While starting up portal server gateway I get an error "cannot read from rp.keystore, unable to read the PKCS key".

The OS is solaris 8 and portal server 3. The first installation went through properly and we had installed many other applications also along with portal server. Then we had to ship the machine to some other city and restarted with same IP address, host address and domain, and also made a LAN without hooking onto the main network. From then on we are facing this problem. Even tried reinstallation a couple of times, after uninstall and deleting/renaming rp.keystore. The main problem looks like gateway not being able to read rp.keystore. The password required for reading it is the admin password which works fine the admin console.By invoking certstore also I am getting the same error.

There is a couple of things I can think of here, one is the permission, you need to install the gateway as root , make sure the gateway and relevant files are installed as root and have the right access permissions.
There should be file called .rppass and this contains the password and this should match the same password that you have used for the admin console.
I would recommend you to use 3.0sp3a instead of 3.0 for better performance and scalability.
HTH ..

Similar Messages

  • While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

    While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

    Neha,
    you can do in two ways.
    1. Enter a valid Division which you configured in the system.
    2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
    Linganna Katigiri

  • Problem while starting Sample POrtal Server

    Hi,
    I have installed Web Logic Platform 8.1 from the bea site. When I try to run the
    Example portal server, it throws following error:
    <23-Jul-2003 12:52:25 o'clock BST> <Error> <JDBC> <BEA-001150> <Connection Pool
    "cgPool" deployment failed with the following error: 0:Could not create pool connection.
    The DBMS driver exception was: SQL-server rejected establishment of SQL-connection.
    Pointbase Server may not be running on localhost at port 9093..> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "p13n_dataSyncDataSource"
    deployment failed with the following error: DataSource(p13n.dataSyncDataSource)
    can't be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "p13n_sequencerDataSource"
    deployment failed with the following error: DataSource(p13n.sequencerDataSource)
    can't be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "p13n_trackingDataSource"
    deployment failed with the following error: DataSource(p13n.trackingDataSource)
    can't be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "ebusinessPool"
    deployment failed with the following error: DataSource(weblogic.jdbc.jts.ebusinessPool)
    can't be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSource"
    deployment failed with the following error: DataSource(cgDataSource) can't be
    created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003 12:52:25
    o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "contentDataSource" deployment
    failed with the following error: DataSource(contentDataSource) can't be created
    with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003 12:52:25
    o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "commercePool" deployment
    failed with the following error: DataSource(weblogic.jdbc.jts.commercePool) can't
    be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "portalFrameworkPool"
    deployment failed with the following error: DataSource(portalFrameworkPool) can't
    be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Alert> <JMS> <BEA-040052> <JMSServer "cgJMSServer" store
    failed to open java.io.IOException: JMS JDBC store, connection pool = <cgPool>,
    prefix = <weblogic>: connection pool does not exist. java.io.IOException: JMS
    JDBC store, connection pool = <cgPool>, prefix = <weblogic>: connection pool does
    not exist at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:359)
    Does any body know the cause of the problem.
    Please help?
    Thanks Aydan

