WhileCopying from an existing document to change parameter value settings

Hello,
is there any option in sap while creating a purhase requisition by copying from an existing Prequisition and change the value?.

easiest are steps 1) and 2) :)
make copy of your document, add new blank page on the end, select all pages without last - click delete icon :)
next - delete all MasterPages
next - redefine page size, margins, add MasterPages, etc.
now - you can copy&paste your texts from old document :)
robin
www.adobescripts.com

Similar Messages

Copying from an existing document to change parameter value

Hello guru's,
Is there any option to make change to the parameter values while creating a purchase requisition bycopying from an existing purchase requisition document.
Full points for the useful sol

Hello Michael,
welcome to the Pages Discussions. The easiest way is, to show in both documents the thumbnail view (menu: "View/Show Thumbnail View"), select the page in the thumbnail view you want to copy and use the shortcut [command]+[C] or the menu item "Edit/Copy". Than make the document in which you want to paste the active one, click once into the thumbnail view and use the shortcut [command]+[V] or the menu item "Edit/Paste" to paste the copied page into the document.
I truth you have copied and pasted a section. In your case the section contains only one page. You can identify sections by the yellow frame in the thumbnail view. All styles will be copied, too. But be aware, that same named styles will be overwritte in the styles drawer. In your pasted section, the styles will stay the same like they were before pasting. But you have to create new styles of this pasted page to have them in the styles drawer for later reuse.
Only if you need to copy parts of single pages out of sections you have to select the content in groups of:
1) The text in the main text area (you can see it in the middle between the header and the footer by showing the layout guides with the menu item "View/Show Layout") and the inline (move with text) objects in it.
2) The Objects of the Master Page. Because if you paste them into a new page they will be fix positioned (free movable) objects.
3) The fix positioned objects.
If you need to copy an entire page out of a section, separate the page first by splitting it with the menu item "Insert/Section Break" from the rest of the section. Than do the copy and paste session I mentioned first in this post.

How do I create a fillable form from an existing document (PDF, Word, etc)?

How do I create a fillable form from an existing document (PDF, Word, etc)?

In Acrobat 11 you'd select: Tools > Forms > Edit
to go into form editing mode. You'll see the tools that are available, thought it may prompt you to autodetect the fields. I usually don't do this, preferring to create them myself.

Can I import (or create) default Lightroom settings from an existing document?

Can I import (or create) default Lightroom settings from an existing document and save them? Make them a personal default set opening with all future LR catalogs?

Thank you, John. That brings up the question: How to build a template?
BTW, I'm not trying to duplicate a catalog; moving it to a larger drive. When opening the newly moved catalog in LR, my former settings (identity plate, defaults, etc.) didn't migrate, though I copied the LR settings folder and its contents into the new location (drive) and opened my develop presets.

How to make a template from an existing document on my ipad Air 2 using word

I want to know if it's possible to make make a template from an existing document on my ipad Air 2 using the free microsoft word app.
Thank you

RAW import is not yet supported. Just guessing that this is what you were trying . - Guido

Cannot Change Parameter Value in afterParameterFormTrigger

I am unable to change parameter values in the afterParameterFormTrigger. All of the parameters are defined as global variables in the default package.
What I am trying to do is this:
In RDFs, I would have place holder or formula columns at the top level of the data model (outside of any query group), and the values of these would appear one time just within the root element of the XML data.
I saw that, with data templates, the parameters appear one time within the root element, so I thought I could just populate these in the default package, but it does not seem to let me. Is this possible?
If this is not possible, how can I do the equivalent of the place holder column (outside of any query in the RDF) that will output one value within the root element?
Thanks,
Kurz

Please find the URL which causes issue .
I am not able to invoke the dispatch action in struts.
/11/09 15:36:03 EFLBuilder: [instance=152748_BUILDERKIT_777946304, id=115210371784,4] ERROR: AbstractResourceRenderer.renderBody - Resource
"/seminarDetails.mcs;jsessionid=0ad16e5530d73bf00b218e744ea3b74adf8413a2ef58.e34RahmKa3mRay0Lc3aKbhiLbxaKe6fznA5Pp7ftolbGmkTy?Menu=customer&'amp;actionCmd=seminarDetails
Regards
Prem

How can I stop Firefox 4 from displaying "The document cannot change while Printing or in Print Preview" from appearing every time I click on File/Page Preview?

