Whole disk encryption with boot camp?

I'm a network administrator and have been dedicated Windows until now. We are just about to receive our first Mac Air 13" in the office and trying to work out we can keep our security policy in tact whilst giving the flexibility of using Windows.
Pretty sure we want to do boot camp so the user can decide which OS they want to go into and not have any performance issues.
Do you know of any products that will encrypt the entire hard disk this without giving booting issues?
Alternatively, if these products break booting they would have to log in to the Mac OS and then run a virtual machine (think it's called parrallels). Is there a noticable performance hit on this?
Thanks in advance - this is very new territoty for a long term windows fan boy
Adam

The encryption is dependant on the OS version. To my knowledge there is no way to Encrypt the Whole Drive with any one piece of software and then install both OS X and Windows on that drive. For the encryption to work it has to work with the OS installed. So you have OS X and then use Boot Camp to install Windows. Then use FileVault in OS X and whatever encryption system you want for the Windows partition/install.
I could be complete mistaken.

Similar Messages

PGP Whole Disk Encryption

After my wife's iphone was stolen I was thinking of installing PGP whole disk encryption on my Macbook pro. PGP does not support Boot camp. Is there a way for me to take my install of Windows XP and transfer that to parrells? In other words take the entire partition and copy it into the Virtual Machine on Parrells or Fusion? Also how should I copy the windows partion, if I was going to do this sort of thing on the mac I'd use super super or carbon copy cloner to copy the entire disk over to another disk.
thanks,
jeff

jevenson:
I need to understand this post clearly. Just so you and I are on the same page, I am going to make some assumptions. You plan to install PGP Whole Disk Encryption on your OSx side. I suspect that you want it to cover your boot camp partition upon which Windows XP resides.
PGP does not support Boot camp.
I am assuming that by this you meant that should you install PGP on the OSx side then it would not cover the Windows side on a boot camp setup.
Is there a way for me to take my install of Windows XP and transfer that to parrells? In other words take the entire partition and copy it into the Virtual Machine on Parrells or Fusion?
No, at present, I do not know of any way to actually move Windows from a boot camp partition to reside on the OSx partition and run as a virtual machine under parallels or fusion without performing a complete installation under parallels/fusion.
Now, having said that, there is another option for you. Parallels and Fusion both can use the boot camp partition with Windows as a virtual machine BUT without moving windows on the OSx partition. It will run WIndows as a virtual machine directly from the BC partition. So, you will be able to run OSx and Windows at the same time. What I am not sure is that if you have PGP installed on the OSx side and since parallels/fusion runs from the OSx side then will it encrypt the boot camp/windows when run under it?
Axel F.

No success with Boot Camp

I have been using VirtualBox with the original release of Windows 7. I thought that I would try out the Release candidate and install it with Boot Camp. I have an internal drive to dedicate to this. So here's what happens.
I have downloaded the Windows os file and burnt it to a DVD using Drive Utility at its lowest burn speed. I am pretty sure that this disk is ok as the windows installer starts up fine.
I created a windows partition on an empty internal drive which shows up on Drive Utility as an NTFS drive. I fire up the Boot Camp app and it asks me to insert the install disk for Windows. The installer starts up and I select the disk, making sure to select the correct one, then select the option to format it. The blue donut whirls around for a few seconds and then I get the following dialogue: "Windows cannot be installed on this drive because of error 0x80300024." I may not have the wording correct but the error code is right.
What does it mean? Can anyone give me a clue where to go from here. Thanks in anticipation.

Still no go!!!
I thought that the DVD I burnt might be faulty, so I tried using the known good one that I used with VirtualBox.
Same result, different error. I got as far as the same screen on the Windows installer. I clicked on the "Format" button, the little blue donut whizzed around for a few seconds again. No dialogue showed up and I thought, success. But when I clicked on the "Next" button, this text appeared with a yellow triangle to the left: "Setup was unable to create a new system partition or locate an existing system partition. See setup log for details."
How can I see the setup log? Other than the DVD, the only other difference between the two attempts was the drive. With this second try, I chose to format the whole drive with Boot Camp, rather than split the drive between Mac & Windows.

PGP Whole disk Encryption but for Windows Partition only ?

