Whre the data is stored when the process terminates in the GP

Hi Experts,
I have a requirement to maintain data even when the process terminates in GP. I want to use those data for reporting purpose.
There is 1 approach to achieve above requirement
1) Create a ztable in R/3 and store the information at each action in GP. so that using function modules i can get those data for reporting.
But i just don't want to use the above approach. I just want to know is there any feature available in CAF, so that i can get the data of process, which is already terminated. Can anybody give me the suggestion regarding this???
Regards,
Shyam Prasad

Hi,
You can try out this code:
IGPRuntimeManager rt = GPProcessFactory.getRuntimeManager();
IGPProcessInstanceInfo[] completedInstances = rt.getCompletedInstances(GPSearchRole searchRole, Date startDate, Date endDate, IGPUserContext userContext) ;
Also please see the javadoc.
Regards,
Satyajit.

Similar Messages

In which table the initial balances will be stored when loading via api

Hi all,
I am doing initial balances migration...
In which table the initial balances will be stored when loading though an api.. (pay_balance_upload.process).
First I have loaded data in to pay_balance_batch_headers and pay_balance_batch_lines tables..
Then called the api pay_balance_upload.process. and the data was reflecting correctly in front end.
But we need to reconcile the loaded data.. for that, can anyone please tell me in which the loaded balances would be stored..
I have identified two tables, pay_assignment_latest_balances
and pay_latest_balances
when I try to create a balance from frontend I can see the data in pay_latest_balances table..
But when I load via api I am not able to find it in any of these tables..
In addition to that can anyone please tell me when the data will be populated in pay_assignment_latest_balances and pay_latest_balances tables.
Awaiting for your help and quick response..
Thanks and Regards
Kishore

You have followed the correct process..As Vignesh said, you can use pay_balance_pkg.get_value to make sure you have the correct values uploaded but otherwise if you are able to see the values in the front end I wouldn't worry about the latest balances tables. These tables, as the name indicate, hold only the latest values and if a payroll (ran post the initial balance upload) has been rolled back, these are deleted since they are no longer available.
You can refer the below Metalink notes for a detailed explanation:
The Secret Life of Initial Balance Upload with Screenshots Example [ID 60057.1]

HT5262 where does the information get stored when you back up your i-phone? It just reports its done but I have no idea where to find it if I need it again!

Where does the information get stored when you sync/back up your i-phone. I have no idea where to look if I need it again!
Thanks

You can chhose the backup when you would reset your device. In this case you would get the option, during the set up process, to choose your backup and restore your device from it.
(You can find a few information e.g. size and date of your backup in "Settings > iCloud > Storage & Backup > Manage Storage")

UJK_EXECUTION_EXCEPTION:Data records rejected when writing to the cube

Hello,
I ran into an issue while testing Script using UJKT.
I can plan the same intersection/record from BPC template but it doesn't work from Script/UJKT.
I checked work statuses, scripts, rules. Found nothing that locks the intersection.
Anything else I should check?
Is there a way to find out more detailed log to see why the data records are rejected.
Appreciate your help. Thanks.
P.S. I looked at many scn posts on this error but nothing really helped.
UJKT Log:
#dim_memberset=9
REC :%VALUE% * 110
CALCULATION BEGIN:
QUERY PROCESSING DATA
QUERY TIME : 571.13 ms. 1 RECORDS QUERIED OUT.
QUERY REFERENCE DATA
CALCULATION TIME IN TOTAL :197.47 ms.
1 RECORDS ARE GENERATED.
CALCULATION END.
ENDWHEN ACCUMULATION: 1 RECORDS ARE GENERATED.
UJK_EXECUTION_EXCEPTION:Data records rejected when writing to the cube

