Why has one of the team seats changed to trial only

One of the team seats that has been in use since purchasing Creative Cloud has turned into a trial license.
This happened when creative cloud updated and it asked to sign back into the account.
I have deleted CC re signed in , it now allows full usage on some apps but not photoshop or indesign.
I don't understand!
Any advise welcome.

Hi,
Please refer to the help document below to fix the issue:
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
Regards,
Sheena

Similar Messages

Why has not received the message about the change secret Questions?

Why has not received the message about the change secret Questions on my email?

Be patient. You don't get an immediately notification email. Record the Claim Number somewhere in case something goes wrong. It can take up to 72 hours. I got mine in about 54 hours.

Why has iMessages from iPhone to iPhone changed from blue to green recently?

Why has iMessages from iPhone to iPhone changed from blue to green recently?

Hi Steve
So your WiFi is turned On for your phone... just wanted to check!
Do you know if it's only your home wifi or all wifi sources?
Try a simple reset of your iPhone
1. When the iPhone is on ... simulatneously hold down your off/on button (top of your iphone) and push the home button (the one at the bottom of yopur iPhone).
2. Hold this until the Apple icon appears (the screen will go black first).
3. Try sending a message to your wife (Just testing etc)
Cheers

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

Yea, and it's a pain to get to. What was the rational for removing the print size button? With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size. Of all the buttons you could have taken away, why not fill screen? I never use that.
Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop. The Brush preview window is unchanged in CC but in CC2014 it's basically worthless. If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

Why is one of the contacts on iphone in blue font

Why is one of the contacts on my iphone in blue font with a blue icon man?

That should be you!
It is the default for autofill for all forms filled out through Safari
Do you need to change that?

How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red.

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
To help avoid future transgressions set the Restrictions for In-App Purchases...
Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213

Does Premier have an Screen recorder if not does adobe has one in the Cloud ?

Basically Does Premier have an Screen recorder if not does adobe has one in the Cloud ?
Thanks !

Adobe Captivate is the one but it's not in the Cloud. Camstudio is also very good at that.

Why has ios6 removed the ability to gift on iPhone

Why has Apple removed the ability to gift Apps and music in ios6? I'm so, so angry about this issue. I want it back IMMEDIATELY!!!!!!

Hi, I have a similar problem. I live in the UK in an area where the 3G signal is weak. Ever since I have used iphone (since iphone 3G) - I have used it with 3G switched off when at home. That way it was forced to use the GPRS (or 2G) mobile signal from o2.
This worked fine, and I had 4 or 5 bars of signal always. If I enabled 3G at home that would drop to between 1 bar and NO SERVICE. This made using the iphone as a telephone virtually impossible as call quality was rubbish and often dropped out.
I used wifi for internet so it was never an issue, and I switched on 3G when out if I needed it.
Since the ios8 upgrade APPLE have taken away the ability to switch between 2G and 3G. Instead the button now switches between 4G and either 2G or 3G, this either is decided by the iphone itself depending on the strength of the 2G and 3G signals.
I have spoken to APPLE twice about this. The first time yeaterday they flatly blamed o2 and said it was nothing to do with them. So I called o2 and guess what; yes you got it, they blamed Apple. IT reminded me of when Steve Jobs got up on that stage and denied there was ever a problem with the iPhone 4 antenna a few years back.
So I called Apple back, and today the guy I spoke to did seem to understand my problem and sympathise with it. He said I was not alone and that hopefully it would be fixed by an update.
Luckily for me I am only 3 months away from an upgrade, so if they dont fix it by then I am going to take the leap and jump to Android.
The short term solution - and you need to be quick if you have already upgraded to ios8, is to downgrade to ios7.1.2
This is not officially supported by Apple, but it you google it, it is quite easy, you have to download an ipsw file and then do a restore in itunes, but you will lose everything on the phone, and you cannot back up from a backup made with ios8.
I hope they sort this out, it has driven me mad over the past 2 days.
We need the Toggle between 2G and 3G to be re-instated.

Deploying VIs to the RT causes the value in the Physical Channels of one of the VIs to change to an incorrect value. Why?

