Why doesn't Cisco add full IPv6 support to the firmware of the wrvs4400n small business router?

I own a Cisco wrvs4400n. I love this router but have been unhappy that it is not ipv6 ready. I have been disappointed that Cisco has not developed/introduced a new follow-on router, an advanced version of this router adding AC wireless support and speeds, more wireless signal strength, true dual band as well as the full ipv6 for the web additional to the intranet (as they have finally added in the latest firmware update) - to name a few. What they are offering presently is embarrassingly weak. They seem to be ceding the small business arena but no one else seems to be bringing out a good product for this market either. If they would at least provide support for IPv6 on the web, I could wait until they finally wake up and develop a good follow-on wired/wireless gigabit router.
Linksys, which they sold off for whatever reason, has been developing some impressive routers by hardware measures, but their firmware does not offer access to it to control and configure it that I would expect in a SBR, like they began in the wrvs4400n. Either I need Cisco to add that ipv6 so I can at least utilise the incipient roll-out of IPv6 from my ISP for time being or finally bring out an exciting new follow-on router with all the controls of that new architecture extending what they offered in the 4400!
If anyone has information/knowledge about either of these two options, developing another firmware update with full ipv6 or developing and introducing a follow-on router, please inform me about it. I am a 1 to 6 person operation and want to move into the present, at minimum, or, preferably, future. Thank you any one who can enlighten me about this.

Voskuil67 wrote:
I have twice requested (paid) tech support for getting BB Desktop Software for Mac to work
Sorry, I don't think I understand. You have initiated a "paid" per-incident support ticket with RIM, and paid for these services, and you are not getting a call back?
When you paid for this, you should have been issued a case number or support incident file number. If you have that, you should contact RIM immediately for resolution. If you need a phone number, try 1-877-255-2377
If the above is not your situation, could you please explain further?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Why doesn't Lion OSX 7.2 support Pando Calendar? Installed the Lion OSX7.2 and lost my calendar!

    Why doesn't Lion OSX 7.2 support Pando Calendar? Installed the Lion OSX7.2 and lost my calendar!

    Have you gone to the developers site? Do you have the latest version?
    If you're having problems with the software on Lion and you have the latest version you need to contact the developer.
    regards

  • Why doesn't iTunes add protected MPEG-4 audio files to its music library?

    Why doesn't iTunes add protected MPEG-4 audio files to its music library?  I copied these files to my iMac from an old PC laptop that no longer has internet access.

    After downloading via iTunes, I move MP3 files from the default iTunes podcast folder to another folder (on an a external disk), I also change the name of the file and I change some MP3-tags.
    You download from the iTunes store, delete the podcast, mess with it, move it around, rename it, change the tags then try to add it back to iTunes?
    I want all my files in one index, the iTunes Music Library
    In iTunes, right click - get info, click the Options tab and set *Media Kind:* to Music.

  • No full IPv6 support in Airport?

    Hi,
    While the Apple Airport Extreme seems to not interfere with basic IPv6 operation (not dropping IPv6 packets, etc.) it does however not seem to fully support it either.
    It does not seem possible to me to set an IPv6 address for the primary (or secondary) RADIUS server in the setting (in the windows configuration tool). Entering "2001:xxxx" or enclosed by "[]" does not work. It seems that the Airport only accepts IPv4 addresses...
    Maybe there is another way of setting an IPv6 address there? Or is it really the case that we have to stick to IPv4 here? In case yes, is there a possibility for an upgrade that includes full IPv6 support in the future?
    Thanks
    (posted in Airport section as this problem is most likely not restricted to the Airport Extreme)

