Why are unwanted vi files produced when building executable?

I'm using LabVIEW 9, and when I build an executable, it creates 3 unwanted folders containing a number of .vi files that I don't want to have. The 3 unwanted folders that are automatically created are:
NI_HTML, NI_report, and NI_Standard Report
Why are these folders with numerous .vi files created automatically, and where is the option to exclude these when building the .exe? Ok thanks
Solved!
Go to Solution.

I assume this is a executable build description is created in LabVIEW 8.6 (or earlier), look in your LabVIEW 2009 build settings, there should be an option 'Use LabVIEW 8.x build layout' (or something similar), this is probably checked, please uncheck.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Similar Messages

Why are ACR PSD files 10-20 percent larger than the same file resaved in PSD?

Why are ACR > PSD files 10-20 percent larger than the same file resaved in PSD? I posted this many years ago and never found an answer. Now that my drives fill up quicker, I thought I might chase this question a little bit further.
Same .CR2 saved within ACR either with cmd-R or open ACR within PSD, the saved file is 34.5mb. Resave that same file (no edits) within PSD either with or without Max-compatible and the file is now 30.7mb. Another file that is 24.5 becomes 19.5MB.
Why the difference? Is ACR and PSD actually using different compression strategies?
thanks.
Mac 10.8.5 / CC / ACR 8.4.1 - but this has been a consistent behavior over many years and versions, CS6 / CC.
Same .CR2 saved within ACR either with cmd-R or open ACR within PSD, the saved file is 34.5mb. Resave that same file (no edits) within PSD either with or without Max-compatible and the file is now 30.7mb. Another file that is 24.5 becomes 19.5MB.

Hi Jeff
If it is RLE it's not as efficient as LZW:
Saved ACR>PSD = 40.1MB (sample image this AM)
opened in PS and resaved as PSD = 30.8MB
resaved as TIF without LZW = 40.1MB (this adds to your thought that the ACR>PSD doesn't us any compression)
resaved as TIF/LZW = 9.6MB
Jeff Schewe wrote:
I really think your priorities are a bit off. 10-20% is meaningless...you just need to get bigger.... and quit fussing over a few GB's here or there...
??? I hope that the Adobe engineers are fussing over 10-20% efficiencies.
I'm within arms reach to a rack of 40TB of drives (doesn't include off-site drives), and all 2TB drives are being recycled to 4TB drives, as a result the rack is always growing. Actually the ACR>PSD files don't really make a difference in our long term storage, only for the nightly backups. But anyway, how you save, what you save etc. should all be part of the discussion.
.... so in my case, throw in an excess MB here and there and all of a sudden you are talking TB's. Plus advantages in backup times, drive life, and energy use.
Somebody added compression into the PS>PSD format, but it wasn't included in the ACR>PSD format, was it a decision or an oversight? If it's just a matter of making ACR compatible with PS when saving the same PSD format..... then why not?
regards,
j

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Why are my exported files not going to me email? I have used 3 different ones.

Why are my exported files not going to my email (receipts & business card)? I have used 3 different ones...2 yahoo and 1 hotmail. I have checked spam box also.

For the Receipts app I chose to export the info as a PDF file..an email was requested..I entered info and clicked send. For the Business Card app I chose Send, not Print..an email was requested..I entered info and clicked send. I haven't received anything, not even in my spam folder.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?

Why are website icons now removed when history is cleared?

Hi,
Just a very quick question:
Why are website icons now removed when you clear the history in Safari?
I have noticed this in the current Lion (and Mountain Lion) versions, this happens, when in previous versions they remained after clearing the history.
Is there any way to change this?
Thanks!

Safari 6
Safari > Help (menu in the menubar) > Show All Help Topics
Search term "Clear History".
"Clearing your history also empties caches, removes website icons, and clears the list of recent searches. Website icons are small graphics that help identify sites on the Internet. You see them in the address and search field, the bookmarks list, and other places. You can see your recent searches by clicking the magnifying glass at the left end of the address and search field when it’s empty".
That is how clearing history works in Safari 6.
There is no way change it.
Best.

Language Problem when building executable

I'm having a weird issue when building executables. Labview seems to forget the english language. I have tried selecting English exclusively as the run time language but when i do that i get a "No supported languages installed!" error. Everthing works fine in the development environment. It only seems to apply to application menus and not custom user menus. Thanks for any insight.
Solved!
Go to Solution.
Attachments:
Language.png ‏3 KB

Hello Jed394,
I took a look into the issue, just to be sure the error thrown was “No support Language Installed,” correct? Check to see if the language of your operating system and the language LabVIEW is using is English. If these are both English, then it looks like this is an error due to installation issues in the run-time engine. Try to perform a repair by going through the install menu of LabVIEW. The following link will help you with the repair: http://digital.ni.com/public.nsf/allkb/FE6B641E86E55AF2862576DE00038001?OpenDocument
If you have any further issues, please let me know. Thanks!
Matt S.
Industrial Communications Product Support Engineer
National Instruments

Why are all my paths disappearing when I save some files as jpegs?