Hi all. I've been registered to the forum for a couple of years, but this my first post. I'll try to give as much info as I can.
NIPXIe-1082 chassis
slot 1: PXIe-8133 Embedded Controller
slot 2-3: PXIe-6363 X-Series Multifunction DAQ
slot 4: TB-4353 32-Ch. Thermocouple
slot 5: PXI-4496 Analog Inputs 16-ch
(The second 6363 in slot 3 is a recent addition causing the others to move to higher slot numbers.)
Windows 7
LabVIEW 2011
This code is still being developed to run a test stand, but its based on code from a previous test stand that is being modified for the new one. There are three VIs that are opened and then deployed to the RT. On the Front Panel of one of the VIs is a DAQmx Physical Channel control. The control points to slot 5, but when I deploy the VIs, the control changes to point to slot 3. None of the three VIs have been run yet. I can manually "Reinitialize to Default Value" to get the control to point to slot 5 again, but I shouldn't have to.
I realize that there is a lot I still don't know about NI hardware and LabVIEW. This just seems like it should be a really simple solution and I'll probably have one of those DUH moments when I get told the answer. I'll try to answer whatever questions for more information that I can. Thanks in advance.
-Psiber_Space

Yes, it is defaulted to slot 5. After it changes I can Reinitialize to Default to bring it back.
Two things that I've tried during the week. I've deleted the Physical Channel and then recreated it, but it continued to change upon deployment. Then I simply disconnected the Physical Channel, moved it to an out-of-the-way location on the Block Diagram and then created a new Physical Channel. The old Physical Channel is still changing upon deployment, but the new one stays intact. It seems that as long as the old one isn't deleted, this workaround should work. Except that the problem now seems to be spreading to the other controls on the same VI.
Just today I upgraded from 2011 to 2011 SP1, but the problem is still there. After the upgrade, I tried recreating the LabVIEW project from scratch, but that didn't seem to work either.
I'm going to try contacting NI directly, but if anyone else has any ideas, feel free to continue posting.

Why has my macbook pro serial number changed after getting it repaired?

I just noticed that the serial number in the 'about this mac' information has a different serial number to what is on the back of the macbook pro, which is the same serial number on my apple care/phone . I had a lot of issues with my macbook pro it was sent to repair in july 2013 then in august 2013. Why has the serial number changed? I tried using my original serial number to use the online apple care service however it did not recgonice my serial number when I tried the new serial number it regconised it but said I did not have apple care but I do. I don't know what the apple team have done to my macbook as it requires to go in for repair again.

Was it repaired at Apple or an authorized service provider?
You need to contact the repair place/store and/or call Apple and make them aware of the problem - sooner rather than later. Make sure you give them the repair/case number so they can find the paperwork for it.
I had a logic board replaced and the tech also did not do anything - I called Apple and the tech came back to my house to take care of it. It's important because you want to make sure that your Applecare is being associated with the right serial number.

Why has apple removed the ability to sync calendars, contacts, notes, and what ever by hard wire and is forcing people to use iCloud?

Removing this ability has to be one of the worse moves that apple has made. Beleave it or not some people may not want to connect to use iCloud.

I hate iCloud, too
Never use it. I don't want to trust any of my real important data to remote servers.
Especially don't trust Apple and their servers with personal contacts info, my calendar and appointments info, personal note, etc.
I want the ability back to sync calendars, notes, contacts to my local computer and local storage.

Accessibility, has anyone coded the option to change site colour?

Hi guys,
I have a client that needs their site to be coded with accessibility in mind, I have found a work around for changing the font size but has anyone coded the colour options like on this site http://www.guidedogs.org.uk/ ? Is there an accessibility plugin or anything that BC offers?
Thanks
David

Hi David, that is just all CSS and javascript.
The zoom thing on sites is an old concept and not needed though. Browsers zoom handle that these days.
Colour wise you just have different CSS files and styles and on change of a dropdown or tick with javascript you change the css file and if you want it saved you drop a cookie reference.
That is something as a webdesigner/developer/company is our job to implement, it is not something BC will offer.

Why does Verizon find the need to change the look of web pages and divert you to other pages?

Why is it that verizon can't leave well enough alone! It seems everytime I log in I can't, because verizon wants me to go to another page or change my info, I just want my email, I don't want to learn about new products and new offers, If there is a time I feel te need, I will come looking, don't shove it down my throat! Another big problem is when they force you to change something before they will let you accesss your email, reminds me of a trick the Russians pull! (If you know what I mean!) If I wanted my page to look like microsofts page ,I would have their service. If you feel the need to change so often, maybe you are in the wrong business!

It can be annoying, but I think their motivation is good. They are trying to make things better for their customers and I think they have, even though sometimes it is annoying. I think it would be nice if they would advise us when the pages are going to be down for maintenance, In the mean time, you could have another E mail account so you can always get access to your E mail.

Why has this occurred The file "iTunes Library.itl" does not appear to be a valid iTunes library file. iTunes has created a new iTunes library and renamed this file to "iTunes Library (Damaged)".

My itunes library suddenly that the file “iTunes Library.itl” does not appear to be a valid iTunes library file. iTunes has created a new iTunes library and renamed this file to “iTunes Library (Damaged)”. I use an external hard drive for my Itunes.

The library file appears to have been corrupted. You say you use your external drive but is the whole library on it or only your media? No matter, you will have to rebuild the library file:
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

Why has one of the team seats changed to trial only

Similar Messages

Maybe you are looking for