While using '8084/gateway/cockpit' my session timeouts frequently

when i am using gateway/cockpit to set destination and to execute OData service, my session timeouts vey frequently.Is there any we can increase the timeout period.Plz help

Chaitanya Bilaware
This issue has been resolved in new release of smp 3.0 SP04 runtime.
Rgrds
JK

Similar Messages

Error while using tranaparent gateways.

Hi All,
I have sql server source and i am using transparent gateways to connect to sqlserver from Oracle(not OWB).
I have created view on Oracle database for the sql server tables. i was able to query the view which i created for sql server sources.
i have created a simple pass through mapping using that view. when i try to deploy that mapping, it is shwoing error message "table or view doesn't exist". when i look into oracle package for the error lines, they are pointing to view which i created for sql server tables.
Please help me ouit what i am missing.
Thanks,
Chandu

Hi All,
I got the solution. I didn't have permissions on the view.
Thank you all.
Chandu

Schema Data Type in SOAP Web Service while using Integration Gateway in SMP 3.0

Hi Experts,
I was working on Integration gateway component of SMP 3.0.3 where we can have oData services which connect to different data source from SMP and finally we have to consume from SMP. Here I have an SOAP Web service where there is Schema Data type which is an xml structure and because of that while doing the data modelling with Design time tools I am not able to map the properties as there aren't any as only the parent level Schema type is available in the SOAP Web Services. Please see the below image for reference :
So now I have 2 inputs no problems for design as such then I have the schema for that which comes as a output response which is where I am facing the issue as we don't have that Data Structure itself so how are we going to map that. I have seen some thin possibilities with Custom Scripts with SMP SP06 where this will help us to process the request and response at runtime with JS/Groovy. So needed some lights on this schema data type on Integration Gateway component of SMP 3.0.3 which we are planning to upgrade to SP06 as well so it will be a good starting point for this as well
Also have concerned my good friend Rakshit Doshi for this as well.
Regards,
Fenil.

Hi All,
Sorry for the late response guys was stuck somewhere else and so couldn't reply to this, see I have below response in SOAP UI
There if we see we have the schema as the whole structure being defined under which we have all the child elements, am also posting the raw response from the soapUI below for better understanding
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <soap:Body>
      <GetMSUserLoginDetailsResponse xmlns="http://tempuri.org/">
         <GetMSUserLoginDetailsResult>
            <xs:schema id="MemberDetails" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
               <xs:element name="MemberDetails" msdata:IsDataSet="true" msdata:UseCurrentLocale="true">
                  <xs:complexType>
                     <xs:choice minOccurs="0" maxOccurs="unbounded">
                        <xs:element name="Table">
                           <xs:complexType>
                              <xs:sequence>
                                 <xs:element name="RECID" type="xs:string" minOccurs="0"/>
                                 <xs:element name="FNAME" type="xs:string" minOccurs="0"/>
                                 <xs:element name="LNAME" type="xs:string" minOccurs="0"/>
                                 <xs:element name="CUSTNO" type="xs:decimal" minOccurs="0"/>
                                 <xs:element name="MEMTYP" type="xs:decimal" minOccurs="0"/>
                                 <xs:element name="MEMTYPENAME" type="xs:string" minOccurs="0"/>
                                 <xs:element name="CUSTTYP" type="xs:decimal" minOccurs="0"/>
                                 <xs:element name="EMAIL" type="xs:string" minOccurs="0"/>
                                 <xs:element name="MEMPASSWORD" type="xs:string" minOccurs="0"/>
                                 <xs:element name="ISDEBIT" type="xs:decimal" minOccurs="0"/>
                                 <xs:element name="PARENTID" type="xs:string" minOccurs="0"/>
                                 <xs:element name="CHILDOF" type="xs:string" minOccurs="0"/>
                                 <xs:element name="CUSTTYP1" type="xs:string" minOccurs="0"/>
                                 <xs:element name="ZONEID" type="xs:int" minOccurs="0"/>
                                 <xs:element name="EMAILFOOTERDETAIL" type="xs:string" minOccurs="0"/>
                              </xs:sequence>
                           </xs:complexType>
                        </xs:element>
                        <xs:element name="Table1">
                           <xs:complexType>
                              <xs:sequence>
                                 <xs:element name="ErrorCode" type="xs:string" minOccurs="0"/>
                                 <xs:element name="ErrorDesc" type="xs:string" minOccurs="0"/>
                              </xs:sequence>
                           </xs:complexType>
                        </xs:element>
                     </xs:choice>
                  </xs:complexType>
               </xs:element>
            </xs:schema>
            <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
               <MemberDetails xmlns="">
                  <Table diffgr:id="Table1" msdata:rowOrder="0">
                     <RECID>97101-101-0000057069</RECID>
                     <FNAME>Fenil</FNAME>
                     <LNAME>Doshi</LNAME>
                     <CUSTNO>1042231</CUSTNO>
                     <MEMTYP>42</MEMTYP>
                     <MEMTYPENAME>Management</MEMTYPENAME>
                     <CUSTTYP>8</CUSTTYP>
                     <EMAIL>[email protected]</EMAIL>
                     <MEMPASSWORD>as</MEMPASSWORD>
                     <PARENTID>97101-101-0000057069</PARENTID>
                     <CUSTTYP1>Zone</CUSTTYP1>
                     <ZONEID>2</ZONEID>
                     <EMAILFOOTERDETAIL><![CDATA[<strong></strong><br />]]></EMAILFOOTERDETAIL>
                  </Table>
                  <Table1 diffgr:id="Table11" msdata:rowOrder="0">
                     <ErrorCode>100</ErrorCode>
                     <ErrorDesc>Login Successful.</ErrorDesc>
                  </Table1>
               </MemberDetails>
            </diffgr:diffgram>
         </GetMSUserLoginDetailsResult>
      </GetMSUserLoginDetailsResponse>
   </soap:Body>
</soap:Envelope>
So we have the data but as a xml Structure which is nothing but schema and is my Eclipse while mapping while defining response type it gives me just an schema as the property.
Regards,
Fenil.