I have 2 identical PSD files. Both have 10 different paths that are identical for each file. When I flatten and save one file as a jpeg the paths stay in the file just fine as is usually the case. When I open the jpeg the paths are still there as they should be.
When I save the other file as a jpeg all the paths are there after I've saved the file and BEFORE I've closed the file. After closing and reopening the file the paths are all gone. If I save the same file as a tiff the paths all stay as usual.
I've never seen this happen in almost 20 years of using Photoshop.
Anybody have any ideas?
Thank you

I am NOT using "save jpeg for web" just to be clear.
If I were, then the other image wouldn't be keeping any of its paths either.
I am using "Jpeg" in the Save As dialogue box.
If I edit the jpeg that lost its paths after opening it and hit "Save" it gives me the compression options dialogue box. Other jpegs just "save" when I hit save, I've never had a jpeg give me that dialogue box before when hitting just "Save".
If, after opening the image that lost its paths, I paste a path into that image and hit "Save"(using one of the same original paths from the same original psd file), it gives me the compression dialogue box. If I complete the "Save" and reopen the image, voila, the path I pasted into it is still there, and, if I edit the image and hit "Save" it becomes normal again and saves without showing the compression options dialogue box.
Photoshop CS6 version 13.0.5
iMAC 27"
12 gigs of RAM 5 gigs free
800 gigs of free space on the system drive
Snow Leopard 10.6.8
Disk Permissions Repaired
There really is no reason for this to happen. There are no differences in the images except for the content of the image and the file names.
I have tried new file names and still the same result.
I have tried working from the Desktop and still the same result.
This is a serious bug.

Why are my ".pdf" files not opening in Creative Cloud? The tumbril shows up as a blank page!

I just switched over from Adobe Acrobat Cloud to Creative Cloud; a tedious task. Most of my files open up fine, but some of them show up as a blank page thumb nail. They do have ".pdf" extension. Any ideas as to why this is happening, and what I can do to correct the issue?
Ty

@masood131 - A few questions:
Are the pdf files without a thumbnail password protected? (Probably not but just checking since we will not be able to provide a preview for such a file).
If you click on the blank thumbnail to view the individual file page do you see a larger preview image, or is that blank too?
If you refresh the browser page does the thumbnail image show?
If you upload the file a second time do you see a thumbnail image?
If there is a problem with a specific file feel free to share a link with me via a private message and I can investigate further.

Why are my raw files from my Canon 5D Mark III dim in Lightroom 4.3?

I am brand new to Lightroom, still reviewing various basic instruction videos, however I am adept in Photoshop CS5 and CS6. I have been able to import and move a file of jpegs but as I shoot jpeg/raw combo, the raw files were left behind in the original file. I can now bring them up, but they are dim and cannot appear to do anything w/them. I would like to move them to the file where I put the accompanying jpegs, but am having no success in finding an answer on how to do this. Nothing seems to activite to let me do this. Along w/this, I generally tend to work straight from camera raw files, the jpegs are generally not used, thus when LR encourages me to work on the jpegs, I'm not interested. I wish to process my raw files and only move to PS6 if I need to do some more intensive work. Can anyone offer a suggestion?

Here's my guess, based upon your description.
When the RAW photos are "dim", you are in the Import Dialog box, and the default operation of the Import is to not let you import a photo if it has been previously imported.
If that's the case, then you have misunderstood a basic operation of Lightroom. You import your photos once, and from then on, you access them via the Library Module, not the Import dialog. So, go to the Library Module and see if your RAWs are present or not.
Side comment: your workflow seems to be import then move. This is unneccessary, creating two steps for you when one will suffice. When you do the import, you also tell LR the destination where the photos should wind up (it's on the right hand side of the Import dialog box), and LR will do the import and the move in one step.

Why are all jar files not compressed in the JRE installer?

I used 7zip to unpack jre-6u12-windows-i586-p.exe (Oracle JRE Installer). On unpacking, I got a core.zip, a zipper.exe and a few other files.
Again on exploding core.zip I found a few things. core.zip contains all the jar files just like it would be after installation except for 7 jar files.
charsets.jar
deploy.jar
javaws.jar
jsse.jar
localedata.jar
plugin.jar
rt.jar
Instead of these jar files there exists the corresponding packfiles
charsets.pack
deploy.pack
javaws.pack
jsse.pack
localedata.pack
plugin.pack
rt.pack
I think these are files created by pack200.exe & unpack200.exe is run on them after installation to create the corresponding jar files.
So now I have a few questions
Why are only these 7 files run through pack200.exe. I assume its because they are bigger than other files. But it wouldn't take that much effort to pack all jar files & unpack them after installation.
The .pack extension suggests that these are packed but not gzipped. Again why would Oracle not do a gzip also? for eg with rt.jar packing reduces size from 45 MB to 12 MB, while adding gzip also reduces it to 6 MB.
Edited by: 966944 on Oct 22, 2012 8:19 AM

Whatever the truth of all this may be, you won't find it here. This is a user to user forum, not Oracle support or a channel to the developers. All you will get here at best is valid post hoc reasoning: at worst, guesswork. And if you're trying to bring this issue to Oracle's attention, again this isn't the place to do it. Locking the thread.

