Why do the thumbnails not reflect changes I make to pages?

I am working on a pdf in Acrobat DC.
I am working on a page with all the layers hidden.
So the thumbnail is blank
When I show a layer it appears on the page.
The thumbnail however does not change.
Why do the thumbnails not reflect changes I make to pages?

Hi Jules,
The behavior is same in Acrobat 11 as well. The thumbnails do not get refreshed till you close the document and reopen.
Regards,
Rave

Similar Messages

Why is the bounce not reflecting volume changes in my bass track?

I am running Logic Pro 9.1.7. I have input a bass guitar directly through an Apogee Maestro 2 using the direct input setting. When I use the mixer, all of the functions seem to work fine on the bass track (fader, volume, plun-ins, etc), but when I bounce the track the volume of the bass is still at the original input setting even though it was materially reduced (-15 db or more) in the mix. All of the other settings in the mixer (fader, plug-ins, etc) appear to be properly reflected in the bounce. Only the volume reduction seems to be missing After some experimenting it seems that the bounce may reflect an increase in volume in the mixer over the original bass guitar input, but it is hard to be sure because Logic only permits a 6db increase in volume and the bounce is being played through iTunes, so subtle differences are hard to detect. But even a -50db reduction in the bass mix produces a lound and clear bass in the bounce at the original input level.. This problem is not present for any track that was input through a microphone.
I have searched in vain for an explanation. Software glitch? Some parameter not set right? Any suggestions greatfully welcomed.

The latter. I just recorded a bass track as an audio track along with tracks for guitar, banjo, harmonica, etc. (I bounce off line so playing along with the bounce is not possible.) The thing is that the other instruments I play are all acoustic, so they go on their tracks through a mic. The bass is an electric bass guitar, and while I have an amp and could mic it, it just seemed easier to put it on a track by plugging it right into the preamp, which has an "instrument" input setting as an alternative to the "microphone" input setting.
What is so screwy about this is that the normalize function in the bounce window should make proportionate adjustments to all instruments. At least that's what the owner's manual says it does. But what it seemed to be doing is treating the directly input bass and the microphoned instruments seperately. I usually record the bass track at a fairly high input so that I can clearly hear it in the headphones as I play over the previously recorded instruments and vocals. Then I rely on the mixer to bring down the volume of the bass to a more reasonable level in the final mix. But with the normalize function on in the bounce, the bass was still coming through in the bounce at the original input level or something very close to it. That would be fine if the other instruments were properly jacked up as well so that the bounce sound like what I heard through the mixing board, only louder. But what I got was a mix with all of the all the other miced instruments sounding just like they did through the mixing board and the bass blasting away at the original recorded level notfwithstanding the volume reduction on the mixing board. Very strange. I assume this is a software bug, but now at least I have a reasonable work around. Thanks again.

Why is the Counter Not Showing on my Blog Front Page?

Anyone know why me blog is not showing on my blog's main page:
http://web.me.com/quathletics/QuinnipiacMidnight_Madness_2009/2009_Quinnipiac_Midnight_Madness/2009_Quinnipiac_MidnightMadness.html
I can see it in iWeb, but after publishing site, it does not show?
Any suggestions.
Thx Much

OT,
Thx Much.
Did all you suggested with the footer and still no counter visible:
http://web.me.com/quathletics/QuinnipiacMidnight_Madness_2009/2009_Quinnipiac_Midnight_Madness/2009_Quinnipiac_MidnightMadness.html
Had similar issues with another iWeb blog...something is not right with this and any help would be appreciated.

Why are the templates not in english? how do i change it

why are the templates not in english? how do i change it

dfields77 wrote:
why are the templates not in english?
To learn about this standard practice for template text, google "lorem ipsum".

I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?

I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

Why are the iPhotos not listed in the finder?

why are the iPhotos not listed in the finder?

There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Why are my thumbnails not matching photos?

Why are my thumbnails not matching the photos in my smart album?

I am rebuilding my thumbnails--a slow process I am learning. We'll see how that does. I believe I have the latest version of both iPhoto and OS. What happens is that the thumbnail does not match the photo. The photo in the thumbnail is in the same series, but not the same. Many of the thumbnails are the same photo from the series. I'll report back on the success of the thumbnail rebuilding process.

Why is the map not displaying correctly on "find my phone" I am getting large grid squares on the map

why is the map not displaying correctly on "find my phone" on my computer. I am getting large grid squares on the map. I have tried deleting my history, tried zooming in & out, but the grid squares won't go away..

Welcome to Apple Support Communities
It means that it is not connected to the Internet, so it may be turned off. Another option would be that somebody has resetted it to default settings and has changed the Apple ID, being impossible to track your son's iPhone. Anyway, report it to the police because it is the only thing you can do at the moment

Why does the "Computer Name" sometimes change?

