Why don't original mac mini disks work anymore?

Recently the hard disk of my mac mini had to be replaced. On the new hard disk I'm now trying to reinstall iLife, but the computer won't accept the disk. I've checked and the same happens when I try to run the hardware test with the original disks. All other disks will load (Microsoft etc). The problem seems to be limited to Apple products. Anyone any idea what is happening?

I have Lion on the hard disk, and I had the same version of lion on the broken disk. iFactors (an apple service point) did the repair. This is the third hard disk in this computer. My Mac mini seems to get through one a year. iFactors replaced the last one too. My iMac (also lion) will read the hard disk without any problem. Apple telephone support have no suggestions at all.

Similar Messages

ML clean install on 2013 Mac Mini - not working

Hello guys,
I have a weird problem with my new Mac Mini. I received it yesterday, the first thing I wanted to do was to format "Macintosh HD" and do a clean install of Mountain Lion using a bootable USB. I will be using the computer only for audio composing / mixing and I don't want any pre-installed junk on it. I've done this numerous times with other Macs in the past. However, when I try to boot using the Mountain Lion USB, it gives me a "prohibited sign" and I can't boot from it. Then, I tried to boot with the Mountain Lion recovery partition and re-install Mountain Lion through there, but I can't format the internal HDD using Disk Utility, most likely because the recovery partition is also on that hard drive? I've tried several things, without success:
Repair disk (permissions)
Reset PRAM / NVRAM
Make bootable USB's using Disk Utility, Lion Disk Maker and Carbon Copy Cloner
I imagine if I could boot into recovery mode and format the HDD from there, it would work using online recovery, but how can I format the HDD when the recovery partition is also on this HDD? And why doesn't the Mac Mini accept the Mountain Lion installer USB in the first place? Or does the installer not recognize the Mac Mini? Very confused, any help would be appreciated.
Best regards,
JPeters86 / NL

If your Mac mini has a fusion drive, it shipped with a "special Fusion Drive only" version of Mountain Lion. While the difference is apparently mainly a Fusion Drive aware version of Disk Utility, no other version of Mountain will boot your mini. However, you should be able to reinstall a working copy of Mountain Lion complete with all the apps you did not want by doing a Cold boot (boot from a powered off condition) while holding down the Commd+R keys and performing the reinstallation from the Recovery drive. An internet connection is required.
If by any chance you erased or reformatted the entire drive, thereby deleting the Recovery partition, you can still recover by holding down Option+Command+R during the reboot. This will force a reboot via the internet and will be a lot slower, but you should still be able to install a functional copy of Mountain Lion this way.
Hopefully the two streams of OS X will merge in Maverick.

My 500gb mac mini disk has 2mg available because something called "backup" is using 451 gb. I can't find where to delete this backup?

My 500gb mac mini disk space is being used by something called "backup" (451gb). I have nothing left to work with. I can't find where this file(s) is so I can delete it.

For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
For ODS:
security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
For GP:
security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Original Mac mini and 1680 x 1050 resolution

I have one of the original Mac mini's with the ATI Radeon 9200 graphics card. Can this be used with a 22" 1680 x 1050 DVI or VGA display?

My PPC 1.42 w/1g RAM works fine with my Dell 22" widescreen at 1680x1050 utilizing VGA input, BUT will not reliably display the same using DVI as connection method. It acts as if it is overwhelming the system using DVI.
Not the display...I had it replaced.

Why won't my mac internal microphone work?

Why won't my mac internal microphone work?

I just found and removed a small piece of sticky tape which was covering the mic. The mic is on the top surface of a mac - you can only just see a lighter coloured small round circle in line with the camera on the top narrow surface. My problem was sorted despite all other help and just before I gave up. Check no-one has posted a sticky message, camera cover or even an ornament over your mic. How many folk know where the mic is?

I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite

I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite.
I have downloaded drivers from Brother
I have tried searching for the printer once the drivers have been installed, but nothing...
Not sure what else to do - any helpful suggestions are welcome.
Thank you

I tried the Reset Printer option - it didn't work at first but then I decided to download the drivers again... and now all is fine and dandy.
Thanks for your help

Will the mac mini definitely work with a 50 hertz tv?

Just wondering if the mac mini will work with a 50 hertz tv

Yep - just go to the System Preferences and choose display and hit 'detect display' which will give you 1080x and other TV resolution options (assuming you have a modern LCD or similar).
You should then be able to select 50 or 60 hz.

