Who granted select on a table and when?

Hi all,
We are running Oracle 10g. There are some discrepancies with a table between our production versus development environments. The table on development has additional grants and also has a synonym. My boss wants to know who had granted access to this table and when? I am not a DBA. I asked our DBA and he said he didn't think Oracle keeps track of that type of information. Is it possible to track these types of changes? For example who created synonym for this table and when? One more thing to add is that audit has not been turned on.
Thank you for your input,
Seyed

Seyed_G wrote:
Hi all,
We are running Oracle 10g. There are some discrepancies with a table between our production versus development environments. The table on development has additional grants and also has a synonym. My boss wants to know who had granted access to this table and when? I am not a DBA. I asked our DBA and he said he didn't think Oracle keeps track of that type of information. Is it possible to track these types of changes? For example who created synonym for this table and when? One more thing to add is that audit has not been turned on.
Thank you for your input,
SeyedPossible only if auditing enabled.

Similar Messages

GRANT SELECT ON ALL TABLES

Is there a direct SQL to grant select on all tables in the schema for a user? Or do we need to write a PLSQL for this?
Also, if a new table T1 is created or existing table T2 is dropped and recreated after granting the select all privilege, will the user have access to T1 and T2?
thanks

Is there a direct SQL to grant select on all tables
in the schema for a user? Or do we need to write a
PLSQL for this?There is no privilege that would give user A access to all the tables in schema B. You would need to grant access to each object, which can certainly be done via dynamic SQL in PL/SQL.
There is a privilege SELECT ANY TABLE which allows the user to query any table in the system, but this is generally very dangerous and probably not something you would want to give a normal user.
Also, if a new table T1 is created or existing table
T2 is dropped and recreated after granting the select
all privilege, will the user have access to T1 and
T2?Unless you grant SELECT ANY TABLE, you would need to explicitly grant A access to any new tables created in schema B (or to tables after they are dropped and re-created). Potentially, you could create a DDL trigger that submitted a job that would, in turn, make the grant whenever a new table was created in schema B.
Justin

Grant select on all table of a schema to role

Hi , is it possible to grant select on all table on a schema to a role?

To grant SELECT on all tables of the current schema to particular role or user:
SELECT 'GRANT SELECT ON '||TABLE_NAME||' TO READ_ONLY_ROLE;' COMMAND
FROM (
SELECT TABLE_NAME
FROM ALL_TABLES
WHERE OWNER = (SELECT USER FROM DUAL)
Then copy and execute the result commands, eg:
GRANT SELECT ON DEPT TO READ_ONLY_ROLE;
GRANT SELECT ON EMP TO READ_ONLY_ROLE;
GRANT SELECT ON DEMO_USERS TO READ_ONLY_ROLE;
GRANT SELECT ON DEMO_CUSTOMERS TO READ_ONLY_ROLE;
GRANT SELECT ON DEMO_ORDERS TO READ_ONLY_ROLE;

Select from two tables and insert into a third

I'm trying to do a select from two tables and do an insert into a third table from the two resulting columns.
I have the following....
DECLARE
tempsid number;
temphostid number;
BEGIN
select "DBSID_ID","ID" into tempsid,temphostid from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" ("SIDLOOKUP_ID", "SERVERLOOKUP_ID")
values(tempsid, temphostsid);
END;
run;
I get the error ....
ORA-06550: line 11, column 18:
PL/SQL: ORA-00984: column not allowed here
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
1. DECLARE
2. tempsid number;
3. temphostid number;

okay ... I tried a different way ...
DECLARE
a number;
b number;
BEGIN
select "DBSID_ID","ID" into a,b from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" (SIDLOOKUP_ID, SERVERLOOKUP_ID) values (a, b);
END;
and now it whines about ...
ORA-01422: exact fetch returns more than requested number of rows

Selection groups for tables and header tables

A couple of questions or rather observations around Selection Groups for tables and conversion objectu2026
1) For tables that do not really have a date field, for instance table PDSNR, it appears that you cannot specify a selection group. Consequently, you have to transfer the table in its entirety. Is this something that can be modified via customizing?
2) And what about the header tables, for example, X_ANLC, I have tried but not able to change the selection groups on these objects.
Thanks!
Harmeet

