Why do I have 2 Quicktime 7.6.4 plug ins?

When I looked up which internet plug-ins I had, I noticed that there were 2 Quicktime plug-ins. One was labeled Quicktimeplugin.webplugin and the other Quicktimeplugin.plugin. In the Mac HD library folder they are both in the internet lug-in folder. When I get info for both the plugin.plugin was modified yesterday and the webplugin.plugin is alot older, but when I open up there package contents it states they were both modified yesterday when i downloaded the software update. Do I keep them both or do I delete one? And how would I delte one completely/

Yes, you need them both. They have different functions, which is why they have different names.
Best just to leave them be.

Similar Messages

How do i remove tibsearch from my macbook air, i have tried the suggestions of removing plug-ins but i can't seem to get rid of it

Hi, can anyone tell me how to remove tibsearch from my macbook air, i have tried removing the plug-ins as suggested etc, but nothing seems to work.
Thanks

Did you turn off extensions, too? Safari Preferences > Extensions tab

Why are frame sizes increasing after editing with Nik plug-ins?

I’m using the Nik Collection of plug-ins with Aperture, and have discovered that the frame size of the resulting edits always end up larger than the original - sometimes much larger.
The original image starts as 4592 x 3448 but after editing, the longest side of the resulting image is typically over 5000, 6000 or even 7000 pixels.
I recently worked on a cropped image that started at 4138 x 2759 and ended up at 7361 x 4908, after editing with a combination of Dfine, Viveza, Color Efex + Silver Efex. If I export a version during the editing process, and then carry out futher editing, the frame size increases again.
I’m exporting from Aperture using the TIFF - Original Size (16 bit) setting.
Can anyone tell me what’s going on here? I’m concerned that the quality of the images is being compromised by the enlargement.
I'm using the latest set of Nik plug-ins, with Aperture 3.2.4 on a MBP running 10.6.8

Keli
In order to open Aperture in 32-bit mode by default you can right-click on the application icon, select "Get Info" and check the box marked "Open In 32-bit Mode" (or you can continue to run it by default in 64-bit mode and just get forced to re-open the app anytime you need to use plug-ins that can only run in 32-bit mode).
hope this helps!
Raf

Why do I have 2 Quicktimes on my Mac?

I noticed since I upgraded (clean install) to Snow Leopard I have Quicktime 7 and Quicktime 10.
Why?
Thanks.

There is no "Pro" version of QuickTime X so its export options are limited (as compared to QuickTime Player 7.6.3).
QuickTime X includes features (screen recording) not available in QuickTime Player Pro.
Some QuickTime formats are only supported by QuickTime Player 7.6.3 on your Snow Leopard machine.
Use both and enjoy.

Firefox crashes several minutes after opening every time I use it. I think Firefox was updated shortly before this started. Uninstalling and reinstalling have not helped. Updating all plug-ins has also had no effect. Would appreciate help fixing this.

Browser starts out working normally but within a few minutes it freezes, stops responing and I have to close it using Task Manager. When I open Task Manager, it shows two Firefox programs running with different icons even though I only opened one window.

iTunes saves out a new copy of the entire library file every time a change is made to the library. This is not new behavior.
The slowdowns I have seen like this have ususally been caused by:
A virus
or
Some anti-virus software is incorrectly interpreting the rewriting of the file and is causing a problem.
Either way, you should definitely update your anti-virus software and definitions to the latest, and run a full scan of your system. If that does not help, you may want to recreate your iTunes library.

Have tried 3 days to update plug ins. Keep getting error: Plugin Finding Service Error We've encountered an error. Please try your request again later.

I am working with Windows XP, Firefox 3.6.13. I went to Tools, Add-ons, Find Updates. But I cannot get the page to load. All I get is "Plugin Finding Service Error" "We've encountered an error. Please try your request again later." I have tried several times in a day for 3 days.

First of all, thank you for posting about your issue. We are glad to assist you, also Mozilla does care about it's browser even though it is free. Have you seen [[What is plugin-container]] for assistance?

Why did the most recent update set all my plug-ins to Ask to Activate and disable an Adobe one?

Firefox update and none of my plug-ins were working till I went and changed them from Ask to Activate to Always Activate. This Adobe Acrobat NPAPI Plug-in says it needs to be updated but when I try it does not update. It returns to the same need to update screen. There is a problem with your latest update.

I did try to update the plug-in. I would not. I fixed the problem by uninstalling the new firefox and downloading an older version and making sure it didn't install the maintenance program. This keeps it from updating. I even tried the 31 beta firefox and it set all plug-ins to ask to activate. Until you can fix this problem I will remain using the older version that works properly.