Hi,
Slightly unusual situation here. I want to use my MacBook Pro at work and home. OSX at home and XP at work. Now at work they have a strict policy of only allowing computers on the network with PGP Whole disk Encryption. I've looked into this and there doesn't appear to be a way of setting this up via bootcamp because PGP makes use of MBR which as far as I know bootcamp doesn't use and PGP themselves say bootcamp isn't supported.
Looking around the web there are various articles about tripple/quad booting Mac systems not using bootcamp but things such as Grub or reFIT. I'm wondering if there is a way of using this boot technique but using the partition option when installing PGP for windows and only setting it up on the defined windows partition.
Has anybody tried this or have alternatives ?
Thanks in advance
Steve

Hi Steve:
Windows has a boot manager built in. Windows can be installed on a logical NTFS partition, the boot
manager can sit on a tiny fat or fat32 primary partition. I have used this arrangement on my PC's
many times. I have not tried it on a Mac, but it should work. You will need to have some working
knowledge of partitioning to pull it off.
I don't know how PGP designed their software, but it should support this arrangement, unless they
have some cheesy engineering design built into their software that would prevent it from working.
The windows boot manager has been with NT from the beginning. It is not rocket science, NTLDR
sits in the usual spot reserved for system boot files, the boot ini file tells NTLDR what partition
the /windows/system32/ntoskrnl.exe is on and NTLDR passes the ball to ntoskrnl and away
she goes if everything is Kosher. Windows boot manager can boot other OS's as well.
Be aware though that windows may assign a drive letter to the windows installation other than
"c" (usually "d" of "f". That doesn't keep anything from working though.
Kj

PGP whole disk encryption and Snow Leopard

I've got Leopard with PGP whole disk encryption on it but am having difficulties in installing SL as it want to wipe the HD.

Hi Thomas
Sorry I was trying to save this as a post rather than a question but it hasn't seemed to save my edited message for some reason.
PGP for me is better in that it encrypts the whole disk rather than just the user account. Using FileValut is really unfriendly with TimeMachine, it slows the computer down and for a lot of people you can't actually activate it if you don't have enough space remaining on your HD.
PGP will encrypt your whole disk without slowing it down or taking up any additional space. It also works better than a firmware password that can be bypassed by resetting the PRAM.
The problem with PGP is that in trying to install Snow Leopard the installer doesn't recognise the boot partition even once the encryption has been removed. This causes it to prompt the user to wipe the HD. Here's the solution I found after some pain I might add:
Remove all the encryption from your HD and Time Machine.
Back up!
Start the Terminal from the Leopard Installer (Utilities->Terminal). This has to be done from the installation disk.
Type diskutil list
Identify your system disk. In most cases it is disk0s2
There's a volume called "Boot OSX" on the next partition, probably disk0s3. If your system is different than disk0, then use that identifier in place of disk0 for the rest of these instructions.
Type diskutil unmountdisk disk0
Type gpt remove -i n disk0 where the n is the last number of the boot partition; for example, disk0s3 would be 3; you would type gpt remove -i 3 disk0
Exit Terminal
P.S. if you accidentally remove the wrong partition OSX wont start up but don't worry, run disk utility from the installation disk and create a new partition and restart. All your data will still be there!

Windows 7 professional 64 Bit on MacBook Pro Retina 15 with Boot Camp ?

Hallo guys, i have a big problem with installing Windows 7 professional 64 Bit on my MacBook Pro Retina 15 with Boot Camp. No matter what i try i get a black screen after partitioning or get a message like " No bootable disk" or " No System Disk availabe".
My Mac has : OS X version 10.8.2, 16 GB RAM, 512 GB memory, 2.6 GHz Intel i7 and is only a week old
My Boot Camp is version 5.0.1
My Windows InstallingDVD is one year old now, i needed it to build a PC last year, hope that doesnt make a difference, its a full version, so not just for upgrading.
From what i saw in the apple support it should work on my macbook. I hope someone can help me.
Thanks in advance.

Ok, problem solved. I looked a bit more here in the questions and there was the answer and its quite simple.
Somehow an USB-stick makes problems while Windows wants to install, i dont know why. So i just made everything over DVDs and now everything works fine.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

