Why are bookmarks being created whenever I Insert a blank page?

I am currently using a trial version of Adobe Acrobat Pro XI. I notice that whenever I want to edit my PDF and insert a blank page into the pdf that a bookmark will be created for each blank page that I am adding. I am wondering if the bookmark creation tool was some automatic selection that is applied when you create the blank page? Is it possible to turn it off? This can become quite a hassle if you are adding a number of blank pages sporadically throughout the document.

I am also trying to do this same thing.
I have followed the text as it is stated in
http://otn.oracle.com/products/reports/htdocs/faq9i.htm#43
but it still does not work.
My invisible line prints on every other page, however
my repeating frame prints on every page with no page breaks.
Do you have any suggestions?
Thanks in advance,
Vicki

Similar Messages

Acrobat Pro XI - Inserting a blank page creates a bookmark

When I insert a blank page Acrobat automatically creates a bookmark pointing to that blank page. Is there a way to prevent this behavior?

It's likely a HTTPS site or you have an authenticating proxy server where you are required to enter a password to acess the web page.

Bug? Design-Notes are still being created (checkbox unchecked)

Hey there,
i've got an issue when using DW (CS6).
Although i've unchecked the design-notes option und used the delete old _notes-button (that at least worked outstandingly ;- ) ) "_notes"-folder are still being created in my project.
Is this a well known issue under some circumstances?

It's a handy feature to keep even if you're not in a team environment. You could still do with the notes, but not upload them remotely.
If you're in a team, this is critical to maintain sync.
Unchecking design-notes will not stop creating these folders. If you're keen on still doing this, follow these steps:
Go to "Manage Sites" in the site dropdown list
Select the site you want to remove _notes folders from
Click "Edit"
Click "Advanced"
Click "Remote Info" in the Category list
Uncheck "Maintain Synchronization Information"
Click "Design Notes" in the Category list
Uncheck "Maintain Design Notes"
That will disable creation of _notes folders for your site.
If you want to delete all _notes folders for your site after you've chosen to stop creating new ones, click "Clean Up" button once.

Why are we being pushed to upgrade to iOS 8 when it isn't compatible with Maverick?

Why are we being pushed to upgrade to iOS 8 when it isn't compatible with Maverick? I just tried to open an iCloud document after upgrading to iOS 8 in all my Apple smart devices and OSX 10.9.5 on my MacBook Pro, only to be told that the new iCloud isn't compatible with Maverick and that I should upgrade to Yosemite. Problem is, Yosemite is only available as a Beta and won't have a public release until Oct. 21. Why would Apple cut its users off from iCloud like this?

plotdot wrote:
Checking with my better half, I'm now even more perturbed. According the the iCloud Drive FAQ, it's compatible with PCs running Windows 7. The current Windows OS is 8, which means Apple made iCloud backwardly compatible with Windows, for PC users, but not for its own customers. That *****.
iTunes customers are Apple customers, what are you going on about?

HT5557 Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something. Anyone have any tips on this? Thanks, Mark

Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something. Anyone have any tips on this? Thanks, Mark

To enable the form to be signed in Reader you will need to open the form in Acrobat; goto Advanced>Enable Usage Rights and then save this copy of the form for sending out to the users.
The user should then be able to edit and digitally sign the form. They can then email the signed/saved pdf as a browsed for attachment or via the email icon in the toolbar. Note - if you have created an email submit button on the form, then unless they have Acrobat they could only return an xml file.
The other way to do this however is to create a dataset by 'distributing' the form. This time the Email Return button will send back a full version of the form. During the distribution setup you will have the option to email the form directly or to save it and send it later,so you can send to users as and when or even post it to a website or intranet.
When you receive and open the returned form it will ask whether you want to add it to the predetermined dataset (or if you want to categorise the returns into geographical areas for example, you could create new additional datasets at this point). If the form is data heavy however, the dataset will become very large and unwieldy pretty quickly, but you can export the data from it (including signatures) in xml format and import this into an Excel spreadsheet.
To simplify the Excel xml import process I'd recommend you carefully structure your form in the hierarchy (LiveCycle) into the order you would want the data items to appear in your spreadsheet and switch off those data items that you will not need by setting the default binding for the irrelevant fields to "None".
Clear as mud? Hope this helps.

Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

Acrobat 8 is not compatible with Windows 8, for the simple reason it was
created much before it and Adobe could not participate the changes to the
OS that Microsoft implemented many years later on. You need to buy the
current version for compatibility.

