While restoring my iPod touch 4G (iOS 6.1.2), after the "extracting software" step, iTunes says that it cant connect to iPod server. Now my iPod is in recovery mode and I can't do anything. Please Help.
I have Windows 7 installed with the LATEST iTunes software.
I get this message while restoring and now my iPod is in restore mode. When I try to restore it fails after this message pops up. Please tell me a fix to it.
1) I've checked my internet connection. All the sites work perfectly.
2) I've tried it after disabling the windows firewall as well as my antivirus.
3) I've also tried changes with the "hosts" file in Windows>System32>Driveres>etc.
NO HELP WHATSOEVER.
PLEASE HELP.
Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem
Similar Messages
-
I have a brand new iPad 4. I plugged in and it told me that there was new software available. I went to update it and now it tells me "unknown error 1656". Now the pad is in permanent recovery mode and I can't do anything with it. Any info?
SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
i try to restore my iphone but always error. it keep on recovery mode and i can't do anything., i try to restore my iphone but always error. it keep on recovery mode and i can't do anything.
Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!
-
I have gone through all the help I can find on apple and any other sites but the error message is "an unknown error has occured (1) - anyone got any clues not already printed on the usual sites?
Phone out of warranty and contract so unlikely to get a replacement - or am I?
Thanks
NickError -1 indicates a hardware failue. Your phone is broken.
Out of warranty replacement is $149. -
This is the same .ipsw file from which i had installed ios 7.1.1 the very first time.
I assume you are not a developer ,if you were you would know not to post here
In which case you are using stolen software which you are not licenced to use .
We do not assist in such cases
You may well have to wait until iOS8 is released before it works
I doubt you will get any help from an Apple Store genius bar as you have made unauthorised changes to the iOS and also likely voided the warranty -
I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!
Jerricayoung,
you have a 13-inch Mid 2012 MacBook Pro. It’s modern enough that it supports booting into Recovery mode. To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilities menu. Select Disk Utility from that menu; when the Disk Utility window appears, select the bootable volume from the left-hand side of the window. (It’s typically called “Macintosh HD”.) When the volume is selected, some buttons will appear on the right-hand side. If it’s not greyed out, press the Verify Disk button; if it is greyed out, or if it reports on errors that it found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; that will restart your MacBook Pro in its normal mode. With luck, that will be enough to get you to your normal login screen, rather than the white screen. -
i just tried updating my iphone 4 and now my phone is in recovery mode and i dont want to loose anything on my fone someone help please!!!!!
If its stuck in recovery mode then you have to restore it. Hopefully you had a recent backup on Icloud or on your computer that you can apply after restoring it. If so then you shouldn't loose your data.
Just connect it to Itunes and restore it. After it will promt you when your done to restore from backup or as new. If its on icloud unplug the phone and go through the intro screen till you get the same prompt. Sign into icloud and restore backup. -
How can I download apps on my old ipod touch? It tells me I need iPhone3.0 software, but iTunes tells me I have the latest available (software 2.2.1) for my iPod.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
-
My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(
settings - general - usuage - music - delete. Then do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then sync the music back via iTunes. -
Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!
If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.
-
my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!
Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!
-
My Computer is not sensing my ipod touch 4G...i have dowloaded the latest version of itunes (10.2.2) for my windows 7 64 bit edition...somebody help me
http://support.apple.com/kb/ts1567
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
Hello, Im trying to update my ipod 3g 4.2.1 to ios 5.0.1.When I try to update,itunes says that 4.2.1is the lastest sofware for my ipod.I also tried to do it manually(shift+restor)itunes says that the"ipod could not be restore because the fimwire isnot compatible" I need some help on this.
The messages are saying you have a 2G iPOd. Those canonly go to 4.2.1. Apple only made 32 and 64 GB 3G iPOd. A 32 can be either. To further identify yours:
Identifying iPod models
Enter SN hee:
Apple - Support - Check Your Service and Support Coverage -
i found my old ipod and i forgot the passcode. It doesnt have an home button so i dont know how to put it in recovery mode so i can restore it. Ive been using the assisted touch method. But what should i do to put it in recovery mode so i can restore it.
Use this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode -
I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??
Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.
Maybe you are looking for
-
I am trying tp update my itunes to 10.7 and it says that the feature you are trying to use is on a network resource that is unavailable. Enter and alternative path to a folder containing the installation package iT unes.msi It does not appear to be a
-
Hi I have invoked jvm using C++. I called the main method of my application and it is running fine. When I try to invoke another method of the same class that is not static by GetMethodID(..) and then CallVoidMethod(..), the ID is coming out fine but
-
Workflow triger on Purchase requisition creation
Hi .... i m new to Workflows .. i have a scenario that if user create PR then his manager and his assistant manager receive mail to release that PR and when they release PR creator receive that information back .. kindly help me out in this regards A
-
How to install old ios? v.3.0 for ex.
how to install old ios? v.3.0 for ex. for iphone 3g?
-
Help please with saving to jpg automatically
Hello, I have been working with photoshop a while and used to be when I clicked "save as" the ext jpg was there automatically, now it is wanting to save everything as a photoshop extention. How do I get it to go back to saving as jpg autmatically.