                Not a big deal, just curious, why does the "computer name" sometimes change?
                 The name will be the same, but it will add a number....2,3,4...I always change it back so it doesn't have a numeric value next to it, but just wondering why it happens.
                                        Thanks.

Can also occur after your computer is put to sleep and then wakes back up or after your computer is force quit and immediately restarted. Sometimes the router 'believes' the computer is still connected when it actually isn't. When that computer re-establishes a connection the router 'tells' the computer that a computer with that name already exists so it has to change its name. By default a computer running MacOS adds a number (or increments its number) when this happens.

Why does the Date Created metadata change when images are exported?How do I stop it from changing?

why does the Date Created metadata change when images are exported? How do I stop it from changing? I must have a prefernce set up wrong.

I don't know what OS you are using, or what application you are using to view the data about your exported files, but on Windows and using Windows Explorer the "Date Created" field relates only to the date that the exported file was created, i.e. if viewed immediately after export it will show the date created as being the same date. In order to view "Capture Date" in something like Explorer, you first have to ensure you have included the Metadata as Conrad outlined above, then you have to adjust the display properties of Explorer to show the "Date Taken" field. Here is an example, part of a folder I exported back on March 3rd, note the difference between that last two dates:

When I updated to the latest IOS last night, why did the photo events date change?

When I updated to the latest IOS last night, why did the photo events date change?

The problem is that the Add-ons Manager tab when opened the first time, is on "Get Add-ons" section and that must be downloaded from the Add-ons server which might be overburdened.
* If you need to look for new Add-ons, go directly to the Add-ons site -> https://addons.mozilla.org/en-US/firefox/
Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Add-ons are disabled after updating Firefox#w_check-for-new-versions-of-your-add-ons|Check for New versions of your Add-ons]]
Check and tell if its working.
Not related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Why is the app not available for my device?

I've no problem using BT wifi on my device (Nook BNTV400) so why is the app not available for that device? It's not like the nook is proprietory, everything else I've tried to find in the play store works fine.
Is the apk available for download direct from bt?

if you can connect to btwifi without the app then I wouldn't bother trying to find the apk file
if you have an android smartphone then you can download the app and get the apk file to sideload on to your nook
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Why is the text not the visible in the protected PDF opened on Mac?

Long story short:
I've created a document in Microsoft Word 2010 and saved it as PDF. With the .pdf open now in Acrobat Reader 9.4.1 I have enabled the protection over the .pdf file by only allowing Printing and saved the protected .pdf. All of these actions are made on Windows 7 machine. Now when trying to open the protected .pdf on Mac (with Snow Leopard 10.6.6 and Preview) the .pdf opened only shows the lines and bullets but not the text.
Why is the text not visible in the protected PDF opened on Mac?
(is this bug or a "feature"?)
Note: the protected .pdf looks good on Windows 7 and it works on Mac if the .pdf has no protection.
Thanks!

A. What application are you using to add the protection? Reader cannot add any file security and I don't think the PDF feature of Word will either.
B. Mac Preview has issues with PDF standards so there may be some features that you will experience issues with that have no workarounds.
C. Have you checked the file after adding security to see if all fonts are embedded?

Why is the template not being used when dynamic page called ?

Hi,
I have created a dynamic page and assigned a template to it. When I call the dynamic page using the 'show' procedure from a form, I do not see the template.
Why is the template not being used ? How can I get the template working when I call the dynamic page ?
I even tried to show the page from the dynamic page's manage components tab and there is same problem. Template is not being used.
thanks,
Mainak

You can alter the generated package body to include the following function in the header and footer sections.
Header:
PORTAL.wwv_headings.show_header(
p_template => 'PUBLIC.TEMPLATE_3',
p_heading => 'Dynamic Page',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help',
p_about_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.about');
Footer:
PORTAL.wwv_headings.show_footer(
p_template => 'PUBLIC.TEMPLATE_3',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help');
where
<PORTAL_DEMO> indicates application schema
<PORTAL> indicates the name of the portal (normally this will be portal30 by default).

Why does the charger not charge my battery? I just bought and installed a new battery from Apple (direct) today

Why does the charger not charge my battery? I just bought and installed a new battery from Apple (direct) today

yes, the charger was working before.
so far i have:
1. updated my software
2. updated to battery 1.2
3. took off the "duck" plug and used the macbook pro cord that was provided
4. checked and cleaned the pins on the magsafe
5. checked and cleaned the magsafe port
any ideas? i appreciate your response!

Why do the thumbnails not reflect changes I make to pages?

Similar Messages

Maybe you are looking for