Session timeout while in a bounded taskflow.

Hi all,
I have ADFSecurity configured on project.
If a session timeout occurs while we are in view1,(click dialog ok button) is redirect to login.
If a session timeout occurs while we are in some-btf,(click dialog ok button) isn't redirect to login. White page with text Session expired appears.
How can we redirect to login when a session timeout occurs while we are in a bounded TF?
I already try to add servlet filter on the FacesServlet, but when i click on the ok button, the filter isn't called.
Using JDev 12.1.3
Thanks in advance.

Session expiry has changed in 12.1.3 (see https://java.net/jira/browse/ADFEMG-264).
Have you configured the session timeout warning?
How?
Do you use the filter approach?
Have you installed an error handler in the bounded task flow?
Timo

Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

<i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

In Flex Application Session out while export to excel while using navigateToURL _Self ?

Hi,
I am using Flex 3.0 and facing one problem session out while export to excel in Live server not on localhost .
I have Used navigateToURL (url, "_self"); export to excel. While url is sevrlet call.
In localhost(tomcat) everything is working fine while another server or live in weblogic server, my session Is Getting Lost and User is re-directed to login screen again.
what to do to resolve this issue.
while I tried to use _blank instead of _self then session Is getting preserved but its opening blank new window which user will not accept necessary page.
please Suggest what to do to preserve The session while using _self ..
waiting for quick reply.
Regards,
prabhat

I'm not using Flex, but the following preserves session in Flash:
var url = "http://" + WebServerIPAddress + "/" + ApplicationName + "?data=" + datavalue;
var cmd:String = "window.open('" + url + "','win','height=768,width=1024,toolbar=no,scrollbars=yes');";
var request:URLRequest = new URLRequest("javascript:" + cmd + " void(0);");
navigateToURL(request, "_self");

JSP Session Timeout in multiple pages (iframes used)

Hi,
Here is my scenario. I have a JSP Page i.e. A.jsp in which I am setting a session timeout to 3 minutes. I also have another JSP included i.e. B.jsp in the same page (A.jsp) using the following code i.e.
<IFRAME SRC="B.jsp" width="100%" height="800" frameborder="0" align="center">
         
</IFRAME>I am also setting a session timeout to 1 minute in the B.jsp. Now if the session timeout in one of the pages i.e. A.jsp or B.jsp I want to route to a different page i.e. C.jsp.
Now my problem is if the session timeouts in the B.jsp the C.jsp is shown inplace of the B.jsp page inside A.jsp. Means A.jsp still shows it's content at top and under it C.jsp is shown. I want to route to C.JSP page if a session timeouts in A.jsp or B.jsp and only show C.jsp.
Any help is appreciated.
Thanks

