While os db migration standrad table raising error

Hi gurus,
My basis team doing os db migration after export when they are trying to import data they are terminating due to problem that at the standrad table SMEN_DATES it is raising error VIOLATION OF PRIMARY KEY. So we checked for the table contents
in that table TYP and ID as primary key fileds but in contents there are entries with same combination of TYP and ID. Now problem is that how to rectify that primary key violation with out modifying data.
Thanks in advance,
Santhi.

It's not feasible to "rectify". The data has to be changed to conform to the database key.

Similar Messages

Error while deriving the currency from table

i am getting the below error while simulating the payroll for india.
Error while deriving the currency from table T001P & Error during Initialization of payroll.
i am SAP HCM Trainee.. practicing at home.

Pls check the currency in table T500C.
You can use TCode OE00 for table maintenance T500C.
Also check whether currency is there in table V_CURC and T510.
Hope this will help.
Regards
Ghouse

Access issues while inserting data in a table in same schema

Hi All.
I have a script that at first creates and then populates a table. My script used to run fine in production environment till few hours back. But all of a sudden, it is popping up error while inserting data into the table .
Error message - "Insufficient Previlages".
Please suggest me what may be the reasons for this kind of error.
Thanks in advance

Sonika wrote:
Hi All.
I have a script that at first creates and then populates a table. My script used to run fine in production environment till few hours back. But all of a sudden, it is popping up error while inserting data into the table .
Error message - "Insufficient Previlages".
Please suggest me what may be the reasons for this kind of error.
1) something changed
2) you are hitting a bug

Error while data shifting from one table to another table

i have two tables.
in one table i dont have constraints.in anothe rtable i have constraints.
my requiremnt is i have to shift data from unconstrained table to constrained table
while shifting data any constaint violation is there system hasto raise error by specifying the error
in below example it should be ename,esal values not null.
i tried with save exception but it gives only error.i want error by mentiong that column names also ie ename,esal is not null
if ename value only null then it should be give ename is null
create table tablea (eno number(10), ename varchar2(20) not null, esal number(5) not null)
create table tabl (eno number(10), ename varchar2(20) , esal number(5) )
DECLARE
TYPE tabl_tab IS TABLE OF tabl%rowTYPE;
tab tabl_tab;
-- create an exception handler for ORA-24381
ERRORS NUMBER;
dml_errors EXCEPTION;
PRAGMA EXCEPTION_INIT (dml_errors, -24381);
BEGIN
SELECT *
BULK COLLECT INTO tab
FROM tabl
WHERE rownum<=2;
-- add '_SR' to the job_id of the most senior employees
FORALL i IN tab.FIRST .. tab.LAST SAVE EXCEPTIONS
insert into tablea values tab(i);
EXCEPTION
WHEN dml_errors
THEN
rollback ; --roll backs all the good records updation
-- Now we figure out what failed and why.
ERRORS := SQL%BULK_EXCEPTIONS.COUNT;
DBMS_OUTPUT.put_line ('Number of statements that failed: ' || ERRORS);
FOR i IN 1 .. ERRORS
LOOP
DBMS_OUTPUT.put_line ( 'Error #'
|| i
|| ' occurred during '
|| 'iteration #'
|| SQL%BULK_EXCEPTIONS (i).ERROR_INDEX
DBMS_OUTPUT.put_line ( 'Error message is '
|| SQLERRM
(-SQL%BULK_EXCEPTIONS (i).ERROR_CODE)
END LOOP;
END;
how to implement that.

it should give error as ename column is not null

OATM error.. while running"Generating Migration commands"