    If you haven't solved this yet, it looks as if your DB server is not
    running, hence any elements that rely on a db server, such as connection
    pools and elements that use those pools such as datasources are not
    going to start correctly.
    It seems that properties are not properly assigned in the
    startPointBase.cmd script on Windows NT (haven't verified behaviour on
    2000 although I know it works out of the box on Solaris). I'd suggest
    starting the pointbase server manually with the correct pointbase.ini
    file and then starting WLS/WLP afterwards.
    Aydan wrote:
    Hi,
    I have installed Web Logic Platform 8.1 from the bea site. When I try to run the
    Example portal server, it throws following error:
    <23-Jul-2003 12:52:25 o'clock BST> <Error> <JDBC> <BEA-001150> <Connection Pool
    "cgPool" deployment failed with the following error: 0:Could not create pool connection.
    The DBMS driver exception was: SQL-server rejected establishment of SQL-connection.
    Pointbase Server may not be running on localhost at port 9093..> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "p13n_dataSyncDataSource"
    deployment failed with the following error: DataSource(p13n.dataSyncDataSource)
    can't be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "p13n_sequencerDataSource"
    deployment failed with the following error: DataSource(p13n.sequencerDataSource)
    can't be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "p13n_trackingDataSource"
    deployment failed with the following error: DataSource(p13n.trackingDataSource)
    can't be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "ebusinessPool"
    deployment failed with the following error: DataSource(weblogic.jdbc.jts.ebusinessPool)
    can't be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSource"
    deployment failed with the following error: DataSource(cgDataSource) can't be
    created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003 12:52:25
    o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "contentDataSource" deployment
    failed with the following error: DataSource(contentDataSource) can't be created
    with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003 12:52:25
    o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "commercePool" deployment
    failed with the following error: DataSource(weblogic.jdbc.jts.commercePool) can't
    be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Error> <JDBC> <BEA-001151> <Data Source "portalFrameworkPool"
    deployment failed with the following error: DataSource(portalFrameworkPool) can't
    be created with non-existent Pool (connection or multi) (cgPool).> <23-Jul-2003
    12:52:25 o'clock BST> <Alert> <JMS> <BEA-040052> <JMSServer "cgJMSServer" store
    failed to open java.io.IOException: JMS JDBC store, connection pool = <cgPool>,
    prefix = <weblogic>: connection pool does not exist. java.io.IOException: JMS
    JDBC store, connection pool = <cgPool>, prefix = <weblogic>: connection pool does
    not exist at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:359)
    Does any body know the cause of the problem.
    Please help?
    Thanks Aydan