Why are GarageBand .aif files in trash after session

Hello,
After doing several hours of recording in GarageBand 10.0.2, saving take,1, 2, 3, all different for reference later I close.
In the TRASH there are this
Why are they deleted to the trash and is it ok to EMPTY with out effecting the song?
Thanks
jojoguitar_always learning

You're right!!
I looked for an answer and I found it on Microsoft's site:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/i-keep-getti ng-an-empty-file-in-trash-at-startup/e5760e59-9e5f-4a0a-8766-dac6a73af148
1. Open application Office error reporting, the application is located in this folder
/Library/Application Support/Microsoft/MERP2.0
2. Go in preferences
3. Uncheck enable office error reporting
That did it... Thank you!

HT4796 why are all the files on my external harddrive showing as read only?

I have a harddrive (Seagate) that I have used with my PC to store files. When I plug it into my Mac, all the files are read only. How do I fix that?

Most likely, the drive is formatted NTFS, which OS X can only read natively.
If you don't want to reformat the disk into something you can use on both, try exFAT.
If you want to reformat it only for a Mac, use Mac OS Extended (Journaled).
Either way you'd have to move the files off the drive, format, then reload them
There are several programs which will allow you to write to NTFS, Paragon, Tuxera, and NTFS-3G (free).

Why are my QT file sizes shrinking?

I'm using the copy/paste features of QuickTime to put together four small pieces of my movie into one big piece. I do this by opening up all four QT files and then copying the entire contents of each of the final three QT files and pasting them all, one at a time, end to end, into the first QT file.
Here's the situation: all four pieces are about 300mb each; yet when I save the master file, the result is usually around 300mb.
In other words, there seems to be some data DISAPPEARING in the process. But when I open up the resulting big file, full screen size, and compare it side by side, to the original files, I see no image quality lost. Frame for frame.
I've repeated this process several times. Same result.
How can 3 + 3 + 3 + 3 = 3 ?
Shanked
PS the resulting file plays fine. The only reason I'm posting this "problem" is that I'm having repeated failure trying to upload my movie to IMDb's withoutabox website.
Message was edited by: Shanked

Thanks QuickTimeKirk,
I guess this is a big "duh" for me. I actually had thought I had been toggling that choice all along, because, frankly, it's the ONLY choice that comes up when trying to save. But for whatever reason, the file hadn't been saving that way, as in self-contained.
much obliged for your help!
Shanked

Why are my render files INSIDE my FCE app?!!!

I am really puzzled. I've let this massive video project of animated stills, narration, and sound effects sit for a year. The files got on two machines and when I went to work on it while traveling, it was quite a job to gather it together onto my laptop.
I had some bugs in the narration that just wouldn't mixdown correctly until I manually pulled out some duplicate files that were competing. They would come back as before due to some cache/backup system. I finally rendered the offending sequences until they worked properly.
Now, after I had gotten Episode 1 to the place where I could burn it to a DVD (it is 55 minutes long), I found I had no headroom on the main disc (I started this project on my present laptop seven years ago and I kept using FCE 2 until the project is finished (hopefully, very soon! There are three episodes @ 55 minutes).
This is the home stretch and I want to get it into shape to pass it onto others to modify as needed. When I used Omni Disksweeper to find where I could reduce the files on my main disc, there was a big lump coming from my FCE application! I had to open the database packaging and, lo and behold, there were sequence files right there!!! How can that be?!!!
So, my question, here, is mainly this one:
1. How can I find all the files that FCE is using for this episode of 7 sequences so that I can hand them over with FCE 2.0.3 to those who are going to modify it for other applications at a future date? As you can see above, these files have ended up in the strangest places and I don't have a list that takes me back to all the rendered root files! They are scattered. How do I know which ones to gather and from where?

Well, Tom, this is quite the anomaly, then. I wish I could post a picture of these two files in the actual FCE application package! It is both the Audio & Video Render folders with rendered sequences! Totally bizarre (I could post a picture of it to you). If you open the FCE application, you get the Content folder >MacOS folder>Final Cut Express with the render folders along side of it!
Anyway, I can easily move them out of there to the appropriate folders and then reconnect the media. I will take your advice after exporting the episode into the needed formats and leave the rendered files behind when passing it over to awaiting hands (it will greatly lighten the data load!).
Your advice is to gather the important files and folders which have the underlying media (e.g. scans, sound effects, and narration) and the instructional FCE Project File. Thank you for bringing me back to task! And if you want that snapshot of this bizarre event, I'll send it! Totally baffling...

Why are unwanted vi files produced when building executable?

Similar Messages

Maybe you are looking for