.
Other thing is i have used find command on my linux box and found many log files which are greater than 1000K on apps tier (forms/reports/web), and similiarly db tier (db/admin/concurrent).
can i just remove all these logfiles using os (rm) command and is it feasible with production environment on running mode or is it not feasible and i should use some other ways/etc.
APPS Tier folder locations.
****podappl/admin/PROD/log
****prodora/iAS/Apache/Apache/logs/sec_audit.log
****prodora/iAS/Apache/Jserv/logs/mod_jserv.log
****prodora/iAS/Apache/Jserv/logs/jserv.log
****prodcomn/admin/scripts/PROD_****/sqlnet.log
****prodcomn/admin/log/PROD_****/
****prodcomn/_pages/
****prodcomn/rgf/PROD_****/
****prodcomn/rgf/PROD_****/oam/
DB Tier files folder locations.
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_*****_PROD/log/em-application.log
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_*****_PROD/log/http-web-access.log
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_****_PROD.upgrade/log/http-web-access.log
****oracle/proddb/10.2.0/appsutil/log/PROD_****/StageDBTier_10161830.log
****oracle/proddb/10.2.0/*****_PROD/sysman/log/emoms.log
****oracle/proddb/10.2.0/*****_PROD.upgrade/sysman/emd/sqlnet.log
****oracle/proddb/10.2.0/******_PROD.upgrade/sysman/log/
****oracle/prodappl/admin/PROD/log/For Performance Tuning, right now i have following points with me.
1). Compile APPS Schema in maintenace which i will take.
2). I have checked some Gather Stats/Purge jobs are already scheduled for maintenance.
Please tell me what other Jobs i can schedule using OAM for weekend for All tiers in APPS.
I have been also asked to apply latest patches on PROD APPS/DB/* system, I can check using sql, which patches are applied, but how can i know which patches are required, (don't know about the licensed products with never ask policy here).
Thanks,
RAJ
Edited by: 870344 on Jul 5, 2011 6:36 AMcan you please suggest some key points for starting with and some good links for future usage.Please check below MOS doc:-
A Holistic Approach to Performance Tuning Oracle Applications Systems [ID 69565.1]
Configuring various JVM tuning parameters for Oracle E-Business suite 11i and R12 [ID 567551.1]
Tuning is something that require more analysis less action, first you need to answer:-
1) Why do you need tuning? is it proactive or some incident happend?
2) Where are you facing issues? i.e. which module, form, report or whole application.
3) Number of users facing issues? i.e. is it single user, user at one location or all users.
4) Has something changed in past that might have triggered this need?
Theri are various components involved in tuning that start from :-
1) user machine
2) network
3) Application tier.
4) Database tier.
Application tier can be further divided into:-
1) Apache server(JVM, modplsql, jserv etc etc
2) Form Server
3) Concurrent processing server
4) Discovered if using,
5) XML publisher..
and like wise other component using.
If you are looking to tune then i believe start from application tier first, pick one by one componets, like if your users are facing issues with login then use note that i have provided, if users are not satisifed with time taken to complete concurrent request then you might have to tune it and likewise.
can i just remove all these logfiles using os (rm) command and is it feasible with production environment on running mode or is it not feasible and i should use some other ways/etc.Do not rm files because it might be in use by some process and ti might then not be able to release space, its better to trim the file. do cat file >
Log file you have mentioned can be removed depedning upon your company policy if any.
Thanks,
JD -
Hi Bangalorites,
I am residing in Bangalore. I would wish to install Oracle Apps 11i on my Home PC. Can anybody lend me Software CDs (Windows or Linux) and assist me to install the same.
Kindly supply me with your contact infos at [email protected] or 9845390787.
Thanks & Regards,
Shivendra BhatiaHi
I would like to get more information on or
about the oracle release 11i. I have tried the oracle web site for the free downloads but wasn't lucky. Can you help?
Mark -
How to access Oracle Apps 11i forms using Vmware Player?
Hi,
I have installed Oracle Apps 11i on native OS OEL5 Server and guest OS Windows XPP using Vmware Player.Now how to access Oracle Apps 11i forms from Windows XPP using Vmware on my OEL5 Server Desktop?
Thank's
Regard's
RerryHi,
If you mean how to access eBusiness Suite from within the Virtual Machine, then you just navigate to the same URL you normally would. You may need to put the machine alias in your hosts file if you are referencing it via machine name rather than IP address.
If you mean that you want to load the form in forms builder (for example) then you need to FTP the form from server to client (as you normally would) and then open it in your client (XP virtual machine).
If you want to use Workflow Builder (as per your original requirement) then you need to ensure that the TNSNAMES.ora file in the Workflow Builder home has an entry for your instance on Linux, and then you should be able to connect to the database directly.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com -
Which Processor Good for Oracle Apps 11i
Hello Folks,
I am planning to buy dell laptop to install oracle Apps 11i,
The dell laptop come with the two processor.
1.AMD Athlon 64 X2 Dual-core Processor
2.Intel® CoreTM 2 Duo Processor
So pls advice me to choose the best one.