Why having bought a mac mini server 2 weeks ago iam i not geting my free lion upgrade

why having bought a mac mini server 2 weeks ago iam i not geting my free lion upgrade

See Here for what purchase qualifie and the procedure for getting a free update.
Steve

Why don't free pre release streams work on ios devices?

Why don't free pre release streams work on ios devices?

The pre-release streaming won't stream unless acessing the iTunes store from a US or other pre-release country.

Why does my new Mac Mini restart on its own?

Why does my new Mac Mini restart on its own?
At diffrent times of the day or time.
Thanks.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Is there anyway I can transfer my music from my iPod touch to my iPad? My computer with my original music doesn't work anymore!

Is there anyway I can transfer my music from my iPod touch to my iPad? My computer with my original music doesn't work anymore!

See also Recover your iTunes library from your iPod or iOS device.
tt2

HT1338 my mac mini disk drive doesnt work? any ideas please

need some help.. my mac mini does not play disks.. any advice?

Hello fawehish
Thanks for the question, and welcome to Apple Support Communities.
The following article provides the most relevant information to your issue, and may lead to a potential resolution:
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Thanks,
Matt M.

Why won't the Mac Mini connect to the internet but won't browse

Here's an odd one...I hook up the mini with an ethernet cable to the cable modem - it finds the settings on it's own - IP address, subnet - the whole thing. That's just great - go to the activity monitor - and look at the network - packets going and coming - but when I go to Safari...it tells me that I'm not connected to the internet...that's funny - according to the activity monitor and the network settings - I am.
What am I missing here? I've tried the network assistant - and even my laptop can't connect to the cable modem automatically from that either and it is a never fail - plug and play.
Mac Mini Mac OS X (10.4.6)

Try checking the settings in Safari. I'm not sure how safari work,(Don't have my mini yet) but if it's anything like firefox or IE 6, you should have a setting that says "Connection Setting" or something similar. Make sure it's set to auto detect or broadband or w/e your options may be. (Not sure exactly how safari works so i'm not sure what options you may have there)
If those settings are correct and nothing changes, another thing you can try is opening quicktime or visiting the itunes music store. If the internet works for these programs then you are defenately connected and it's a based safari problem. In fact, sometimes simply accessing the net through quicktime, itunes or windows media player (For windows) have re established my connection when it randomly stopped working with firefox. (I have no idea why) Browsers are weird sometimes so try opening quicktime and see how that works out. If quicktime or itunes connects, reopen safari and check to see if it made any change. If quicktime and itunes can't connect to the internet, then it might be a more complex issue regarding your network settings. (can't help at all there until I learn the mac ways of interneting)
Sorry I can't be a bigger help, like i said i don't have my mini yet (Or any other mac since my old g3 non tower :P). Hopefully just opening itunes or quicktime will be able to help you (not sure what it does but it works for me sometimes). Or maybe the settings on safari need to be reconfigured, and that could be ur fix.
Anyways Good luck,
Wannabe

Mac Mini Server works fine but one folder!

Hi all!
It's my first time on the forums so let me introduce myself first. I'm Dylan de Heer, currently working at Today, a communication and design studio in the center of Holland (Utrecht ftw.).
About a year ago we had someone install a mac mini server for us with daily backups and what not. Now since a week or two it happens that one folder became corrupted. Anyone that enters it, has his whole finder freeze up. Now would it be a small product or unimportant folder we would've deleted it and copied it from a local machine again. This time though we're talking about a full client's folder.
When anyone tries to enter the folder we just see a black space, no icons, no files, anything. My guess is that nothing is deleted. I think we're just unable to access the folder properly. Now I'm not much of a tech guy and the person that installed the server is unreachable. Would anyone have an idea of what could be the cause I'll manage to fix it. If it's terminal related Please provide a detailed description as of what I'm supposed to run.
I'm sure I'm missing some important information as to what kind of server we're running but frankly I don't really know the specs. So I'm very open to suggestions as to what I should do, haha.
Anyway, thanks in advance and I really hope that we can find a way to fetch that folder back. In the meanwhile I'm gonna take a look if I can access the backup disk somehow. Thanks!
Dylan

Good suggestion, let's see if we can. I'll come back to you!

I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time...
Thanks for any help.

I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
Are you talking about files you are hosting on the TC?? Not Time Machine backups??
Can you tell me exactly how you are accessing the TC.. please do a test..
Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
Do the same test from the same computer with wireless turned off running ethernet.
Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
eg
Now do the test from the HP laptop and give me the results from that.
Is the issue wireless only.. ??
Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
About Wireless Diagnostics

Why don't original mac mini disks work anymore?

Similar Messages

Maybe you are looking for