Hi Harmeet.
Since you mention you can only filter by date I am assuming you are using TDTIM.
How would you want to filter PDSNR, for example? Would it want to filter all entries >= a given sequence number?
The only way I know to do that is to work directly with the configuration tables. In your case you will need to use CNVMBTSEL* tables. Check how the standard selection groups are configured, and it should not be too difficult to follow the same logic and create your own selection groups.
CNVMBTSELGRP                   MBT PCL Selection groups              (main table to create the selection group)
CNVMBTSELMEMTYPE               MBT PCL Selection group member types (main table to define members => fields for the selection group)
CNVMBTSELGRPDEF                MBT PCL Selection group definition    (definition of the fields in that selection group)
CNVMBTSELGRPVAL                MBT PCL Selection group values        (values for each field; you can use GE for >=)
CNVMBTSELCLAUSE                MBT PCL Selection group clause        (should also be straightforward if you are using only one field)
CNVMBTSELVAR                   MBT PCL Selection group variants     (configure the same variant for your selection group as for the others)
CNVMBTSELREF                   MBT PCL Selection group reference     (assignment of selection group to conversion object)
Hope this helps,
Rui Dantas

Select from 2 tables and insert same data into 2 other tables(BPEL Process)

Hi All,
Please suggest me how to select from 2 tables and insert the same data into 2 tables. I am successful in selecting data from 2 tables, but i am not able to insert the same data into 2 other tables. There is foreign key constraint between 2 tables.
Thanks in Advance,
MAH

I have created DB Adapter for selecting from 2 tables and also DB adapter for insert and i have created parent child relationship between 2 tables.
I am getting this error
<Faulthttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>env:Server</faultcode>
<faultstring>com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is 6f3fe20c1b031057:-6cc7dfb5:11b8bf5fbe1:-7fa4. Please check the process instance for detail.</faultstring>
</Fault>

Grant select on all tables of a schema

I need to grant select on all tables (over 200 tables) of a schema to other users. Are there any SQL syntax to do this?
Thanks!

Execute the following script, modify it for your environment:
Script
Accept from_owner char prompt 'Grant from user:'
Accept to_user char prompt 'grant to user:'
set head off;
set lines 300;
set pages 0;
set termout off;
set feedback off;
set head off;
set verify off;
spool d:\temp\grant.sql
select 'grant select on &from_owner..'||
table_name||
' to &to_user;'
from dba_tables
where owner=upper('&&from_owner');
spool off;
set head on;
set pages 24;
set termout on;
set feedback on;
set head on;
@d:\temp\grant.sqlExecution example:
system@DBA> @d:\temp\grants.sql
Grant from user:scott
grant to user:ejemplo
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.

I have an apple ipad air and I'm having trouble selecting pictures on Facebook and when I open my music and select a song it plays the song two songs about it in the list

I have an apple ipad air and I'm having trouble selecting pictures on Facebook and when I open my music and select a song it plays the song two songs about it in the list

Two songs above it In the list sorry

STARTED IT, BUT STILL NEED HELP -- INPUTTTING CHARACTERS FROM LOADED FILE INTO TABLE, SELECTING STRINGS FROM TABLE AND PLACING IN NEW TABLE, SAVING NEW TABLE TO SPREADSHEET FILE

I AM TRYING TO IMPORT CHARACTERS FROM A TAB DELIMITED FILE INTO A TABLE ON LABVIEW. ONCE THE DATA IS IN THE TABLE I WANT TO BE ABLE TO SELECT INDIVIDUAL STRINGS FROM THE TABLE AND PLACE IT IN A NEW TABLE. WHEN I CLICK ON A STRING I WOULD LIKE THE SELECTED STRING TO SHOW IN A TEXT BOX LABELED 'SELECTED STEP' AFTER ALL THE SELECTED STRINGS IS IN THE TABLE I WOULD LIKE TO SAVE THE NEW TABLE AS ANOTHER SPREADSHEET -- TAB DELIMITED -- FILE, MAKING IT ACCESSIBLE TO OPEN. HERE IS WHAT I HAVE SO FAR. I CAN INPUT DATA INTO THE TABLE, BUT I CAN ONLY TRANSFER ONE STRING INTO THE TABLE I WOULD LIKE TO BE TO INPUT MULTIPLE STRINGS. ALSO WHENEVER I TRY SAVING THE FILE, IT ALWAYS SAVES A UNKNOWN FILE, HOW CAN I GET IT TO SAVE AS A SPREADSHEET FILE. THANKING ALL OF YOU IN ADVANCE FOR YOUR HELP!!!!!!
Attachments:
Selector.zip ‏30 KB

Pondered,
The question you are asking is the same one that you asked in: http://forums.ni.com/ni/board/message?board.id=170&message.id=132508#M132508, to which I supplied a revised version of the original vi you used (which was modified from the original one I supplied to an earlier thread). A couple of questions: 1) What does my latest not do that is in your question, 2) Why are you starting yet another thread about the same problem? We are here trying to help, it makes it a lot easier if you keep the same problem in the same thread, it reduces duplication of effort from those that might not have been following the previous thread(s). Those of us that don't have our "names in blue" are just doing this "for fun" (the blue names are NI employees, who may still be doing it "for fun"), and it makes it more fun if it doesn't seem (correctly or not) that our attempts are ignored. If an answer doesn't help, or seems incomplete, post a little more detail to the same thread so that the original respondent, or someone new, can provide more information, or understand your problem better.
P.M.
Message Edited by LV_Pro on 07-20-2005 01:20 PM
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Selecting from two tables and confirming from them despites they not relate

