Why do I have to change printer settings when using Photoshop tiff?

I'm creating a tithe envolope for my church. The text portions were created in the psd using the text tool of course. But, for our church logo, I used a 300 dip tiff, scaled and positioned it at the top left part of the layout. This is all being done inside a life-size area using guide lines to simulate the edges of the envelope. Then I save the entire thing out from Photosop as a tiff. I created a MS Word doc and used Insert>Picture to place the tiff at a place in the Word doc that puts it in the right location when envelopes are loaded into the laserjet printer.
Here's the glitch. If I let the Word doc print at it's default resolution of 300 dpi, the church logo shows up looking very ragged/pixelated. Only by going through the hassle of resetting the printer properties each time to 600 dpi do I get a smooth, clean output. What's going on?

Sounds like an issue with the print driver not retaining previous settings to me.
Keep in mind that printer settings are saved with some kinds of documents (e.g., PSD files). I'm not sure if that's the case with a TIFF, but if so, make sure you save the TIFF file after you print so the settings will be available next time you print it.
There is a known issue with some drivers where you have to go through a few extra steps to get them to retain the settings you make in the Photoshop dialog, but I don't see how that might apply here. To see if it does, do the following:
File - Print.
In the Photoshop print dialog, make whatever settings you like.
Click the [ Print Settings... ] Button, and exit the print driver dialog with [ OK ].
Click [ Print ].
Save and Close your document.
Open the document again.
File - Print.
Click the [ Print Settings... ] button.
Is your dpi preference remembered?
-Noel

Similar Messages

When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm usi

When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm using a Mac with Mountain Lion OS. Any solutions?

Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN

Effect of Adobe "print" settings when using PDF-Maker or printing to PDF

I have accidentally found that the fonts and ('microscopic') visual appearance of a document can change depending upon the setting of the option "Rely on system fonts only; do not use document fonts" which is accessed under Print > Properties > Adobe PDF Settings from within MS Word (2003). [Acrobat 9.1.0 Pro (trial)].
I had initially thought this was a difference between the print-to-PDF route, and the PDF-Maker route. There may be a difference, but the more important effect is the settings on the PDF printer, which you might not think to set if using the PDF-Maker. That is, the settings of the PDF printer affect the result of using the PDF-Maker.
Apparently it doesn't matter whether 'system fonts' are embedded in the document or not (for this example).
Examples follow.
—DIV
P.S. See my initial query at http://forums.adobe.com/thread/419516.

I am struggling a bit to make sense out of all the files, but a general comment on the process is this. PDF Maker is basically a preprocessor for the Adobe PDF printer. The settings in the PDF Maker preferences can override the settings in the printer. What PDF Maker does is to basically create PDF Marks in the PS file that the printer creates to allow for Distiller to create bookmarks and such. For a comparison, you need to see which job settings are used in each and the options that each job settings uses. Including the system fonts in the PS does not make any difference except to make the PS file smaller. The system will go get the fonts at the time that Distiller creates the PDF (at least that is supposed to be the process). The job settings file will make a difference about whether a font will be embedded or not. As I recall, there were different fonts embedded and used in various versions of your PDFs. The fonts can be viewed with the font tab of the document properties.
This does not answer the questions, but may give you some idea about the process and what to look for as you create these files. It may be that different job settings are used and such, causing a comparison of apples and oranges. I don't have time to look further now, but that might give you some things to consider. (I may not have helped much here since my comments are apparently similar to what I said in the other post).

HT5624 Why do I have to change my password when I've only just done one to set up my Apple ipad?

I've just set up my ipad account and am now being asked to change my password - why? Seems nuts and no explanation given

This is not normal. There may be an issue with your Account.
Suggest you Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Why do I have to change my plan when I switch my device?

My IPhone 4s isn't working at all and I was told I could temporarily switch to another device. I am switching to a basic phone. When I proceed online to switch the device, it tells me I have to switch plans as well. I don't need more data, but I do not want to go down in data.

mrhelper wrote:
I assume you have unlimited data? Unlimited data was never an option for basic phones so that's probably the reason.
Actually basic phones did have an option for an unlimited data plan at one time. Not any more though.

