Why and when can I use the "NotBoundException" in my RMI?
why and when can I use the "NotBoundException" in my RMI?
The answer to this is contained in the documentation which you should have read before posting to this forum.
Similar Messages
-
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
-
When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, RichIn order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.
-
I bought student version for cc and still can't use the apps
I bought student version for cc and still can't use the apps and when i sign in only the free CC membership appears I also chick the bank the transaction was successful and i only resieve a confirmation email. i need to work with these apps so badly ... i hope i can fix it asap
Does your subscription show on your account page? https://www.adobe.com/account.html
-
Recently downloaded a trial version of CC and when trying to use the Adjustment Brush in ACR it brings up the message 'All the local adjustment controls are set to have no effect on the image'. I've downloaded this as an update to CS5 on my new i Mac. Would appreciate suggestions to remedy this. Rhonda
I think it means "the sliders are all 0 so painting adjustments with this brush won't change anything." In other words, move one of the sliders to a non-zero position, for example Exposure from 0 to 1.0, and then see what happens. You can edit the brush and change it to do something other than Exposure +1.
-
I bought a second hand 4s iphone and I can't use the internet on 3g even though it looks like I'm connected ... can you help please?
Who's your carrier?
What country are you in?
Was it from a shop or a personal deal?
If your phone doesn't function on the cellular network, goto the carrier first -
my iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah… Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). -
I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?
Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"
-
I forgot my password and email Forgot your private cloud small my daughter and I can not use the device jewelery Is there another way to run the machine?
I hope there is a solution to this problem note that I can not use the iPad nowYour question makes no sense and I'm not sure if you typed very quickly and autocorrect went nuts on you, or if you are not a native English speaker and Google Translate didn't work properly. If you are saying that you forgot the passcode to unlock the iPad, follow the instructions here.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support -
When can we use the Adobe Creative Cloud in china?
when can we use the Adobe Creative Cloud in china?
Hi There,
Kindly check the link mentioned below.
when can I buy Adobe CC in China?
Thanks,
Atul Saini -
My daughter has used our iPad for her Apple account and now I can't use the App store because her username automatically shows up in the Apple ID window. How do I change that so I can put our Apple ID in with the appropriate Password?
Open Settings -> Store
Tap on the Apple ID shown and sign out. Then sign in with your own Apple ID.
Update: Oops, AnaMusic was faster... -
I bought iPhone at Verizon-is it unlocked so I can put in an Italian SIM card in when I am traveling there. Can I use the iPhone as a hotspot?
No.
If a 4S, Verizon must unlock the GSM portion which then can be used with another carrier's SIM card outside of the US.
Being able to tether the iPhone is carrier dependent. -
I had a update pop up on my phone and i clicked on it...now I tunes is showing up and I can not use my phone
It means it's in recovery mode.
http://support.apple.com/kb/HT1808 -
because "it uses too much power"
I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
Question 1: How do I solve the problem? (Without going back to Snow Leopard)
Q2: Why this parential supervision by Apple?riks1105 wrote:
because "it uses too much power"
I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
Question 1: How do I solve the problem? (Without going back to Snow Leopard)
Q2: Why this parential supervision by Apple?
Get a powered hub
USB is cranky, you're not the first (probably not the last) to have this happen. -
I recently got the iPhone 5S, and when I am talking, my cheek will touch the various buttons on the scene, and I am calling, going mute, or touching the keypad, and such. How can I get the phone screen to stop doing this while I am talking. I have IOS 8. Thank you. Please reply in simple terms, as I am not the best at understanding how to fix things. Thanks again.
First, try a reset to see if that clears it up:
Hold down the home button and the power button together until the screen goes black and the Apple logo appears, then let go of the buttons. This will not cause any data loss and is like a reboot for your phone.
Maybe you are looking for
-
Question About Text Message With LG Env3 phone
I'm getting an arrow and it's sending a text from one Verizon phone to another. What does this mean? <Branched to a new discussion for more exposure.> Message was edited by: Verizon Moderator
-
HTML held in DOM (as XML) rendered onto JEditorPane
I am interested to know if anyone out there has any ideas on the following?: I am holding an html document as a DOM object as it is part of an xml message (which undergoes various transformations) that is passed through our software. The problem is t
-
Hello, I'm having an issues trying to enroll a Mac for a certificate. I've already installed the Enrollment Point and Proxy Point, modified the default client settings to create a Mac profile, and configured the MP, DP to use https with internet cli
-
TV SERIES outside the United States
How's it possible to purchase tv episodes from american tv in Europe with my account in iTunes? Totally impossible? What if I buy itunes checks online and I used them for buying those episodes? would it work?? I'm fan of TV series already being broad
-
Entering information into a converted word document
I converted my PDF into a word document. How do I enter information? I'm trying to "type" information onto an application.