Hi Friends,
I am running 11.5.10.2 on SUn Solaris 10..10gr2 DB..I am facing a problem while running Generating Migration command using OATM menu. I am getting the following error in the log
ORA-10643: Database should be mounted in restricted mode and Exclusive mode
ORA-06512: at "SYS.DBMS_SPACE_ADMIN", line 0
ORA-06512: at "APPS.FND_TS_MIG_UTIL", line 59
ORA-06512: at line 1
After referring to ML#337890.1 and running the script to find products installed in system tablespace, I found out that theres a schema "POS" in SYSTEM tablespace.. I have successfully moved the tables and indexes corresponding to POS schema to another tablespace and changed the default tablespace of POS schema the but tablespace column in fnd_product_installations still shows "POS" schema is in SYSTEM tablespace.. and generating migration commands after moving objects is still giving the same error. Could someone please tell me why I am getting this error and if its possible to update the value in fnd_product_installations or is there an other workaround to get rid of this error
Thanks

Hey Hussein,
I found the following error message in the log file
[10/4/09 9:37:07 AM] [UNEXPECTED] [OPPAQMON:105266] java.sql.SQLException: No mo re data to read from socket
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1160)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:961)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:893)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:382)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1972)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:111 9)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.ja va:2185)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.jav a:2059)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStateme nt.java:2976)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePrepar edStatement.java:656)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStat ement.java:734)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.waitForMessage(OPPAQMonitor.java: 412)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.run(OPPAQMonitor.java:110)
at java.lang.Thread.run(Thread.java:534)
I checked Metalink but i dint get an hits!!
How do i solve this issue?
Thanks
Edited by: user643710 on 05-Oct-2009 11:08

Error while dropping/creating new queue table

Hi,
I am trying to modify an existing AQ setup. In the process, I had to remove a queue and redirect all its subscriptions to another queue.
I get an oracle "sequence does not exist" while trying to drop the queue table. The sequence of operations that I am carrying out is:
disable propagation schedule
unschedule propagation
stop queue
drop queue
drop queue table
The error occurs when the drop statement is executed.
I tried restoring the existing configuration, but got the same error message while trying to add a subscription.
Could you help me with this problem? What am I missing here?
Thanks,
Anupama

In what version of Oracle?
I see a couple of problems assuming you are working with a currently supported version:
1. Never grant CONNECT to anyone: Ever. Grant CREATE SESSION.
2. GRANT CREATE TABLE to AQ;
Go to Morgan's Library at www.psoug.org and look at AQ Demo 1. You should have no problem cutting and pasting your way to where you are trying to go.

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

Error while Inserting data into flow table

Hi All,
I am very new to ODI, I am facing lot of problem in my 1st interface. So I have many questions here, please forgive me if it has irritated to you.
========================
I am developing a simple Project to load a data from an input source file (csv) file into a staging table.
My plan is to achieve this in 3 interfaces:
1. Interface-1 : Load the data from an input source (csv) file into a staging table (say Stg_1)
2. Interface-2 : Read the data from the staging table (stg_1) apply the business rules to it and copy the processed records into another staging table (say stg_2)
3. Interface-3 : Copy the data from staging table (stg_2) into the target table (say Target) in the target database.
Question-1 : Is this approach correct?
========================
I don't have any key columns in the staging table (stg_1). When I tried to execute the Flow Control of this I got an error:
Flow Control not possible if no Key is declared in your Target Datastore
With one of the response (the response was - "FLOW control requires a KEY in the target table") in this Forum I have introduced a column called "Record_ID" and made it a Primary Key column into my staging table (stg_1) and my problem has been resolved.
Question-2 : Is a Key column compulsary in the target table? I am working in BO Data Integrator, there is no such compulsion ... I am little confused.
========================
Next, I have defined one Project level sequence. I have mapped the newly introduced key column Record_Id (Primary Key) with the Project level sequence. Now I am got another error of "CKM not selected".
For this, I have inserted "Insert Check (CKM)" knowledge module in my Project. With this the above problem of "CKM not selected" has been resolved.
Question-3 : When is this CKM knowledge module required?
========================
After this, the flow/interface is failing while loading data into the intermediar ODI created flow table (I$)
1 - Loading - SS_0 - Drop work table
2 - Loading - SS_0 - Create work table
3 - Loading - SS_0 - Load data
5 - Integration - FTE Actual data to Staging table - Drop flow table
6 - Integration - FTE Actual data to Staging table - Create flow table I$
7 - Integration - FTE Actual data to Staging table - Delete target table
8 - Integration - FTE Actual data to Staging table - Insert flow into I$ table
The Error is at Step-8 above. When opened the "Execution" tab for this step I found the message - "Missing parameter Project_1.FTE_Actual_Data_seq_NEXTVAL RECORD_ID".
Question-4 : What/why is this error? Did I made any mistake while creating a sequence?