Qosmio F60 - Change screen settings when using DVD player

When I try to play DVD using BD DVD Player a message appears that tell me to change the screen setting I have followed their instruction to no availo. I am running Windows 7. The DVD plays on windows media ok.
Any help would be appreciated

Hi ametec,
Was this BD DVD player preinstalled on your computer?
Which message you getting exactly? Maybe you can upload a screenshot or something else
In my opinion this problem is only related to this DVD player because on Media Player everything works
For example I use VLC media player for all my audio and video files. Its a small freeware player that can play the most audio and video files. Furthermore its not necessary to use a special DVD player software.

Why do I have to specify a rate when using an external Sample Clock?

Set the approximate Rate of the external clock. This allows the internal characteristics of the acquisition to be as efficient as possible.
How to understand?
帖子被sillyball在02-25-2007 01:48 AM时编辑过了

I think it is for optimization of the buffer.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Lack of print options when using photoshop elements 10 i.e. paper type

When printing from Photoshop Elements 10 on my MacBook Pro (File Print) there is no where to select paper type or print quality or there doesn't appear to be unlike when selecting print from iphoto. What have I missed? as there must be a way!

From the Print dialogue box click on the Show Details box at the bottom.

Can I adjust print settings when I use AirPrint?

Hi
I have a MFC-J430W Brother printer set up for Airprint.
When I use Airprint on my ipads or iphones it always comes out in color.
Is there a way to adjust my print settings when using my mobile devices?
I wasn't sure where to place this question. Since the printer is connected to my iMac I am parking it here.
Brother support is underwhelming. But I've noticed the same limitation with other brand Airprint printers.
Thanks

Printing from an iOS device does not give you controls for the print, all you can do is send something to the AirPrint printer. AirPrint is a pretty fundamental level print system.

Why has my Photo Stream stopped working? I have not changed any settings.

Why has my Photo Stream stopped working? I have not changed any settings on either my iPhone or my Mac. I did try to reset them, but with no success.

FAQs and trouble shooting tips are here - http://www.apple.com/support/icloud/photo-stream/
Other than that we need more details to possibley help including what "doesn't work", how you tried to restart, any thing else remembering that we can not see your or yoru computer so depend on what you tell us
LN

Photoshop CS6 freezes with attempts to change printer settings

(This problem also occurs with InDesign CS6, so I will post to that forum as well. First one to give me a solution gets my undying love and devotion appreciation.)
My employer acquired a Canon 6010 printer with a Fiery print controller last year. I have no problems printing from my personal Windows laptop.
However, from my employer's iMac (OS X 10.6.8) I get the spinning beach ball of death at least 90% of the time that I open an existing document and attempt to change the printer settings. The only way out is via Force Quit. Inexplicably I can occasionally succeed in changing printer settings. I think the record was having to force quit the application 11 times. Not sure - I quit counting.
So far our only semi-consistent work around: create a new document and copy and paste the contents from the existing document. Not cool. But sometimes the app freezes with brand new documents, thus destroying my work around anyway.
Additional Information:
I have installed all CS6 upgrades.
Our technical support contractor recreated the problem and could not find any solution other than the work around.
Canon says the problem is with the applications.
This happens whether I attempt to change the printer settings immediately or make changes to the document first.
It does not matter what other applications are running.
Rebooting the system after the app freezes does not make it work.
We cannot upgrade past 10.6.8 because of the age of the hardware. But CS6 is supposed to run on Snow Leopard.
I have tested this with other applications, including some older Adobe software. It does not happen with Microsoft Word, Microsoft Excel, InDesign CS3, Photoshop CS3, Acrobat 8 Pro, Acrobat 9 Pro or Acrobat XI Pro.
This happens whether the documents were created and saved on the Mac or on a Windows computer.
Re-saving the documents and/or printer settings does not change the outcome. Once I restart the application Photoshop may remember the paper size, but doesn't remember duplex settings. (From another thread in this forum I suspect a corrupt printer preferences file.)
Per the instructions in the other thread I reset the printing preferences by launching the app while holding down shift-control-command. That enabled me to change the printer settings one time. Every subsequent attempt brought back the spinning beach ball.
No other employees report similar problems (including a few MacBook users). However, they do not use Photoshop or InDesign, nor do they typically change printer settings.
Sorry if some of that is irrelevant - just trying to give you as much info as possible and tell you what I've tried already. Any suggestions?
Thanks,
Bonnie