Clicking on File/Page Preview in Firefox 4 brings up a warning dialog "The document cannot change while Printing or in Print Preview" every time. How can I stop this from happening? It is very annoying, and it is necessary to click "OK" on this dialog twice before it will go away. Thank you.

Does it behave that way in [[Safe Mode]] ?
If it doesn't, then one of your add-ons in the culprit.

Scheduled CR not changing parameter value in Infoview or CMC

Hello:
I have a crystal reports build with CR 2008 SP2, FP 2.3;
that is based on BEx Query with 3 sap bw variables.
When refreshing the report in CR Designer, I can change the parameter value and get the right results.
When in Infoview or CMC I can run the report on demand via crystal viewer in infoview, and change the parameter and get the right results.
When I SCHEDULE tthe crystal report either in Infoview or CMC, the values in the parameter field is NOT Changing....NOT UPDATING.
SO the report runs with the default values, and not the ones I selected.
CR paramaters are not getting passed to BEX variables.
Have you seen this before?
Backend = XI 3.1 SP2, FP 2.3
HPUX-iA64
BOBJTomcat
Data Source = SAP BW 7.0
CR = 2008 SP2 FP 2.3
Client tools = XI 3.1 SP2 FP 2.3
Let me know if you have seen this error before.
Thanks,
Dwayne Thomas

Tested this after applying BOE XI 3.1 SP3 and SAP IK SP3.
Fixed

Hi, i have a problem with my credit card so want to use a card from another country but cannot change my country settings

hi, i have a problem with my credit card so want to use a card froma different country but cannot change my country settings

Hi balalbas,
If you are having issues changing the country associated with your iTunes Store account, you may find the following article helpful:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Regards,
- Brenden

After creating a form from an existing document, viewing it in Adobe Reader for Android only shows the form fields, and not the document behind it.

Using an existing PDF file to create an editable form that I can update on my tablet as I go, but when I open the file on my tablet (using Adobe Reader for Android), it only shows the blue editable fields that I've created, but not the actual form that's supposed to be behind it. However, it views properly on my PC. Am I not saving it out correctly?

Please share the sample file with me. I am sending you instruction via private message.
Regards,
Anoop

Ssrs 2012 change parameter values

In an existing SSRS 2012 report, I have a requirement for a user to be able to select by multiple school(s) and/or multiple grade(s). This is fine except certain schools like elementary have grade levels of KG to 06, Middle school has grades of 06 to 09
and high school has grades of 10 to 12. Thus for example, if a user has initially selected grades 11 and 12 and then they select an elementary school that has grades KG through 06, the 'grade level' selection would need to change.
In other words, I am thinking of initially having the available and default values for the parameter called 'Grade' set to KG through 12. However if a school is selected that only has specific grade levels like elementary school, how can I override
the original grade level and only allow the user to select grades that the particular school contains?