Where exactly I put the javascript. Here is currently I am checking for the session timeout:
String error = (String) request.getAttribute("Error");
    if (error != null)
        out.write("<center><strong>");
        out.write("<font color=\"Red\">");
        out.write(error);
        out.write("</font>");
        out.write("</strong></center>");
    response.setHeader("Cache-Control","no-cache"); //forces caches to obtain a new copy of the page from the origin server
    response.setHeader("Cache-Control","no-store"); //directs caches not to store the page under any circumstance
    response.setDateHeader("Expires", 0); //causes the proxy cache to see the page as "stale"
    response.setHeader("Pragma","no-cache"); //HTTP 1.0 backward compatibility
    String userName = (String) session.getAttribute("User");
    if (null == userName)
        request.setAttribute("Error", "Session has ended. Please login.");
        RequestDispatcher rd = request.getRequestDispatcher("C.jsp");
        rd.forward(request, response);
................The same code is in A.jsp and B.jsp. If I want to use the javascript to check if it's the top frame or not and redirect properly where exactly I need to put that code.
Thanks

Error re-logging in after session timeout using form-based authentication

Hello,
We have a web app configured for form-based authentication. When the session times out, we're redirected to our login page as expected. However, after re-logging in, we are not redirected to the desired page (e.g., /faces/OurMainPage.jspx) but to /afr/page_lev_idle.gif.
Do we have to do anything special for session timeouts?
Thanks,
Rico

Some extra information that might help:
After re-logging in and we're in /afr/page_lev_idle.gif, we hit the browser Back button (showing the login page again) and then hit the browser Refresh/Reload button and voila we're at the page we expect to be.
Rico

Error while using session xsd format

Hi,
I am new to toplink. I am trying to use the session.xml as follows
<?xml version="1.0" encoding="UTF-8"?>
<toplink-sessions version="11g Release 1 (11.1.1.0.0)" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<session xsi:type="server-session">
<name>default1</name>
<server-platform xsi:type="oc4j-1013-platform"/>
<event-listener-classes/>
<primary-project xsi:type="xml"/>
<login xsi:type="database-login">
<platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</platform-class>
<user-name>user</user-name>
<password>A65D5C33FF49656730F827DEDE41ACDE647A7A01F9C16C7D</password>
<sequencing>
<default-sequence xsi:type="table-sequence">
<name>Default</name>
</default-sequence>
</sequencing>
<driver-class>oracle.jdbc.OracleDriver</driver-class>
<connection-url>jdbc:oracle:thin:@sta:5521:changes</connection-url>
<bind-all-parameters>true</bind-all-parameters>
</login>
<connection-pools>
<read-connection-pool>
<name>ReadConnectionPool</name>
</read-connection-pool>
<write-connection-pool>
<name>default</name>
</write-connection-pool>
</connection-pools>
<connection-policy/>
</session>
</toplink-sessions>
when I acquire the unit of work etc, things are fine. But somehow the client session is giving the error as follows
Database: Oracle Version: Oracle Database 11g Enterprise Edition Release 11.1.0.2.0 - Beta
With the Partitioning and Data Mining options
     Driver: Oracle JDBC driver Version: 11.1.0.0.0-Alpha
[TopLink Finest]: 2007.06.14 01:59:06.341--ServerSession(26200506)--Thread(Thread[main,5,main])--sequencing connected, state is Preallocation_Transaction_NoAccessor_State
[TopLink Finest]: 2007.06.14 01:59:06.341--ServerSession(26200506)--Thread(Thread[main,5,main])--sequence CONTEXT_SEQ: preallocation size 50
[TopLink Finest]: 2007.06.14 01:59:06.341--ServerSession(26200506)--Thread(Thread[main,5,main])--sequence ORCHFAILEDEVENT_SEQ: preallocation size 50
[TopLink Finest]: 2007.06.14 01:59:06.341--ServerSession(26200506)--Thread(Thread[main,5,main])--sequence ORCHEVENT_SEQ: preallocation size 50
[TopLink Finest]: 2007.06.14 01:59:06.372--ServerSession(26200506)--Thread(Thread[main,5,main])--sequence CONTEXTVAL_SEQ: preallocation size 50
[TopLink Finest]: 2007.06.14 01:59:06.372--ServerSession(26200506)--Thread(Thread[main,5,main])--sequence ORCHPROCESS_SEQ: preallocation size 50
[TopLink Info]: 2007.06.14 01:59:06.372--ServerSession(26200506)--Thread(Thread[main,5,main])--default login successful
[TopLink Finer]: 2007.06.14 01:59:06.372--ServerSession(26200506)--Thread(Thread[main,5,main])--client acquired
[TopLink Finer]: 2007.06.14 01:59:06.372--ClientSession(28117308)--Thread(Thread[main,5,main])--acquire unit of work: 18518800
[TopLink Finest]: 2007.06.14 01:59:06.981--UnitOfWork(18518800)--Thread(Thread[main,5,main])--Register the new object oracle.iam.platform.context.dao.Context@4c94e5
[TopLink Finer]: 2007.06.14 01:59:06.981--UnitOfWork(18518800)--Thread(Thread[main,5,main])--begin unit of work commit
[TopLink Finer]: 2007.06.14 01:59:06.981--ClientSession(28117308)--Connection(18012078)--Thread(Thread[main,5,main])--begin transaction
[TopLink Finest]: 2007.06.14 01:59:06.981--ClientSession(28117308)--Thread(Thread[main,5,main])--Execute query DataModifyQuery()
[TopLink Fine]: 2007.06.14 01:59:06.981--ClientSession(28117308)--Connection(18012078)--Thread(Thread[main,5,main])--UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?
     bind => [50, CONTEXT_SEQ]
[TopLink Warning]: 2007.06.14 01:59:07.778--ClientSession(28117308)--Thread(Thread[main,5,main])--Local Exception Stack:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 070411)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist
Error Code: 942
Call:UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?
     bind => [50, CONTEXT_SEQ]
Query:DataModifyQuery()
The databse is up and running since same works if I use the DTD format for sessions.xml.
Is there something wrong with the table qualifier that I am using? Also what kind of login information should I specify in the map file? It would be great if somebody could tell me whats wrong/ point me to the correct info/docs.