Thanks Vadim. I debugged UJKT but didn't find anything helpful yet.
Will keep digging.
Here is the script.
*XDIM_MEMBERSET CAP_VIEW = 27
*XDIM_MEMBERSET PPS_TIME = 2014.03
*XDIM_MEMBERSET PPS_ITEM = 52540046EAC51ED3B2E49C10DBDB1565
*XDIM_MEMBERSET CAP_GRP = ZHM_IT00050001
*XDIM_MEMBERSET PPS_ENTITY = US
*XDIM_MEMBERSET CAP_CATG = ZHM_IT0005
*XDIM_MEMBERSET PPS_ACCOUNT = COST
*XDIM_MEMBERSET RPTCURRENCY = USD
*DESTINATION_APP=PPS_PLANNING
*SKIP_DIM = CAP_CATG,CAP_GRP,CAP_VIEW
*ADD_DIM PPS_CATG = ZHM_IT0001
*ADD_DIM PPS_GROUP = ZHM_IT00010001
*ADD_DIM PPS_VIEW = ZHM_IT0001000127
*WHEN PPS_ACCOUNT
*IS COST
*REC(EXPRESSION=%VALUE%*10)
*ENDWHEN
*COMMIT
LGX:
LOG:
FILE:\ROOT\WEBFOLDERS\HM_PLAM \ADMINAPP\PPS_CAPPLAN\TEST.LGF
USER:SMULLAPUDI
APPSET:HM_PLAM
APPLICATION:PPS_CAPPLAN
[INFO] GET_DIM_LIST(): I_APPL_ID="PPS_CAPPLAN", #dimensions=9
CAP_CATG,CAP_GRP,CAP_VIEW,MEASURES,PPS_ACCOUNT,PPS_ENTITY,PPS_ITEM,PPS_TIME,RPTCURRENCY
#dim_memberset=8
CAP_VIEW:27,1 in total.
PPS_TIME:2014.03,1 in total.
PPS_ITEM:52540046EAC51ED3B2E49C10DBDB1565,1 in total.
CAP_GRP:ZHM_IT00050001,1 in total.
PPS_ENTITY:US,1 in total.
CAP_CATG:ZHM_IT0005,1 in total.
PPS_ACCOUNT:COST,1 in total.
RPTCURRENCY:USD,1 in total.
REC :%VALUE%*10
CALCULATION BEGIN:
QUERY PROCESSING DATA
QUERY TIME : 1038.58 ms. 1 RECORDS QUERIED OUT.
QUERY REFERENCE DATA
CALCULATION TIME IN TOTAL :173.04 ms.
1 RECORDS ARE GENERATED.
CALCULATION END.
ENDWHEN ACCUMULATION: 1 RECORDS ARE GENERATED.
UJK_EXECUTION_EXCEPTION:Data records rejected when writing to the cube
Thanks,
Vasu

Does sysvol migration in windows 2008 R2 DC, requires any specific steps, if the AD Data are stored not in C drive of the server?

With one of our client, the windows 2008 R2 Active directory data are stored on D drive of the PDC (NTDS DATA, NTDS Logs and SYSVOL) and on the other 2 Dcs, they are on different drives too.
So my question when we do the sysvol migrations to DFS, do we have to add any specific command or script other than the usual migration commands?

Hi Zac Kurian,
As far as I know there don’t have issue when you migrate your SYSVOL which locate on others partition. If you worry about the DFSR health, you can enable the DFSR report then
monitor the DFSR health status, otherwise, please confirm you have installed the DFS known issue hotfix on your server.
The hot fix download URL:
List of currently available hotfixes for Distributed File System (DFS) technologies in Windows Server 2008 and in Windows Server 2008 R2
http://support.microsoft.com/kb/968429/en-us
About how to enable the DFSR health report please refer the following information:
Create a Diagnostic Report for DFS Replication
http://msdn.microsoft.com/en-us/library/cc754227.aspx
Automating DFS Replication Health Reports
http://blogs.technet.com/b/filecab/archive/2006/06/19/automating-dfs-replication-health-reports.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Table where the Delivery date is stored in Confirmation tab on Me23n

Hello ABAB Gurus,
Can anyone give me the table name where the Delivery date is stored in Confirmation tab in Item in ME23n.
If anyone is aware of it then please let me know .
Sagar

Hi,
Check the table EKES and field name is EINDT..
Thanks,
Naren

My iPhone 3s keeps showing that there are updates from the ap store but when I try to update it says all apps are up to date. Also when I select purchased apps it just gives me a blank page and not a list as expected

My iPhone 3GS keeps showing I have app updates but when I go to
App Store It tells me all apps are up to date. Also when I select
purchased apps It just gives me a blank page.

Launch iTunes. From the menu bar click Store / View My Account
Click: Edit Payment Information
Make sure you have the correct Security Code.
Then click: Done
And try resetting your Apple ID password. https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

How to check the date and time when a material is blocked

Hello,
Please tell me how can i check the date and time when a material is blocked or unblocked.
Regards,
Priyanka

Hi Pryianka,
Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
BR
Csaba

I was backing up my iphone by changing the location of library beacause i don't have enough space.My phone was taking too long to copying file so i can celled it.the data is stored in desired location . And now i can't delete that back up

I was backing up my iphone by changing the location of library because i don't have enough space.My phone was taking too long to copying file so i can celled it.the data is stored in desired location . And now i can't delete that back up.
Also tell me about the performance of iphone 4 with ios 7.1.1...........
T0X1C

rabidrabbit wrote:
Can I back up my iPhone 4S to my ipad 3 (64 gb)?
no
rabidrabbit wrote:
However, now I don't have enough space in iCloud to backup either device. Why not?
iCloud only give so much space for free storage, then if you exceed the limit of 5gb you have to pay for additional storage.

