Why do I have a double set of icons on top right after install?

After downloading and installing beta 4 i get double icons on top. I removed them by customizing but now when I open new tabs I dont have any way to close them as in no little x.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Similar Messages

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • TS3293 I have to double click the icons

    I have to double click my icons for them to open. How to I go back to just touching them once?

    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.  What should I do

    I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
    What should I do?

    Hi Anto2211,
    Please follow the thread: Black screen CC where this issue is already discussed and resolved.
    Let me know for any further query.
    Thanks,
    Ratandeep Arora

  • I have a very slow startup for a macbook pro after installing Maverick

    I have a very slow startup for a macbook pro after installing Maverick

    Try SMC and NVRAM resets:
    http://support.apple.com/en-us/HT201295
    http://support.apple.com/en-us/HT204063
    Then try a safe boot again:
    http://support.apple.com/en-us/HT201262
    Ciao.

  • Why do I have to double-tap my messages to get them to open??

    When checking my email, I have to double-tap each message to get it to open. WHY?? Just started doing this today!!

    Thanks! Problem solved. I've had an iPhone for two years and never noticed that feature of iOS. Somehow, my son must have stumbled on it.
    Apple, if you're peeking in on this, please put someone to work on making that feature more useful. There is no (obvious) way to scroll menus! Also, you should add a Voice Over command to disable that mode.

  • My iphone 4s is dictatating everything. I can no longer scroll through the phone. I have to double click all icons How do I turn this off?

    My iphone 4s is dictating everything. I can't scroll through the phone. I have to double click on everything. How do I turn this off?

    With Voice Over, you highlight whatever you are trying to select and then double tap anywhere on the screen to select.
    So for your password of 1234 you have to
    "Highlight 1, then double tap the screen, Highlight 2, the double tap the screen,... etc."
    In order to remove you have 2 options:
    Option# 1 – Turn off Voice Over
    Go to setting by, highlight "SETTING
    Double tap screen to go into settings
    Use 3 fingers to (swipe) scroll of down and highlight "GENERAL"
    Double tap screen to go into general
    Use 3 fingers to (swipe) scroll of down and then highlight “ACCESSIBILITY”
    Double tap screen to go into accessibility
    Once you are in make sure that EVERYTHING in that section are shown as “OFF”
    Option #2 - Reset your Phone
    Go to setting by, highlight "SETTING
    Double tap screen to go into settings
    Use 3 fingers to (swipe) scroll of down and highlight "GENERAL"
    Double tap screen to go into general
    Use 3 fingers to (swipe) scroll of down and then highlight “RESET”
    Double tap screen to go into reset
    Select “Reset all setting” and continue to follow the instruction
    (When you reset, all of your data and music WILL NOT erase. So don’t worry about that)
    Hope this helps.
    - Hugo

  • They have a symbol that is on the top right hand corner and don't know what it is for .. It's a little lock with a circle around it.. Can u help me please???

    I have a symbol on the top right hand corner and don't know what it is!! It's a little lock with a circle around it??  Help please???

    It's Orientation Lock, which will kee the screen from rotating when you rotate the device.
    It's accessible from Command Center- swipe up from the bottom of the screen.  You should see the icon to turn Orientation Lock on or off.

  • Why would Dreamweaver CS5 become inaccessible on a Vista 64/SP2 system after install and reboot?

    Here's the scenario:
    1) I install a purchased, valid Dreamweaver CS5 instance on a machine running Vista 64/SP2
    2) The installation goes perfectly -- no errors or warnings whatever.  The proper startup menu items are created
    3) I successfully launch Dreamweaver after install -- it works perfectly
    4) I reboot
    5) I try to re-launch DW
    6) I get a bizzare system message saying 'Windows cannot access the specified device, path or file.'
    Note that my virus checker is Avast, and I cannot see that it has touched any of the Dreamweaver files, and further note that every other of the dozens of applications i have installed have installed and run perfectly.
    What the heck is going on with Adobe Dreamweaver (Which, by the way, installed perfectly on another machine using this exact, same OS image -- i upgraded my hardware a while back)

    I'm surprised you've never experienced this with other software installations.  It's so typical of Windows' annoying UAC introduced in Vista. The first time you run software after reboot, you have to right click to run with admin level permission status so you can write to and save files on your HD which are necessary for the software to run on your system.   Afterwards, Windows remembers and usually permits you to start the software normally.
    Nancy O.

  • Why does my IPhone 4 transfer  messages from Inbox to Trash right after downloading them?

    Why does my IPhone 4 transfer messages from the Inbox to Trash right after downloading them?

    if it was iMessage, you wouldn't be charged, because they don't send as sms.  I would contact your carrier, because this is a weird issue that is most likely happening from their end

  • My pfd files once downloaded doesn't have an 'open in..' at top right corner.  Just an arrow that, once clicked, have a print option.  I cannot get it to ibooks.  Please help!

    I am trying to download a pdf file from my email into iBooks with the new iPad 3.  The problem is that in top right corner, it does not say "open in..".  Instead, it just has an arrow that only gives a print option.  What's wrong?