You are getting an error stating the table "SEQUENCE" does not exist. From the log, it shows you are registering a new object, and this object is set to use table sequencing, which requires a Sequence table in the database.
http://www.oracle.com/technology/products/ias/toplink/doc/1013/main/_html/prjdaun007.htm
has information on different types of sequencing available in TopLink.
Best Regards,
Chris

Session Timeouts issue massively frustrating

I am getting session timeouts when logged into my netmail & trying to compose emails. It happens constantly, sometimes immediately after logging in, sometimes 5 minutes into a session, sometimes 2 minutes into a session. It is completely random timing-wise. It kicks me all the way back out to the login and I've lost whatever I've done since the last "save to draft".
It is extremely frustrating as you can't even get a simple 10-15 line email drafted without losing work and having to log back in.
This issue appears to be intermittent as I've had this problem off and on for months now. It will happen for a while, then stop, then start happening again.
As a software developer by trade, I suspect someone is occassionally re-introducing the bug by using an old peice of code as a baseline, which then eventually gets fixed, only to have that same developer re-introduce the bug again later. I noticed this issue beginning when Verizon switched over to this newer netmail system from the old one (maybe a year or so ago?).
I'm running on IE 7, in an environment where my browser and/or network does not change so the intermittent issues can't be blamed on my environment.

Workflow #2:
Login to my account
Click view all email
Open Drafts Folder
Open draft email response
Select "Send" to send email (total in session time of 30 seconds)
On screen reload, where I would expect to see some sort of indication that my email was successfully sent, instead the system throws session time out message and kicks me out.
I have no idea if my email was successfully sent or not.
Workflow #3:
Login to my account
Click view all email
Attempted to open the first new email in my inbox (total time in session <15 seconds)
System throws session timeout error and kicks me out to the main login.
There is obviously something going on with your session holding code. The session variable is not being passed correctly or something but it's very, very frustrating to spend 30-45 minutes trying to type out a couple of lines, particularly when you have multiple important activities going on that you need to respond too via email.