Nanneri, my situation is similar in that creating the PDF and printing from that does take longer than just printing from InDesign and Photoshop.
I finally got a Canon tech rep on site who understood my problem. Though we had tried reinstalling the drivers (as had previous Canon reps), this guy got it right. Neither Photoshop nor InDesign has locked up since - at least not for the Canon 6010. (Photoshop has locked up twice when I've attempted to print to a Canon iPF8300s wideformat that isn't on the Fiery. Restarting PS has fixed that.)
Based on my experience, I would start with new drivers.
FYI: I am having problems printing to a new Canon C7065 that also uses Fiery. But the problems vary and I haven't isolated the factors. Sometimes I get a printed error report. Sometimes it just doesn't print. But no more software lockups.
In our case, I suspected our problems were related to having old hardware that can't be upgraded past OS X 10.6.8, which is the oldest OS compatible with both CS6 and the Fiery. But since you are on a newer OS, and a different printer, I'm beginning to wonder about the Fiery.
Hope you find a solution soon. Keep us posted!

Any printer UI for change printer settings?

Since Solaris 10's printing system is powered by PPD files. (at least for some printers). I suppose I can access all features PPD file provide: Change page size, input-tray, output-tray, color-mode, etc.
Is there a GUI that comes with Solaris that can help me change printer settings? (The printer manager is useless)
How do I tell what command line option a PPD file provides? (Yes, I can write my own script to parse the PPD file for OpenUI, CloseUI), but what's Sun's solution for it?

/usr/sadm/admin/bin/printmgr &
Don't ask me why it's in a weird location.
It's the Best GUI In The World -
gives you the option of a console
window, so you can see what it's
doing on the command-line in
response to your button-clicks.
Dunno about the PPDs.
cheers.

Changing printer settings no longer works - requesting lpadmin password!

When pressing the _"Pause Printer"_ button, or changing printer settings, I get a dialog box come up saying:
*Type the name and password of a user in the "lpadmin" group to allow Photosmart C4500 series (HPF615EE).app to make changes.*
I have typed my username and password in several times, to no avail. I am the only administrator on this computer. Apparently I am not a member of this "lpadmin" group, and have never seen it before in my life!
What do I do?
(? Possibly since upgrading to 10.5.7 ?)

I am having the same problem. When I use the fix posted by John Blanchard, I "A Directory Service error occured"
My output of the "dscl" command is a little different
AppleMetaNodeLocation: /Local/Default
GeneratedUID: ABCDEFAB-CDEF-ABCD-EFAB-CDEF00000062
GroupMembership: Guest1
Password: *
PrimaryGroupID: 98
RealName:
Print Administrators
RecordName: _lpadmin lpadmin
RecordType: dsRecTypeStandard:Groups
So what changes do I need to make to John's terminal commands to fix my problem.
Thanks.
Len

Change print settings for email sent directly to the officejet pro 8630 printer

HP Officejet Pro 8630 All-in-One
Trying to change settings for printing an email directly to the printer.
Email prints in color on separate pages, want black & white with two-sided.

Hi @George1978,
Welcome to the HP Support Forums. I gather that you would like to learn how to change the print settings when sending an email to print on your Officejet Pro 8630 printer.
To better assist you, would you please supply some additional information:
How are you sending the print job to the printer? Are you sending it from your computer and choosing Print, from one of HP’s mobile apps, are you forwarding the email to the printer’s ePrint email address, or another method?
What operating system are you using on the device you are using to send the print job? I have included wikiHow’s guide titled How to Figure out Your Mobile Operating System if you are using a mobile device. If you are using a computer, please click on http://whatsmyos.com/ as it will tell you what your operating system is.
How is the printer connected (USB cable, ethernet, or wireless)?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I have an Iphone 4s from my work. Until 2 days ago, my iphone would notify me when I got an email or text. Now it does not notify me at all and some times it does not ring at all either. I have not changed any settings at all.

My iphone just randomly stopped notifying me when I got an email, text or voicemail. Sometimes it will not even ring. I confirmed that the volume is turned on and I have not changed any settings at all. My software is up to date. In my job I need to know when I get an email without having to constantly activate the screen or open the email icon.
Does anyone have any suggestions to fix this problem?

First, is the Mute switch activated?
Mute switch is above the volume buttons on the left side of iPhone.
If you see red/orange color the the mute is ON.
Also check Settings > Sounds > for New mail, Text Tone, etc.. have sound entries?
If that's not the case try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Why do I have to change printer settings when using Photoshop tiff?

Similar Messages

Maybe you are looking for