Why does my Extras window keeps asking me to reload the Firefox window and not uploading my new plug ins even after I've reloaded it already?

I have installed new versions of my plug ins and reloaded the Firefox page, but I noticed one of them wasn't working (the United States English Spellchecker 5.0.0) so I reinstalled it and rebooted the page once again. But it's not working and no matter how many times I reboot the page, it still asks me to do it. What can I do to solve this problem?
This is the first time it has happened.

This can happen if one of the files that stores details of installed extensions is corrupt. Try deleting those files as shown in the corrupt extension files section of the [[Unable to install add-ons#Corrupt extension files|unable to install add-ons]] article.

Why have my Quicktime Pro funcitions been disabled?

Why have my Quicktime Pro funcitions been disabled? I bought the software a few years ago and use it periodically to assemble image sequences.
Now it opens and only has basic funtions and prompts me to buy the software again...
Not sure what has happend here...

Snow Leopard introduced QuickTime X and it doesn't include any Pro features.
QuickTime Player 7.6.6 installs in the Utilities folder. You enter your registation info under its menu.

Why do I have to conform?

I hope someone here can shed some light on my problem. I'm putting together an assemble edit for CG short that I'm help out on. We're in the process of locking each shot down to the exact frame count - which is where my problem comes in.
The animatics that i'm being given are at 60fps encoded in Cinepak. The final delivery of the project is going to be 720p at 30fps. Whilst we edit the shots I've been putting the 60fps animatics straight into a 30fps sequence and all was going swimmingly until we came to lock down the frame count for each shot.
When I import these animatics in my Bin in Final Cut Pro (I'm using 4.5), FCP seems to think these animatics are at 59.94fps. This is obviously an issue when doing a frame count.
I have one clip that is eactly 66 frames long (I've counted them in QuickTime just to check) but when I bring them on to a sequence at 60fps in FCP, I seem to loose 2 frames as it's only 64 frames long. I tried converting the movie to 30fps and putting it into a 30fps sequence, but when I import that movie FCP seems to think it's at 30.97fps and instead of it being 33 frames long it's 31 frames long.
The only way I can get FCP to recognise the animatic at a correct frame rate is to convert it to 30fps and then use Cinema Tools to conform the frame to 30fps. Then when I import it into my FCP project, it's correctly detected as 30fps and the frames are there.
If I overlay a conformed and unconformed version of this movie in FCP the action doesn't seem to move, I just loose the frames from the end of the shot.
So the questions I have are this...
Why do I have to conform a clip to 30fps when it already is at 30fps for FCP to correctly recognise it's frame rate when QuickTime and Compressor seem to recognise the unconformed version as 30fps just fine?
If I wanted to do a 60fps version how to I conform the framerate when Cinema Tools only can conform upto 30fps?
And finally, why can't FCP just recognise the framerate of a QuickTime movie?
I'm doing this all on a PowerMac G5 Dual 2.7Ghz with 2GB or RAM running Mac OS X 10.4.6.
thanks in advance
Andrew
PowerMac 500GHz G4 DP & PowerBook 1.25GHz G4 Mac OS X (10.4.5)

Hey David,
Thanks for your response, I know the workflow is a little unusual but so is the project.
The reason the animatics are at 60fps is that they are motion captured and that was done at 60fps as they will be later used in a video game. The CG short is essentially a movie using the game assets and as it's 720p, it's 30fps.
I would have probably gone for image sequences too, but I was working with different shots coming from multiple artists and they are using Maya on Windows which doesn't give you much choice output for the PlayBlasts (Animatics), it seem to like AVIs the best.
Being that there was multiple revisions of each shot a day, to keep the files manageable we choose to do the PlayBlasts as Cinepak AVIs.
The edit I was putting together was only ever going to be an assemble edit, so the final frame count for each shot could be determined and then the Maya scenes would be sent to a post house for rendering. The final short would be all the shots in order back to back.
Hopefully that explains the strange workflow, if you have any tips on improving it if I have to do it again - please let me know.
I guess the framerate quirks will really be one of those mysteries!

Why do I have to click on all of my flash components before I can navigate?