Enable Session Timeout with 802.1X authentication help

I have a scenario where there are 3 controllers with flex connect enabled. I am broadcasting an 802.1x WLAN through all 3 controllers, "WLAN A". WLAN A on Controller 1 and Controller 2 have "enable session timeout" checked and set for 1800s. Controller 3 does not have this feature enabled. In my deployment, I am connecting tablet PC's to the wireless network. All the tablets between the sites using Controllers 1, 2 and 3 were functioning fine while connecting to the 802.1x, but just recently, the tablets conneting to AP's on Controller 3 are not able to connect anymore. Is this an issue with the tablets not renewing authentication encryption? Not really sure why the tablets originally connecting to WLAN A are no longer doing so. Other WLAN's are functioning fine and the tablets are able to connect to the PSK WLAN's. Thanks
Best Regards,
Sean

it's hard to tell from the description, you'll need to do some troubleshooting to find out.
Does this only happen when a user roams to Controller 3?
You'll want to debug the client, and the mobility handoff
Does this happen on a new connection on Controller 3?
debug the client and the aaa process.
I'd also take a look at the logs on your AAA server and see if it is showing an error when Controller 3 tries to auth a user.
Steve

I am Getting the classcast error while using the webservice client

Hi ,
Iam getting classcast exception while trying to get the connection Object throurh the webservice client.
The details are:
the ra.xml
<resourceadapter-version>1.6</resourceadapter-version>
<resourceadapter>
<resourceadapter-class>oracle.apps.contactCenter.mct.model.connector.CCAResAdapterImpl</resourceadapter-class>
<outbound-resourceadapter>
<connection-definition>
<managedconnectionfactory-class>oracle.apps.contactCenter.mct.model.connector.CCAMangConnFactImpl</managedconnectionfactory-class>
<connectionfactory-interface>oracle.apps.contactCenter.mct.publicModel.connector.MCTConnectionFactIF</connectionfactory-interface>
<connectionfactory-impl-class>oracle.apps.contactCenter.mct.model.connector.CCAConnectionFactImpl</connectionfactory-impl-class>
<connection-interface>oracle.apps.contactCenter.mct.publicModel.connector.MCTConnectionIF</connection-interface>
<connection-impl-class>oracle.apps.contactCenter.mct.model.connector.CCAConnectionImpl</connection-impl-class>
</connection-definition>
<transaction-support>NoTransaction</transaction-support>
<reauthentication-support>false</reauthentication-support>
</outbound-resourceadapter>
</resourceadapter>
The weblogic-ra.xml
<enable-access-outside-app>true</enable-access-outside-app>
<outbound-resource-adapter>
<connection-definition-group>
<connection-factory-interface>oracle.apps.contactCenter.mct.publicModel.connector.MCTConnectionFactIF</connection-factory-interface>
<connection-instance>
<jndi-name>MctEIS11/connFctryCCA</jndi-name>
<connection-properties>
<pool-params>
<initial-capacity>5</initial-capacity>
<max-capacity>10</max-capacity>
<capacity-increment>1</capacity-increment>
</pool-params>
</connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
The web.xml
<servlet>
<servlet-name>MyWebService1SoapHttpPort</servlet-name>
<servlet-class>myapp.Class1JCA</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>MyWebService1SoapHttpPort</servlet-name>
<url-pattern>/MyWebService1SoapHttpPort</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
</web-app>
The client is
Context m_context;
MCTConnectionIF m_connection = null;
Hashtable env = new Hashtable();
env.put( Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory" );
env.put(Context.PROVIDER_URL, "t3://localhost:7101");
try {
m_context = new InitialContext(env);
System.out.println("Got the context objNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN");
MCTConnectionFactIF m_cxFactory = null;
Object objFactory = null;
objFactory = m_context.lookup("MctEIS11/connFctryCCA");
System.out.println(objFactory.toString());
m_cxFactory = (MCTConnectionFactIF)objFactory;
System.out.println(m_cxFactory.toString());
m_connection = (MCTConnectionIF)m_cxFactory.getConnection(); //
When i run this i am getting the exception as
Entering!!!!!!!!!!!!!!!!!!!!!
Got the context objNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
[oracle.apps.contactCenter.mct.model.connector.CCAConnectionFactImpl@14bc17f|mailto:oracle.apps.contactCenter.mct.model.connector.CCAConnectionFactImpl@14bc17f]
java.lang.ClassCastException: oracle.apps.contactCenter.mct.model.connector.CCAConnectionFactImpl cannot be cast to oracle.apps.contactCenter.mct.publicModel.connector.MCTConnectionFactIF
at myapp.Class1JCA.GetConnection(Class1JCA.java:47)
I have checked that the jar files are matching in both client an connector side
Please help me on this

Is that ever running ? Where/how did you installed tuxedo ? Which OS user was used for tuxedo install ?
Nicolas.