HT203167 I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

The iTunes application should be installed on the system drive. You may need to repair iTunes to fix that error regarding a missing .exe.
To organize your library properly see Make a split library portable.
If you don't have a working version of the library that can be transformed into a portable shape I have tools and techniques that can repair the broken links.
tt2

Beginners question - making sense of form, item, pane & variable (with relation to where data is stored in the SQL database)

Hi Everyone,
I am new to writing reports (SQL code) for SAP, however I am aware that inside SAP Business One it is necessary to enable System Information (from the View menu) in order to see which tables (and related table attributes / column names) are related to various aspects of the various SAP 'modules' (e.g.: A/R Invoice).
Using an A/R Invoice as an example I can see at the row (or line) level that an item with the description of 'Opening Balance Transfer' is contained in the table INV1, within the attribute (or column) called Dscription.
However not every 'on screen object' shows a table / attribute. For example in the same A/R Invoice if I hover my mouse over the Balance Due field all I see is Form related information.
My question is 'How do I make sense of the Form, Item, Pane, Variable information?', with relation to where data is stored within the SQL database?
Links to online tutorials explaining how this feature of SAP Business One will be much appreciated, along with any personal advice regarding working with this information.
Any (and all) help will be greatly appreciated.
Kind Regards,
David

Hi David,
1.Here I am explaining use of each field except pane
a. Form ---> Used in additional authorization creator
b. Item, column--->Useful in creating Formatted search queries (FMS)
c. Variable --> Some of the field values based on another values. ie. indirect values.
d. INV1---Table name
2. How to get variable?
As per your second attachment, to get balance due ,you need doc total field from OINV table. For example,
SELECT T0.[DocNum], T0.[DocTotal] FROM OINV T0 WHERE T0.[DocNum] = 612004797
Thanks & Regards,
Nagarajan

Wcf Data Service fails when more than 8properties in the 'select=' portion

Hi:
I am using WCF Data Service and Oracle
EF Provider is ODAC11.2 Release 4
Wcf Data Service fails when more than 8 properties are specified in the 'select=' portion of the URI
here is my code
var q = from c in this.ctx.SALESORDER_ITEM
select new
c.SORDERDETAILID,
c.IID,c.DMFLAG,c.OWNERID,c.SKUID,c.SKU_ID,c.TRADENO,c.SOURCEID,c.SORDERID
excetion:
InvalidOperationException: An error occurred for this query during batch execution. See the inner exception for details
The inner exception is null, but the DataServiceClientException states: Value cannot be null Parameter name: value
the exception is thrown in base.OnStartProcessingRequest(args) method (overridden).
Here is the call stack as well:
at System.Data.Services.WebUtil.CheckArgumentNull[T](T value, String parameterName)
at System.Data.Services.Internal.ProjectedWrapper.set_PropertyNameList(String value)
at lambda_method(Closure , Shaper )
at System.Data.Common.Internal.Materialization.Coordinator`1.ReadNextElement(Shaper shaper)
at System.Data.Common.Internal.Materialization.Shaper`1.SimpleEnumerator.MoveNext()
at System.Data.Services.Internal.ProjectedWrapper.EnumeratorWrapper.MoveNext()
at System.Data.Services.DataService`1.SerializeResponseBody(RequestDescription description, IDataService dataService)
at System.Data.Services.DataService`1.HandleNonBatchRequest(RequestDescription description)
at System.Data.Services.DataService`1.HandleRequest()
Is there a max number of properties in $select statement
I think may be it is oracle provider's problem ,but i don't konw how to debug it Can anyone help me
Any help is greatly appreciated

I believe the null/empty string issue is unrelated to the 8 column issue, at least for ODP.NET. For example, let's take the original query in the OBE:
http://.../yoursvcfile.svc/EMPLOYEES?$select=EMPLOYEE_ID,FIRST_NAME,LAST_NAME,SALARY,DEPARTMENT_ID,DEPARTMENT,EMAIL,PHONE_NUMBER,MANAGER_ID
Let's make all the columns selected not nullable. You can do this with the Oracle Dev Tools. Specifically, PHONE_NUMBER and FIRST_NAME are the only nullable fields. I make them non-nullable and re-run the query and the same error occurs. Thus, these values should never be made null. Moreover, in all 107 rows, none of these row values consist of empty strings anyway.
Looking into the problem further, WCF DS is calling methods in the System.Data.Services.Internal namespace.
http://msdn.microsoft.com/en-us/library/system.data.services.internal.aspx
Specifically, we see your issue when the ProjectedWrapperMany method is called. You will notice that there is ProjectedWrapper0, ProjectedWrapper1...ProjectedWrapper8 methods also present in the same namespace. As soon as the number of columns exceeds 8, ProjectedWrapperMany is called and we see the error. We're going to ask MS to help analyze the issue since this is an .NET-internal method being called.

How to get backed up data in iphone3gs when the phone is disabled

how to get backed up data in iphone3gs when the phone is disabled

can someone help? this is shaking my trust in icloud backups.
i am on iOS 6.1.

Insert data to MySQL when there is new data in the text file

I have one log file, the log file will update its data (alarm type & datetime) when there is alarm. If I would like to write program to monitor the log file every minute, and insert the data to mysql when there is a new data in log file. Any Idea how to use java to write it ?
Thanks !

imagination21 wrote:
Any Idea how to use java to write it ?Yes. But do you have a specific question? What's the problem?

Whre the data is stored when the process terminates in the GP

Similar Messages

Maybe you are looking for