Why i have to delete the Current word Text if i type wrong Previous word text in the sentence, my fingers are broad cannot accurately point the specific character, I am forced to delete current word text, its really making my mind to get rid of iPhone4.
Why i have to delete the Current word Text if i type wrong Previousword text in the sentence, my fingers are broad cannot accurately point thespecific character, I am forced to delete current word text, its really makingmy mind to get rid of iPhone4.
Hold your finger on the word for a little time - after a second or so, a magnifying view appears showing the few letters around your finger, with a cursor. Roll your finger to move the cursor to just in front of the letter you want to fix. Then let your finger go. You can now backspace to delete and replace the incorrect letter.
Similar Messages
-
i have been getting this message " no sim installed " too many times then my phone goes off , its iphone 4S , its really a problem i cant get calls or anything and im not sure how to take the SIM out then insert it again , what to do ??
Use the sim tool that came with your phone or a safety pin and just insert it into the hole at the side of the sim tray and push it in and then pull it out. It is no more difficult than that and then just close it again.
-
I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.
Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.
-
I have installed Adobe Reader 11.0.07 for Mac OS 10.9.3. Have asked this question numerous time without results. The problems I am having are: I cannot scroll using the side slider on downloaded PDF files, nor can I fill in fillable files. Also, and this is extremely irritating, I cannot re-initialize the same file or initialize and another PDF file after I have initialized the first file. If you cannot help please let me know if should use an earlier version of Reader or find anther company that has the appropriate software.
Perhaps you missed that you started a discussion at I have OS 10.9.2 and have downloaded latest version of Reader 11. I can no longer fill in form or scroll using the side bar. and you did not respond to the last post there.
-
My biggest 'pain' at the moment is that every time I go to change then save a Photoshop CS3 file it says 'cannot save as the file as it has been left open or is in use by another application'
Rule Number One - NEVER go directly uinto the iPhoto library - there are no user servicable parts in it and making any change no matter how small can corrupt your library and cause data or photo loss
Exactly how were you trying to save a copy of your iPhoto library?
Albumdata.xml does not contain your photos - and again NEVER make any changes to the content of the iPhoto library - no dragging - no changes - never go into the library
We need to know exactly what you did
And probalby the easiest solution is to load your backup from before you messed things up
For reference after you get things working
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN -
In an InDesign document that requires 3 different Chapter head paragraph styles (to cope with differrent length headings) I've set up the running heads on the master page with a text variable using the Running header (character style) option. The character style I've assigned to this is an empty character style that is applied to all 3 chapter head paragraph styles.
Some chapter heads require a forced line break, so that the line breaks are aethesically pleasing. On the first page the text variable translates this forced line break as a word space in the running head, but on subsequent pages it ignores the forced line break. This means that if you have a word space before the forced line break, on the first page you get a double word space and on subsequent pages the running head sets correctly with a single word space. But if you remove the word space before the forced line break in the chapter head text, the first running head sets correctly with forced line break interpreted as a single word space, but on subsequest pages the space is closed up.
This only seems to be a problem when the character style option is used for header text variables. If a paragraph style is used the forrced line break is interpreted as a a single word space in all instances, both on the foirst page and subsequent pages.
This would appear to be a bug in how text variables are applied when using the Running header (character style) option. I can't see any other reason why the text variable would beheave differently on the first page and on subsequent pages. There is only one master page, so it isn't a case of their being an error between a main master page and a chapter opener master page.
Does anyone have any solutionss, or know if this problem has been fixed in subsequent releases of InDesign (I'm using CS6 ID version 8.0)
ThanksAsk in the ID forum...
Mylenium -
Last week when the automated upgrade came I said yes and then stopped it midway as it was not a good time to reboot my laptop. Since then, when I try to open it says cannot read configuration file - even when I uninstall and reinstall - still cannot open it with the same error.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
I downloaded MacKeeper and haven't used it. I saw negative reviews and want to delete. However, it won't allow me to drag to the trash bin. Assistance? Suggestions? Thanks!
DO NOT delete the MacKeeper application in the shell.
Remove the "MacKeeper" crapware as follows. First, back up all data.
"MacKeeper" has only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Then a dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall MacKeeper button. All the functional components of the software will be deleted. Reboot.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” "tune-ups," “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it. -
I've had my iPod for over six months and I haven't been able to access FaceTime or iMessage...not to mention my camera stopped working for no reason!