  • Error while starting Integrated Weblogic Server - Jdeveloper 11.1.1.4

    I installed Jdevloper 11.1.1.4, and getting the below error while starting Integrated Weblogic Server:
    [Waiting for the domain to finish building...]
    [05:13:34 PM] Creating Integrated Weblogic domain...
    The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully.
    [05:14:53 PM] Error processing Integrated Weblogic domain:
    I've checked for log files under my "C:\Documents and Settings\pramod.gujjeti\Application Data\JDeveloper\system11.1.1.4.37.59.23" directory but no error/exception is traced.
    Then I tried the below:
    Run from command line:
    F:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd "C:\Documents and Settings\pramod.gujjeti\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.j2ee.adrs\CreateDefaultDomain.py"
    " from DOS prompt I got "Error: ADRS_DOMAIN_PASSWORD environment variable not set."
    After I set ADRS_DOMAIN_PASSWORD environment variable (value is weblogic1) the command line is throwing:
    C:\Documents and Settings\pramod.gujjeti>F:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd "C:\Documents and Settings\pramod.gujjeti\Application Data\JDeveloper\sy
    stem11.1.1.4.37.59.23\o.j2ee.adrs\CreateDefaultDomain.py"
    CLASSPATH=F:\Oracle\Middleware\patch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;F:\Oracle\Middleware\patch_jdev1111\profiles\default\sys_manifes
    t_classpath\weblogic_patch.jar;F:\Oracle\Middleware\jdk160_21\lib\tools.jar;F:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic_sp.jar;F:\Oracle\Middleware\wlserver_
    10.3\server\lib\weblogic.jar;F:\Oracle\Middleware\modules\features\weblogic.server.modules_10.3.4.0.jar;F:\Oracle\Middleware\wlserver_10.3\server\lib\webservices.jar;F:
    \Oracle\Middleware\modules\org.apache.ant_1.7.1/lib/ant-all.jar;F:\Oracle\Middleware\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar;;F:\Oracle\Middleware\o
    racle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;F:\Oracle\Middleware\oracle_common\common\wlst\lib\adf-share-mbeans-wlst.jar;F:\Oracle\Middleware\oracle_common\c
    ommon\wlst\lib\adfscripting.jar;F:\Oracle\Middleware\oracle_common\common\wlst\lib\mdswlst.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\auditwlst.jar;F:
    \Oracle\Middleware\oracle_common\common\wlst\resources\igfwlsthelp.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\jps-wlst.jar;F:\Oracle\Middleware\oracle
    _common\common\wlst\resources\jrf-wlst.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\oamap_help.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resour
    ces\oamAuthnProvider.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap_help.jar;
    F:\Oracle\Middleware\oracle_common\common\wlst\resources\ovdwlsthelp.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\sslconfigwlst.jar;F:\Oracle\Middleware
    \oracle_common\common\wlst\resources\wsm-wlst.jar
    PATH=F:\Oracle\Middleware\patch_wls1034\profiles\default\native;F:\Oracle\Middleware\patch_jdev1111\profiles\default\native;F:\Oracle\Middleware\wlserver_10.3\server\na
    tive\win\32;F:\Oracle\Middleware\wlserver_10.3\server\bin;F:\Oracle\Middleware\modules\org.apache.ant_1.7.1\bin;F:\Oracle\Middleware\jdk160_21\jre\bin;F:\Oracle\Middlew
    are\jdk160_21\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\Oracle\Middleware\wlserver_10.3\server\native\win\32\oci920_8
    Your environment has been set.
    CLASSPATH=F:\Oracle\Middleware\patch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;F:\Oracle\Middleware\patch_jdev1111\profiles\default\sys_manifes
    t_classpath\weblogic_patch.jar;F:\Oracle\Middleware\jdk160_21\lib\tools.jar;F:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic_sp.jar;F:\Oracle\Middleware\wlserver_
    10.3\server\lib\weblogic.jar;F:\Oracle\Middleware\modules\features\weblogic.server.modules_10.3.4.0.jar;F:\Oracle\Middleware\wlserver_10.3\server\lib\webservices.jar;F:
    \Oracle\Middleware\modules\org.apache.ant_1.7.1/lib/ant-all.jar;F:\Oracle\Middleware\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar;;F:\Oracle\Middleware\o
    racle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;F:\Oracle\Middleware\oracle_common\common\wlst\lib\adf-share-mbeans-wlst.jar;F:\Oracle\Middleware\oracle_common\c
    ommon\wlst\lib\adfscripting.jar;F:\Oracle\Middleware\oracle_common\common\wlst\lib\mdswlst.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\auditwlst.jar;F:
    \Oracle\Middleware\oracle_common\common\wlst\resources\igfwlsthelp.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\jps-wlst.jar;F:\Oracle\Middleware\oracle
    _common\common\wlst\resources\jrf-wlst.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\oamap_help.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resour
    ces\oamAuthnProvider.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap_help.jar;
    F:\Oracle\Middleware\oracle_common\common\wlst\resources\ovdwlsthelp.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\sslconfigwlst.jar;F:\Oracle\Middleware
    \oracle_common\common\wlst\resources\wsm-wlst.jar;F:\Oracle\Middleware\utils\config\10.3\config-launch.jar;F:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbynet.
    jar;F:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbyclient.jar;F:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbytools.jar;;
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    Creating Default Domain
    Reading template: /F:/Oracle/Middleware/wlserver_10.3/common/templates/domains/wls.jar
    Setting Name to 'DefaultServer'
    Setting ListenAddress to ''
    Setting ListenPort to 7101
    Setting domain administrator to 'weblogic'
    Setting domain password.
    Writing domain: /C:/Documents and Settings/pramod.gujjeti/Application Data/JDeveloper/system11.1.1.4.37.59.23/DefaultDomain/
    Closing template.
    Reading domain: /C:/Documents and Settings/pramod.gujjeti/Application Data/JDeveloper/system11.1.1.4.37.59.23/DefaultDomain/
    Adding domain extension template: /F:/Oracle/Middleware/jdeveloper/common/templates/jdeveloper/adrs_template.jar
    Adding domain extension template: /F:/Oracle/Middleware/jdeveloper/common/templates/domains/jsf_template_1.2.9.0.jar
    Adding domain extension template: /F:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar
    Error: addTemplate() failed. Do dumpStack() to see details.
    Problem invoking WLST - Traceback (innermost last):
    File "C:\Documents and Settings\pramod.gujjeti\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.j2ee.adrs\CreateDefaultDomain.py", line 100, in ?
    File "C:\Documents and Settings\pramod.gujjeti\Local Settings\Temp\WLSTOfflineIni5328235009276840957.py", line 89, in addTemplate
    at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
    at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
    at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:420)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: com.oracle.cie.domai
    n.ConfigGroupsException: Multiple definitions of server-group JRF-ADMIN-SVR are not allowed
    C:\Documents and Settings\pramod.gujjeti>
    Appreciate your help in advance!
    Thanks,
    Pramod Gujjeti