Sso session timeout per partner application

Hello,
I was just wondering if it is possible to configure SSO session timeouts per partner application? I'm looking to log out users of a particular application after 15 minutes, but don't want this change to affect any of my other SSO enabled applications. Is this possible?
Thanks,

Hi,
I do not think so, you can not specify specail parameter for one application in SSO.
Why because SSO is one component (within your Infra) through which you logon different apps.
Another solution may be it will expensive is that you 'll need to use different infra for this specific application.
Regards,
Hamdy

Session Timeouts and SmbServer

Hi,
When having iFS mapped to a network drive (via SMB), the SMB server
is unable to recover from a timeout of the LibrarySession. The network
drive then seems to be empty and doing a refresh within explorer
doesn't help either. The only thing that helps, is remapping the
network drive.
Within Node.log of iFS I see this stacktrace.
7/10/02 9:02 AM SmbServer: oracle.ifs.common.IfsException
oracle.ifs.common.IfsException: IFS-21000: Session is not connected or has timed-out
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at oracle.ifs.common.IfsException.<init>(Compiled Code)
at oracle.ifs.common.IfsException.<init>(Compiled Code)
at oracle.ifs.common.IfsException.<init>(Compiled Code)
at oracle.ifs.beans.LibraryObject.verifyConnected(Compiled Code)
at oracle.ifs.beans.Folder.findPublicObjectByPath(Compiled Code)
at oracle.ifs.beans.FolderPathResolver.findPublicObjectByPath(Compiled Code)
at oracle.ifs.beans.FolderPathResolver.findPublicObjectByPath(Compiled Code)
at oracle.ifs.protocols.smb.server.DbTree$DbQuery.<init>(Compiled Code)
at oracle.ifs.protocols.smb.server.DbTree.getQuery(Compiled Code)
at oracle.ifs.protocols.smb.server.ComTrans.trans2FindFirst(Compiled Code)
at oracle.ifs.protocols.smb.server.ComTrans.replyTransaction2(Compiled Code)
at oracle.ifs.protocols.smb.server.ComTrans.process(Compiled Code)
at oracle.ifs.protocols.smb.server.ComSmb.handleSmbMessage(Compiled Code)
at oracle.ifs.protocols.smb.server.SmbThread.handleNbMessage(Compiled Code)
at oracle.ifs.protocols.smb.server.SmbThread.readPackets(Compiled Code)
at oracle.ifs.protocols.smb.server.SmbThread.run(Compiled Code)
This behavior actually causes us big problems when editing files via MS Office.
Fortunately Office is able to still save it's data using some generated filename.
(At least until now I could not create any data loss)
But then you have to close it, remap then network drive, rename the file and then
reopen the file. This is big trouble to users, which are not familiar with mapping
network drives and renaming files with extensions.
Is there a way to make the SmbServer keep the LibrarySession alive, as long as
the network drive is mapped ?
Regards,
Jens Lorenz

Workflow #2:
Login to my account
Click view all email
Open Drafts Folder
Open draft email response
Select "Send" to send email (total in session time of 30 seconds)
On screen reload, where I would expect to see some sort of indication that my email was successfully sent, instead the system throws session time out message and kicks me out.
I have no idea if my email was successfully sent or not.
Workflow #3:
Login to my account
Click view all email
Attempted to open the first new email in my inbox (total time in session <15 seconds)
System throws session timeout error and kicks me out to the main login.
There is obviously something going on with your session holding code. The session variable is not being passed correctly or something but it's very, very frustrating to spend 30-45 minutes trying to type out a couple of lines, particularly when you have multiple important activities going on that you need to respond too via email.

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

While using '8084/gateway/cockpit' my session timeouts frequently

Similar Messages

Maybe you are looking for