For the camera problem try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order
For FT and Messages:
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
How to get started with iMessage | How To – CNET
iOS 5: iMessage not working – how to fix - Apple Toolbox
Also:
- Go to Settings>General>Time&Date and make sure it is set to Automatic
- Go to Settings>wifi>the connected network and change the DNS to Google's 8.8.8.8
- Settings>General>Reset>Reset Network Settings. You will have to reenter all network passwords. -
I have the TC connected to the comcast modem, with TC in Double NAT mode. I set up the sonos music players ok. But I read that to incresae the wifi signal the TC should be in Bridge mode. Then I cannot get any of the Sonos units to connect to the wifi network.
So two questions, does the Bridge mode give a better wifi signal then double NAT?
Why will sonos not connect to the network when in Bridge mode?A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482 -
I can not get itunes to download to my Windows 7 Pro system on an HP Touchsmart desktop computer. I have attempted to install the itunes 10 no less that 8 times and it never completes the install portion. I had had itunes on this computer for 2 years and it worked well. My ipod is a nono 4th generation. I hd to uninstall the iutnes because we received a nano ipod 6th generation and it would NOT register on this same computer.
I finally installed itunes 10 on my laptop and it worked just fine with Windows 7 Pro and the ipod nano 6th generation worked well on the laptop.
I would like to continue to use my 4th generation device and have the itunes on the desktop but it will not load and install for some reason. Please send any suggestions or solutions.I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users. -
since this morning [1 may] i cannot connect to any bookmarked or other url [except the firefox homepage?!], because the only connection made is to yahoo!search. and even when yahoo!search displays the search result correctly to the site i want to go on, if i click on that i only get returned to yahoo!search again. since i prefer not to use yahoo!search at all, how can i disable yahoo!search permanently?
There are other things that need your attention.
Check that you do not run Firefox in compatibility mode or with a reduced screen resolution.
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
You can check if you have the XML files of the default search engines including Google in the browser\searchplugins folder in the Firefox program folder.
If not then you need to reinstall Firefox.
Try to delete the search.json file and possible search-metadata.json and search.sqlite files in the Firefox profile folder to reset the search engines to the default.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox will rebuild the search.json file from the default search engines in the "browser\searchplugins" folder in the Firefox program folder and the searchplugins folder in the Firefox profile folder. -
I installed Open DNS and can't disable or eliminate it . Its terrible! How can I get rid of it?
They say on their Website I must contact my ISP for assistance.
You need to set other DNS servers on your computer to remove the OpenDNS servers.
*http://kb.mozillazine.org/Error_loading_websites#DNS -
if i open firefox and use it, when i get to last window and close it, if i try to reopen it, it says already open and to close pages but it will not close--the same box keeps coming back
== This happened ==
Every time Firefox opened
== first time i loaded it onto new computer with win 7 64 bitFirefox v 3.6.3 running Win 7 Home premium. About every 6th or 7th time I go to open Firefox from my desktop I receive the same msg as the original poster receives. I must restart to clear up the problem. When I select restart it states a forced shutdown is required and asks if I want to proceed. I click yes, the computer restarts and problem is fixed until the next occurrence.
My thanks for any assistance that may be available.
If you require a screenshot let me know, please include instructions on how to do this though. -
When I'm typing in the key words in the search field, there is a delay between my key stroke and the appearance of the letter in the search field. If I type at a normal speed, usually one or two letters are skipped and have to back track or start over. My key words will appear correctly if I wait for a letter to appear before I enter the next key stroke.
Many of my web pages are slow to load, or they time out.Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Maybe you are looking for
-
Problem Importing Photos from Aperture 3 into iPhoto '11
I store my photos in Aperture 3, but import them into iPhoto to create calendars, cards, etc. I usually work with RAW or high resolution JPG images in Aperture. However, when I import these into the new iPhoto '11, it automatically converts my RAW im
-
IDVD won't ecode audio, 'not responding' = force quit
IDVD 6 /10.4.7/MACPRO iDVD won't encode audio portion from iMovie had off. original iMovie from DV camera, iMove encodes QT, etc iDVD encodes video ( as noted by time bar) but when it gets to the audio portion it stops responding and then I have to f
-
How to find BADI for the enterprise service?
Hi Experts, We are enhancing an enterprise service for Businesspartner creation by adding an additional field in the structure. But we are not able to find out the correct BADI for the enterprise service. We are using the following enterprise ser
-
QUERYING TWO TABLE BUT not rquired 99% of the time
I have two tables EMPLOYEE AND DEPARTMENT. Most of the time I require to query only employee table (99% of the time),but there are times when I have to query department table to get details about department select e.emp_id,e.emp_age,e.department_desc
-
How To Modify Interactive Report Search Input?
Hello All, I am running version 3.2 and attempting to modify (validate) the search input value on an interactive report. For example, after a user enters a string in the search textbox, I want to strip any space characters from the string and perform