    Andre John Mas wrote:
    I was doing a quick test and it would appear that Network Utility can't ping an IPv6 address. Pinging ::1 results in:
    ping: cannot resolve ::1: Unknown host
    You can use ping6 instead from the command line:
    % ping6 ::1
    PING6(56=4088 bytes) ::1 --> ::1
    16 bytes from ::1, icmp_seq=0 hlim=64 time=0.104 ms
    16 bytes from ::1, icmp_seq=1 hlim=64 time=0.177 ms
    16 bytes from ::1, icmp_seq=2 hlim=64 time=0.169 ms
    ^C
    --- ::1 ping6 statistics ---
    3 packets transmitted, 3 packets received, 0% packet loss
    round-trip min/avg/max = 0.104/0.150/0.177 ms
    % ping6 localhost
    PING6(56=4088 bytes) ::1 --> ::1
    16 bytes from ::1, icmp_seq=0 hlim=64 time=0.095 ms
    16 bytes from ::1, icmp_seq=1 hlim=64 time=0.164 ms
    16 bytes from ::1, icmp_seq=2 hlim=64 time=0.163 ms
    ^C
    --- localhost ping6 statistics ---
    3 packets transmitted, 3 packets received, 0% packet loss
    round-trip min/avg/max = 0.095/0.141/0.164 ms
    HTH
    Message was edited by: kajtzu

  • Why doesn't Maven find jfxrt.jar, although it is included in the JDK?

    Hi,
    Why doesn't Maven find jfxrt.jar, although it is included in the JDK?
    My solution to build JavaFX apps with Maven is:
    <dependency>
                <groupId>com.oracle</groupId>
                <artifactId>javafx</artifactId>
                <version>2.2</version>
                <scope>system</scope>
                <systemPath>${java.home}/lib/jfxrt.jar</systemPath>
    </dependency>It works, but I wonder why the Maven build process can't find it automatically, as any other Java dependency, too.
    If I build without the dependency, it can't find javafx imports.
    Since Java 7 Update 6 it is included in the JDK.

    There is a long drawn-out thread on this (you don't need to read it):
    Error initializing OC4J server (JDev 10.1.3 EA1) "JDK 7u6 JavaFX integration - Is jfxrt.jar supposed to be on the classpath?"
    Short summary is that jfxrt.jar is in the jdk/jre as of 7u6, but not on the default classpath for the jdk/jre (as of 7u13).
    This will change in a future release (e.g. I believe the latest early access builds of jdk8 do have jfxrt.jar on the default runtime classpath).
    So for now, you will need to explicitly add jfxrt.jar to the classpath. There are various ways to do this, one is to use a system dependency and then use the maven ant run plugin to package your app as is done in this example: http://code.google.com/p/willow-browser/source/browse/pom.xml
    <dependency>
      <groupId>javafx</groupId>
      <artifactId>jfxrt</artifactId>
      <version>${javafx.min.version}</version>
      <scope>system</scope>
      <systemPath>${javafx.runtime.lib.jar}</systemPath>
    </dependency>
    <plugin>
      <artifactId>maven-antrun-plugin</artifactId>
      <version>1.6</version>
      <executions>
        <execution>
          <id>create-launcher-jar</id>
          <phase>package</phase>
          <goals>
            <goal>run</goal>
          </goals>
          <configuration>
            <target xmlns:fx="javafx:com.sun.javafx.tools.ant">
              <taskdef
                  uri="javafx:com.sun.javafx.tools.ant"
                  resource="com/sun/javafx/tools/ant/antlib.xml"
                  classpath="${javafx.tools.ant.jar}"/>
                <fx:application id="fxApp"
                    name="${project.name}"
                    mainClass="${exec.mainClass}"/>
                <fx:jar destfile="${project.build.directory}/${project.build.finalName}-launcher">
                  <fx:application refid="fxApp"/>
                  <fx:fileset dir="${project.build.directory}/classes"/>
                </fx:jar>
                <attachartifact
                    file="${project.build.directory}/${project.build.finalName}-launcher.jar"
                    classifier="launcher"/>
            </target>
          </configuration>
        </execution>
      </executions>
    </plugin>Another way would be to make use of the zenjava javafx maven plugin:
    http://www.zenjava.com/2012/11/24/from-zero-to-javafx-in-5-minutes/

  • Why doesn't apple have a file of events that ties to the iCal program and the Address book file? By having that relationship it seems that you could call up all of the events tied to a customer while in the address book or likewise call up all of the even

    Why doesn't apple have a file of events that ties to the iCal program and the Address book file? By having that relationship it seems that you could call up all of the events tied to a customer while in the address book or likewise call up all of the events tied to a contact that was in the iCal program as a scheduled meeting. Even in the to do's you could easily look back at the events tied to an individual so as to bring yourself up to speed with what you were doing with the individual in mind.