Hi Wendy,
Per my understanding that you have two multiple value parameters "School" and "Grade", you have specify the available values and default values for these two parameters, now you want to value which displayed in the
dropdown list of Grade depende on the selection in the School parameter, right?
I have tested on my local environment and you can create cascading parameter for Grade, for example, when you select "Elementary" in the School the grade dropdown list will display "1,2,3,4,5", when you select the "Middle",
the grade will display "6,7,8,9", when you select the "High", the grade will display "10,11,12".
If this is case, please reference to the details information below to achieve this:
1. Create an new dataset2 and use the query below to get the values from this query for the parameter School:
select distinct a.School from
(SELECT 'Elementary' AS School, 1 AS grade
UNION
SELECT 'Elementary' AS School, 2 AS grade
UNION
SELECT 'Elementary' AS School, 3 AS grade
UNION
SELECT 'Elementary' AS School, 4 AS grade
UNION
SELECT 'Elementary' AS School, 5 AS grade
UNION
SELECT 'Middle' AS School, 6 AS grade
UNION
SELECT 'Middle' AS School, 7 AS grade
UNION
SELECT 'Middle' AS School, 8 AS grade
UNION
SELECT 'Middle' AS School, 9 AS grade
UNION
SELECT 'High' AS School, 10 AS grade
UNION
SELECT 'High' AS School, 11 AS grade
UNION
SELECT 'High' AS School, 12 AS grade)a
2. Create the dataset3 and use below query to get the values from this query for the parameter grade:
SELECT a.grade
FROM (
SELECT 'Elementary' AS school, 1 AS grade
UNION
SELECT 'Elementary' AS school, 2 AS grade
UNION
SELECT 'Elementary' AS school, 3 AS grade
UNION
SELECT 'Elementary' AS school, 4 AS grade
UNION
SELECT 'Elementary' AS school, 5 AS grade
UNION
SELECT 'Middle' AS school, 6 AS grade
UNION
SELECT 'Middle' AS school, 7 AS grade
UNION
SELECT 'Middle' AS school, 8 AS grade
UNION
SELECT 'Middle' AS school, 9 AS grade
UNION
SELECT 'High' AS school, 10 AS grade
UNION
SELECT 'High' AS school, 11 AS grade
UNION
SELECT 'High' AS school, 12 AS grade) AS a
where a.school in (@School)
3. Create two parameters "School" and "Grade" check the "Allow Multiple Values" and also set the "Availble values" and "Default values" by select the "Get values from a query" as below:
4. Preview as below:
More details information about add Cascading Parameters to a Report:
Add Cascading Parameters to a Report (Report Builder and SSRS)
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Unable to read data from an excel document of 365*24 values ( all rounded to 4 decimal points)

I have an excel sheet containing data of hourly loads in MW( rounded to 4 decimals) of one year. So, I have 365*24 values that I want to import to Labview using Read from spreadsheet.vi. However what i get in the output array is 0's and randomly some unit values at very few places. I have checked the array size of the output array and it shows different array sizes for different yearly data.
I am attaching the four excel spreadsheets .
Plz help me with the issue I am facing.
Attachments:
Load-2012.xlsx ‏95 KB
Load-2013.xlsx ‏94 KB
Load-2014.xlsx ‏59 KB

If you are using LabVIEW 2014, it includes the Report Generation Toolkit (which is also available as an add-on in earlier LabVIEW Versions). This can read native Excel files, including .xlsx. With a few functions (3 or 4, I think), you should be able to get the entire Table into a 2D array.
Bob Schor

Page is refreshing when changing parameter in sharepoint 2010 report viewer

Hi All,
I have uploaded a rdl file to sharepoint 2010 docuement library. When I click on this rdl file, it opens the report in a reportviewer.
I have 4 parameters year, month, country, location(its is dependent on country selection).
Now the issue is if I change year, month, and country it is refreshing entire page and displaying the following error message, but if I change location then no refresh is happening.
"Report parameter values must be specified before the report can be displayed. Choose parameter values in the parameters area and click the Apply button""
Any idea why it is refreshing the entire page when changing parameter value.
Thanks !
Soumya Das