A Potential Convert Looking for Some Help with Boot Camp

I posted this in the Macbook Pro forums, and somebody directed me here. Hopefully you can help me with my questions.
Hello,
I have been a PC user ever since I can remember. I have loved the operating system and have had a Dell Laptop for 4 years now without any problems at all. I have no qualms with the Windows Operating Systems. But, it is time for me to get a new laptop, as I will soon be heading off to college. I was thinking about getting another PC, as they are significantly cheaper than the lower-end MBP that I would get, but I was also thinking about trying out a Mac. I plan on using this laptop for most of my undergraduate education though, so I don't want to buy something and find out it isn't what I want or I can't use it. So, if you would help me, I would like to ask some questions about the lower-end Macbook Pro, and I may just end up getting one.
First things first, I am going to be going into engineering, likely mechanical or systems, at either WPI, Northeastern, or Tufts. Ah the experience of choosing colleged. I know Tufts uses AutoCAD, WPI uses SolidWorks, but I am not sure which Northeastern uses. Either way, I most certainly will be using a CAD program. I know that most CAD programs do not work on Macs, so I will likely be using Boot Camp. I have though seen on these boards that the AutoCAD licensing does not work with Boot Camp, or that some users have faced major problems with it. If this is so, then it is highly likely that I will be unable to get a Mac as that program is going to be an absolute necessity. Even if this is just a small percentage of the population, I do not want to find mine being of major issue. For those of you who have gotten it to work, how difficult was the installation, and have you had any issues with AutoCAD or the like? With this in mind, would you even suggest that I get a MBP?
Another Boot Camp question. I have read many posts on these boards discussing different partitioning options, yet I still am unsure what they all mean. I expect to use the Windows side for more than just AutoCAD. I likely will install some games on it for when I am bored, and Microsoft Office, as I do not wish to spend the extra money buying Office for Mac and I need to have the versatility of Excel that I have heard is not found in the Mac version. What is the difference between these two partitioning types, which would you recommend, and how much storage should I partition if I get a 200GB hard drive?
Yet another Boot Camp question, sorry for so many of these. My friend who has a Mac lauds it for its security, nobody makes viruses for Macs. As I will most definitively be using Windows in Boot Camp, would this compromise this security? I know it will be Windows, but I still imagine that it would be encoded somewhat differently then normal, but I could be wrong. Also, if it is possible for the Windows portion to get a virus, could that affect the Mac portion?
Also, I don't use an iPod. I suppose I always thought they were overpriced for what they do. Instead I use an Iriver Clix 2, and I love it. The only thing is, I use Windows Media Player to sync it with my library. I know many have qualms with WMP, but I personally favor it more than iTunes, but that is just me. I do not believe that you can download it for a Mac. If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Finally, is the battery life any different when using Windows than when using Leopard? I will likely be using the Windows portion in the class room.
Sorry for the long-winded post, but I am certainly hoping that I can get some solid answers to make an educated decision before getting my next laptop. I would like to thank you very much for any help that you are able to give me. I do hope you can help me quickly. Thank you.
Message was edited by: Pyrojoe

I can't answer all your questions, especially not anything having to do with CAD.
I still imagine that [Windows] would be encoded somewhat differently then normal,
No. Windows is Windows. You will need a good Windows antivirus, firewall and antispyware program. It is unlikely that a Windows virus will infect the Mac partition because, ordinarily, Windows doesn't know how to do anything with the HFS+ formatted Mac partition. However, the existence of products like MacDrive means that it is possible to teach Windows how to write to the Mac partition, so I see no reason why a virus could not be programmed to.
If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Yes. Probably/yes.
Finally, is the battery life any different when using Windows than when using Leopard?
Yes. Windows does not have the battery management that Leopard has. The battery runs down much quicker in Windows.
You didn't ask, but depending on what kind of engineering you want to study, you may be interested in, or even need to, use some flavour of Unix/Linux. On the one hand, you could always create a partition on a PC--or wipe Windows--and install Linux on the PC. That could even be a good learning experience. On the other hand, Mac OS is Unix, but preinstalled. So with a Mac, you would already have a platform for writing shell scripts, you would have Perl and Python built-in, you would have an IDE (XCode Tools) for C/C++/Objective C/Java as well as gcc and make tools already on the disks which come with the computer, and so on.
Message was edited by: Mr.Lobotomy

Leopard 10.6.8 with Boot Camp 3.0.4 do not support Windows XP SP2???

Hello!
I have my MacBook Pro with Leopard 10.6.8 with Boot Camp 3 on it.Reading a BOOT CAM article I could see that it supports Windows XP SP2.I just installed Windows XP SP2...and when I am trying to use the drivers from MAC DVD it says that BOOT CAMP needs Windows 7.Why I can not use XP?Or where I can get the proper drivers?I have downloaded Boot Camp Drivers XP update pack 2.1 and tried touse it in that XP but just double clicking on it doesn't happen anything:(
Please Help.

Your saying BC 3.4 is on the Mac installer disk? I picked mine up in august 2011 and it only has 3.1 on it if I remember right. How did you check it?
As of today my BC Assistant says 3.4 but the Control panel in Windows only says 3.3, I figure it an't broke I'm not worried about it.
When you insert the disk, it asks you what to do, Run or Open, select Open.
Make a new folder on the desktop in XP, drag ALL the files over to it.
Right click on the setup.exe and select one of the options:
1)-Troubleshoot Compatibility, do what it suggests,
2)-Select Properties / Compatibility / click Run this program in Compatibility mode: then select XP sp2 and work your way up.
If anything pops up about permissions then right click on it again and select Run as Administrator.
If it still won't work then open the Boot Camp folder / Drivers folder / and install each one manually.