        I definitely understand your concern and I apologize for all the frustration. Verizon Wireless has a strong customer commitment to delivering the best from our service and staff. I am disappointed to hear the service you received did not reflect this commitment.
    I definitely want to help get to the bottom of this and further assist you. Please reply to my direct message so I can access your account and further assist. I am sure we can get this resolved.
    JohnB_VZW
    Follow us on Twitter @VZWSupport

  • Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

    Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

    I'll provide some Proof
    Link 1
    Link 2
    Link 3
    you are not the only person with this problem maybe it will come back in Mountain Lion who knows. 

  • Does Cisco make a RELIABLE small business router?

    Just as I asked, does Cisco make a RELIABLE small business router?  Common features required would be single or dual WAN, VLAN support (at least 4), multiple SSIDs, some measure of inter-VLAN routing (such as a shared printer in an office) and firewall.  A GUI interface is really a must for small business routers, but everything that has a GUI seems to either be terrible in terms of reliability and firmware, or be crippled by a lack of features (such as the InterVLAN Routing ON/OFF setting!)
    From what I have seen there are several extremely unreliable options available (such as the RV220W & WRVS4400N), but nothing that is stable.  I am familiar with the Cisco 800 series routers and deployed these, but they take quite awhile to configure properly unless you have a template or a vast understanding of the CLI.  The lack of a true GUI and requirement to run a specific version of Java for the SDM to function makes them a pain for a SMALL business enviroment, but good for someone who has an IT department on staff. 
    Any options here, Cisco?  I would love to use your products on these smaller jobs as opposed to the Sonicwall and Watchguard brands, but I keep getting "pushed" back to them by issues with your products.

    Common features required would be single or dual WAN, VLAN support (at least 4),
    With a minimum of 4 VLANs, the 860 is out of the question as this model can support only 2 VLANs.   The 880 can support up to 8 VLANs.  Now both the 860 and the 880 has a 4-port, FastEthernet, layer-2 switch. The 890 can support up to 12 VLANs and have an 8-port, FastEthernet, layer-2 switch at the back.
    Now all the models mentioned, 860, 880 and 890, can support PoE.  The 860, 880 and 890, can support 4-ports of PoE.
    I've two vital questions for you.  They are:
    1.  Are you planning to integrate your wireless with your router?
    2.  What is your bandwidth?
    If you plan to integrate a wireless access point with your router, you need to be mighty careful with this.  The reason is because of the potential location of the router in the premises.  Most of the time, the router is located in the far corner of a property and inside a metal box/cabinet.  For starters, the location is far (to very far) from the clients so the wireless signal is propagating to no one.  Next, if it's inside a box or a cabinet the metal shell of the cabinet can disrupt the way wireless propagates.
    This is the reason why I mentioned the PoE option.  If the location is similar to what I've described, then it's better to get a router AND WAPs separate.  This way you can move the WAP to wherever your clients might be.
    Next is your bandwidth.  What router to buy depends on what bandwidth you've got. 

  • Cisco 3550 EMI IPv6 support

    Hi
    How good is IPv6 support on the 3550 with the latest firmware?
    I use them now as routers/L3 switches.
    Must I replace them, or still going strong when i implement IPv6?

    The following link should help:
    http://www.cisco.com/en/US/partner/docs/ios/ipv6/configuration/guide/ip6-roadmap.html
    Thanks,
    Laurent.

  • Why doesn't ical add all of my google calendars on the same page?

    why doesnt ical add all of my google calendars on the same page.
    like in gmail, i have different calendars that all show up together on the same page.
    i see that they are there in ical when i click window. but the are not all see together on one page.

    If the box next to each calendar in the list is checked, it should show the contents of the calendars on the page. Unchecking the box hides the calendar.

  • Why doesn't Firefox 9.0.1 support Norton products, ie Norton Toolbar?

    Firefox 9.0.1 doesn't support Norton Toolbar.

