Why does the live recording of a guitar not sync with the drum tract?
I'm using Guitar Rig 4 plugin with Garage Band 09 with 10.6.8. I first lay down a garage band drum track. I then record the guitar, it sounds good and looks right on the screen while I'm recording. I finish the recording it then shifts the guitar track over to the left a slight bit to throw off the sync. I can edit it and shift it back to where it belongs but how can I get it to sync automatically. I enabled follow pitch and tempo. My guitar rig sample rate is set to 44.1. I tried setting the latency to different setting but nothing works.
I appreciate the help.
Chuck
Somebody has to have some input to this question.
Similar Messages
-
Why does my ical on my ipod touch not sync with my ical on my desktop imac ical?
It will if I put it in on my desktop though.
Please help,
BrieProbably because you did not tell the iPod to sync the calendar in iTunes.
-
Why does my imessage on my macbook pro not sync with my iPhone?
I have resently got a new macbook pro, but i cannot get my iphone and macbook to communicate on imessage. When i look at the settings on the computer, i can not add my phonenumber?
see http://support.apple.com/kb/HT5538
and mac 101
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=imessage -
My ipod gen 2 does not sync with the latest itunes
I reset my ipod gen 2 to factory settings and version 4.2.1 will not sync with the latest iTunes.
Are you using the USB docking cable that came with that shuffle (it has a mini-dock at the shuffle end)? The docking cable for the current 4th (and 3rd) gen shuffle fits, but it will not work. The connector is different.
When you say, "does not sync with iTunes," do you mean it does appear in iTunes (in the sidebar under DEVICES) but does not sync, or that it does not appear in iTunes at all? -
Using my Apple ID and password on Mobile Me, I get the message "Verification Failed". Could not communicate with the server" What am I doing wrong?
There is a MobileMe forum. You might have better luck their.
-
I got a new computer and my IPOD will not sync with the new computer.....I have a ITUNES account on the new computer and is downloading music just fine but it will not sync to the IPOD....What should I do to sync my IPOD? thanks
Copy the ENTIRE iTunes folder from the old computer to the new computer.
Attempts to sync an iDevice to a new computer will remove all content from the device and replace it with content from the new, empty library. -
I Have a 2nd gen iPod and it will not sync with the new update of iTunes is there a fix coming for this or not I'd hate to have to buy a new iPod if I don't have to
Have you tried syncing manually using the manual method included in
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
Was the iPod previously synced to another computer/iTunes library?
Next wold be to retore from backup.
iOS: How to back up -
Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again ! -
The calendar on the imac is not syncing with the iphone?
The calendar on my macpro, operating system OS X 10.6.8, does not sync with the iphone? When I look up on the info tab in itunes, the calendar is checked to sync
Completely by serendipity I just fixed this!
I was perplexed as to why all my events showed in iCal on my computer, but only some events would show in iCal on my iphone.
All day events were not showing, appointments weren't showing and neither was work, but social events were, no matter how many times i tried to sync my iphone with my MacBook Pro. Hmmm strange.
So I only just figured it out accidentally when on iCal on my iphone that if i click the 'calendars' tab in the top left hand corner, it takes me to a list of all my created calendars (and their colours) that I have in iCal.
If you tap on a certain calendar it will display only those events. Eg. I tapped on my calendar 'appointments >', and iCal only displayed all of my appointment times on my iphone and not the other events.
If I tap on 'work >', it displays all work events. Etc.
Is this making sense??
NOW:
If you go back to the 'calendars' tab on iCal on the iphone and tap on 'All >'...
then
Hooray!!! All your events will be displayed.
Hopefully! :P
Hope this helps!! -
Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com -
The vendor account you entered is not associated with the item you are trying to open. Try again.
installed eBook and authorized on Adobe Digital Edition and was able to read eBook earlier.
Due to some issue I had to reinstall the eBook. Now I am unable to read eBook it is asking for Authorization and when I input my Adobe ID and pass it gives message 'The vendor account you entered is not associated with the item you are trying to open .Try again'.
I have wasted whole day trying fixing but it does not work, i wasted my money for purchasing eBook that works on Adobe Digital Edition which only adds complexity and wasting peoples time.
Is there anyone who can help answering how can I fix vendor account not associated message issue, while i am entering correct Adobe ID and pass.installed eBook and authorized on Adobe Digital Edition and was able to read eBook earlier.
Due to some issue I had to reinstall the eBook. Now I am unable to read eBook it is asking for Authorization and when I input my Adobe ID and pass it gives message 'The vendor account you entered is not associated with the item you are trying to open .Try again'.
I have wasted whole day trying fixing but it does not work, i wasted my money for purchasing eBook that works on Adobe Digital Edition which only adds complexity and wasting peoples time.