    I could see no helpful resolution of the issue in the mentioned thread. Please let me know if I'm missing anything!

  • Error while starting admin/managed server domain

    Hi,
    I have installed Weblogic 10.3.3 on windows 7 64-bit and created a single domain weblogic configuration wizard. As per my understanding single domain server the purpose of admin as well as managed server.
    Now while starting domain server, I'm getting below error messages:
    E:\Middleware_Home\user_projects\domains\first_domain\bin>setDomainEnv.cmd
    \Java\jre6\lib\ext\QTJava.zip was unexpected at this time.
    E:\Middleware_Home\user_projects\domains\first_domain\bin>startWebLogic.cmd
    \Java\jre6\lib\ext\QTJava.zip was unexpected at this time.
    E:\Middleware_Home\user_projects\domains\first_domain\bin>startManagedWebLogic.cmd
    \Java\jre6\lib\ext\QTJava.zip was unexpected at this time.
    Please help me where I should start looking. There is no log file created in Middleware home. I just started learning Weblogic (3-4 days back).
    Thanks,
    Neeraj
    Edited by: Neeraj Bhatia on Oct 18, 2010 8:11 PM

    set WL_HOME=E:\Middleware_Home\wlserver_10.3
    for %%i in ("%WL_HOME%") do set WL_HOME=%%~fsi
    set BEA_JAVA_HOME=E:\Middleware_Home\jrockit_160_17_R28.0.0-679
    set SUN_JAVA_HOME=E:\Middleware_Home\jdk160_18
    if "%JAVA_VENDOR%"=="Oracle" (
         set JAVA_HOME=%BEA_JAVA_HOME%
    ) else (
         if "%JAVA_VENDOR%"=="Sun" (
              set JAVA_HOME=%SUN_JAVA_HOME%
         ) else (
              set JAVA_VENDOR=Oracle
              set JAVA_HOME=E:\Middleware_Home\jrockit_160_17_R28.0.0-679
    @REM We need to reset the value of JAVA_HOME to get it shortened AND
    @REM we can not shorten it above because immediate variable expansion will blank it
    set JAVA_HOME=%JAVA_HOME%
    for %%i in ("%JAVA_HOME%") do set JAVA_HOME=%%~fsi
    set SAMPLES_HOME=%WL_HOME%\samples
    set DOMAIN_HOME=E:\Middleware_Home\user_projects\domains\first_domain
    for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
    set LONG_DOMAIN_HOME=E:\Middleware_Home\user_projects\domains\first_domain
    if "%DEBUG_PORT%"=="" (
         set DEBUG_PORT=8453
    if "%SERVER_NAME%"=="" (
         set SERVER_NAME=AdminServer
    set DERBY_FLAG=false
    ----

  • Could not create JVM Virtual machine(While starting soa managed server)?