    * Perform the suggestions mentioned in the Reply by '''senthilkumar''' in -> [http://community.norton.com/t5/Norton-360/Live-update-won-t-get-Norton-Toolbar-v2011-7-4-3-as-required-for/m-p/629909/highlight/true#M63757]
    * Perform the suggestions mentioned in the Last Reply by '''yank''' in -> [http://community.norton.com/t5/Other-Norton-Products/Norton-Comcast-security-suite-Ver-5-1-0-29-Norton-Toolbar-not/m-p/637223/highlight/true#M43664]
    Check and tell if its working.
    -> Update All your Firefox Plugins
    * https://www.mozilla.org/en-US/plugincheck/
    * '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
    * Restart Firefox

  • HT202157 Why doesn't Apple add Sirius xm and Amazon prime?

    Why doesn't Apple expand Apple TV options?

    likely because both are their compatitions and I doubt they really make money on selling appletv's but make up for it when people who buy appletv's use them to buy stuff from itunes store rather then their compatition
    anyway these forums are user helping users so nobody knows for sure and apple will not get your advice here as they dont read the forums so if you want to pass on your words of wisdom use the feedback channels its the way to apples ear
    http://www.apple.com/feedback/

  • Why doesn't my card reader work when I take it from the camera and put it in the reader? Nothing happens and it doesn't show up in finder.

    When I put my card into the reader, nothing happens. It doesn't show up in finder so I can't dismount it. The pictures on it aren't readeable all of a sudden, except for two of them, and that's all that would download to iphoto, but I had to connect the camera since the card reader doesn't resond.

    Hi bricknut dab,
    Welcome to the Support Communities!  Are you asking about the SD slot on your Mac, or is this an external card reader plugged into a USB port?  If it is the one on your Mac, the article below may be helpful.  Did you try more than one SD card?  You can use Disc Utility to erase and reformat the card if needed.
    About the SD and SDXC card slot
    http://support.apple.com/kb/ht3553
    I put the card in the slot, but it did not mount.  What should I do?
    Remove the card and insert it again. Sometimes, if you put the SD card into the slot too slowly, it may not mount properly.
    Can I reformat an SD card with Disk Utility?
    Yes. Using Disk Utility, you can partition and format an SD device as FAT32 (using the MS-DOS FAT setting) or Mac OS Extended. The Mac OS Extended format can only be used on Macintosh systems. Cards formatted to Mac OS Extended will not be recognized by non-Apple systems. Formatting cards larger than 32GB for use with digital cameras, GPS, and other devices may require formatting them with the exFAT file system. When in doubt, format the cards in the device you intend to use with the card.
    Cheers,
    - Judy

  • Why doesn't a List update it's display when you change the dataprovider Array?

    Hi. I have a list and an array with more strings inside. If i
    remove some of the strings from the array and add some new strings
    then the list display doesn't update. How can i force the list to
    update?
    List1.dataProvider = Array1;
    Array1.pop();
    Array1.push("test");
    List Update??????

    Hi MaxMuld,
    Because it has to be ArrayCollection, not the Array.
    Documentation about Datagrid.dataProvider says that Array as
    provider will be converted to ArrayCollection. And ArrayCollection
    performs all the notifications if you add/delete items in it.
    If you still want to use Array you should do the following:
    var ar= new Array();
    ar.push(x)
    grid.dataProvider = ar;
    grid.dataProvider = new Array();
    ar.pop();
    grid.dataProvider = ar;
    But this is very inefficient.
    Dmitri.

  • Why can't I add tasks and reminders manually with iOS7?  The   has disappeared.

    I just upgraded to iOS 7 and went to add a new task in the reminders app.  I realized that the + has disappeared and I am unable to manually add a task. Is this intentional? Is this a miss, or am I missing something? This is happening both on my iPhone 4S and my iPad 2.

    Same concern and request. Scrolling to the bottom of the Task list is a pain - I typically have 30 or more as part of a GTD-lite technique. Siri workaround is partly useful in the right circumstances / surroundings. And better if you are on a walk or something like that. Pls restore the +, or provide a "down arrow" to get to the bottom of the Task or Reminder list. Or put the blank "next line" at the top of the list (like Outlook has done for years). Makes me wonder sometimes whether Apple designers and execs actually use their software? Or, whether their beta tester did not come across this obvious limitation / regression. Please try harder!

Maybe you are looking for