    Hi jscher200,
    Thank you for your reply, sorry for the VERY late late response, but I have just figured out how to control this separate 'panel'. I find it really useful for monitoring Google Analytics in as it can just sit there running. It does have its limitations, as it's a limited size (you can't expand it to full screen view), so you can only ever see a vertical section of a website and need to scroll to look to the right or left, but I have the live view of people accessing my website running on there and if the numbers start racking up at any time, I can scroll to look and see what pages they are accessing, where they've been referred from, etc.
    To get it to work, you save a website address in the Bookmarks Toolbar and when you can see it sitting on the toolbar at the top of the screen with its little icon, right click on it then click 'properties', then tick the box 'Load this bookmark in the sidebar'. The next time you click on this bookmark to open the website, it will load in this sidebar, which looks like a separate 'window' but is immovable. You can only have one sidebar application running at a time, but can change it by right clicking on the bookmark you want to load in there and it will then change to that one next time you click on that bookmark.
    I hope this might be useful to others, as I asked for help with this on loads of forums and not one person knew that this existed - even really skilled techies!

  • I cannot unlock my screen so that the orientation changes, there is a padlock icon at top right..How do I change the orientation or unlock the current screen setting?

    If anyone can help me unlock the orientation of my screen..... the padlock icon is displayed in top right of screen but I do not know how to turn if off to change the orientation.
    thanks.

    Double-click the Home button and swipe the Task Bar at the bottom to the right. Make sure the Rotation Lock on the far left is not enabled.

  • HT1711 why do I have to double click everything now in itunes?

    Hello everyone,
    I'm not an expert on the Itunes program so this could be a dumb question, but I'll try to explain this in clear detail and be as brief as possible.
    Earlier versions of Itunes did not have this feature or issue, so it was when I updated last year that this became an annoyance. Everytime I click one of my songs to change something like artist, title, rating, etc the entire program will highlight in grey, then I need to double click to get into the tab to add or delete file name stuff. Why is this? The older versions of Itunes I never had to double click out of this grey highlighted box to get into changing text. Maybe it sounds like a dumb reason to be frustrated but most of the songs I listen to are in Japanese so I need to translate them and add the English names, bands, and proper song titles and it drives me crazy you need to double or even triple click on anything to get into it now.
    Thanks!

    You must have VoiceOver on.  You have to go to Settings>General>Accessibility>VoiceOver to turn it off.  However, with VoiceOver on you have to flick the screen with three fingers to scroll.  Also you have to tap an item on the screen once to select it, then tap again twice to activate it.  (Example:  To open Settings, tap Settings once to select it, then double-tap Settings to open it.)

  • Why Did I Have to Re-Set My Parameter RAM

    Today while using Airport wireless, for an unknown reason my connection was terminated even tho my Airport wireless continued to work (self assigned IP address).
    I have also a D**l laptop which continued to receive my wireless router and was not affected whatsoever.
    With assistance from Apple phone tech, I was able to once again to connect to my wireless router and rejoin the internet.....after re-setting the 'parameter ram'.
    What would be typical (if any) causes of this problem (or others) which would require re-set of the parameter ram?

    Pram is a cache of several system environment variables. It's function can be similar to a bios chip on a PC motherboard and it can speedup boot times.
    Apple discusses it here: http://support.apple.com/kb/HT1242
    Now that article says that network information is not stored in the Pram, but there's always a chance that the Pram data can become corrupted by a kernel panic, power outage or other surprise. This corruption could interfere with other devices on a system.
    I Zap the Pram on machines that seem to be having problems finding their boot drives or other strange startup/hardware problems.
    I don't think I would have thought of it for a wireless problem, but why not? It's painless and fixes a slew of issues.

  • HT5295 Why do i have to keep setting x2 speed for each podcast that i listen to?

    When I play podcasts through the Music app, I can set x2 speed and it stays selected for all podcasts that I play.  Here, it seems that I have to flip up the settings page and set x2 for each podcast I play.  Why won't this setting persist across plays?

    What do you mean by the settings page? The sped selector is on the Now Playing screen.
    I understant this When I play podcasts through the Music app, I can set x2 speed and it stays selected for all podcasts that I play. However, what  is here in "Here, it seems".

Maybe you are looking for

  • Difference between Idoc ACC_INVOICE_RECEIPT03 & INVOIC

    Hi I am a total FI ignorant (I know SD so I can answer questions there!); I was asked to think of an interface that posts AP invoices. Some invoices have a purchase order (and we need to finish the MM flow) so the interface can use Idoc INVOIC01/02 I

  • Transfer GL Accounts to a new SAP System

    I need to transfer G/L accounts to a new SAP system. I am trying to use Data Transfer Workbench. I need to know do we create it in the Company Code from where I have to move the GL master data or in the target system. One more question, after Extract

  • AirPort problem

    I use ethernet for my internet connection. A friend came over to my place with his laptop and wanted internet. I used my iMac G5 ALS to share my connection through my AirPort card. It worked well. A different friend came over and wanted me to share m

  • Seam (EJB3/JSF) App Deploys - but tables are not created, populated

    Please let me know if you've run across this or have an inkling of an idea of what is going on here. Description: I have created the JDBC Data Source and this deploys successfully. The JNDI Name for this data source is: "seam-jee5-ds". I am using thi

  • BW DSO DB Partitions can be used in HANA Non-active data concept?

    Hello, In BW we can do the DB partitioning of the Standard DSOs based on the time characteristic (0calmonth or 0fiscper). Will these partitions be considered for the early unload based on the usage pattern in HANA Non-active data concept (Early unloa