Hi Soumya,
According to your description, my understanding is that you got an error when you used Report View.
Whether you used cascading parameter in the report. It seems to be by design if you used cascading parameter in the report.
As I am not an expert for reporting, I suggest you create a new thread on SSRS forum, more experts will assist you with this issue.
SSRS forum:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Or, you can open a ticket for this issue to confirm this issue.
Here are two similar threads, you can use as a reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0979b6c1-b110-4ab9-9685-8382c8efbe3b/report-parameter-values-must-be-specified-before-the-report-can-be-displayed-choose-parameter?forum=sqlreportingserviceshttps://social.msdn.microsoft.com/Forums/sqlserver/en-US/0979b6c1-b110-4ab9-9685-8382c8efbe3b/report-parameter-values-must-be-specified-before-the-report-can-be-displayed-choose-parameter?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/c161fab2-e573-41e5-bba6-dde4122a798f/report-refreshes-when-it-shouldnt?forum=sqlreportingservices
Best Regards
Lisa Chen

Error printing Check - "Missing Parameter Values. Error During Printing"

Dear friends,
Our client is in SAP B1 8.81 Pl07 and is facing an error while printing checks designed in Crystal Reports. As soon as they click on "Print" button, we are getting an error "Missing Parameter Values. Error During Printing".
We have checked the Crystal Reports and all the parameters are given.
Can anyone help me regarding this?
Thanks and regards,
Bharath S

hi,
Quoted from Note 1555170
1555170 - Error 'Missing parameter values' printing with CR layout
Symptom
When you print on add any stock transactions document, with Crystal report layout, you receive error message:'Missing parameter values' and then 'Error during the printing; ensure all parameters are defined'
Step by Step scenario:
1.Go to Administration / System Initialization / Print preferences and select the tab per document.
2.Select the document stock transfer and tick the box print document when adding document and click on update.
3.Go to stock management / stock transactions / stock transfer
set the Crystal report template as default.
Note:
- The issue is reproduced also for Goods Receipt and Good Issue.
- The issue is reporduced with any Crystal Report Template for the     above documents.
Cause
Program error
Solution
This issue is candidate for a change in a future release of SAP Business One.
Workarounds:
1.Use PLD for printing the stock transactions.
2.Convert the PLD layout to Crystal reports with Crystal converter.
3.Print the document after adding it.
Other terms
sap business one, printing issues, good issue, good receipt, stock transfer, crystal report, print preferences, print when adding, dockey, missing parameter
Header Data
Released on     07.02.2011 13:27:30
Release status     Released for Customer
Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
Other Components
SBO-GEN-PRT Printing Issues
Priority     Correction with low priority
Category     Program error
Validity
Software Component
Version
SAP BUSINESS ONE
8.8
8.81
you can download the PLD to Crystal Converter [here|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/108305a7-1555-2d10-8289-9a178d441c71]
regards,
Fidel

ReportDocument.Export() raises "Missing Parameter Values" exception

Hi
Recently I encountered a question about SAP Crystal Report that I have a rpt file with several sub reports and I am required to make the data source to be XML with http/https URLs. I created different .NET pages which returns XML stream as data source for both main report and sub reports in my rpt file, and also created a sub report links which pass dynamic parameters from main report to the sub reports, everything worked fine when I entered the necessary parameters only for the main report in the design tool, both the main report and sub reports displayed perfectly.
But it did not work in my .NET application which export the reports to PDFs, I referenced “CrystalDecisions.CrystalReports.Engine” and some other necessary DLLs into my project, and then I created an instance of ReportDocument, loaded the rpt file, set parameters which used in the main report, set connection info, and at last when I export the report it throw out an exception with “Missing Parameter Values” error message, even though I removed the sub report links which pass parameters from main report, the exception still occurred, but when I removed all the sub reports, and only export the main report it worked!!
Here is a result of my attempts:
Main Report
Sub Report
Result
1
With XML data source
No report
Works fine with dynamic parameters set to the http/https url which returns an xml results
2
With XML data source
Pass a static value and print it on the report
Works fine.
3
With XML data source
Create a SQL command WITHOUT any parameters passed from main report
Works fine
4
With XML data source
Create a SQL command WITH a dynamic parameter passed from main report
Works fine
5
With XML data source
Create a xml data source WITHOUT any parameters passed from main report
Failed with "Missing Parameter Values"
6
With XML data source
Create a xml data source WITH a dynamic parameter passed from main report
Failed with "Missing Parameter Values"
I am confused about this issue for a few days, is there any ideas or helps? many thanks!