Without modification to the code...the component is there but
it needs to be clicked on before I can navigate the site. Should
Dreaweaver not know how to properly insert the code necessary allow
the flash component to view properly? What am I missing? I know
this is a Deramweaver forum....but the problem does not not seem to
be with Flash, it seems to be in the code that Dreamweaver creates
when the Flash component is inserted.
I have been able to find a work around to my problem but
surely it is not what everyone out there is doing. If
so...Dreamweaver or Flash has a serious bug!
I created a site a while back and everthing worked fine. So I
copied some code from that site to fix the new one. However even
after copying the code I still have to modify it to make it
work..(the modifcations are obvious.) This is suely not the way it
is done all the time.
I have three questions:
1. Why did everything work fine with the first site with no
modifications?
2. Why do I have to copy the code to the other site after
inserting the Flash component?
3. Why does dreamweaver not do it for me? (it did everything
right the other time, but now it doen't even work in the previous
site)
I feel like I must have changed a setting somewwhere that I
did not realize would effect this...Perhaps it is a Dreamwweaver
thing.
PLEASE HELP!

It's IE-only behaviour as a result of changes Microsoft made
several
years ago to their browser, regarding how Active Content
(Flash, Quicktime
etc)
is handled, after losing a high profile court case.
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2/CS3, the fix is already
built into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"South Beach" <[email protected]> wrote in
message
news:[email protected]...
> Without modification to the code...the component is
there but it needs to
> be
> clicked on before I can navigate the site. Should
Dreaweaver not know how
> to
> properly insert the code necessary allow the flash
component to view
> properly?
> What am I missing?
>
> I have been able to find a work around to my problem but
surely it is not
> what
> everyone out there is doing. If so...Dreamweaver or
Flash has a serious
> bug!
>
> I created a site a while back and everthing worked fine.
So I copied some
> code from that site to fix the new one. However even
after copying the
> code I
> still have to modify it to make it work..(the
modifcations are obvious.)
> This
> is suely not the way it is done all the time.
>
> I have three questions:
> 1. Why did everything work fine with the first site with
no
> modifications?
> 2. Why do I have to copy the code to the other site
after inserting the
> Flash
> component?
> 3. Why does dreamweaver not do it for me? (it did
everything right the
> other
> time, but now it doen't even work in the previous site)
>
> I feel like I must have changed a setting somewwhere
that I did not
> realize
> would effect this...Perhaps it is a Dreamwweaver thing.
>
> PLEASE HELP!
>

HT2376 Why do we have to buy a new key every year? Why can't we just buy a key for three to 5 years at a time?

Just inquiring as I just want to know why can't we buy QuickTime Pro registery keys for three to five years in one purchase?

Just inquiring as I just want to know why can't we buy QuickTime Pro registery keys for three to five years in one purchase?
How are you being forced to purchase a ney key every year? Keys should only need to be re-purchased after a major upgrade—e.g., the change from QT 6 to QT 7 on a Mac. Since QT 7 was released in 2005 for both the Mac and Windows platforms, your QT 7 key should have been valid for a max of about 8 years thus far. The only problem I know of is the fact that Apple no longer maintains a continuous history of QT 7 key purchases which has been forcing users who do not maintain a copy of their key and user ID on hand for things like drive/system failures and/or accidental deletions to purchase a replacement rather than simply re-keying their QT 7 app with their old key. I keep all of my old keys stored on thee separate USB drives, two RAID units, and one external hard drive in case I lose any or all of my startup volumes.

Why do I have jerky playback on quick time?

Why do I have jerky playback on quicktime?

Go to Start and type netplwiz in the Start Search and hit Enter. The User Accountsdialogue box will be displayed as shown in following screenshot.
Now uncheck Users must a enter username and password to use this computer option and press OK. Thats all, now reboot your system and you will never see the login window any more
Refer the following weblink to adjust the time for monitor to stay longer:
http://windows.microsoft.com/en-IN/windows7/products/features/power-management
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders. What else can i do? Please help:(

My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(

Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all

How can i fix my iphone i can't update or download apps, when i try it tells me toput my credit card info and i do but when i push done it tells me my payment has been declined, but why do i have to pay to update or download free apps. How can i fix this?

how can i fix my iphone i can't update or download apps, when i try it tells me toput my credit card info and i do but when i push done it tells me my payment has been declined, but why do i have to pay to update or download free apps. How can i fix this?

You must contact iTunes support to get the problem resolved.
http://www.apple.com/support/itunes/contact/
If there is a problem with your account or payment info, you cannot
download anything (including free apps or updates) until the matter
is resolved.
In countries where the iTunes Store only sells apps, the accepted payment methods are Visa, MasterCard, and American Express. Other payment types such as gift cards, store credit, monthly allowances, ClickandBuy, and PayPal are not accepted. Depending on your App Store country, prices may be listed in your local currency, US Dollars, or Euros. http://support.apple.com/kb/HT5552

Why do I have 2 Quicktime 7.6.4 plug ins?

Similar Messages

Maybe you are looking for