Why doesn't my embedded movie play when I export s a video?

I am trying to export my project in keynote 09. However, the embedded movie does not export and when the movie plays it gets stuck on that slide where the embedded movie is. I even tried opening the file with 08 ( I shouldn't have upgraded) and it can't be opened. Any advice?
Thanks!
OS 10.8.4

From my experience, most Windows users do not have QuickTime player installed on their machines.
The alternative is to provide PDF or PowerPoint, but the software for these are not installed by default, and of course Keynote is a Mac only application, so you are very limited in how they will easily view your presentation.
I always provide Windows Media Video files for PC users, this requires separate software to be purchased to convert Quicktime to WMV. Fip 4 Mac Studio
I have had on occaision to supply clients with JPEG image files as this was the only method they could view the presentation as they were prevented from installing additional software.
You will need to ask your users if they are prepared to install additional software and if they want video or a slide presentation.

Similar Messages

Why does the page not move smothe when i scroll?

Why does the page not move smothe when i scroll?
Sometimes it even move slower then i Scroll?
I use a Mac and i have tried to reinstall the program.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
See:
* [[Troubleshooting extensions and themes]]

Why doesn't my imac turn on when I turn on Apple TV?

Why doesn’t my imac turn on when I turn on Apple TV?

Yes, otherwise some people might have to walk up to the third floor and turn on iMac,
and then go back down to living room in order to stream form iTunes. My iMac is close,
but not in same room. There must be something I don't have set up right.

HT1725 why will my downloaded song only play when connected to wifi

why will my downloaded song only play when connected to wifi

I have the same probelm and I'm trying to find out.

Why do only some QuickTime movies play on the iPhone?

Why do only some QuickTime movies play on the iPhone?
I have noticed that only some QuickTime movies play on the iPhone, does anyone know why?
Thanks,
Brandon

Depends on how the movies are encoded for Quicktime (i.e. which compression/codec). The iPhone supports only H.264 video.

Why dont all my photos (345) play when i select a specific file?

Why dont all my photos (345) play when i select a specific file?

Hey there Mrk_wrd,
It sounds like you can successfully sync with iTunes and get no error messages, but when you try and play your music, the songs just scroll through and will not play.
I think I would start with closing the Music app on your phone and restarting it. Then try again to play your music.
Restarting your iOS device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
From: iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists then I would resync your content to your phone.
Plug your device into iTunes and click it. Then go to your Music tab and uncheck the Sync Music checkbox, and click apply in the lower right corner. That will remove the music from the iPhone.
From: iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
When that process is done, restart both your iPhone and the computer, then go back into iTunes and recheck the Sync Music checkbox and click apply again to resync your music to the phone and test it again.
Thank you for using Apple Support Communities!
All the best,
Sterling

Why does my RAW image look grainy when I export it in to Photoshop CC from Lightroom for editing?

Why does my RAW image look grainy when I export it in to Photoshop CC from Lightroom for editing?
Checked LR's setting for Ps export and they haven't changed since it was OK a few days ago? It is OK if you zoom in but in 'fit page' it looks terrible!

I have exactly the same problem and it has got worse today as the photos also now open in smaller windows for some reason

How do I add silence to the beginning of a track? Before the 10.0.3 update, you could drag the region further into the timeline and it would automatically create silence before the track plays when you export it. What am I missing?

Before the 10.0.3 update, you could drag the region further into the timeline and it would automatically create silence before the track plays when you export it. What am I missing? How do I i do this in the current version of Garage band?

what is the problem? Can't you drag the audio region to the right, or is the silence at the beginning of the track missing?
You could mark the measures you want to export by the Cycle region. Then any beginning silence will be included.