Apps being moved around with sync - unwanted blank page inserted

Ever since I bought a few new apps (craigspro+, vision test, etc, nothing too big or fancy) last night, when I sync my phone with my iTunes, it moves all the apps around, inserts a blank page onto my phone, and most of my new apps are inserted on a page AFTER the blank page and therefore I can't reach them once the phone is disconnected from my iMac and in hand. I've tried restoring, I've tried manually moving them all around in iTunes, and every time i hit "Apply" they bounce back to where the computer wants them and I can't even reach the new apps. What's up and how do I fix this???

Hi,
you can automaticaly fix previously made documents using the Preflight tool.

Inserting a blank page in webi

Hello All,
I have created a webi report with different sections in report.
My requirement is to insert a blank page before each new section in webi.
E.g If I have report with section Country and Region, then first blank page would get inserted before Coutry-->then country data would get displayed--->Again a blank page gets inserted and then Region data would get displayed.
What would be the way to achive this requirement?
Regards,
Chinmay

Hi Chinmay,
You could use relative positioning and place the second section far enough below the first so that it prints a blank page in between the sections. You might have to play with it some. It will also depend on how you are printing the report - PDF or other.
You may also want to check the section property "Start on a new page"
Thanks

I have a doc with pictures and I want to insert a blank page a top

When I insert a page break the photos within the text stay and do not shift down as I want. Or I insert a blank page and it only inserts at the end of the doc. I want a blank page at the top. How can I keep my text and photos in place and insert simply at blank page at the top? Thanks.

Menu > Insert > Section Break
before and at end of where you want breaks. Not Page breaks.
Your images are floating, if you want them to move with the text you will need to paste them into the text as inline objects.
Peter

Preview keeps freezing when I try to insert a blank page

I have been trying to edit pdf's, all is well until I try to add a blank page in the pdf and preview freezes. When this happens, I force quit, open Preview, and then insert a blank page - sometimes this doesn't work and I have to try multiple times before the page can be added.
Is there a way to fix this?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Pages '08 creating unwanted sections, cannot delete blank pages

I'm in a bind - and in a rush - and Pages is misbehaving. I've been duplicating pages in the thumbnail viewer to maintain formatting, and then replacing text in text boxes. Suddenly, when I go to duplicate a page, Pages creates a section with a blank page attached and I cannot get rid of the blank page. When I try to delete the blank page, it also deletes a page of content.
This is frustrating, and I really need to get this project to the printer tomorrow.
Thoughts?
Message was edited by: C2V

Peggy wrote:
I started working with invisible characters showing several years ago in AppleWorks as it makes it easier to see these formatting characters.
I can't agree more.
I work with many differents desktop publishing softwares since many years,
and one of the key function I always let on is:<pre>
View > Show Invisibles</pre>
You'll save you a lot of time fighting against these invisible functions.
I fully understand the need for invisible functions for the dummies,
because they have no need to understand. But when these invisible functions
start to move things without your knowledge, they start to kill your
time and your job .
<pre>--------
As long as you'll see students making graphics with pen on paper,
you'll see the missing keystone of the software empire.
dan</pre>

File names are not being created correctly!!

Problem I have, and it seems to be an issue with iTunes in Windows and not Mac or in Windows Media Player for that matter.
Anyway, the problem is that the files are not being written as they are displayed in the Album Data in iTunes itself. It just appears as though iTunes will create any length of file name it wants and not the one that you create??
The reason I have an issue with this, is because I am trying to create one large album directory on an external Hard Drive connected to my Router so that any machine I have on the network can access it from there as opposed to creating a directory on every single machine.
I have a tone of discs that I am loading up and just felt that having one large directory on a networked drive would be the best route to take.
The machines I will be using to access the files using iTunes is my Mac Mini and my Windows PC depending on what room I am in, and then probably a few other devices scattered around the house to make up a Media network.
Anyway, the issue is with the file names.
It just seems that Windows iTunes wants to create whatever file name size it pleases, where as Mac iTunes and Windows Media Player seem to create the files as listed in the Track List and Album File Data.
It would seem that Windows iTunes has a serious bug in it's File Structure Handling which is a pain in the proverbial.
Just to test this out, I created the same Album both in Windows and Mac and the Mac version had the full file name structure but the PC one doesn't, however, Windows Media Player created it exactly the same as Mac iTunes.
It definitely appears as though there is an issue with iTunes in Windows, because it creates other albums without a problem. It just seems to pick and choose as it pleases.
Anyone else get this or know if there is a way to fix it??