    Hi,
    While starting managed server I am getting following errors:
    Could not commit 1048576KB heap memory at 0x0000000004790000.
    Could not create JVM Virtual machine.
    After above error SOA managed server is to be down.
    Please help me that how can i resolve this issue.
    Thanks
    Dharm

    Hi Dharm,
    This is typically printed when we are short on memory.
    What is OS version and JDK being using here ? 32bit or 64bit ?
    Current Xms and Xmx values ?
    Thanks,
    Sharmela

  • Problem while starting Apache Tomcat Server (Ports already in use)...

    Hi,
    I am using an Eclipse IDE for web service Client creation.. Also I have used Apache Tomcat5.5 Server inorder to run the application*...*
    While starting Tomcat Server, I am getting an error that the port numbers are already in use.
    So, I have changed the port numbers in the Server.xml file.
    But, still it is throwing the same error , even though the port numbers are not in use.
    Can any one please provide some suitable solution for this ASAP....
    I need very urgent and so please provide some solution..
    Thanks in Advance,
    roopa

    Hey...
    Did u start restarting your machine after you changed the ports..
    Is your tomcat server running perfectly after you changed the port number...
    I had a similar prob.. But i jus reinstalled both and gave different port numbers while re-installling.
    Jus give it it a try.. The ports need to be refreshed.. So try rebooting yr machine first !
    All the best !

  • Error while starting Integrated weblogic server

    Hi All,
    I have installed Jdev11.1.1.4 in a new XP system.
    when i am trying to run any application or starting the server instance of Integrated weblogic server i am getting below error.
    Caused by: java.lang.ClassNotFoundException: Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
    Could not find the main class: Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain. Program will exit.
    I followed the link:
    http://andrejusb.blogspot.com/2009/10/how-to-solve-javalangclassnotfoundexcep.html
    and found that public-html folder was also inside Model folder. so in Jdev web-content was also appearing in Model folder.
    i removed the public-html folder from Model folder.
    But still it is giving the same error.
    Please provide any Suggestion is anyone has come across the same issue.
    TIA,
    Vishal
    Edited by: Bob on Mar 7, 2011 1:46 AM

    Hi John,
    i deleted the folder and tried starting the server again but getting the same error.
    I have reinstalled the Jdev11.1.1.4 but still getting the same error as:
    java.lang.NoClassDefFoundError: Data\JDeveloper\system11/1/1/4/37/59/23\DefaultDomain
    Caused by: java.lang.ClassNotFoundException: Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
    Could not find the main class: Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain. Program will exit.
    Exception in thread "main" Process exited.
    Please suggest some solution, i am not able to proceed fruther from this point.
    Thanks,
    Vishal

  • Error while starting Oracle App server

    I installed Oracle App Server
    when i am trying to start App server I am getting following error.
    K:\OAS\opmn\bin>opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=coeserv0:6200
    0 of 1 processes started.
    ias-instance id=ORACOESERVER.coeserv0.wipro.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=10760)
    failed to start a managed process after the maximum retry limit
    Log:
    k:\OAS\opmn\logs\HTTP_Server~1
    I tried to start Apache it is also giving following error.
    K:\OAS\Apache\Apache>apache
    [Tue May 17 17:43:08 2005] [warn] pid file k:/oas/apache/apache/logs/httpd.pid o
    verwritten -- Unclean shutdown of previous Apache run?
    ap_spawn_child: Bad file descriptor
    Couldn't fork child for piped log process
    Note the errors or messages above, and press the <ESC> key to exit. 29...
    K:\OAS\Apache\Apache>
    Amit

    Hi Cema,
    Make sure that httpd.conf file (located at /ORACLE_HOME/Apache/Apache/conf ) has not changed.
    Is your AS running on Linux? ".so" is used in case of linux only and for windows extension should be ".dll"
    Please use the same if your http server is running on windows. HTTP Server documetation may have more details related to this.
    Regards,
    Anuj

  • Log error "Could not load file or assembly 'BarcodeConversion' or one of its dependencies. Access is denied. This code work fine in server 2008 but get this error in server 2012

    This code work fine in server 2008, but get this error in server 2012.  Do yo have any idea?