Everyone is new and starts somewhere. And the community is there to help you.
1.) What is the idea of moving data from stg_1 and then to stg_2 ? Do you really need it for any other purpose other than move data from SourceFile to Target DB.
Otherwise, its simple to move data from SourceFile -> Target Table
2.) Does your Target table have a Key ?
3.) CKM (Check KM) is required when you want to do constraint validation (Checking) on your data. You can define constraints (business rules) on the target table and Flow Control will check the data that is flowing from Source File to Target table using the CKM. All the records that donot satisfy the constraint will be added to E$ (Error table) and will not be added to the Target table.
4.) Try to avoid ODI sequences. They are slow and arent scalable. Try to use Database sequence wherever possible. And use the DB sequence is target mapping as
<%=odiRef.getObjectName( "L" , "MY_DB_Sequence_Row" , "D" )%>.nextval
where MY_DB_Sequence_Row is the oracle sequence in the target schema.
HTH

Error while reading data through External Table!!!

CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
AP

Let's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin

Error while activating data from new table of DSO to active table

HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHY

Hi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM

Error while filling the set up table for 2LIS_11_VAITM

Dear Experts,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code for sales org 9000 does not exist (document 1326)".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
you'll have to enter at least '1' here in your case
it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
(under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

Error while deriving the currency from table T001P.

Hi Friends,
I am trying to run payroll for NZ using schema NZ00 but i am getting an error stating "Error while deriving the currency from table T001P. Error during initialization of Payroll"
I have checked V_T001P, V_T001 and have deleted the personnel area and subarea and again created it but still i am unable to solve this problem.
Could you please help me as to where this error can be corrected.
Thanks,
Manj

About the incidence, the problem might be related to the links between
personnel area, company code and currency set up (table T001P, T500P and
T001).
Please check the following points:
1- Have you assigned the Personnel area to the Company code under SPRO -
IMG -> Enterprise Structure -> Assignment -> Human Resource Management
-> Assignment of Personnel Area to Company Code.
2- SPRO -> Personnel Management -> Personnel Admin -> Basic Settings ->
Determine Currencies (Public Sector Currency Need to be maintained along
with the other node).
3- SPRO- Personnel Management -> Personnel Admin -> Payroll Data ->
Basic Pay -> Define Hourly Rates for several decimal places. (Please
maintain all the nodes).
4- Maintaining the table t500c through transaction code OE00.
Regards
Ramana

Error while inserting data into a table.

Hi All,
I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
Thanx in advance
anirudh

Hi Anirudh,
Seems there is already an entry in the Table with the same Primary Key.
INSERT Statement will give short dump if you try to insert data with same key.
Why dont you use MODIFY statement to achieve the same.
Reward points if this Helps.
Manish

Error while running tablespace migration utility.

Hi,
Am migrating from 11.5.9 to 11.5.10.2
while running the OATM utility $FND_TOP/bin/fndtsmig.pl it prompts for the connecting string and as soon as I give my database name(i.e connecting string) it is exiting with error as
Unable to get the host of the database from <SID>
And am trying to run it with the user as applmgr. Where am I wrong.....??
Thanks in advance,
Patel

Duplicate thread ..
Error while running tablespace migration utility.

Error while reading payroll area D0, table T549S

Hi,
would you know what this kind of error message could mean?
"Error while reading payroll area D0, table T549S"
This is an error while trying to extract payroll data to business warehouse. What should I look for to find the cause of this error?
Thanks in advance,
Mantas

You have to contact the HR consultant in ur tem
Next they might have not mapped the payroll which you are trying
REWARD POINTS

While os db migration standrad table raising error

Similar Messages

Maybe you are looking for