OK:
We upgraded to CR 13.0.2000.0 and Visual Studio 2012 and .Net Framework 4.5.
Problem still happens.
When we display the report in the designer, the url has parameters. Here are the IIS log entries:
2014-05-01 18:24:56 192.168.251.10 GET /quotit/apps/leadspro/CrystalServiceGateway_test.aspx @IFPPSID=1899582751211388&@styleColorScheme=10511658/13343077/10511658/13343077/16777215/15720656/16777215/15720656/24831/13426687|10511658/16777215/16777215/16777215/0/0/0/0/0/0 80 - 10.16.26.44 Java/1.6.0_37 200 0 0 959
2014-05-01 18:24:56 192.168.251.10 GET /quotit/apps/leadspro/CrystalServiceGateway_test2.aspx @BrokerID=23433176 80 - 10.16.26.44 Java/1.6.0_37 200 0 0 742
When we use the crystaldecisions.crystalreports.engine, no parameters are passed. Here are the IIS log entries:
2014-05-01 18:22:28 192.168.251.10 GET /quotit/apps/leadspro/CrystalServiceGateway_test2.aspx - 80 - 10.16.26.44 Java/1.7.0_45 200 0 0 58
2014-05-01 18:22:28 192.168.251.10 GET /quotit/apps/leadspro/CrystalServiceGateway_test.aspx - 80 - 10.16.26.44 Java/1.7.0_45 200 0 0 115
I cannot attach the rpt file here. If you need it, please let me know how to get it to you. I am attaching a screenshot of the datasource location. I am pasting in the striped down .NET code. Any help or pointers would be greatly appreciated.
Thanks,
Tom
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Configuration;
using System.IO;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using System.Collections;
namespace CrystalTest
    class Program
        static void Main(string[] args)
            string source = Path.Combine(@"C:\Users\thomas\Desktop\reports\eProIFP\iProReports", "summaryReportByPremium_ACA_UltraColor.rpt");
            string destination = Path.Combine(@"C:\Users\thomas\Desktop\testReports", "output.pdf");
            if (File.Exists(destination))
                File.Delete(destination);
            ReportDocument rptDoc = new ReportDocument();
            if (File.Exists(source))
                rptDoc.Load(source);
                rptDoc.SetParameterValue("@IFPPSID", "1899582751211388");
                rptDoc.SetParameterValue("@styleColorScheme", "10511658/13343077/10511658/13343077/16777215/15720656/16777215/15720656/24831/13426687|10511658/16777215/16777215/16777215/0/0/0/0/0/0");
                rptDoc.SetParameterValue("@testID", "1");
                CrystalDecisions.Shared.TableLogOnInfo logOnInfo = new CrystalDecisions.Shared.TableLogOnInfo();
                foreach (CrystalDecisions.CrystalReports.Engine.Table objTable in rptDoc.Database.Tables)
                    logOnInfo.ConnectionInfo.IntegratedSecurity = true;
                    objTable.ApplyLogOnInfo(logOnInfo);
                ExportOptions CrExportOptions = new ExportOptions();
                DiskFileDestinationOptions crDiskFileDestinationOptions = new DiskFileDestinationOptions();
                crDiskFileDestinationOptions.DiskFileName = destination;
                CrExportOptions = rptDoc.ExportOptions;
                CrExportOptions.DestinationOptions = crDiskFileDestinationOptions;
                CrExportOptions.ExportDestinationType = ExportDestinationType.DiskFile;
                CrExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat;
                rptDoc.Export();

WhileCopying from an existing document to change parameter value settings

Similar Messages

Maybe you are looking for