Thanks, Raghu.KThe real bottleneck will be disk and memory. I liked the server Opteron processors but was never a fan of the mobile ones. I have always had fantastic performance running 11i and R12 on Centrino or Core 2 duo processors. Get a machine with the latest Santa Rosa chipset, and you can install 4 GB of RAM and have it visible to the OS (at least for Linux). I just recently configured a ThinkPad T61 with OpenSuse 10.3, 4 GB of Ram, 240 GB of disk that is running Apps 11.5.10.2 with 10.2.0.3 database and Apps R12 and Demantra Demand Planning 7.1.1 in an OAS 10.1.3 J2EE and Web Server concurrently. This is also running a KVM Windows virtual machine.
-
Sizing hardware for 11i on linux
Does anybody have any experience/insight sizing hardware for a new 11i install on linux? We've estimated that we'll have about 300 named users, using finance, manufacturing and hr modules. How big/many servers do we start with?
Based on the document provided by Oracle corp. for sizing stated that
70 users per CPU and 8mb memory is required for each user to access Oracle Apps 11i.
So, you can think of 8 processors of 900 MHZ and 16 Gb of memory.
Swap space could be created and single time of physical memory because the physical memory is huge.
Upgradeable option has to be take care in near future requirement.
If you running Production and Demo and Test on the same server in sense that again configuration require to increased up.
The hard ware sizing is only for Apps 11i.
Based on the other requirement to access to the legacy systems and all let me know version of the Oracle enterprise database and no of users could access that and then I can give the requirement.
You can reach me through email: [email protected] so that I could be able to fill your expectation.
Thanks and Regards
Riyaas
Oracle Applications DBA
Kuwait -
Hi,
I have recently installed Oracle Apps 11i on Oracle Linux. I am using this installation to learn about Oracle applications and in particular HRMS.
Now I would like to install the Oracle developer tools (Forms, Reports, SQLPLUS, etc) on a windows PC so that I can access the 11i installed database (I believe version 9i Oracle enterprise 9.2.0.6.0).
I have the following questions
1. Is there a single install that would install all the tools on the PC?
2. Since the database is 9.2.0.6.0, should i install the 9i version of the tools or should i go straight to 10g
3. Which tools should i be installing and is there a link for downloading them?
4. Do i need to install oracle client 9i?
5. Do i need to install anything on the server side (oracle linux) for the tools to work? and are there any links to installation instructions?
I have spent about 3 hours looking up information about what to install and with the different versions, etc it is a bit confusing.
I am not a dba, so my knowledge is not extensive.
Thanks in advance for your help
Steve1. Is there a single install that would install all the tools on the PC?Oracle Developer 6i
2. Since the database is 9.2.0.6.0, should i install the 9i version of the tools or should i go straight to 10gYou are looking for a development tool, so you need to download/install Oracle Developer 6i (which has nothing to do with the database version).
3. Which tools should i be installing and is there a link for downloading them?Oracle Forms Developer/Services 6i Release 2 for Windows 98/NT/2000/XP
http://otn.oracle.com/software/products/forms/htdocs/winsoft.html
4. Do i need to install oracle client 9i?No.
5. Do i need to install anything on the server side (oracle linux) for the tools to work? and are there any links to installation instructions?You need to register your host through OAM or disable the SQLNet restriction so that you can connect to the database. Check the following note for more details:
Note: 291897.1 - 11.5.10 New Features : Managed SQL*Net Access from Hosts
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=291897.1 -
Migrating Apps 11i to new server
Hi Guys,
I have recently been appointed as the DBA at a site that ran Apps 11i for more than a year, without as much as a patch update. Suddenly they needed clones, and all sorts of things to happen. Instead of taking a 3 month patch by patch process, does someone have a methodology, if I build a new server from scratch, install SuSE Linux 9, then a blank 9i DB, and the new patched application layer on top of that, can I "clone" the current system to a new server, data only - is there a white paper / methodology around I can use?
Tx
WillisI beleive in your case you can easily make the clone by applying the rapid clone patch on your 11.5.9 instance. Check the metalink note Note:230672.1. Since you are on 11.5.9 and autoconfig enabled there won't be much complication.
we had a similar kind of situation with one our client. Their hard disks crashed and don't have backup of application tier. What they have is database backup.
What we did is :
-Made a fresh installation of apps withe same instance name and paths
-backedup the new database to different path
-Restored the old database of crashed instance from backup and got the llist of all patches applied previously
- Remove the restored database.
-again restored the fresh database backedup
-Applied all the patches
- Restored the old database of crashed instance from backup
- Did all customization and workarounds
Maybe you are looking for
-
I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
-
How do I prevent Acrobat from encoding # in hyperlinks to %23 when generating a PDF from Word 2010?
Existing posts seem to indicate that the only solution is to manually modify each hyperlink in the generated PDF. This is a tedious and time-consuming process that I would like to avoid at any cost. Is there an alternative? Joe
-
When i plug my iphone in to my laptop it does not show up in devices
i have tried to plug my iphone in to my laptop and download a memo. however, my iphone does not show up in the devices. any thoughts on the glich?
-
I purchased a new Dell Monitor to hook up to my OMni as well as a VGA tu USB cable, how do I set up dual monitors?
-
iMac running 10.8.6 doesn't display entire desktop? Reset display to various options and it doesn't display the entire desktop. (asking for a friend, not my iMac)