Trying to install vista 64 on a separate internal drive with boot camp

running into a wall here,
I'm able to install vista x64 when I divide an internal OS X drive that works fine, but I want to load Vista on it's own entire internal disk (bay 4). Bays 1,2, and 3 I use for OS X they are all 1TB drives. When I go through the boot camp assistant and divide a disk 50/50 between OSX and Windows and then boot to the vista install disk, the vista setup screen shows a PARTITION as "disk x partition x BOOT CAMP" and it works to select that partition, format and load windows... No problem. However when you choose the option in Boot Camp to erase an entire extra disk (in my case bay 4) and create a single partition for Windows and then boot to the Vista install disk the disk that was erased of the mac formatting, it doesn't show up with "BOOT CAMP" in the name inside the Vista setup screen, nor will it let you install vista to it, even if you pick the right one and format it inside Vista setup.
I've tried removing all internal disks except the one I want to load vista on and booting directly to the vista set up disc, and formatting with windows command line diskpart inside setup too, unsuccessfully. It simply keeps giving me messages that windows cannot be installed on the volume... I changed it from a GPU type disc using the "clean" command in diskpart but it still won't work! Man!!!
How can I get vista loaded on a separate disk on my mac, boot camp or not? It seems silly that a disk must have an OS X partiton on it before windows will load on it... Is there a way to load Vista x64 on it's own dedicated internal disk? Gratitude for any real help, I'm positive I'm not the first guy to want to load vista on it's own disk LOL!

So I figured this out myself, there was some kind of glitch in boot camp, i bypassed it and formatted the disk with the os x disk utility as a fat 32. pulled all the other drives out, and booted to vista setup. it formatted the disk to NTFS and lets me install vista 64 yahhhooooooooooooo!!!!!

Install Windows 8.1 with Boot Camp

Greetings you all,
I've been trying to install WIndows 8(.1) on my MacBook Pro early 2011, but without any success. I downloaded the .ISO of Windows, stored it on my external HDD, downloaded the software via Boot Camp to host Windows (I'm sorry I'm french so I'll have to translate everything) and put it on another external HDD, and when I plug them to my Mac and start the installation of Windows, it doesn't detect the USB.
What should I do? If possible, avoiding any installation of the disk image on a DVD.
Thanks.

Hello Mickaelpopo,
Thank you for the question. It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro. Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
Which versions of Windows work with Boot Camp 5?
You can use:
Microsoft Windows 8.0 (64-bit)
Microsoft Windows 8.0 Pro (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
Windows 8.1 is not supported with Boot Camp 5.
You can find more information here:
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Thank you for using Apple Support Communities.
Best,
Sheila M.

Leopard partition will not boot with Boot Camp installed

I am running Leopard 10.5.2 with Boot Camp running Windows XP on about 150 computers in multiple computer labs on my campus. My problem is that a few machines every couple of weeks will stop booting into the Leopard partition. The problematic computers will however boot into Windows every time. Is there an update or something that is causing the Leopard partition to stop booting? I run disk repair and I get "invalid node structure" which causes the repair to fail. My only solution is to partition the drive then re-image the Mac side and Windows side. This unfortunately is not happening to the same computers each time, I fix one computer, then a different has the problem and so on.
Does anyone have an suggestions? By the way, I am running Bombich's BootPicker v. 2.0. Could this be causing the issue?

This helped with a previous Windows issue but when I boot the system while holding "option" key, the Leopard partition does not show up. The Leopard partition shows grey out when I boot from an install DVD and I can not repair permissions or repair disk.

Can I install Windows on my iMac 27, 3TB Fusion Drive, late-2012 with Boot Camp 5?

Hello. When I first opened the Boot Camp Assistant app, it said it could not work with the 3TB fusion drive. With the updated version of Boot Camp, the option to install Windows appeared. I tried to install Windows 8, but the loading bar stopped moving. I waited for hours, but it still did not move. I decided to quit the app, and re-open it, in order to try again. It crashed, and would not open. So I restarted my system and when I did that I noticed that I had about 1GB or so left of storage. This shocked me, because the disk was just suddenly filled for some reason. In hopes of fixing this I used an app called 'CleanMyMac' to try and recover the disk space. And as I thought the disk space returned to normal. However when I went to Disk Utility and clicked 'repair disk' it said this...
There is only 1 partition, so the Boot Camp process did fail.
I don't know whats wrong with my system though? I would like to install Windows, but I'm worried that I might recieve errors again. I have not got Apple Care, but I'm playing on buying it soon, due to it being almost a year since I bought the system.
Maybe I did something wrong when trying to install Windows with Boot Camp? I don't know, but if possible can someone please tell me if I can install Windows and if something is wrong with my system.
Here is some additional screen shots of the type of system I have.
Thank you for your help with this issue!

Which copy or version of Windows? and how where was it purchased?
my window installed itself perfectly on another computer.
One copy and you want to activate on two computers?
With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s).
did you create 80GB or larger partition?
also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
OWC has up to 32GB, not cheap.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
Crucial is usally very helpful, try email cs.

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

Whole disk encryption with boot camp?

Similar Messages

Maybe you are looking for