When I export a edited video, maximum dimensions are reduced. :(

Hi, I'm new to use Adobe Premiere Pro CC. Its version is 7.2.2. I use it on my Mac. I'm in free trail.
I imported a video with domentsions of 2560 x 1600. Then I edited this video. When I tried to export edited video, the maxmum dimentisons of video is 2048 x 1280.
I wanna export my edited video on dimensions of 2560 x 1600. How do I get this done?
Thank you.
Wei

Hi, Neil.
In sequence settings, the dimensions are 2560 x 1600. I made a screenshot: https://www.dropbox.com/s/lo8im1m7lfa710a/Sequence%20Settings.png
When I export the edited video, I choose "Match Source - high bitrate". I also made a screenshot: https://www.dropbox.com/s/oqo4ngrk0jdmupk/Export.png
I wait for you help. Thank you.
Wei

IPhone Displayes "movie cannot be played" when trying to view youtube video

I have a iPhone 3G and I cannot play certain movies from YouTube. The movies play fine on my husbands computer. I connect with both 3G and Wifi. The issue is on both connections. My husband did the latest updates last weekend.
Help!! I want to see my youtube movies

How are you accessing YouTube? Via the YouTube app or via the Safari browser? You cannot access youTube via Safari because the iPhone doesn't support Flash, and YouTube used Flash. The videos accessed via the You Tube app on the iPhone are a special subset of videos that have been recoded to H.264 for iPhone compatibility.

WHY WON\'T QUICKTIME HOME MOVIE PLAY ON TOUCHSMART

Why won't a quicktime home movie play on touchsmart 310
This question was solved.
View Solution.

Have you installed the quicktime software from Apple? There are other players that may also have the required codecs to play the video.
That is what is required in order to play a quicktime movie.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

QT - how do I stop movie playing when click HREF to new movie

I want to be able to open a new QT movie at any time by clicking (HREF), but how do I stop or close the first movie? I have a text tract running on the first movie with captioning. At this point I have the new movie opening and the old movie playing in the background. I'm stumped.
eMac Mac OS X (10.4.8)

Give your FLVPlayback component an instance name and then,
possibly from the navigation element that moves the user from that
frame, tell that component instance to stop();
Without a more complete description of your movie's structure
its difficult to tell where, or in how many places, you should
issue the stop() command.

Why doesn't the result look right when comparing?

Why doesn't the result look right even I used higlight execution to check true and false and found to be correct right?
Attachments:
comparenresult.zip ‏27 KB

At first I was not sure what you were asking. After looking more closely, I think I can answer your question.
First of all, you need to initialize your shift register. This is the array of Boolean results. The first time through it works OK, but subsequent runs are also added on instead of replacing the results, even though you used a local to "clear" the array first.
You are adding 2 to the iterations and indexing on the new number. This is a so that you skip the first two "bad" values. Therefore, you only have 13 data points and should only be running the FOR loop 13 times. Change the FOR loop count constant to 13 (or get the array size and subtract 2 and wire it in if the number of tests is variable).
Also, there is an 'In Range a
nd Coerce' node that will perform the two tests and the AND all in one node. This was not an error, of course, but it does make it a bit easier to read.
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]
Attachments:
fixed_test4a.vi ‏73 KB

Why are some of my pages blank when I export to PDF from InDesign?

I have a fairly large InDesign book that I've been trying to export to PDF unsuccessfully. There are lots of images and te
xt in the book and half export fine and the other half don't. When I export the files individually, they export fine. Any advice why the book won't export correctly?

I wouldn't expect either conversion or working froma server to affect the export (though working with your ID files directly on the sever is a bad practice -- big potential for disaster due to a network error causing unrecoverable file damage).
First, do a "Save as" to remnove any unneeded old undo inofrmation from the file and reduce its size, then copy it to your local machine and try to export. If you still have a problem, try emptying your temp folders.

Why won't Lightroom save my edits when I export them?

When I export my photos as JPEGs, the changes that I've made aren't saved. I open the exported photo but it looks just like the original with no changes made to it. I am using the trial version right now as I am waiting for the software in the mail. Could this be why? HELP! Below: the left picture is the exported photo and the right picture is what it should look like!

No, the trial version is a full version of Lr with all features enabled.
Did you select <Original> in the Export Dialog / File Settings section?
<Original> means that you export the file in its original state, before you did any editing.
If you want your edits included in the exported image you have to select one of the file formats other than <Original>.
See Screen shot:

Why doesn't my embedded movie play when I export s a video?

Similar Messages

Maybe you are looking for