Why does the image go blurry when I export my file to jpeg from Illustrator CS6?

Hi,
I have created an image on illusrator CS6 and am ready to save it.
I have saved it as a pdf format and the image stays as a sharp vector image and not blurry at all.
But I also want to keep the image as a jpeg. So when I go to export the image from illustrator CS6 as a jpeg, the end result comes out blurry and not sharp anymore, but more jagged on the edges of the image.
Is there anything I can do to keep my file as a jpeg with it staying as a sharp crisp image?

The image above is a screenshot of the ai.file
Above - second image is the screenshot of my export settings
the 3rd image above is a close up zoomed in part of the image - the edges are jagged and blurry

Similar Messages

My images look blurry when I export or publish my site from Muse. Why and how do I fix it?

My images look blurry, jagged, pixelated and low quality when I publish or export my site from Muse. Is there any way to avoid or fix this problem?

The primary cause of blurring images is the less than Photoshop-quality image downsampling algorithm currently used in Muse (that was compounded in early betas due to a bug in the JPEG compression library we were using at that time). Due to work we've done for Beta 7 to improve image encoding performance we now have the infrastructure in place to enable us to take a much better image resampler/resizer (after Beta 7), so this source of blurring will be addressed.
The other source of blurring is unique to opaque images containing line art or otherwise containing hard edges and large areas of solid color. When an image is opaque Muse will encode it as JPEG (if it's altered in Muse is a way that requires re-encoding). For line art this will introduce JPEG compression artifacts that can be noticeable depending on your eye and the specific image involved.
There are (at least) to ways to avoid these JPEG compression artifacts:
Resize your image before placing and avoid applying any effects (rounded corners, drop shadow, etc.) or doing any cropping or resizing in Muse. If the image is unaltered your original JPEG, PNG or GIF will be passed through unaltered.*
Put at least one pixel of transparency in your original image. (It could be a single 99% opaque pixel.) This will force Muse to encode as PNG. PNG compression is lossless and thus doesn't introduce any compression artifacts. However, an average PNG can be 5 times the size of a JPEG for the same image, so there is an impact to webpage download performance.
*For PSD files Muse has to encode the original PSD data into some web-friendly image format. If an image is resized in Photoshop and placed Muse won't resize/resample the image data, but it will encode it as JPEG or PNG depending on whether it contains transparency.

Why do my images go blurry when I export from InDesign to interactive PDF?

I am trying to export an InDesign file to an interactive PDF, but my images are going blurry.
Everything else is fine.
Can anyone help?

In the export dialog options, please reset the jpeg quality and resolutions to higher levels, and see the output results have improved. But be prepared to accept heavy pdf file size.

Why does the scroll mouse freez when opening a pdf file in the browser?

My scroll mouse is freezing each time I opened a pdf file in different tab in the browser. When I close the tab (that open a pdf file), the scroll mouse back to normal.
I use foxit to read a pdf file. I dont know if the problem occur when you use adobe product.

Kaliber wrote:
Before proceeding you must first launch Adobe Acrobat and accept the Enduser license agreement.
And, did you do that? The message will no longer occur once you opened Adobe Reader & accept the EULA.

Is there a setting such that the application closes (quits) when the (last) file is closed? Why does the application remain active when there are no files for it open?

I honestly did try to find my own answer, but cannot. Not sure why a simple question would have its answer so difficult to find. I'd just like the application to simply close after the last file is closed. It seems strange to have the application remain active. Thanks for your help.

It's also a bit strange that even though I searched throughout the community for questions like this......so that I wouldn't take up space for something already discussed........that immediately after I posted my question, the "
More Like This" side window comes up that describes questions just like mine.
So, sorry to have bothered anyone with having to read another duplicate question. I see that the answer to my first question is "No", and there's likely not a good answer for "Why".
Thanks anyway.

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

Why does the iPod duplicate songs when updating my playlists?

Why does the iPod duplicate songs when updating my playlists? Also, you cannot use the "show duplicate songs" feature on the iPod - I suppose that is because it is not supposed to duplicate songs on the iPod. But, if that is the case - why does it do it?

Try resetting your iPod, press and hold the power and the home buttons together approximately 15 seconds until the Apple logo appears. If that does not work try going into Settings>General>Reset>Reset All Settings. If that does not work try connecting to you iTunes library via the cable and un-sync the library from your iPod then sync the library. For the next 2 options backup your iPod first, then do a Restore iPod from backup, if that doesn't work... As a last resort Restore your iPod as New. I too had the red circle and square after updating to 7.0.4 the last resort fixed mine, others have reported doing all the above, all have had reports of fixing the problem and not fixing it. Give it a try, hopefully one of these works, Good luck.

Why does the purchase verification appear when I download free app?

Why does the purchase verification appear when I download free app?

Is this what you mean...
apple_prompting_some_users_for_extra_app_store_security_details

Why does the keyboard show up when i read a book in Kindle?

why does the keyboard show up when i read a book in Kindle?
it blocks about 1/4 of the page. but when i turn the ipad to horizontal it goes away.

Try these basic things and see if the keyboard goes away for good.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the Kindle App and restart. Go to the home screen first by tapping the home button. Quit/close open apps by e tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is turned off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

Why does the mail not work when i updated my 5s to iOs 8?

why does the mail not work when i updated my 5s to iOs 8?

Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

Why does the keyboard shows up when i read a book in Kindle?

why does the keyboard shows up when i read a book in Kindle?

Try these basic things and see if the keyboard goes away for good.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the Kindle App and restart. Go to the home screen first by tapping the home button. Quit/close open apps by e tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Why does the music go off when the screen light is off?

Why does the music go off when the sceen light goes off

This is usually an indication that your headphones/earbuds are not plugged all the way in. Double check the connection and make sure that no metal from the jack is showing.
B-rock

Why does the dashboard come up when I press f12 volume increase?

Why does the dashboard come up when I press F12, volume increase?

rkaufmann87 wrote:
Check System Prefrences (there is no such thing as system settings) - Keyboard - Keyboard - ensure the box called Use all F1, F2 etc. keys as standard function keys is unchecked.
lol

Why does the color wheel appear when i ckick on something abd takes awhile to go away

content://media/external/file/1892
why does the color wheel appear when i ckick on something abd takes aabd takes awhile to go away

All about the Spinning pinwheel [Beach Ball of Death] - Wikipedia - ÇÇÇ

Why does the image go blurry when I export my file to jpeg from Illustrator CS6?

Similar Messages

Maybe you are looking for