    Need some more info as to where this is installed and how.
    First thing to try would be to uninstall the solution and reinstall.
    Check the GAC for your assembly as well as web.config.
    If you don't see it in one of those places, something went wrong with the install and you'll need to start over.
    Brandon James SharePoint Developer/Administrator

  • When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed.  The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

    When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
    The server responded with “502”
    The request for account “iCloud” failed. 
    The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
    The request for account “iCloud” failed.
    I am then given the option of staying Online or going Offline.
    Can anyone help me?
    thanks

    Hello b.krushel,
    Thank you for using Apple Support Communities
    Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
    These sections in particular:
    General Troubleshooting
    Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
    Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
    Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
    Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
    Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
    Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
    Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
    Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
    Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of  Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
    In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
    You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
    If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
    Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
    Open Calendar (or iCal).
    Open Calendar (or iCal) Preferences.
    Click Accounts. You should see an account with your iCloud member name entered.
    Turn iCloud Calendars off and back on
    Quit Calendar (or iCal).
    Choose Apple () menu > System Preferences > iCloud.
    Remove the checkmark in the checkbox next to Calendars.
    Close System Preferences and wait about a minute.
    Open System Preferences and choose iCloud.
    Replace the checkmark next to Calendars.
    Close System Preferences.
    Open Calendar (or iCal) and test to see if the issue has been resolved.
    Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    Take care,
    Sterling

  • While executing a jar file I am getting an error

    while exec a jar file i am getting an error
    invalid file (bad magic number): Exec format error
    i tried to execute it with the commnad
    java -jar test.jar
    or by directly too
    ./test.jar

    Than tell me how to launch a jar file I tried different ways like
    java -jar MyJar.jar
    and
    MyJar
    and
    ./MyJar
    but its not worked

  • While syncing iPad with my computer, i get an error message: cannot back-up to this computer

    while syncing iPad with my computer, i get an error message: cannot back-up to this computer. I'd like to know why?  Is it safe to download IOS6 if the ipad is not backed up?

    This is the same computer that I originally synced with the iPad and the first backup worked. Is there any way too solve this problem so I can upgrade to iOS 6

  • While doing cross company code postings I get an error

    Hi experts,
    I have an issue on cross company code postings through FB60. There is a vendor account which has been extended to both company codes. The amount of invoice is Rs.10000 of which 6000 to be accounted in company code 1000 and 4000 in company code 5000. When this is done we get an error 'A unique company code has not been assigned to company number A001'.
    After trying several options, I have found one solution. In the test system I Went to classify FI  document types for document splitting, against document type KR transaction 0300 (Vendor invoice) was there. I changed to 0000 (unspecified posting). Once this was done, I was able to post cross company transactions without any problem.
    I would like to know as to what would be the impact? Would this change create any other issue?
    I request you to give your expert opinion on this.
    Regards,
    Ramkumar B.
    Duplicate thread, therefore it will be locked, please avoid creating different threads for the same subject.
    check the responses in thread While doing cross company code postings I get an error
    FI Moderator

    Dear,
    When you are posting vendor Invoice through FB60 then system creates accounting document "KR" and when document splitting is activated in system the you have to assign Doc type KR to Transaction 0300 and 0001.
    This is standard requirement. There will not be any changes by doing this.
    Hope it is clear..
    Br,Vivek

  • I keep getting an error message saying "There was a problem connecting to the server.  URLs with the type "file:" are not supported."  Can someone help me get rid of it.

    I keep getting an error message saying "There was a problem connecting to the server.  URLs with the type "file:" are not supported"  Can someone help me locate and get rid of this error.

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Maybe you are looking for