Is there anyone who can help answering how can I fix vendor account not associated message issue, while i am entering correct Adobe ID and pass. -
PRU is not synced with the LC_TallyProducts
Hi!
For a bit more than a year now our inventory service has been malfunctioning, making our servers just collecting the inventory files and not actually doing anything with them.
If i check loader-messages.log while restarting services this sticks out:
[TRACE] [02/02/2015 15:16:30.941] [10424] [ZENLoader] [76] [] [ApplyPruAM] [] [Applied PRU is version 3.6.A.16:20131202] [] [] [] [ZENServer]
[TRACE] [02/02/2015 15:16:30.942] [10424] [ZENLoader] [76] [] [ApplyPruAM] [] [Applied LMPRU is version 3.6.A.16:20131105] [] [] [] [ZENServer]
(SNIP)
[TRACE] [02/02/2015 15:17:01.340] [10424] [ZENLoader] [75] [] [InventoryStorer] [] [PRU is not synced with the LC_TallyProducts ### PRUVersion:3.6.A.16:20131202 LMPRUVersion3.6.A.16:20131105] [] [] [] [ZENServer]
This last line is then repeated once in a while, perhaps whenever a client uploads an inventory report.
Trying to deploy new PRUs the following seems to happen:
The PRU is downloaded to /var/opt/novell/zenworks/content-repo/system-update/5D023C0602F248D9AEEB7CCA2E351132
It is unzipped to /var/opt/novell/zenworks/system-update/apply/5d023c0602f248d9aeeb7cca2e351132
Then it bails out trying to apply the PRU, complaining that a zip file can't be extracted (see attatched log)
The file in 1) above is a working zip file, seems to be copied to 2) and unzipped. In 2) there is a folder named pre which contains pru.zip. I suppose this is created somehow, but unfortunately is seems broken.
I've tried downloading the PRU on two servers, one old and one new that hasn't had any PRUs applied at all. Same result.
Looking at https://www.netiq.com/support/kb/doc.php?id=7014562 it's suggested to check if PRUVersion and LMPRUVersion from the NC_Pru table in the database are identical.
They unfortunately are not: PRUVersion is 3.6.A.16:20131202 and LMPRUVersion is 3.6.A.16:20131105.
We don't have any SR:s available so I'm hoping someone here know more about this. It's not that serious for us, we have other ways to inventory our devices, but it's nice having it as a complement.
Any suggestions are welcome!tbjorklund,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com -
I want to be able to setup a user mobile account, with the home directory stored locally and not synced to the server. What is the best way to do this? I am running Server 10.6 with 10.6 clients. Open Directory will be used to authenticate and manage preferences. Also, this one account will be used simultaneosly in a computer lab setting, so files will be stored locally in the client, hence the need to NOT sync to the server. Any Ideas?
currofelix wrote:
So what does WGM Look like in the Home Tab? afp://servername.domainname/Users? or afp://Users?
The attached screen shots should help you:
You will only have to do this step once. Obviously you want to use the user's shortname here.
Then, you will see this as an option in WGM: -
Cisco SPA525g2 Date and time Not Synced with the PBX server
Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
My ipod will not sync with the computer, but it will charge?
My ipod will not sync with the computer bt it will charge.. the ipod doesnt come up with "do not disconnect" anymore.. i have been puting music on it for the last week and all of a suden i cnt put music on anymore.. Whats the problem?
If the ipod is no longer being seen by your computer, please try the following troubleshooting steps located on this website.
http://docs.info.apple.com/article.html?artnum=61711
Maybe you are looking for
-
I have maintained user list in ztable along with distribution channel. I want to send mail to specific user according the table. please suggest me how to proceed.
-
Hi All, I would like to display all offset account codes of a certain transaction of a G/L account code. In G/L report, I only have one offset account code. I use this query but failed: SELECT T0.[RefDate], T0.[DueDate], T0.[BaseRef], T0.[TransId], T
-
IPad displaying an Hotspot Error message when trying to connect to wifi. How do I fix?
When attempting to connect to the public wifi network at work on my iPad, I started getting the following error message today: "Error Opening Page - Hotspot login cannot open the page because the network connection was lost." In order to utilize the
-
DecimalFormat for Double value
hi all, I have one problem that is I have Double value like 96.44444 but I want 96.4 only means only one decimal point after the value so could anyone send the solution... I think we can solve this problem by using "DecimalFormat" ... but I don't kno
-
Hello, In BI we fetch the Exchange rates by right clicking the source system and selecting Transfer exchange rate.Do we have to do this task daily to to have the latest exchange rates? Also if I want to convert the amount in my query to a foreign cur