Please I need a query to select from two tables that are not related to each other.
I also want to confirm data's as in verify wether what the user has entered is in accordance with what is in the tables
Examples
the first table is named "Card" and the second table is named "Student_Details"
Card table contains a column named "Pin_Number".
The Student_Details table contains fields such as Exam_Number, Name, Age, Sex.
The user has to Enter the Pin_Number which has to be confirmed in the Card table and Exam_Number which has to be confirmed in the Student_Details table and verify that both data's are correct.
Please I need the SQL and PL/SQL queries for this problem.
Thanks

Hi,
I think you need two different queries
You can write a procedure like:
create or replace procedure p1 (p_pin_number number, p_exam_number)
is
r_card_row            card%rowtype;
r_student_details     student_details%rowtype;
cursor c1 is
select *
    from card
   where pin_number = p_pin_number;
cursor c2 is
select *
    from student_details
   where exam_number = p_exam_number;
begin
open c1;
    loop
      fetch c1 into r_card_row;
      exit when c1%notfound;
      .... do whatever you want..... and the samething you can do with other cursor
    end loop;
close c1;
end p1;Hope this helps
Ghulam

GRANT syntax : Grant SELECT privileges on tables to a User on a Remote DB

Hi
I am having two databases: DEV1 and DEV2. DEV1 is my source database and DEV2 is target database. There is a table in Schema A on Dev1. I have created a PUBLIC DBLINK "TESTDBLINK" in Schema B on DEV2 that connects to Schema A on DEV1.
Database Schema Table Machine
DEV1 A EMP 192.168.210.10
Database Schema Database Lik Machine
DEV2 B TESTDBLINK 192.168.210.11
How to grant SELECT privileges on Schema A Table EMP ( DEV1 ) to Schema B on DEV2 ? What is the syntax ?
e.g. Log in as Schema A on DEV 1
SQL> GRANT SELECT ON EMP TO *???????*
Thanks for your inputs
Harry

You don't have to grant that table in schema A to schema B.
Inside schema B, you can just issue a select statement like this:
select *
from table@db-link-to-AOracle will connect to the remote instance, using the credentials of schema A, and since A owns that table, Oracle can already access the table.

Lookup by SQL select in ODS tables and source package

Hi all
I load FI data in ODS and need some extra info from older ODS records.
In my Update rule for target InfoObject I created 2 SQL selects on Active Data and New data tables of ODS. Selects worked fine while testing them as separate program, but I got no data while data load.
I guess, the data I need was in the same data package during data load. So I assume, besides Active/New data selects, I need to check data on SOURCE_PACKAGE. Is it possible on update rule level of InfoObject? Could you please, provide me some ABAP example?
thanx in advance, points will be awarded.

SELECT in field routine:
==========================================================
      DATA src_doc_no(10) TYPE c.
      DATA src_item_num(3) TYPE c.
      DATA src_year(5) TYPE c.
      DATA src_doc_typ(2) TYPE c.
if ( COMM_STRUCTURE-AC_DOC_TYP = 'DD' or COMM_STRUCTURE-AC_DOC_TYP =
'LD' ) and STRLEN( COMM_STRUCTURE-REF_KEY3 ) = 17.
     CONCATENATE COMM_STRUCTURE-REF_KEY3+0(4) '%' INTO src_year.
     src_item_num = COMM_STRUCTURE-REF_KEY3+15(3).
     src_doc_no = COMM_STRUCTURE-REF_KEY3+4(10).
select from NEW data of ODS:
     SELECT AC_DOC_TYP into src_doc_typ
     FROM /BI0/AFIAR_O0340
     WHERE COMP_CODE = COMM_STRUCTURE-COMP_CODE
       AND DEBITOR = COMM_STRUCTURE-DEBITOR
       AND FISCVARNT = COMM_STRUCTURE-FISCVARNT
       AND AC_DOC_NO = src_doc_no
       AND ITEM_NUM = src_item_num
       AND FISCPER like src_year.
     endselect.
     if src_doc_typ = ''.
select from ACTIVE data of ODS:
       SELECT AC_DOC_TYP into src_doc_typ
       FROM /BI0/AFIAR_O0300
       WHERE COMP_CODE = COMM_STRUCTURE-COMP_CODE
         AND DEBITOR = COMM_STRUCTURE-DEBITOR
         AND FISCVARNT = COMM_STRUCTURE-FISCVARNT
         AND AC_DOC_NO = src_doc_no
         AND ITEM_NUM = src_item_num
         AND FISCPER like src_year.
       endselect.
     endif.
     RESULT = src_doc_typ.
endif.
============================================

Error when click on any table and when click on sql its show errors....