Katrina S. wrote:
I'm not sure what you mean. Perhaps if you gave a specific example?
I put my CD's into iTunes so that they go in Album Format with the albums in seperate folders and the song names as they are retrieved from the internet, so that they are not songs all in one long Directory Listing. (Unless of course there is another way of using iTunes??)
When using iTunes on Mac or the Windows Media Player, all the songs are loaded onto the computer as they are written in the descriptions downloaded from the web.
Example in Directory format:
Artist Album Song Name
Queen - Innuendo - 08 These Are The Days Of Our Lives
This works fine in Mac iTunes or Windows Media Player. However, if I'm using iTunes in Windows, it may give me the following,
Artist Album Song Name
Queen - Innuendo - 08 These Are The Days O
Now, that is just an example and not a song that is affected, but it gives you an idea of what happens. It appears to happen on any Album and File Name combinations, and only appears to happen when using iTunes in Windows. The much longer filename and album names seem to be far more affected and I think this is to do with Windows Naming structure, but it doesn't explain why it's not happening in Windows Media Player??
The problem with this, is that when trying to use the same File Directory stored on my external Networked HDD for both Apple and Windows iTunes, the Windows version is causing havoc by doing what it wants where as the Apple iTunes seems to work as intended.
So when it comes to using either to rip a new CD to the library, I have to start using the Mac Mini each time because it seems to not be causing any issues when ripping discs.
I'm still in the process of sorting out my Album Directory and having to load everything up on the iMac so that everything gets loaded properly, but this seems to be a really bad bug in iTunes.
The reason I want to use this external NAS HDD is to keep my data in one area as opposed to having two large directories for both machine formats.
I hope that is a little more clear on what is happening.
P.S. Just to add to this. I prefer to use the PC for CD Ripping because the CD Drive is much faster than my Mac Mini and doesn't get anywhere near as hot when used constantly. I can rip 20 albums or more on my PC in the time it takes to sometimes rip just 5 to 10 on my Mac Mini, which is why I wanted this to work properly on the Windows version of iTunes.
Message was edited by: Capeview

Problem in ABAP Proxy(sometimes XML Messages are not being created)

Hi,
I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side. I called my proxy method in BADI : DELIVERY_PUBLISH.
And after calling the method, I used commit work also.
But the problem is, some times it is working fine. and some times the XML messages are not getting created. When I go in debug, looks everything is fine.
I am unable to understand why this inconsistency.
Could you please help me out, do I need to take any more precautions.
Thanks,
Sandeep

You mean you can't find any message in SXMB_MONI of your ECC or is it XI where you can't see message?
If you have not checked in SXMB_MONI of ECC then may be messages are created but they are going into error and that's why you are not able to see any message in XI.

Why are texts being received as MMS messages?

Why are texts I send being received as MMS messages?

We want to get your text messages working properly NickBob! I know it can be annoying downloading the email to view your messages. What is your make/model of your device? When did you start having this issue? What messaging application are you using?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Why are images being copied from a linked library that aren't modified

I'm trying out the linked library feature and that is my preffered way of using iPhoto but I notice that many images that haven't been modified in iPhoto are being copied as full res modified images. My camera Nikon D2x supports auto rotation of verticle images which keeps me from having to manualy rotate these images. I understand that when I modify an image using iPhoto's tools that a full res image will be copied into a modified folder but why are images that have simply been tagged in camera as needing rotation being copied as well. Vertical images account for at least half of all images I shoot and diplaying them properly should be a look at exif or other metadata and applying rotation but since they are images straight from camera they shouldn't show as modified. Anyone have experience or suggestions on how to avoid having auto rotated images show as modified?

blinden:
Welcome to the Apple Discussions. I ran into that but in a different way. I had all of my image files in folders on a second HD and used another application to manage them. I decided to use iPhoto's alias method to work with the same files. I got a lot of files that were copied over as modified. Have no idea why. I ended up doing global revert to Original several times, watching the Modified folder via the Finder, until it became empty. I then closed iPhoto, dragged the Modified folder to the trash and then launched iPhoto with the Command+Option keys depressed and rebuild the library using the first three options. That worked and got me a pristine library.
I had not figured out why that happened. I've had the auto-rotate turned off for about a year now. Had I know what was causing it I could have checked to see if all of those bogus modified files occurred before I had turned off that option in the camera. I'm guessing now that that's what I would have found. Thanks for the info.

Why are bookmarks being created whenever I Insert a blank page?

Similar Messages

Maybe you are looking for