Dear i am using updated SQL Developer 1.5
Errors when i click on the tables under my user, then on the window there is cloumn,data,constraints, ets i click on every tab no error when i click on the sql tab i found these errors on every user table and on every single tables kindly check this out.
and its also show me the results but on logging window its shows these errors.
Sequence - 144, Elapsed - 0, source- oracle.dbtools.raptor.utils.Connections$ConnectionKey
messgae = null
Sequence - 146, Elapsed - 553672, source-oracle.dbtools.db.DBUtil
message =
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3918
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4066
ORA-06512: at "SYS.DBMS_METADATA", line 831
ORA-06512: at line 1
Sequence - 147, Elapsed - 78, source- oracle.dbtools.db.DBUtil
messgae =
ORA-00904: invalid column name
Regards,
Kamran J. Chaudhry
Pakistan.

Dear 1st of all thansk for given me reply,
Actually i am using oracle 9.02 and i just checking that its connect or not but its successfully connected and also showing me the results.
so you tell me is this a fine work or just conencted and show the results and others commands or its what...
thanks for your nice cooperation
Kamran J. Chaudhry
Pakistan.

Dump selective with multi tables and multi querys

Hi all,
I need generate dump from selective query.
Example
TableA
TableB
TableC
I need export TableA and TableB. TableA only record with 'fieldA' > 0 and TableB only record with 'fieldB' < 0. Is it possible?
I try exp command but I have problem with query parameter.
Exp USER/[email protected]:1521/myschema
file="mydump.dmp"
log="myLog.log"
tables=TableA,TableB
query=TableA:\"WHERE fieldA > 0\" TableB:\"WHERE fieldB > 0\"
Can you help me, please?
Thanks
Luca

Hi,
i think in normal exp you can not use multiple Query, you have to do it one by one
i.e
exp scott/tiger file=exp_tabel.dmp log=exp_tabel.log tables=emp query=\"WHERE sal \>4000\" statistics=nonewhile you can do it by using the expdp something like this
expdp scott/tiger directory=DATA_DD_DIR dumpfile=exp_tabel.dmp logfile=exp_tabel.log tables=emp,dept query=emp:\"WHERE sal > 4000\", dept:\"where deptno > 20\"What version of db you are using? better to use datapump
HTH

Selecting from one table and Update another in the same Page

Could someone help me with this HTMLDB task. In my page design, I am selecting data from two tables (masters: DEPT, EMP) which I want to display on the left column of the page and at the same time a user would be able to update another table (ATTENDANCE:with many children) which would have a radiogroup on the right side for each value of the master such as employee name. The placement of data has to appear in corresponding rows on the page. For instance, employee names of the master table must appear on the same row with its corresponding child value. The page would be grouped by DEPT_NO. The user would click on the department name, a new page with the employee name would apprar. From that page, the user would then update attendance column for each employee in that department. In this operation, it is only the ATTENDANCE table that is being updated. I can send out more information about the structure of the tables if you need more information. I tried many HTMLDB options, forms, reports, etc. I have not been able to get quite right. Your help will be appreciated.

Raju,
Thanks for responding to my problem. I have actually tried using the example on how-to you sent me a link to but it did not help as I expected. You see, the page would be updated every meeting date for each employee. I can send you more information about the table structure if you like. However, let me see if this will help you a bit.
Tables are: 1) Dept [dept_no (pk),dept_name] 2) EMP [emp_no (pk),emp_name, dept_no(fk)] 3) Meetings [meet_key(pk),attended, meeting_date, emp_no(fk)]
What I want to do is create two pages, one would list the departments, when a user selects a department, the user would be linked to a meeting attandance page. The meeting attendance page would list department name once, Meeting date once, and then list employees in that department. At the right column of every employee would be a checkbox for meeting.attended for update. The meeting_date would be pre-populated so that what the user would do is just check Yes/NO. The second page is the one I'm having the most problem with.
If I can do a fetch from dept, emp, and meetings and then do an update on the Meetings table on the same page, I think that might solve the problem. That was how I solved it in MS Access three years ago.
Here is email address in case you want to contact me directly. [email protected]
Thanks again for your help.

Who granted select on a table and when?

Similar Messages

Maybe you are looking for